How to pick dates using Datenavigator UI element.

Hello,
If I use DateNavigator UI element and if I select first date and last date how do i get all the dates in that period.
Regards,
Rahul

Hi Rahul,
there is no need to use date navigator.
1. insert the input field UI element.
2. mapping the corredponding attribute.
3. select the attribute properties Data type----> Date
hope that u will achieve uer requirment
Regards,
P.Manivannan

Similar Messages

How to insert data in table UI elements

Hi Guys,
Here is my questions. How to insert data in table UI elements.
Here i try to insert data by using Add button
data:
    Node_Item                           type ref to If_Wd_Context_Node.
    Node_Item = wd_comp_controller->get_data_node( ).
data:
    lr_table_line type ref to ITEM.
   lr_table_line = Node_Item->create_element( ).
field-symbols:
    <ls_table> type any.
assign lr_table_line->* to <ls_table>.
Node_Item->bind_element(
    new_item             = <ls_table>
    set_initial_elements = abap_false
    index                = 1 ).
But i got syntax error the result type of the function method cannot not be converted in to the type of lr_table_line.
And i set cardinality and selection as 0.n.
Pls, let me know for the soulutions
Chandru
Message was edited by:
        chandrasekar muthuvelraj

Chadru, another option is for you to bind the table UI field to an internal table and to populate the internal table. Then, automatically, your Table UI field will be populated with the data from the internal table. Here is the code that does that and works for me. Good luck!
method FILL_DATA .
DATA: node_level1 type ref to if_wd_context_node,
      node_level2 type ref to if_wd_context_node,
      node_items type ref to if_wd_context_node,
      stru_ResItems type BAPI2093_RES_ITEM,
      tab_ResItems TYPE TABLE OF BAPI2093_RES_ITEM,
      n type i.
node_level1 = wd_context->get_child_node( name = 'BAPI_RESERVATION_CRE' ).
node_level2 = node_level1->get_child_node( name = 'CHANGING' ).
node_items = node_level2->get_child_node( name = 'RESERVATIONITEMS' ).
n = 2.
do n times.
    insert stru_ResItems into table tab_ResItems.
enddo.
node_items->bind_table( tab_ResItems ).
endmethod.

A relative synced my iphone with his laptop without me knowing. It had a passcode on the phone but the sync still worked. I have since found out he is quite IT knowledgeable and has been known to track other peoples phones. How is this data useful to him

A relative synced my iphone with his laptop without me knowing. It had a passcode on the phone but the sync still worked. I have since found out he is quite IT knowledgeable and has been known to track other peoples phones that he wants to know information about. How is my data useful to him and can he restore this data on another iPhone and run it parallel to mine? I have had people send me messages which I have not received. These have been screen shot to me later including time and I have just not got them. I had 4 weeks worth of messages go missing from my phone..I know that he synced my phone because his work laptops I'd came up in my settings. Also if the above can be done can he change the settings on my actual phone and access my location without placing tracking software on my phone. Can someone please help here as I can't restore a backup to my phone for obvious reasons and refuse to change my number because of this loser.

Connect the device to the computer.
In iTunes, select the content desired to sync.
Sync.
This is all described in the User's Guide, reading it may be a good place to start.

How to put data into a array element in the BPEL

Hi,
I have a element in the WSDL which is of type Array. (i.e accepts unlimited data for the same element). How should i put a data into a array in the BPEL.
Example:
The below Example gives u an idea about wht iam asking:pasting a piece of my requirement:
<s:element minOccurs="0" maxOccurs="1" name="parameters" type="tns:ArrayOfCSParameters" />
<s:complexType name="ArrayOfCSParameters">
<s:sequence>
<s:element minOccurs="0" maxOccurs="unbounded"
name="CSParameters" nillable="true" type="tns:CSParameters" />
</s:sequence>
</s:complexType>
<s:complexType name="CSParameters">
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="RevenueItem" type="tns:RevenueItem" />
<s:element minOccurs="0" maxOccurs="1" name="AccountURIs" type="tns:ArrayOfString" />
<s:element minOccurs="0" maxOccurs="1" name="GroupURIs" type="tns:ArrayOfString" />
<s:element minOccurs="1" maxOccurs="1" name="Percentage" nillable="true" type="s:decimal" />
</s:sequence>
<s:attribute name="Version" type="s:decimal" use="required" />
<s:attribute name="URI" type="s:string" />
</s:complexType>
Any suggestion is appreciated.
Regards
pavan

You have 2 options i guess.
Use the transformation and the for-each to construct the array-list
or like Richard said, use a loop in bpel, assign in the loop an variable of element type="CSParameters" and append this variable to your variable with accepts the arraylist.

How to retrieve data using logical database and custom select options

Hi all,
I have a selection screen which is displayed by logical database PSJ and I have two select options of my own. I need to retrieve data based on both selection screen of logical database and my own select options. How can I do it?
Thanks in advance.

Hai Gupta
Check the following Document & Links
1. A logical database is in fact
a program only.
2. This LDB provides two main things :
a) a pre-defined selection screen
which handles all user inputs and validations
b) pre defined set of data
based upon the user selection.
3. So we dont have to worry about from
which tables to fetch data.
4. Moreover, this LDB Program,
handles all user-authorisations
and is efficient in all respects.
5. tcode is SLDB
good info about Logical Database. you can check the link.
http://www.geekinterview.com/question_details/1506
http://help.sap.com/saphelp_46c/helpdata/EN/35/2cd77bd7705394e10000009b387c12/frameset.htm
Re: How to Create and Use ldb in reports?
Re: Logical databases
http://help.sap.com/saphelp_46c/helpdata/en/9f/db9bed35c111d1829f0000e829fbfe/frameset.htm
Functions for displaying and changing logical databases:
Call Transaction SE36 or
Choose ABAP Workbench -> Development -> Programming environ. -> Logical databases
Interaction between database program and report:
During program processing, subroutines are performed in the database program and events are executed in the report.
To read data from a database tables we use logical database.
A logical database provides read-only access to a group of related tables to an ABAP/4 program.
advantages:-
The programmer need not worry about the primary key for each table.Because Logical database knows how the different tables relate to each other,and can issue the SELECT command with proper where clause to retrieve the data.
i)An easy-to-use standard user interface.
ii)check functions which check that user input is complete,correct,and plausible.
iii)meaningful data selection.
iv)central authorization checks for database accesses.
v)good read access performance while retaining the hierarchical data view determined by the application logic.
disadvantages:-
i)If you donot specify a logical database in the program attributes,the GET events never occur.
ii)There is no ENDGET command,so the code block associated with an event ends with the next event
statement (such as another GET or an END-OF-SELECTION).
1. transaction code SLDB.
2.enter name z<ldb-name>
3.create
4.short text
5.create
6. name of root node (here Ekko)
7. enter short text (f6)
8.node type -> data base table.
9.create
10 change logical DB
riht click on ekko and insert node
here node name ekpo
11.create
12. click on selections
13. press no Should the changed structure of Z<ldb name> be saved first.
14.select tables which you want to join.
15.transfer
16 now you have to o to coding part.
17. save
activate.
19.click to src code
double click on first include and activate
Regards
Sreeni

How to read data using SQLGetData from a block, forward-only cursor (ODBC)

Hi there. I am trying to read data a small number of rows of data from either a Microsoft Access or Microsoft SQL Server (whichever is being used) as quickly as possible. I have connected to the database using the ODBC API's and have run a select
statement using a forward-only, read-only cursor. I can use either SQLFetch or SQLExtendedFetch (with a rowset size of 1) to retrieve each successive row and then use SQLGetData to retrieve the data from each column into my local variables. This
all works fine.
My goal is to see if I can improve performance incrementally by using SQLExtendedFetch with a rowset size greater than 1 (block cursor). However, I cannot figure out how to move to the first of the rowset returned so that I can call SQLGetData to retrieve
each column. If I were using a cursor type that was not forward-only, I would use SQLSetPos to do this. However, using those other cursor types are slower and the whole point of the exercise is to see how fast I can read this data. I can
successfully read the data using a block forward only cursor if I bind each column to an array in advance of the call to SQLExtendedFetch. However, that has several drawbacks and is documented to be slower for small numbers of rows. I really
want to see what kind of speed I can achieve using a block, forward-only, read-only cursor using SQLGetData to get each column.
Here is the test stub that I created:
' Create a SELECT statement to retrieve the entire collection.
selectString = "SELECT [Year] FROM REAssessmentRolls"
' Create a result set using the existing read/write connection. The read/write connection is used rather than
' the read-only connection because it will reflect the most recent changes made to the database by this running
' instance of the application without having to call RefreshReadCache.
If (clsODBCDatabase.HandleDbcError(SQLAllocStmt(gDatabase.ReadWriteDbc, selectStmt), gDatabase.ReadWriteDbc, errorBoxTitle) <> enumODBCSQLAPIResult.SQL_SUCCESS) Then
GoTo LoadExit
End If
Call clsODBCDatabase.HandleStmtError(SQLSetStmtOption(selectStmt, SQL_CONCURRENCY, SQL_CONCUR_READ_ONLY), selectStmt, errorBoxTitle)
Call clsODBCDatabase.HandleStmtError(SQLSetStmtOption(selectStmt, SQL_CURSOR_TYPE, SQL_CURSOR_FORWARD_ONLY), selectStmt, errorBoxTitle)
Call clsODBCDatabase.HandleStmtError(SQLSetStmtOption(selectStmt, SQL_ROWSET_SIZE, MAX_ROWSET_SIZE), selectStmt, errorBoxTitle)
If (clsODBCDatabase.HandleStmtError(SQLExecDirect(selectStmt, selectString, Len(selectString)), selectStmt, errorBoxTitle) <> enumODBCSQLAPIResult.SQL_SUCCESS) Then
GoTo LoadExit
End If
' Cursor through result set. Each time we fetch data we get a SET of rows.
sqlResult = clsODBCDatabase.HandleStmtError(SQLExtendedFetch(selectStmt, SQL_FETCH_NEXT, 0, rowsFetched, rowStatus(0)), selectStmt, errorBoxTitle)
Do While (sqlResult = enumODBCSQLAPIResult.SQL_SUCCESS)
' Read all rows in the row set
For row = 1 To rowsFetched
If rowStatus(row - 1) = SQL_ROW_SUCCESS Then
sqlResult = clsODBCDatabase.HandleStmtError(SQLSetPos(selectStmt, row, SQL_POSITION, SQL_LOCK_NO_CHANGE), selectStmt, errorBoxTitle)
Call clsODBCDatabase.SQLGetShortField(selectStmt, 1, assessmentRollYear(row - 1))
Console.WriteLine(assessmentRollYear(row - 1).ToString)
End If
Next
' If the rowset we just retrieved contains the maximum number of rows allowed, there could be more data.
If rowsFetched = MAX_ROWSET_SIZE Then ' there could be more data
sqlResult = clsODBCDatabase.HandleStmtError(SQLExtendedFetch(selectStmt, SQL_FETCH_NEXT, 0, rowsFetched, rowStatus(0)), selectStmt, errorBoxTitle)
Else
Exit Do ' no more rowsets
End If
Loop ' Do While (sqlResult = enumODBCSQLAPIResult.SQL_SUCCESS)
The test fails on the call to SQLSetPos. The error message I get is "Invalid cursor position; no keyset defined". I have tried passing SET_POSITION and also SET_REFRESH. Same error. There has to be a way to do this!
Thank you for your help!
Thank You! - Andy

Hi Apelkey,
Thank you for your question.
I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
Thank you for your understanding and support.
Regards,
Charlie Liao
TechNet Community Support

How to transfer data using the clipboard

Does anyone know how to transfer data (string) from the clipboard to labview?
I am trying to write C++ code using win32 API using the calls, OpenClipboard, Getclipboard and CloseClipboard functions. The problem is LV crashes when there is a call to the library function. Perhaps I am going about this the wrong way.
Any ideas are appreciated.

Perhaps this approach will give you the answer. I wrote a VI that uses the Win32 API directly. It calls OpenClipboard with the calling VI's window handle, then calls GetClipboard with the GW_TEXT constant to get a memory block handle. I lock the memory block with GlobalLock so other applications can't mess with it. I next call lstrcopynA , initializing a arg1 as a C String with 256 bytes and using the memory block handle as arg2, with the length of arg1 minus one as arg3. Your clipboard text is in the string output. Now call GlobalUnlock and CloseClipboard and you're done!
Attachments:
getclipboarddata.llb ‏168 KB

How to Select data using same column name from 3 remote database

Hi,
Can anyone help me on how to get data with same column names from 3 remote database and a single alias.
Ex.
SELECT *
a.name, b.status, SUM(b.qty) qantity, MAX(b.date) date_as_of
FROM
*((table1@remotedatabase1, table1@remotedatabase2, table1@remotedatabase3)a,*
*(table1@remotedatabase1, table1@remotedatabase2, table1@remotedatabase3)b)*
WHERE b.dept = 'finance'
AND a.position = 'admin'
AND a.latest = 'Y' AND (b.status <> 'TRM') AND b.qty > 0;
GROUP BY a.name, b.status ;
NOTE: the bold statements is just an example of what I want to do but I always gets an error beacause of ambiguous columns.
Thanks in advnce. :)
Edited by: user12994685 on Jan 4, 2011 9:42 PM

user12994685 wrote:
Can anyone help me on how to get data with same column names from 3 remote database and a single alias.Invalid. This does not make sense and breaks all scope resolution rules. And whether this is in a single database, or uses tables across databases, is irrelevant.
Each object must be uniquely identified. So you cannot do this:
select * from (table1@remotedatabase1, table1@remotedatabase2, table1@remotedatabase3) a3 objects cannot share the same alias. Example:
SQL> select * from (dual, dual) d;
select * from (dual, dual) d
ERROR at line 1:
ORA-00907: missing right parenthesisYou need to combine the objects - using a join or union or similar. So it will need to be done as follows:
SQL> select * from (select * from dual d1, dual d2) d;
select * from (select * from dual d1, dual d2) d
ERROR at line 1:
ORA-00918: column ambiguously definedHowever, we need to have unique column names in a SQL projection - so the join of the tables need to project a unique set of columns. Thus:
SQL> select * from (select d1.dummy as dummy1, d2.dummy as dummy2 from dual d1, dual d2) d;
DUM DUM
X X
SQL> I suggest that you look closely at what scope is and how it applies in the SQL language - and ignore whether the objects referenced are local or remote as it has no impact to fundamentals of scope resolution.

How to transfer data using Lsmw with Recording...

hi,
Please let me know .How to use Lsmw to transfer data using recording.
Thanks,
Lawrence.

Hi Lawrence,
please go thru this link for LSMW data transfer techniques in PM, MM and SD modules.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/90d90895-68dd-2a10-f096-bf8cf2e2f65b
If u want to know in detail go thru this link
http://help.sap.com/saphelp_nw04s/helpdata/en/87/f3ae74e68111d1b3ff006094b944c8/frameset.htm
Hope this will be useful to u..
Thanks
Vijayasree

How to get data using JDOM

Hi,
I have this xml file stored in operator.xml
<Operator>
     <Customer>
          <Name>sam</Name>
          <Street>albert str.</Street>
          <ZipCode>45454</ZipCode>
          <City>NY</City>
          <Country>USA</Country>
          <EMailAddress>[email protected]</EMailAddress>
          <MeterNumber>1000</MeterNumber>
          <MeasuringUnit>kWh</MeasuringUnit>
          <Reading>
          <Month>1</Month>
          <Value>900</Value>
          </Reading>
          <Reading>
          <Month>2</Month>
          <Value>725</Value>
          </Reading>
          <Reading>
          <Month>3</Month>
          <Value>950</Value>
          </Reading>
     </Customer>
</Operator>I have the following getter statements in my code:
String name=req.getName();
int month=req.getMonth();Now, I want to get value for particular customer (by checking name for equality with getter) and for particular month( by checking for equality with getter).
I have written the following statements:
final String filename="operator.xml";
SAXBuilder builder=new SAXBuilder(true);
Document doc=builder.build(filename);
Element root=doc.getRootElement();How to proceed further using JDOM. I am confused with getChild(), getChildText() etc.,
thanks,

Obtain values with the JDom XPath class selectSingleNode and selectNodes methods.
SAXBuilder saxBuilder=new SAXBuilder("org.apache.xerces.parsers.SAXParser");
org.jdom.Document jdomDocument=saxBuilder.build(new File("c:/input.xml"));
org.jdom.Element zipcodeNode= (org.jdom.Element)(XPath.selectSingleNode(jdomDocument,"/Operator//Customer/zipCode"));

How to upload data using SXDA Transaction

HI,
Can any one explain step by step procedure to upload data using SXDA transaction.
I have already uploaded to txt file in Application server.
I have created a project and entered into the sub-project wizard and selected the object type as BKPF and then pressed continue, then i enter into task tab....
There i see convert data , Check file,File split,load data,
In convert data i have selected the program name as RFBIBL00.
In check file i have selected the file type as Physical file and selected the file name from F4 button.
I am fasing the probelm in load data ....
Can any one please explain how to proceed further..

Hi Yogesh,
Use this function module
ALSM_EXCEL_TO_INTERNAL_TABLE to upload the excel sheet data into internal table.
Then from the internal table data use KE13 transaction to upload data.
Regards
Arun

How to upload data using utl_file when you dont know the exact file name

Hi
i want to upload data from a flat file to a table.
i dont know the exact file name. i want to make a search for filename. like i want to make a search on file (say test*) which will give me all the files with test.
i want to upload data using these files.
how can i do this by using UTL_FILE.
Regards
Manish

Thank you very much.
Thing is previously we are using sqlloader and shell script for loading the data.
now i am creating a procedure (if possible without parameters).
Is there any other way i can do that.
can i make a wild card search using utl_file.
Thanks n Regards
Manish

How to upload Data using Transaction 'KE13'

Hi friends ,
please explain how to upload excel file data using transaction code 'KE13'.
HOW TO CREATE Excel pleaseexplain.
Regards,
Yogesh

Hi Yogesh,
Use this function module
ALSM_EXCEL_TO_INTERNAL_TABLE to upload the excel sheet data into internal table.
Then from the internal table data use KE13 transaction to upload data.
Regards
Arun

Is there any way to pick data using file adaptor without using polling

Dear All,
I am looking for a way by which file adpter can pick data in non polling mode.
is it possible ?
Best regards
arc

Can you explain a little more on your use case. There is a function called sync read, which is part of the File/FTP adapter which allows you to read a file mid process. Not sure if this will meet your requirements.
cheers
James

How to load data using two maps for the same source file in Import Manager

Hi,
I am trying to load the source data to MDM using two map files, since one map is too big (creating memory error).
However the first map data able to see after loading (SAP data) but when loading second map(nonSAP data) using the remote key to match the previously loaded SAP key ,even if MDM is processing the data it is not reflecting in data manager.
Is there any reason for this.
Appreciate your suggestion and tips on this.
regrds,
Reo

Hi Reo,
As ur requirement seems,In the second pass perform recording matching by select default import action as "<b>update null fields only"</b> for those data records which are matching and "<b>create</b> " for those data records which are not matching with previous data records from SAP system.
If you define "update null fields only", then only the key of the new record from NON SAP will get appended to the existing record. And if you select "create" then it will create new records and will apply NON SAP key on it.
Please check the remote key values using data manager.Key is applied in the records or not.
Remember that import maps are client specific. Remote key comprises of both key and client system.So be sure that you are connecting to two different client systems.
I have tried this and this is working fine on my system.
Thanks,
Shiv Prashant Dixit
Thanks,

How to pick dates using Datenavigator UI element.

Similar Messages

Maybe you are looking for