How to play flv files on n8 belle

is there any trick or video player to play flv file on n8 belle

@gudboy52
Hopefully Belle Refresh should shortly be available to you.
Happy to have helped forum with a Support Ratio = 42.5

Similar Messages

  • C7: How to play .FLV files on Nokia C7

    Can I ask how do you play .FLV files on Nokia C7? I searched for FLV player in the Ovi Store and nothing is returned, whereas on Android Market loads of FLV players are available.

    I couldn't find an FLV player either. But you can download freemake video converter from internet. Its really a very good converter and I transfer my vids to C7 only after converting to C7 resolution because it makes the processor to do less work. If you transfer an HD vid directly to phone it will play fine but will cost u battery life. (more processor usage)

  • How to play flv files

    My computer can play flv from sites like youtube but when I
    have the file on my desktop and try to open it directly with I this
    will not work. It does work with SWF files though. So, the
    questions are:
    - Can I get IE to play the FLV files?
    - Is there a way to get Media player to play them?
    - Is there a standalone player which will play them?
    - Is there a way to convert them to AVI?

    @gudboy52
    Hopefully Belle Refresh should shortly be available to you.
    Happy to have helped forum with a Support Ratio = 42.5

  • How to play flv files in nokia x6?

    Is there any software to play flv videos and certain mp4 files dont work on my x6. Whats the matter? Whichformats i can play?
    Nokia x6

    hi scoobyman
    thanks for replying. do you mean nokia 5233 does not support .flv format .that why i have to convert it other format such as avi or wmv etc. Are you sure it does not support .flv player.actually there is inbuild support for streaming videos from youtube.

  • How to play flv-files with Flashplayer

    Hello,
    I encoded avi's getting flash 8 flv's; I used Adobe Première Pro CS3 and Adobe Flash Encoder as well.
    I would like to play these flv's with Flashplayer 8; how should I proceed?
    With the VLC-player 0-8-6c the flv's are displayed nicely.
    Thank you very much,
    Marc

    Flash video is played in a browser with the Flash plug-in installed. The video needs to be authored in Flash where a player interface is created. The video is either embedded in a web page or linked to the page. The player interface is downloaded with the video from the host.

  • How to create a .f4m manifest files to play .FLV files

    I typically use .f4v files for my on demand playback media files, however I converted a .mov to a .flv file...  How do I create a .f4m and .m3u8 manifest file that plays .flv files?  Below is the code I normally use for the .f4m and .m3u8 files.  This works great with .f4v files.  I also included my player code.  What am I doing wrong?  The only difference is I'm using a .flv that I didn't use the f4vpp cleaner on..  That shouldn't give me the parse error I'm getting.
    022714.f4m is the name of my .f4m Flash manifest file.  Below are the contents.
    <manifest xmlns="http://ns.adobe.com/f4m/2.0">
      <baseURL>http://IPaddress/hds-vod/</baseURL>
      <media href="02-27-14-640-480.f4v.f4m" bitrate="1000"/>
      <media href="02-27-14-320-240.f4v.f4m" bitrate="450"/>
      </manifest>
    022714.m3u8 is the name of my HTML 5 manifest.  Below are the contents.
    #EXTM3U
    #EXT-X-STREAM-INF:PROGRAM-ID=1,BANDWIDTH=1000000
    http://IPaddress/hls-vod/02-27-14-640-480.f4v.m3u8
    #EXT-X-STREAM-INF:PROGRAM-ID=1,BANDWIDTH=450000
    http://IPaddress/hls-vod/02-27-14-320-240.f4v.m3u8
    Flash multi bit rate player
    <object width="448" height="336">
    <param value="http://IPADDRESS/strobeplayer/StrobeMediaPlayback.swf" name="movie">
    <param value="src=http%3A%2F%2FIPADDRESS%2Fvod%2F022714.f4m&amp;streamType=recorded&amp;autoPlay =false" name="flashvars">
    <param value="true" name="allowFullScreen">
    <param value="always" name="allowscriptaccess">
    <param value="direct" name="wmode"><embed src="http://216.37.94.194/strobeplayer/StrobeMediaPlayback.swf" type="application/x-shockwave-flash" flashvars="src=http%3A%2F%2FIPADDRESS%2Fvod%2F022714.f4m&amp;streamType=recorded&amp;auto Play=false" wmode="direct" allowfullscreen="true" allowscriptaccess="always" height="336" width="448"></object>
    HTML5 player
    <p style="text-align: center;"><a href="http://IPaddress/vod/022714.m3u8"><img alt="" src="/portals/0/Silver-Play-Button.jpg" style="width: 150px; height: 151px;" />

    to create a file in appl server you have to use open dataset and close data set..
    see the sample code
    REPORT zanid_test MESSAGE-ID zz .
    parameters:  FULLPATH(128) obligatory lower case
                          default 'E:\usr\sap\put\file.txt'.
    *you change the appl sever path as per your config.
    DATA : BEGIN OF list_asc OCCURS 0,
            msg(300) TYPE c,
           END OF list_asc.
    start-of-selection.
    *---populating data
    list_asc-msg = 'abcdefghijkl'. "your sample data
    append list_asc.
    list_asc-msg = 'faagoaagiagig'. "your sample data
    append list_asc.
    OPEN DATASET fullpath FOR OUTPUT IN TEXT MODE.
    LOOP AT LIST_ASC.
          TRANSFER  LIST_ASC-MSG TO fullpath.
          CLEAR LIST_ASC-MSG.
    ENDLOOP.
    CLOSE DATASET fullpath.
    now if you go to appl server , you will find that file in that specified path..
    to create a directory yu can go to transaction AL11 and click the 'konfigurieren'button, you then you can specify the directory attibutes to create a directory
    and to load a file from your loacl pc to appl server you can use transaction CG3Y also, instead of the abap code.
    plz rewrad points if it helps you.

  • How to play video files that are in Drop box on iPod?

    How to play video files that are in Drop box on iPod?

    I am going to have to write a technote about this, because it comes up a lot.
    Flash Player itself is designed to play SWF content as a browser plugin or as an ActiveX control (when it's IE Windows).
    There is a standalone Flash Player, but that's something Adobe  provides directly as a feature of Flash CS4 Professional. It gets installed with Flash. We have made some standalone players available on http://www.adobe.com/support/flashplayer/downloads.html, but not all (and I don't know why.  Looking into it)
    There are numerous 3rd party standalone SWF players out there though.  Some designed to just play video, others that play full SWF. I suggest a google search of 'play SWF standalone' and read the results.
    On the Mac, consumers who want to play SWF content off their desktop can use the Adobe Media Player. You can import a local SWF (and FLV and other video) and play it in AMP.  Get it here:
    http://www.adobe.com/products/mediaplayer/
    That's Mac only, doesn't work on Windows.

  • Play flv file in Adobe Flash Player

    I am new to flash. Can the Adobe Flash player play an
    external flv file directly? I tried and it can't play. It looks
    like the flash player can only play swf file. How does the flv file
    get played by the Adobe Flash Player?
    Thanks.

    hhhzzz wrote:
    > I am new to flash. Can the Adobe Flash player play an
    external flv file
    > directly?
    No it can't, you need SWF to load the file within.
    Best Regards
    Urami
    Beauty is in the eye of the beer holder...
    <urami>
    If you want to mail me - DO NOT LAUGH AT MY ADDRESS
    </urami>

  • Nokia 5800 won't play flv files

    I've had my 5800 for about half a year. My Software version is V31.2.101 (this is the most up-to-date version I can have according to my Nokia Software Updater)
    For some reason when I try to play flv files (approx. 30-100mb), a completely white screen shows up with a "broken" flashplayer symbol in the upper left corner.
    What's wrong? How do I play flv files on my Nokia?
    I've read in lots of places before that the 5800 can play flv files straight out of the box. =/ mine can't
    btw, I can play mp4 files, but it's a pain because I have to convert the flv files first
    and I have Adobe Flash Lite 3.1 installed. (atleast that's what it says when I select a video and go to "Options" - "About application")

    As far as I was aware, the 5800 didn't play FLC - it certainly isn't listed here:
    http://www.forum.nokia.com/Devices/Device_specifications/5800_XpressMusic/
    However, even if it was possible, it may depend on the way the FLVs were encoded - things like the frame rate could cause playback incompatibilities.

  • Flash CS5 unable to play .FLV files on Macbook Pro

    I have a colleague who is trying to put together a Flash package for me  on her macbook pro.  It needs to play an flv file. She is unable to play  flv files on her computer either in Flash or using the Adobe Media  Player. I have no problem playing the same files on my macbook pro,  we're both running the latest OS and have version 1.8 of Adobe Media  Player.
    She went to the Adobe site to download the latest version of Adobe  Media Player, hoping that might include whatever component is missing on  her system. Because of Adobe's decision not to distribute AMP that  didn't help.  She has Flash Professional CS5 11.0.2 on her system.  When  she imports an flv video into a Flash project and tries to play it she  gets an error message saying it can't stream the video. Note that the  video is on her hard drive, it is NOT on the internet so no streaming  should be required.
    The actual error message is: "the video player is in the connection  error state. It enters this state when a video stream attempted to load  but was unsuccessful. There are two possible reasons for the error: no  connection to the server or the stream was not found."
    Since it's a file on her hard drive, and she has loaded the file  into the Adobe development environment successfully, the one thing we  know for certain is that neither of these reasons is correct. Something  is obviously missing on her system, what is it and what can we do to fix  it?

    I'm getting error too (Error #2044: Unhandled NetStatusEvent:. level=error, code=NetStream.Play.StreamNotFound). I'm getting this with CS5. This file was previously made in CS4 and never got this error.
    Everything (fla and flv too) is on external hard disk.
    As this work requires to be exported to mov, I've found out that everything needs to be on the mac (don't know for pc), like on desktop.
    So, let me wrap up disadvantages I got with Flash CS5:
    - TextField.embedFont makes the font disappear in CS5, so I can't use it, so I can't "play" with text in a comfortable way (in CS4, with embedFont = true, I was able to rotate and stuff). Now I have to make a bitmap out of it. It means 3 lines of code and a new variable, instead of just an easy one.
    - I have to rebuild my entire source path structure for AS classes, as my old one (that took me years of effort to be reasonable and used to work just fine in CS4).
    - I have to move stuff from my hard drive to the desktop, to make flv be played and to make a mov out of my animation.
    CS5 is making my job harder and making me lose a lot of time to find out errors that have no good reason to exist (it was not error. just "place CS5 doesn't like").

  • Flash Player 10.2.152.32 won't play FLV file

    I seem to be having similar problems to several others here.
    I am running Windows XP, SP3, 32 bit on Dell Pentium 4, 2Gigs of RAM, 3.0Gig HD.
    Since the March 8, 2011 update I have not been able to play FLV files.  Previous to the upgrade, I was able to play these same files.
    I have checked - Shockwave Flash Object (VS 8.0.24.0) is apparently installed and enabled, although it DOES NOT show up in the file list (that I can tell at least) in the System32/Macromedia folder.  It may be called something else perhaps?  These are the files that show as updated on March 8, 2011.
    Flash10n.ocx - Active X Control
    FlashInstall - text file
    FlashUtil10n_ActiveX - application
    FlashUtil10n_ActiveX.dll - application extension
    Files with previous dates are:
    flashplayer.xpt - XPT file, install - text document - dated Feb 17, 2010, NPSWF32.dll - dated Nov. 20, 2007, and NPSWF32_FlashUtil - also dated Nov. 20, 2007.
    I can play stuff from YouTube.  I am able to see the Flashy thing turn on the link you supplied to others here.
    My security is set to "Medium".  I have had NO virus issues, and run a VERY tight anti-virus protocol with AVG, AdAware and SpyBot all active, updated either daily (automatically) or weekly (manually).
    Should I uninstall and then re-install, so the SFO will be included, or is there a way to retrieve the (apparently) missing Shockwave Flash Object file on its own?  This issue has now taken up my entire evening, and I am ready to PERMANENTLY delete Flash from my life!
    Thanks,

    Hi, you don't need to scream at me. I've been on the Forum 12 hours today and 12 hours yesterday helping users with their problems. This past week I had over 1,000 email notifications in my email account and 90% were from the Flash Player Forum.
    And this:Let's try again..........arrrrrrrghhhhhhhhhhhh!!!!
    Please don't insult me and act like I don't know what I'm doing or talking about.
    The Shockwave Flash Object is not supposed to be in the System32 ...Flash file location. It is never there. It is always in the addons of the browser, it must be since it is the Flash Player Control. Without it and without it being the correct version(which yours is not) Flash Player cannot work! I repeat, Flash Player is a browser plugin and works thru the browser.
    The fact that you have a 32bit OS doesn't tell me anything about what browsers you use. I have a 32bit OS, but I use IE6 on one and the other PC I use IE8.
    I know you checked some of my posts, I'm not so dumb that I don't recognize my own writing.
    Yes, you need to Uninstall and Install again, that is the only way you are going to have the correct SFO Installed.
    If you'd tone it down some, I may give you the best way to do that in order to be successful in that.
    However, it won't be tonight. Maybe you'll be in a better mood tomorrow.
    Regards,
    eidnolb

  • Looking for some info on how to play music files on IPAD2

    Hi and thanks for sharing.  Trying to figure out how to play sound files such as wavs or mp3s on my ipad2 while I browse the internet or use my computer.  I was trying to see if the music feature will play my songs or if I can import downloaded files from the net to itunes and if that will play in the background.  I have an audio program that can send sound files to email and was trying to figure out how, similarly, to get this play in the background while I do things too.  That and sound files downloaded from the internet.   Do these go to iCloud when you download them?  Can I import sounds into itunes with my iPad someway.  (It's the only computer or device I own).   Basically looking for a pathway to get music from my audio program that's sent to email, and clips I've DLed off sites on the internet, to play while I use the pad or browse the net.  Thanks for your intel on the mission.   Cheers!

    The only way to get content into the Music app is via iTunes store downloads or syncing with itunes on a computer. You will need to find a third party media player such as VLC (whick integrates with DropBox and GoogleDrive, if that appeals to you).

  • How to play *.avi files in solaris10 sparc

    hi frnds
    can some body tell me how to play avi files in solaris
    or is thr any binary packages ( but plese dont tell me abt source files i am fed up of compiling :) & ) if any binary packages r avilable
    please tell me or how to play in solaris 10 sparc version
    thanx & REGARDS
    chakri

    http://perian.org for your AVI files and http://flip4mac.com to play most WMP files via QuickTime Player.

  • How to play .mod files on iPad 2

    How to play .mod files on iPad 2

    There appear to be a number of apps that support .mod files e.g. ModPlayer, Interocitor. Try searching for '.mod file' or 'mod player' and see what's available in your country's store.

  • HT3775 how to play .ram files on iMac ?

    how to play .ram files on iMac ?

    Greetings,
    If I had any Real Audio files I could tell you.
    Try a few different players:
    VLC says they have "partial" support: http://www.videolan.org/
    MPlayer: http://mplayerosx.sourceforge.net/
    Perian: http://perian.en.softonic.com/mac
    Hope one of those work for you.

Maybe you are looking for