How to pop up a login screen when using menu?

I have created a Menu. Now I want to create a login form, means login form will be the first form where there will be a button of log in. As soon as an user click that button a login screen should be popped up. Then user will enter the login id and password and then he is connected. Now he/she can access to other forms in the menu. Could you please tell me how to do that?

You can start a form without login in by putting "null;" in the on-logon trigger and the put logon in the menu that you want the user to select to login.
Search this forum for the login code. It has some finer points when it comes to exception handling that are not obvious.

Similar Messages

How to Bypass Windows 7 Login Screen When Forgot Admin Password

When forgot Windows 7 administrator login password and be stuck at the login screen what can you do? Believe that many people have encountered such a situation where they are locked out of their own computer for forgotten Windows administrator password. So today I would like to talk about several tricks on how to bypass Windows 7 login screen when forgot administrator login password. Trick 1: Reset Windows 7 admin password with password reset diskIf you have ever created a Windows password reset disk for that administrator account before you forgot its password it is easy to use it to reset or remove its password. Just insert the disk into your locked Windows 7 computer and click ¡°Reset Password¡± link on the login screen. Then follow the password reset wizard to perform password reset. This is the easiest way to bypass a Windows login screen when forgot administrator password. Trick 2: Change Windows 7 admin password in Safe ModeIf you have no password reset disk you have to look for other tricks to bypass your Windows 7 administrator password. So if you have enabled the built-in administrator account you can enter Safe Mode by pressing F8 when your computer is booting. And access that built-in administrator account to change other user password. Trick 3: Bypass Windows 7 Login screen with Windows Password RescuerIf the forward 2 tricks don't work, it is necessary for you to use an effective Windows Password Recovery tool like Daossoft Windows Password Rescuer. Steps are as below.Step 1: Download and install Daossoft Windows Password Rescuer into another accessible computer.Step 2: Launch this tool and follow its instruction to burn it to a USB/CD/DVD flash drive.Step 3: Boot your locked Windows 7 computer from the flash drive.Step 4: Follow its instruction to reset/remove your Windows administrator password. Detailed video tutorial :How to Remove or Bypass Windows 7 Administrator Password - Forgot Windows 7 Administrator Password

The methods above don't work at all. Eventually I used a paid tool - PCUnlocker Live CD, and it successfully bypassed my lost admin password.

How to switch off internal macbook screen when using external monitor(s)

as far as i observed, adding external displays ( running different screens on them, not mirroring) to a macbook pro increases the gpu workload and with that comes temperature rise in the laptop and increase in ventilator noise - and probably increased hardware aging and risk of component faillure due to high temperature inside the laptop.
simply try connecting two external 27" screens and open some flash video on both of them. then run a temperature monitoring software and watch temps rise, compared to running same flash videos / demanding tasks only on one connected external screen or only on the laptop screen with no external monitor connected.
especially in mavericks, due to its increased background routines, such a set-up appears ever the more taxing, then again who does not love apple`s nice adds showing laptops with two 27” screens connected to it and the workspace vision they invoke....
i have seen temps around 100° to 102° celsius on a 13" macbook pro 2012 edition, which i would expect is territory where the cpu / gpu temp safety switches will trigger system shutdown any time soon ( hardware status before verified as fully in order by apple service and default osx installation)
imagine your anti-virus software starting some realtime content screening while runnign some demanding tasks already and the system shuts down easily (all such situation observed in reality)
(would be interesting to see how a retina display macbook fares with 2 external monitors running demanding tasks, considering the retina display already increased taxing for the gpu - any experience from users of such a setup would be very much appreciated as it will provide critical purchase decision intelligence for all of us envisioning a retina-book and two big screens adoring our desks...)
turning down the macbook`s built-in screen`s backlight may reduce power consumption but i have not seen any evidence that it switches off the gpu-to-screen feed and respective gpu load - it certainly did not prevent gpu, cpu, board, etc temps to rise to borderline levels.
so the key question here is, how to switch off the macbook pro`s built-in screen in order to avoid gpu cycles being wasted on that screen ( and the resulting heat developments) when working with big external screen(s) connected to the laptop ?

this thread talks about running several monitors as advertised by apple and running demanding task on them.
with the lid open, the keyboard offers a very efficiant heat escape vector, which is blocked when the lid is closed - this is a basic and commonsense insulation effect. this thread also mentions the use of temperature monitoring software and thus a repeatable test setup. the temps recorded were also mentioned. they rose when the lid was closed, the running task remaining unchanged. as far as i could track down the cpus in discussion will shut down around the 105 degree celsius range. i observed system shut downs when the system approached 103° celsius. not to mention that the fans will run loud well before that.
again this is on hardware checked and ok-ed by apple service.
the question still welcoming an expert answer: is there any way to switch off the built-in macbook monitor while the lid is open ?

HT204291 How does one get full screen when using air play on my tv from my iPad,thanks in advance

How does one get a full screen when using air play on my tv when I'm mirroring,.? Thanks in advance

The iPad's display is 4:3, so it cannot fill your TV screen, which is 16:9
The only way is to change your TV settings and stretch the image.

How do I stop the login process when I open iTunes?

How do I stop the login process when I open iTunes? It often request I login sometimes twice.

I amhaving the same issue of having to log into my apple account wheever I open I-Tunes. In my iTunes sharing my password requirment is unchecked and in filevault it is unchecked also. I have just upgraded to the newest version of iTunes and I still get the pop-up window asking me to login.
Any other thoughts?
thank you

How to blank laptop screen when using external monitor/

Hi there
I need some help with figuring out how to configure my xorg.conf for my Arch Linux 64 bit installation on a HP Pavilion dv 5000 laptop so that I can automatically blank my laptop screen when using an external monitor. I have Arch Linux installed along with Ubuntu Feisty. In Ubuntu my external monitor (Viewsonic 1912WB) was not detected at the time of installation but with the native 1280X800 resolution that is good for the laptop takes effect for the external monitor automatically when the external monitor is plugged in. The laptop monitor goes blank when the external monitor is plugged in.
In my Arch Linux installation I have not been able to configure a dual head configuration using the ATI Radeon drivers (fglrx). I have the native 1280X800 resolution set up for the laptop monitor and this resolution takes effect for the external monitor also. However the laptop monitor also continues to function when the external monitor is plugged in. I would like to blank the laptop monitor when using the external monitor.
I am attaching my Arch Linux xorg.conf and the Ubuntu xorg.conf below. Thanks for anyone who can help, I am having a lot of difficulty in figuring out how to set up xorg.conf among all the things that I have had to learn so far in Linux and I am a relative newcomer to the whole thing. I have tried to compare the two xorg.conf files and edit my Arch xorg.conf in accordance with the Ubuntu one but it did not work and I keep getting errors!
I am using XFCE as my Desktop environment.
Arch Linux xorg.conf
# File generated by xorgconfig.
# Copyright 2004 The X.Org Foundation
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
# Refer to the xorg.conf(5) man page for details about the format of
# this file.
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# Files section. This allows default font and rgb paths to be set
# Server flags section.
# Input devices
# Core keyboard's InputDevice section
# Core Pointer's InputDevice section
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Monitor section
# Any number of monitor sections may be present
# Graphics device section
# Any number of graphics device sections may be present
# Standard VGA Device:
# Device configured by xorgconfig:
# Screen sections
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
# ServerLayout sections.
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
# Section "DRI"
# Mode 0666
# EndSection
Section "ServerLayout"
# The Identifier line must be present
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
Identifier "Simple Layout"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# RgbPath "/usr/share/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
# FontPath "/usr/share/fonts/TTF"
# FontPath "/usr/share/fonts/Type1"
# FontPath "/usr/lib/X11/fonts/local/"
# FontPath "/usr/lib/X11/fonts/misc/"
# FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/Speedo/"
# FontPath "/usr/lib/X11/fonts/Type1/"
# FontPath "/usr/lib/X11/fonts/TrueType/"
# FontPath "/usr/lib/X11/fonts/freefont/"
# FontPath "/usr/lib/X11/fonts/75dpi/"
# FontPath "/usr/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/lib/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
EndSection
Section "Module"
# This loads the DBE extension module.
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
# This loads the font modules
# Load "type1"
# This loads the GLX module
# Load "glx"
# This loads the DRI module
# Load "dri"
Load "dbe" # Double buffer extension
SubSection "extmod"
Option    "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
Load "freetype"
# Load "xtt"
EndSection
Section "InputDevice"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Identifier "Keyboard1"
Driver "kbd"
Option    "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
Option    "XkbRules" "xorg"
Option    "XkbModel" "pc104"
Option    "XkbLayout" "us"
EndSection
Section "InputDevice"
# Identifier and driver
# the following line.
# Option "Protocol" "Xqueue"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7. Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
Identifier "Mouse1"
Driver "mouse"
Option    "Protocol" "Auto" # Auto detect
Option    "Device" "/dev/input/mice"
# When using XQUEUE, comment out the above two lines, and uncomment
Option    "ZAxisMapping" "4 5 6 7"
# Emulate3Buttons is an option for 2-button mice
EndSection
Section "Monitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
Identifier "My Monitor"
HorizSync 30.0 - 62.0
VertRefresh 50.0 - 70.0
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option    "VendorName" "ATI Proprietary Driver"
Option    "ModelName" "Generic Autodetecting Monitor"
Option    "DPMS" "true"
EndSection
Section "Device"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
Identifier "Standard VGA"
Driver "vga"
VendorName "Unknown"
BoardName "Unknown"
EndSection
Section "Device"
#VideoRam 131072
# Insert Clocks lines here if appropriate
Identifier "* Generic VESA compatible"
Driver "vesa"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
EndSection
Section "Screen"
Identifier "Screen 1"
Device "* Generic VESA compatible"
Monitor "My Monitor"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1280x800" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1280x800" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x800" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Ubuntu xorg.conf
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "ATI Technologies Inc ATI Radeon XPRESS 200M 5955 (PCIE)"
Driver "ati"
BusID "PCI:1:5:0"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies Inc ATI Radeon XPRESS 200M 5955 (PCIE)"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x800"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
InputDevice "Synaptics Touchpad"
EndSection
Section "DRI"
Mode 0666
EndSection

Xrandr 1.2 provides means for this. But today the only supported configuration is xorg-server-1.3 + xf86-video-intel-2.0. So for Radeon you'll have to wait for drivers that support Randr 1.2.
On my laptop (Thinkpad x60s) that would be:
xrandr --output VGA --auto
xrandr --output LVDS --off

Why does my login screen when scrolling mouse over appear pixalated (has small squares wherver the mouse scrolls until the entire page has been scratched like a lotto ticket:) ?

Why does my login screen when scrolling mouse over appear pixalated (has small squares wherver the mouse scrolls until the entire page has been scratched like a lotto ticket:) ?

OS X Lion: Login window partially appears, cursor movement redraws screen

IOS6... How do I see the full screen when watching youtube videos and second the map quality is very poor, foggy most of the time and images overlap to each other... Can I restore to IOS6 if these problems can not be solved?

I just upgraded to IOS6 and I have some difficulties that I never had on IOS5:
How can a see the full screen when watching youtube. Address bar is always in view.
Maps are foggy and some images overlap to eachother.
If these problems can not be solved, how do I downgrade back to IOS5?
Regards,
Luis

Luis757 wrote:
If these problems can not be solved, how do I downgrade back to IOS5?
Regards,
Luis
No, there is no legitimate way to downgrade iOS to an earlier version.
Be patient, Apple will eventually get around to fixing the "bugs" in iOS 6.
You can leave feedback here: Apple Feedback.

How can I turn off computer screen, when mirroring to apple tv?

How can I turn off computer screen, when mirroring to apple tv?
Thanks.

Welcome to the Apple Community.
You can't. Mirroring is just what it says, it mirrors exactly what is on your computer screen, if there is nothing on your computer screen, that's what you will see on your TV screen.

How to swf auto fit to screen when start

how to swf auto fit to screen when start without any menu bar or window screen, i had use adobe flash player convert swf to ex, will fit to screen works in exe format?

Dear Josephine,
There is no option the way you want of autofit. Rather while opening the CSV in excel u can do the required formatting.
Regards,
Deva.

Priemier Elements 12 pops up a error screen when opening project." No disc in drive E.Please insert

Priemier Elements 12 pops up a error screen when opening project." No disc in drive E.Please insert disc to continue." My DVD drives are F and D. What do I have to do to get rid of this error?

charkmapman
What computer operating system is your Premiere Elements 12 running on?
In versions of Premiere Elements earlier than 12, the answer for that type of "No disc" message was usually related to SmartSound/Sonicfire Pro 5 feature. But, there is no SmartSound/SonicfirePro 5 feature in version 12, only Music Scores without the SmartSound name.
Consequently, I would suggest an uninstall, do a ccleaner run through (regular cleaner and registry cleaner parts), reinstall.
http://www.piriform.com/ccleaner
We will be watching for the results.
Thanks.
ATR

My PC doesn't see my iPad via iTunes, and I'm getting a message "iPad is disabled / connect to iTunes". How do I get a login screen on the iPad?

My PC doesn't see my iPad via iTunes, and I'm getting a message "iPad is disabled / connect to iTunes". How do I get a login screen on the iPad?

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. If you did not do step 4 properly, start all over again.

Problem establishing login screen when ethernet plugged into NetComm NB5Plu

Problem establishing login screen when ethernet plugged into NetComm NB5Plus4
I get a flashing folder that does not allow the login page to appear.
If I remove the ethernet connection then boot-up the system establishes the login page and I can plug the ethernet back in and the system logins in.
Where should I look to identify the problem, I am thinking it is the OS X install.
Regards
Si

Hi hoydj,
It might be a driver problem. Check out this FAQ from Wacom's Knowledge Base:
http://www.wacom.com/faqs/knowledge_search.cfm?id=335

Using just the TV screen when using HDMI port?

Hi,
I have the Macbook Pro with retina display and I was wondering how I could use just the TV screen when using HDMI port. I don't want mirroring displays, just one on the TV.

With the TV connected and the MBP plugged into the mains (i.e. not running on battery power) close the lid. The MBP will go to sleep, wake it up with an external keyboard or mouse - which must be connected in advance, or paired in advance if a bluetooth keyboard/mouse.

The settings box is always in the middle of my screen when using Flash Player , Won't close?

The settings box is always in the middle of my screen when using Flash Player , Won't close ?

See:How do I do a clean install of Flash Player?
It should work ok after that.

How to pop up a login screen when using menu?

Similar Messages

Maybe you are looking for