How to populate data into Dynamic Internal Table.

Hi Experts,
I had created one Dynamic Internal table and one static internal table.I want to move data from Static Internal table to Dynamic interal table.And aslo the number of coloum of these two tables are not same.
So please help me for solving this issue.
Thanks,
Seema.

Hi,
Check out this sample program for dynamictable report.
REPORT YMS_DYNAMICDEMO
 NO STANDARD PAGE HEADING
 MESSAGE-ID zcs_c2c_001.
type-pools : abap.
field-symbols: <dyn_table> type standard table,
 <dyn_wa>,
 <dyn_field>.
data: dy_table type ref to data,
 dy_line type ref to data,
 xfc type lvc_s_fcat,
 ifc type lvc_t_fcat.
selection-screen begin of block b1 with frame.
parameters: p_table(30) type c default 'T001'.
selection-screen end of block b1.
start-of-selection.
perform get_structure.
perform create_dynamic_itab.
perform get_data.
perform write_out.
form get_structure.
data : idetails type abap_compdescr_tab,
 xdetails type abap_compdescr.
data : ref_table_des type ref to cl_abap_structdescr.
Get the structure of the table.
ref_table_des ?=
 cl_abap_typedescr=>describe_by_name( p_table ).
idetails[] = ref_table_des->components[].
loop at idetails into xdetails.
 clear xfc.
 xfc-fieldname = xdetails-name .
 xfc-datatype = xdetails-type_kind.
 xfc-intlen = xdetails-length.
 xfc-decimals = xdetails-decimals.
 append xfc to ifc.
endloop.
endform.
form create_dynamic_itab.
Create dynamic internal table and assign to FS
call method cl_alv_table_create=>create_dynamic_table
 exporting
 it_fieldcatalog = ifc
 importing
 ep_table = dy_table.
assign dy_table->* to <dyn_table>.
Create dynamic work area and assign to FS
create data dy_line like line of <dyn_table>.
assign dy_line->* to <dyn_wa>.
endform.
form get_data.
Select Data from table.
select * into table <dyn_table>
 from (p_table).
endform.
form write_out.
Write out data from table.
loop at <dyn_table> into <dyn_wa>.
 do.
 assign component sy-index
 of structure <dyn_wa> to <dyn_field>.
 if sy-subrc <> 0.
 exit.
 endif.
 if sy-index = 1.
 write:/ <dyn_field>.
 else.
 write: <dyn_field>.
 endif.
 enddo.
endloop.
endform.
Thanks,
Shankar

Similar Messages

How to populate data in dynamic internal table

Hi Expert,
fyi. My dynamic internal table field is created base on data selected. Eg. select table qpcd has 5 records. These 5 recods will become fieldname to my dynamic internal table. My dynamic internal table will be
...itab
 01
 02
 03
 04
 05
The 5 records from qpcd is populated in another table call viqmel. I need to find the occurance of each code in viqmel and populate the number of occurance in itab in each of column. The final dynamic itab will be like this
table itab
01 02 03 04 05 -
> field name
2 0 1 0 1 -
> data
my source code like below
Report ZPLYGRND2.
TABLES: mara, makt.
TYPE-POOLS: slis, sydes.
DATA:it_fcat TYPE slis_t_fieldcat_alv,
 is_fcat LIKE LINE OF it_fcat,
 ls_layout TYPE slis_layout_alv.
DATA: it_fieldcat TYPE lvc_t_fcat,
 is_fieldcat LIKE LINE OF it_fieldcat.
DATA: new_table TYPE REF TO data,
 new_line TYPE REF TO data,
 ob_cont_alv TYPE REF TO cl_gui_custom_container,
 ob_alv TYPE REF TO cl_gui_alv_grid,
 vg_campos(255) TYPE c,
 i_campos LIKE TABLE OF vg_campos,
 vg_campo(30) TYPE c,
 vg_tables(60) TYPE c.
types : begin of t_qpcd,
 codegruppe like qpcd-codegruppe,
 code like qpcd-code,
 end of t_qpcd.
data:wa_qpcd type t_qpcd,
 i_qpcd type standard table of t_qpcd initial size 0.
FIELD-SYMBOLS: <l_table> TYPE table,
 <l_line> TYPE ANY,
 <l_field> TYPE ANY.
select * into corresponding fields of wa_qpcd from qpcd
where katalogart = 'D'
and codegruppe = 'OOT01'.
append wa_qpcd to i_qpcd.
endselect.
loop at i_qpcd into wa_qpcd.
is_fcat-fieldname = wa_qpcd-code.
APPEND is_fcat TO it_fcat.
endloop.
LOOP AT it_fcat INTO is_fcat.
 is_fieldcat-fieldname = is_fcat-fieldname.
 is_fieldcat-ref_field = is_fcat-ref_fieldname.
 is_fieldcat-ref_table = is_fcat-ref_tabname.
 APPEND is_fieldcat TO it_fieldcat.
ENDLOOP.
*... Create the dynamic internal table
CALL METHOD cl_alv_table_create=>create_dynamic_table
 EXPORTING
 it_fieldcatalog = it_fieldcat
 IMPORTING
 ep_table = new_table.
if sy-subrc = 0.
endif.
*... Create a new line
ASSIGN new_table->* TO <l_table>.
CREATE DATA new_line LIKE LINE OF <l_table>.
ASSIGN new_line->* TO <l_line>.
LOOP AT <l_table> INTO <l_line>.
ENDLOOP.

hello dear i m giving u a code in this a dynamic table is made on the basis of table in database , and u can download this data correct it , see it, or even change it....and upload in tht table help full if u dont know the table name...in advance.
also the code to populate data in dynamic table is in this code like:
SELECT * FROM (MTABLE_N)
INTO CORRESPONDING FIELDS OF TABLE <FS_ITAB> .
look at the whole program .hope this solve ur problem thanks.
REPORT ZTESTA MESSAGE-ID ZIMM .
TYPES : DATA_OBJECT TYPE REF TO DATA.
DATA : MITAB TYPE REF TO DATA .
TYPE-POOLS : SLIS .
DATA : IT_FIELDCAT TYPE STANDARD TABLE OF SLIS_FIELDCAT_ALV
WITH HEADER LINE .
DATA : IT_FIELDCATALOG TYPE LVC_T_FCAT .
DATA : WA_FIELDCATALOG TYPE LVC_S_FCAT .
DATA : I_STRUCTURE_NAME LIKE DD02L-TABNAME .
DATA : I_CALLBACK_PROGRAM LIKE SY-REPID .
DATA : DYN_LINE TYPE DATA_OBJECT .
FIELD-SYMBOLS : <FS_ITAB> TYPE STANDARD TABLE .
DATA : TABLE_NAME_IS_VALID TYPE C .
DATA : DYNAMIC_IT_INSTANTIATED TYPE C .
CONSTANTS BUTTONSELECTED TYPE C VALUE 'X' .
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(29) T_TABL.
PARAMETERS : MTABLE_N LIKE RSRD1-TBMA_VAL
MATCHCODE OBJECT DD_DBTB_16 OBLIGATORY .
DATA CHECKTABLED.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(29) T_FILE.
PARAMETERS : MFILENAM LIKE RLGRAP-FILENAME .
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(29) T_DOWN.
PARAMETERS : P_DOWNLD RADIOBUTTON GROUP GRP1
USER-COMMAND M_UCOMM .
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(29) T_CHKF.
PARAMETERS : P_CHKFIL RADIOBUTTON GROUP GRP1 .
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(29) T_UPLD.
PARAMETERS : P_UPLOAD RADIOBUTTON GROUP GRP1 .
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(29) T_SHOW.
PARAMETERS : P_SHOW_T RADIOBUTTON GROUP GRP1 .
SELECTION-SCREEN END OF LINE.
AT SELECTION-SCREEN OUTPUT .
PERFORM CHECK_FILENAME .
AT SELECTION-SCREEN.
IF SY-UCOMM = 'ONLI'.
 CHECKTABLED = MTABLE_N+0(1).
 IF CHECKTABLED NE 'Z'.
 MESSAGE I017.
 LEAVE TO SCREEN 1000.
 ENDIF.
 IF SY-UNAME NE 'KAMESH.K'.
 MESSAGE I023 WITH SY-UNAME.
 LEAVE TO SCREEN 1000.
 ENDIF.
ENDIF.
IF SY-UCOMM = 'PRIN'.
 CHECKTABLED = MTABLE_N+0(1).
 IF CHECKTABLED NE 'Z'.
 MESSAGE I017.
 LEAVE TO SCREEN 1000.
 ENDIF.
 IF SY-UNAME NE 'KAMESH.K'.
 MESSAGE I023 WITH SY-UNAME.
 LEAVE TO SCREEN 1000.
 ENDIF.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR MFILENAM .
PERFORM F4_FOR_FILENAME .
INITIALIZATION .
T_TABL = 'Table Name' .
T_FILE = 'File Name' .
T_DOWN = 'Download Table' .
T_CHKF = 'Check File to Upload' .
T_UPLD = 'Upload File' .
T_SHOW = 'Show Table Contents' .
START-OF-SELECTION .
PERFORM CHECK_TABLE_NAME_IS_VALID .
END-OF-SELECTION .
IF TABLE_NAME_IS_VALID EQ ' ' .
 MESSAGE I398(00) WITH 'INVALID TABLE NAME' .
ELSE .
 PERFORM INSTANTIATE_DYNAMIC_INTERNAL_T .
 CHECK DYNAMIC_IT_INSTANTIATED = 'X' .
 CASE BUTTONSELECTED .
 WHEN P_DOWNLD .
 PERFORM SELECT_AND_DOWNLOAD .
 WHEN P_CHKFIL .
 PERFORM CHECK_FILE_TO_UPLOAD .
 WHEN P_UPLOAD .
 PERFORM UPLOAD_FROM_FILE .
 WHEN P_SHOW_T .
 PERFORM SHOW_CONTENTS .
 ENDCASE .
ENDIF .
FORM CHECK_TABLE_NAME_IS_VALID.
DATA MCOUNT TYPE I .
TABLES DD02L .
CLEAR TABLE_NAME_IS_VALID .
SELECT COUNT(*) INTO MCOUNT FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'TABL'
AND OBJ_NAME = MTABLE_N .
IF MCOUNT EQ 1 .
 CLEAR DD02L .
 SELECT SINGLE * FROM DD02L WHERE TABNAME = MTABLE_N .
 IF SY-SUBRC EQ 0.
 IF DD02L-TABCLASS = 'TRANSP' .
 TABLE_NAME_IS_VALID = 'X' .
 ENDIF .
 ENDIF.
ENDIF .
ENDFORM. " CHECK_TABLE_NAME_IS_VALID
FORM SELECT_AND_DOWNLOAD.
CLEAR : <FS_ITAB> .
SELECT * FROM (MTABLE_N)
INTO CORRESPONDING FIELDS OF TABLE <FS_ITAB> .
PERFORM CHECK_FILENAME.
CALL FUNCTION 'WS_DOWNLOAD'
 EXPORTING
 FILENAME = MFILENAM
 FILETYPE = 'DAT'
 TABLES
 DATA_TAB = <FS_ITAB>
 EXCEPTIONS
 FILE_OPEN_ERROR = 1
 FILE_WRITE_ERROR = 2
 INVALID_FILESIZE = 3
 INVALID_TYPE = 4
 NO_BATCH = 5
 UNKNOWN_ERROR = 6
 INVALID_TABLE_WIDTH = 7
 GUI_REFUSE_FILETRANSFER = 8
 CUSTOMER_ERROR = 9
 OTHERS = 10.
IF SY-SUBRC EQ 0.
 MESSAGE I398(00) WITH 'Table' MTABLE_N
 'successfully downloaded to '
 MFILENAM .
ENDIF.
ENDFORM. " SELECT_AND_DOWNLOAD
FORM UPLOAD_FROM_FILE.
DATA : ANS TYPE C .
DATA : LINES_OF_ITAB TYPE I .
DATA : MSY_SUBRC TYPE I .
CALL FUNCTION 'POPUP_TO_CONFIRM_STEP'
 EXPORTING
 TEXTLINE1 = 'Are you sure you wish to upload'
 TEXTLINE2 = 'data from ASCII File to DB table '
 TITEL = 'Confirmation of Data Upload'
 IMPORTING
 ANSWER = ANS.
IF ANS = 'J' .
 PERFORM CHECK_FILENAME.
 CLEAR MSY_SUBRC .
 CALL FUNCTION 'WS_UPLOAD'
 EXPORTING
 FILENAME = MFILENAM
 FILETYPE = 'DAT'
 TABLES
 DATA_TAB = <FS_ITAB>
 EXCEPTIONS
 CONVERSION_ERROR = 1
 FILE_OPEN_ERROR = 2
 FILE_READ_ERROR = 3
 INVALID_TYPE = 4
 NO_BATCH = 5
 UNKNOWN_ERROR = 6
 INVALID_TABLE_WIDTH = 7
 GUI_REFUSE_FILETRANSFER = 8
 CUSTOMER_ERROR = 9
 OTHERS = 10.
 MSY_SUBRC = MSY_SUBRC + SY-SUBRC .
 IF SY-SUBRC EQ 0.
 DESCRIBE TABLE <FS_ITAB> LINES LINES_OF_ITAB .
 IF LINES_OF_ITAB GT 0 .
 MODIFY (MTABLE_N) FROM TABLE <FS_ITAB> .
 MSY_SUBRC = MSY_SUBRC + SY-SUBRC .
 ENDIF .
 ENDIF.
 IF MSY_SUBRC EQ 0 .
 MESSAGE I398(00) WITH LINES_OF_ITAB
 'Record(s) inserted in table'
 MTABLE_N .
 ELSE .
 MESSAGE I398(00) WITH
 'Errors occurred No Records inserted in table'
 MTABLE_N .
 ENDIF .
ENDIF .
ENDFORM. " UPLOAD_FROM_FILE
FORM F4_FOR_FILENAME.
CALL FUNCTION 'WS_FILENAME_GET'
 EXPORTING
 DEF_PATH = 'C:\'
 MASK = ',.,..'
 MODE = '0'
 IMPORTING
 FILENAME = MFILENAM
 EXCEPTIONS
 INV_WINSYS = 1
 NO_BATCH = 2
 SELECTION_CANCEL = 3
 SELECTION_ERROR = 4
 OTHERS = 5.
ENDFORM. " F4_FOR_FILENAME
FORM CHECK_FILENAME.
IF MFILENAM IS INITIAL
AND NOT ( MTABLE_N IS INITIAL )
AND P_SHOW_T NE BUTTONSELECTED.
 CONCATENATE 'C:\'
 MTABLE_N '.TXT' INTO MFILENAM.
ENDIF .
ENDFORM. " CHECK_FILENAME
FORM INSTANTIATE_DYNAMIC_INTERNAL_T.
CLEAR DYNAMIC_IT_INSTANTIATED .
I_STRUCTURE_NAME = MTABLE_N .
CLEAR IT_FIELDCAT[] .
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
 EXPORTING
 I_STRUCTURE_NAME = I_STRUCTURE_NAME
 CHANGING
 CT_FIELDCAT = IT_FIELDCAT[]
 EXCEPTIONS
 INCONSISTENT_INTERFACE = 1
 PROGRAM_ERROR = 2
 OTHERS = 3.
IF SY-SUBRC EQ 0.
 LOOP AT IT_FIELDCAT .
 CLEAR WA_FIELDCATALOG .
 MOVE-CORRESPONDING IT_FIELDCAT TO WA_FIELDCATALOG .
 WA_FIELDCATALOG-REF_FIELD = IT_FIELDCAT-FIELDNAME .
 WA_FIELDCATALOG-REF_TABLE = MTABLE_N .
 APPEND WA_FIELDCATALOG TO IT_FIELDCATALOG .
 ENDLOOP .
 CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
 EXPORTING
 IT_FIELDCATALOG = IT_FIELDCATALOG
 IMPORTING
 EP_TABLE = MITAB .
 ASSIGN MITAB->* TO <FS_ITAB> .
 DYNAMIC_IT_INSTANTIATED = 'X' .
ENDIF.
ENDFORM. " INSTANTIATE_DYNAMIC_INTERNAL_T
FORM SHOW_CONTENTS.
CLEAR : <FS_ITAB> .
SELECT * FROM (MTABLE_N)
INTO CORRESPONDING FIELDS OF TABLE <FS_ITAB> .
I_CALLBACK_PROGRAM = SY-REPID .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
 EXPORTING
 I_CALLBACK_PROGRAM = I_CALLBACK_PROGRAM
 IT_FIELDCAT = IT_FIELDCAT[]
 TABLES
 T_OUTTAB = <FS_ITAB>
 EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2.
ENDFORM. " SHOW_CONTENTS
FORM CHECK_FILE_TO_UPLOAD.
PERFORM CHECK_FILENAME.
CALL FUNCTION 'WS_UPLOAD'
 EXPORTING
 FILENAME = MFILENAM
 FILETYPE = 'DAT'
 TABLES
 DATA_TAB = <FS_ITAB>
 EXCEPTIONS
 CONVERSION_ERROR = 1
 FILE_OPEN_ERROR = 2
 FILE_READ_ERROR = 3
 INVALID_TYPE = 4
 NO_BATCH = 5
 UNKNOWN_ERROR = 6
 INVALID_TABLE_WIDTH = 7
 GUI_REFUSE_FILETRANSFER = 8
 CUSTOMER_ERROR = 9
 OTHERS = 10.
IF SY-SUBRC EQ 0.
 I_CALLBACK_PROGRAM = SY-REPID .
 CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
 EXPORTING
 I_CALLBACK_PROGRAM = I_CALLBACK_PROGRAM
 IT_FIELDCAT = IT_FIELDCAT[]
 TABLES
 T_OUTTAB = <FS_ITAB>
 EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2.
ENDIF .
ENDFORM. " CHECK_FILE_TO_UPLOAD
Message was edited by:
 SAURABH SINGH
 SENIOR EXECUTIVE
 SAMSUNG INDIA ELECTRONICS LTD.,NOIDA

How to upload data with dynamic internal table

Hi,
I have to upload the basic , sales, purchasing view data by using bapi depend on check box selected for views.
i have filled fieldcatalog for selected views and pass the field catalog structure to dynamic int table and
import it into the field symbol <fs_data>. this field symbol assigned to <fs_1>.
then callED the 'GUI_UPLOAD ' and when i pass field symbo for function module i am getting first 10 rows 0f the file .
flat file has basic data,sales ,purchase fields data
ex: i was selected basicview and purchase view and execute i am getting basic,sales view data.
how can i get only basic and purchase data.

hi ,
please find code.
CALL METHOD cl_alv_table_create=>create_dynamic_table
 EXPORTING
 it_fieldcatalog = lt_fieldcatalog
 IMPORTING
 ep_table = <fs_data>
 EXCEPTIONS
 generate_subpool_dir_full = 1
 OTHERS = 2.
IF sy-subrc <> 0. "#EC NEEDED
ENDIF.
So <FS_1> now points to our dynamic internal table.
ASSIGN <fs_data>->* TO <fs_1>.
Next step is to create a work area for our dynamic internal table.
CREATE DATA new_line LIKE LINE OF <fs_1>.
A field-symbol to access that work area
ASSIGN new_line->* TO <fs_2>.
ASSIGN new_line->* TO <fs_3>.
CALL FUNCTION 'GUI_UPLOAD'
 EXPORTING
 filename = p_f
 filetype = 'DAT'
 TABLES
 data_tab = <fs_1>
 EXCEPTIONS
 file_open_error = 1
 file_read_error = 2
 no_batch = 3
 gui_refuse_filetransfer = 4
 invalid_type = 5
 no_authority = 6
 unknown_error = 7
 bad_data_format = 8
 header_not_allowed = 9
 separator_not_allowed = 10
 header_too_long = 11
 unknown_dp_error = 12
 access_denied = 13
 dp_out_of_memory = 14
 disk_full = 15
 dp_timeout = 16
 OTHERS = 17.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.

Populate data from dynamic internal table

Hi
I have dynamic internal table <lt_paxxxx>. Iam fillling <lt_paxxxx> in the following way.
select * into table <lt_paxxxx> from (infty-dbname).
I have to pass data of <lt_paxxxx> to another internal table lt_final.
'lt_final' should contain fields like <lt_paxxxx>, infty name, DB name.
Could you please help me out how to pass <lt_paxxxx> data to 'LT_FINAL'.

loop at <it_table>
 into <is_table>.
 loop at it_fieldcatalog
 into is_fieldcatalog.
 assign component is_fieldcatalog-fieldname
 of structure <is_table>
 to <field1>.
 concatenate 'IT_TABLE-'
 is_fieldcatalog-fieldname
 into w_field.
 assign (w_field) to <field2>.
 check sy-subrc eq space.
 move <field1> to <field2>.
 endloop.
 append it_table
endloop.
regards

Popualting data into dynamic internal table

Hi all,
 I am working on Dynamic internal tables.I have created the structure of internal table but i am unable to populate data into it.Though i have seen some of the forums but those didn't help me. please provide me the solution. Here is my code what i did.I have the data in itab and itab1.
My requirement is meinh fileds are dynamic.thie meinh and umren are two fileds in mvke table.for one record ihave to populate umren value for that particular meinh value.Pls help me.
mtart vkorg werks mtanr Meinh(kg) Meinh(gl)
fert 0353 0303 3231 Umren value Umren value
REPORT z123.
 T Y P E - P O O L S
TYPE-POOLS :slis,abap.
 T A B L E S
*Tables
TABLES: mara,marm,mvke,marc.
 F I E L D - S Y M B O L S
FIELD-SYMBOLS: <dyn_table> TYPE STANDARD TABLE,
 <dyn_wa> ,
 <dyn_field>.
 I N T E R N A L T A B L E S
Internal Tables declaration for ALV GRID/LIST
DATA: ls_fieldcat TYPE slis_fieldcat_alv, "FIELD CATALOG LIST
 tb_uom_cat TYPE slis_t_fieldcat_alv, "FIELD CATALOG
 ls_fieldcat1 TYPE lvc_s_fcat,
 tb_dy_cat TYPE lvc_t_fcat, "FIELD CATALOG
 tb_outputcat TYPE slis_t_fieldcat_alv,
 tb_events TYPE slis_t_event,
 ref_grid TYPE REF TO cl_gui_alv_grid,
 t_events LIKE LINE OF tb_events.
DATA: BEGIN OF itab OCCURS 0,
 mtart LIKE mara-mtart,
 vkorg LIKE mvke-vkorg,
 werks LIKE marc-werks,
 matnr TYPE mara-matnr,
 END OF itab.
DATA: BEGIN OF itab1 OCCURS 0,
 matnr TYPE marm-matnr,
 umren TYPE marm-umren,
 meinh TYPE marm-meinh,
 END OF itab1.
 V A R I A B L E S
Global Variables
DATA: g_repid LIKE sy-repid. "Report ID
DATA: dy_table TYPE REF TO data,
 dy_line TYPE REF TO data.
 S E L E C T I O N S C R E E N
For User Input(Selection Criteria)
SELECTION-SCREEN BEGIN OF BLOCK b0 WITH FRAME TITLE text-001.
SELECT-OPTIONS :
s_mtart FOR mara-mtart OBLIGATORY, " Material type
s_vkorg FOR mvke-vkorg OBLIGATORY, " Sales Organization
s_plant FOR marc-werks, " Plant
s_meinh FOR marm-meinh. " Unit of Measure
SELECTION-SCREEN END OF BLOCK b0.
 I N I T I A L I Z A T I O N
INITIALIZATION.
Program ID
g_repid = sy-repid. " Prog ID
 A T S E L E C T I O N - S C R E E N
AT SELECTION-SCREEN.
Validate Material Type
PERFORM check_mtart.
Validate Sales Organization
PERFORM check_vkorg.
Validate Plant
PERFORM check_werks.
Validate Unit of Measure (UOM)
PERFORM check_meinh.
 S T A R T - O F - S E L E C T I O N
START-OF-SELECTION.
Get Data
PERFORM get_data.
FIELD CATALOG FOR ALV
PERFORM fill_field_catalog_uom USING tb_uom_cat.
FIELD CATALOG FOR CREATING DYNAMIC INTERNAL TABLE
PERFORM fill_field_catalog_dy USING tb_dy_cat.
CREATING DYNAMIC INTERNAL TABLE
PERFORM dy_tab_create.
 End of selection *
 F O R M S
*& Form CHECK_MTART
 Validate Material Type
FORM check_mtart .
Material Type
DATA :l_mtart LIKE t134-mtart.
CHECK NOT s_mtart IS INITIAL.
SELECT mtart UP TO 1 ROWS
 INTO l_mtart
 FROM t134
 WHERE mtart IN s_mtart.
ENDSELECT.
IF sy-subrc <> 0.
 MESSAGE e899(mm) WITH 'Invalid Material Type'(002).
ENDIF.
ENDFORM. " CHECK_MTART
*& Form CHECK_VKORG
 Validate Sales Organization
FORM check_vkorg .
Sales Oraganization
DATA :l_vkorg LIKE tvko-vkorg.
CHECK NOT s_vkorg IS INITIAL.
SELECT vkorg UP TO 1 ROWS
 INTO l_vkorg
 FROM tvko
 WHERE vkorg IN s_vkorg.
ENDSELECT.
IF sy-subrc <> 0.
 MESSAGE e899(mm) WITH 'Invalid Sales Organization'(003).
ENDIF.
ENDFORM. " CHECK_VKORG
*& Form CHECK_WERKS
 Validate Plant
FORM check_werks .
Plant
DATA :l_werks LIKE t001w-werks.
CHECK NOT s_plant IS INITIAL.
SELECT werks UP TO 1 ROWS
 INTO l_werks
 FROM t001w
 WHERE werks IN s_plant.
ENDSELECT.
IF sy-subrc <> 0.
 MESSAGE e899(mm) WITH 'Invalid Plant'(004).
ENDIF.
ENDFORM. " CHECK_WERKS
*& Form CHECK_MEINH
 Validate Unit of Measure (UOM)
FORM check_meinh .
Unit of Measure (UOM)
DATA :l_meinh LIKE t006-msehi.
CHECK NOT s_meinh IS INITIAL.
SELECT msehi UP TO 1 ROWS
 INTO l_meinh
 FROM t006
 WHERE msehi IN s_meinh.
ENDSELECT.
IF sy-subrc <> 0.
 MESSAGE e899(mm) WITH 'Invalid Unit of Measure'(005).
ENDIF.
ENDFORM. " CHECK_MEINH
*& Form FILL_FIELD_CATALOG_UOM
 text
 FIELD CATALOG FOR ALV
FORM fill_field_catalog_uom USING l_fieldcat TYPE slis_t_fieldcat_alv.
DATA: BEGIN OF l_itab OCCURS 0,
 meinh TYPE marm-meinh,
 END OF l_itab.
DATA: l_count TYPE i.
DATA: l_fieldcat_col_pos TYPE i.
CLEAR ls_fieldcat.
ls_fieldcat-fieldname = 'MTART'.
ls_fieldcat-key = ''.
ls_fieldcat-col_pos = 1.
ls_fieldcat-ref_fieldname = 'MTART'.
ls_fieldcat-ref_tabname = 'MARA'.
APPEND ls_fieldcat TO l_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-fieldname = 'VKORG'.
ls_fieldcat-key = ''.
ls_fieldcat-col_pos = 2.
ls_fieldcat-ref_fieldname = 'VKORG'.
ls_fieldcat-ref_tabname = 'MVKE'.
APPEND ls_fieldcat TO l_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-fieldname = 'WERKS'.
ls_fieldcat-key = ''.
ls_fieldcat-col_pos = 3.
ls_fieldcat-ref_fieldname = 'WERKS'.
ls_fieldcat-ref_tabname = 'MARC'.
APPEND ls_fieldcat TO l_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-fieldname = 'MATNR'.
ls_fieldcat-key = 'x'.
ls_fieldcat-col_pos = 4.
ls_fieldcat-ref_fieldname = 'MATNR'.
ls_fieldcat-ref_tabname = 'MARA'.
APPEND ls_fieldcat TO l_fieldcat.
CLEAR ls_fieldcat.
l_fieldcat_col_pos = 5.
Getting the UOM as per user selection
SELECT msehi FROM t006
 INTO TABLE l_itab
 WHERE msehi IN s_meinh.
LOOP AT l_itab.
 ls_fieldcat-fieldname = l_itab-meinh.
 ls_fieldcat-key = ''.
 ls_fieldcat-col_pos = l_fieldcat_col_pos.
 ls_fieldcat-ref_fieldname = 'MSEHI'.
 ls_fieldcat-ref_tabname = 'T006'.
 APPEND ls_fieldcat TO l_fieldcat.
 CLEAR ls_fieldcat.
 l_fieldcat_col_pos = l_fieldcat_col_pos + 1.
ENDLOOP.
ENDFORM. " FILL_FIELD_CATALOG_UOM
*& Form DISPLAY_DATA
 text
--> p1 text
<-- p2 text
FORM display_data .
ENDFORM. " DISPLAY_DATAENDFORM. " FILL_FIELD_CATALOG_UOM
*& Form DY_TAB_CREATE
 text
--> p1 text
<-- p2 text
FORM dy_tab_create .
CREATE DYNAMIC INTERNAL TABLE AND ASSIGN TO FS
CALL METHOD cl_alv_table_create=>create_dynamic_table
 EXPORTING
 it_fieldcatalog = tb_dy_cat
 IMPORTING
 ep_table = dy_table.
ASSIGN dy_table->* TO <dyn_table>.
*CREATE DYNAMIC WORK AREA AND AASIGN TO FS
CREATE DATA dy_line LIKE LINE OF <dyn_table>.
ASSIGN dy_line->* TO <dyn_wa>.
ENDFORM. " DY_TAB_CREATE
*& Form FILL_FIELD_CATALOG_DY
 text
 FIELD CATALOG FOR CREATING A DYNAMIC TABLE
FORM fill_field_catalog_dy USING l_fieldcat TYPE lvc_t_fcat.
DATA: BEGIN OF l_itab OCCURS 0,
 meinh TYPE marm-meinh,
 END OF l_itab.
DATA: l_count TYPE i.
DATA: l_fieldcat_col_pos TYPE i.
DATA: l_umren TYPE string.
DATA: l_var TYPE string.
CLEAR ls_fieldcat.
ls_fieldcat1-fieldname = 'MTART'.
ls_fieldcat1-key = ''.
ls_fieldcat1-col_pos = 1.
ls_fieldcat1-datatype = 'char'.
ls_fieldcat1-intlen = 4.
APPEND ls_fieldcat1 TO l_fieldcat.
CLEAR ls_fieldcat1.
ls_fieldcat1-fieldname = 'VKORG'.
ls_fieldcat1-key = ''.
ls_fieldcat1-col_pos = 2.
ls_fieldcat1-datatype = 'char'.
ls_fieldcat1-intlen = 4.
APPEND ls_fieldcat1 TO l_fieldcat.
CLEAR ls_fieldcat1.
ls_fieldcat1-fieldname = 'WERKS'.
ls_fieldcat1-key = ''.
ls_fieldcat1-col_pos = 3.
ls_fieldcat1-datatype = 'char'.
ls_fieldcat1-intlen = 4.
APPEND ls_fieldcat1 TO l_fieldcat.
CLEAR ls_fieldcat1.
ls_fieldcat1-fieldname = 'MATNR'.
ls_fieldcat1-key = 'x'.
ls_fieldcat1-col_pos = 4.
ls_fieldcat1-datatype = 'char'.
ls_fieldcat1-intlen = 18.
APPEND ls_fieldcat1 TO l_fieldcat.
CLEAR ls_fieldcat1.
l_fieldcat_col_pos = 5.
Getting the UOM as per user selection
SELECT msehi FROM t006
 INTO TABLE l_itab
 WHERE msehi IN s_meinh.
SORT l_itab ASCENDING.
DESCRIBE TABLE l_itab LINES l_count.
LOOP AT l_itab.
 ls_fieldcat1-fieldname = l_itab-meinh.
 ls_fieldcat1-key = ''.
 ls_fieldcat1-col_pos = l_fieldcat_col_pos.
 ls_fieldcat1-datatype = 'dec'.
 ls_fieldcat1-intlen = 5.
 APPEND ls_fieldcat1 TO l_fieldcat.
 CLEAR ls_fieldcat1.
 l_fieldcat_col_pos = l_fieldcat_col_pos + 1.
ENDLOOP.
ENDFORM. " FILL_FIELD_CATALOG_DY
*& Form GET_DATA
 text
--> p1 text
<-- p2 text
FORM get_data .
SELECT
amtart bvkorg cwerks amatnr
INTO TABLE itab
FROM mara AS a
JOIN mvke AS b ON bmatnr = amatnr
JOIN marc AS c ON cmatnr = bmatnr
JOIN marm AS d ON dmatnr = cmatnr
WHERE a~mtart IN s_mtart
 AND b~vkorg IN s_vkorg
 AND c~werks IN s_plant.
SORT itab ASCENDING.
DELETE ADJACENT DUPLICATES FROM itab.
SELECT matnr umren meinh FROM marm
APPENDING TABLE itab1
FOR ALL ENTRIES IN itab
WHERE matnr = itab-matnr
AND meinh IN s_meinh .
ENDFORM. " GET_DATA

can you check this for creation of dynamic table
******DATA DECLARATION*****************************
FIELD-SYMBOLS : <it_final> TYPE STANDARD TABLE,
 <wa_final> TYPE ANY,
 <w_field> TYPE ANY.
***DYNAMIC CREATION OF FIELDCATALOG****************
*FIRST 2 FIELDS FIELDS FIELD1 AND FIELD2 ARE CONSTANT, FIELDS OBTAINED IN THE LOOP ENDLOOP ARE DYNAMIC,
*LIKEWISE DYNAMIC FIELDCATALOG IS CREATED
wa_fieldcatalog-fieldname = 'FIELD1'.
wa_fieldcatalog-ref_table = 'E070'.
wa_fieldcatalog-outputlen = '13'.
wa_fieldcatalog-reptext = 'Created On'.
wa_fieldcatalog-seltext = 'Created On'.
APPEND wa_fieldcatalog TO it_fieldcatalog.
CLEAR wa_fieldcatalog.
wa_fieldcatalog-fieldname = 'FIELD1'.
wa_fieldcatalog-ref_table = 'E070'.
wa_fieldcatalog-outputlen = '13'.
wa_fieldcatalog-reptext = 'Created On'.
wa_fieldcatalog-seltext = 'Created On'.
APPEND wa_fieldcatalog TO it_fieldcatalog.
CLEAR wa_fieldcatalog.
LOOP AT it_mandt WHERE mandt IN s_mandt.
 CONCATENATE 'CLNT' it_mandt INTO wa_fieldcatalog-fieldname.
 wa_fieldcatalog-inttype = 'NUMC'.
 wa_fieldcatalog-outputlen = '14'.
 wa_fieldcatalog-reptext = it_mandt.
 wa_fieldcatalog-seltext = it_mandt.
 APPEND wa_fieldcatalog TO it_fieldcatalog.
 CLEAR :wa_fieldcatalog ,it_mandt.
ENDLOOP.
********CREATE DYNAMIC TABLE************************
CALL METHOD cl_alv_table_create=>create_dynamic_table
 EXPORTING
 it_fieldcatalog = it_fieldcatalog
 IMPORTING
 ep_table = new_table
 EXCEPTIONS
 generate_subpool_dir_full = 1
 OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ASSIGN new_table->* TO <it_final>.
*********CREATE WORK AREA****************************
CREATE DATA new_line LIKE LINE OF <it_final>.
ASSIGN new_line->* TO <wa_final>.
*********INSERTTING WORK AREAR TO INTERNAL TABLE******
 INSERT <wa_final> INTO TABLE <it_final>.
*******POPULATING DATA*******************************
LOOP.
 ASSIGN COMPONENT 'FIELD1' OF STRUCTURE <wa_final> TO <w_field>.
 <w_field> = '12345'.
 ASSIGN COMPONENT 'FIELD2' OF STRUCTURE <wa_final> TO <w_field>.
 <w_field> = '21453DD'.
 FIELD1 AND FIELD2 ARE COMPONENTS OF FIELDCATALOG.
ENDLOOP.
ENDLOOP.

How to delete data from dynamic internal table

Hi,
I have dynamic internal table and I have some slection screen fields , using these selection screen fields
(select -options), I have to filter the data? assigning will work with READ , but I have select options not the parametre,
and also delete will not work for dynamic table..
as we cannot use assigning with delete..
So how to do this?
and one more thing is , I cannot filter the data while selection( in select, I cannot filter the data-> as it's not coming directly from table, it's coming from buffer),
so now after selection of data, I need to filter the data from dynamic table.
Is there any way to do this?
Regards,
Mrunal

Hi matt,
I tried with below code as you said. But I am getting dump. can you help?
here is my piece of code.
FIELD-SYMBOLS: <LS_DATA> type any,
 <LT_DATA> TYPE table,
 <L_FIELD> type any.
 ASSIGN <l_buffer_entry>-dataptr->* TO <LS_DATA>.
 ASSIGN <l_buffer_entry>-dataptr->* TO <LT_DATA>.
LOOP AT <LT_DATA> ASSIGNING <LS_DATA>.
ASSIGN COMPONENT 'BUKRS' OF STRUCTURE <LS_DATA> TO <L_FIELD>.
IF <L_FIELD> NOT IN SO_BUKRS.
DELETE <LT_DATA>.
ENDIF.
UNASSIGN <L_FIELD>.
ASSIGN COMPONENT 'BELNR' OF STRUCTURE <LS_DATA> TO <L_FIELD>.
IF <L_FIELD> NOT IN SO_BELNR.
DELETE <LT_DATA>.
ENDIF.
UNASSIGN <L_FIELD>.
ENDLOOP.
and here is the description of my dump:->>>
You attempted to access an unassigned field symbol
(data segment 32772).
This error may occur for any of the following reasons:
- You address a typed field symbol before it is set using ASSIGN
- You address a field symbol that points to a line in an internal table
that has been deleted
- You address a field symbol that had previously been reset using
UNASSIGN, or that pointed to a local field that no longer exists
- You address a global function interface parameter, even
though the relevant function module is not active,
that is it is not in the list of active calls. You can get the list
of active calls from the this short dump.

Populate data in dynamic internal table

Hi ppl,
I have a requirement where I need to display certain fields in the report output.
The output contains 8 fixed fields (common for all rows in output) and some dynamic fields (number of column varies with rows) which will be determined at runtime.
I am able to create the dunamic internal table....and at runtime I see the fields created in the internal table correctly.
Now my requirement is to fill this table with the data from 2 internal tables.
The values for the 8 common fields comes from the internal table t_output and the values for dynamic fields come from t_dynamic.
Please let me know the logic to merge these 2 internal tables into the dynamic internal table <dyn_table>.
Regards.

Hello David,
This has been discussed many times before in this forum. Since the table structure is dynamic the fields are determined at runtime.
To assign data to this table you have to use [ASSIGN COMPONENT ... |http://help.sap.com/abapdocu_70/en/ABAPASSIGN_MEM_AREA_DYNAMIC_DOBJ.htm#!ABAP_ALTERNATIVE_4@4@] variant.
Please refer to the example provided in the documentation for details.
BR,
Suhas

How to pass data from dynamic internal table to standard internal table

hi experts,
below is the piece of code which i have used in my requirement but the data is not moved.
LOOP AT <tab> ASSIGNING <tab1>.
MOVE-CORRESPONDING <tab1> TO wa.
append wa TO gt_outtab.
ENDLOOP.
here
<tab> - dynamic internal table.
<tab1>-dynamic internal table work area.
gt_outtab - standard internal table.
wa- standard internal table work area.
i am not getting what additional thing i have to write.
pls help me in this regard.
thankx in advance.
soham.p.

Hello soham p ,
I am also using the same logic but in my program it is working fine so you declare the fieldsymols like this and try and also check the dynamic internal contain the data or not.
FIELD-SYMBOLS : <y_i_table> TYPE STANDARD TABLE,
 <y_wa_table> TYPE ANY.
LOOP AT <y_i_table> ASSIGNING <y_wa_table>.
 MOVE-CORRESPONDING <y_wa_table> TO y_wa_vfscaid.
 APPEND y_wa_vfscaid TO y_i_vfscaid.
 CLEAR y_wa_vfscaid.
ENDLOOP.

Inserting data into dynamic internal tables

Hello everyone, i need some suggestions on the following problem:
I have created a dynamic table that consist of storage locations(SL) belonging to a plant. Each record in the internal table would need to display all the SL on the same line. I have succesfully created it and displayed it on an ALV, the problem now is how to insert data for the dynamically created storage locations:
EXAMPLE: Created dynamic itab
colA | colB | SL1 | SL2 | ... | SLn | colC | <--header
data | data | 100 | 120 | ... | 200 | data | <--record
I would like to insert data from the fields of another itab into SL1 to SLn. How can i go about doing it?
Data from ColA to ColC has been filled through:
loop at itab into w_itab.
move-corresponding w_itab to <dyn_tab>.
endloop.
I cannot do the same to the SLs as the fields is dynamically created during runtime and the fieldname is different from the data that i am to insert in into.
Any ideas?

Hi,
I have the following code in my BADI:
ct_value_list is defined in the parameters of the method as a type standard table.
Create values list reference
CREATE DATA lv_value_list_ref LIKE LINE OF ct_value_list.
ASSIGN lv_value_list_ref->* TO <lfs_value_list>.
IF CT_VALUE_LIST IS INITIAL.
 lv_tabix = sy-tabix.
 IF NOT LT_DATA[] IS INITIAL.
 LOOP AT lt_data assigning <lfs_data>.
 assign <lfs_data> to <lfs_value_list>.
 assign <lfs_value_list> to <lv_value_list>.
 ASSIGN COMPONENT lc_prvar OF STRUCTURE <lfs_value_list>
 TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
Get the material id
 READ TABLE it_matkey_tab ASSIGNING <lfs_matkey>
 WITH KEY matnr = <lfs_attribute>.
 IF sy-subrc = 0.
 lv_matid = <lfs_matkey>-matid.
 ENDIF.
 ENDIF.
 ASSIGN COMPONENT lc_mktgr OF STRUCTURE <lfs_value_list>
 TO <lfs_attribute>.
 IF <lfs_value_list> IS ASSIGNED.
 READ TABLE it_loc ASSIGNING <lfs_loc>
 WITH KEY locno = <lfs_attribute>.
 IF sy-subrc = 0.
 lv_locid = <lfs_loc>-locid.
 ENDIF.
 READ TABLE it_matloc ASSIGNING <lfs_matloc_int>
 WITH KEY matid = lv_matid
 locid = lv_locid.
 if sy-subrc = 0.
 MATLOC: Assignment of Values - START
 ASSIGN COMPONENT 'MATLOCID'
 OF STRUCTURE <lfs_matloc_int> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_matloc_int>-matlocid.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 INSERT <lfs_matloc_int> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'PLANNER_SNP'
 OF STRUCTURE <lfs_matloc_int> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_matloc_int>-planner_snp.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'AT101'
 OF STRUCTURE <lfs_matloc_int> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_matloc_int>-at101.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'AT102'
 OF STRUCTURE <lfs_matloc_int> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_matloc_int>-at102.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'AT103'
 OF STRUCTURE <lfs_matloc_int> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_matloc_int>-at103.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'AT104'
 OF STRUCTURE <lfs_matloc_int> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_matloc_int>-at104.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'AT105'
 OF STRUCTURE <lfs_matloc_int> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_matloc_int>-at105.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 endif.
 ENDIF.
 ASSIGN COMPONENT 'PRVAR'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-prvar.
 INSERT <lfs_value_list> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'PARPR'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-parpr.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'VARID'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-varid.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'VARCT'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-varct.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'VARTX'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-vartx.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'DMOAP'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-dmoap.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'PRDID'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-prdid.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'BRFAM'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-brfam.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'MATKL'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-matkl.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'BRDIF'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-brdif.
 INSERT <lfs_attribute> INTO TABLE ct_value_list.
 ENDIF.
 ASSIGN COMPONENT 'MEIND'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-meind.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'MKLEN'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-mklen.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'PCKTY'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-pckty.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'ITPCK'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-itpck.
 INSERT <lfs_attribute> INTO TABLE ct_value_list.
 ENDIF.
 ASSIGN COMPONENT 'PMEIN'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-pmein.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'MKTHK'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-mkthk.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'FLIND'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-flind.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'EDTID'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-edtid.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'BNDTY'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-bndty.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'ITBND'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-itbnd.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'ITCSE'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-itcse.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'TPCOL'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-tpcol.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'SPFLV'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-spflv.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'PRSHP'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-prshp.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'MKTGR'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-mktgr.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'SUBMK'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-submk.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'BOMHD'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-bomhd.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'BRDSC'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-brdsc.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'MKSTR'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-mkstr.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'EDDSC'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-eddsc.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'EDCAT'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-edcat.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'CCIND'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-ccind.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'CGSTY'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-cgsty.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'FLTTY'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-fltty.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'CPIND'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-cpind.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'MBIND'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-mbind.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'USPRP'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-usprp.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'EDDET'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-eddet.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'BRGEW'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-brgew.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'NTGEW'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-ntgew.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'GEWEI'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-gewei.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'VOLUM'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-volum.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'VOLEH'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-voleh.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'DMOAPP1'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-dmoapp1.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'MAKTX'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-maktx.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ASSIGN COMPONENT 'RPLVL'
 OF STRUCTURE <lfs_value_list> TO <lfs_attribute>.
 IF <lfs_attribute> IS ASSIGNED.
 <lfs_attribute> = <lfs_value_list>-rplvl.
 INSERT <lfs_attribute> INTO TABLE <lv_value_list>.
 ENDIF.
 ENDLOOP.
 ENDIF.
ENDIF.
I get a shortdump in the code for the above code. There are diff types of inserts that I am trying to do and each one gives a short dump.
Looking forward to your inputs.
Your program is not applicable in my case as I have ct_value_list passed as a changing parameter of type standard table in my APO BADI.
cheers
Aveek

Field-Symbols: How to retrieve data into an internal table from FS

Hello All,
I am working on field symbols.I have declared the field symbols as shown.
FIELD-SYMBOLS: <gt_pos_data> TYPE table,
 <wa_pos_data> like <gt_pos_data>.
Data: Begin of itab occurs 0,
 field1(5) type c,
 field2(10)_type c,
 end of itab.
The FS <gt_pos_data> has 100 fields but I need to move only two fields from this FS to my internal table itab.I am doing the following.
loop at <gt_pos_data> assigning <wa_pos_data>.
itab-field1 = <wa_pos_data>-field1.
itab-field2 = <wa_pos_data>-field2.
append itab.
clear itab.
endloop.
But it is giving me an error saying "<wa_pos_data> is a table without header line and therefore has no componet FIELD1".How to achieve this requirement?
Thanks in advance
Sandeep

<wa_pos_data> should be defined LIKE LINE OF <gt_pos_data>, but it will still have no structure, so you need to assign a field symbol to the component as well.
FIELD-SYMBOLS: <gt_pos_data> TYPE table,
 <wa_pos_data> like LINE OF <gt_pos_data>,
 <field> type any.
Data: Begin of itab occurs 0,
field1(5) type c,
field2(10)_type c,
end of itab.
loop at <gt_pos_data> assigning <wa_pos_data>.
assign componet 'FIELD1' of structure <wa_pos_data> to <field>.
if sy-subrc = 0.
itab-field1 = <field>.
endif.
assign componet 'FIELD2' of structure <wa_pos_data> to <field>.
if sy-subrc = 0.
itab-field2 = <field>.
endif.
append itab.
clear itab.
endloop.
Regards,
Rich Heilman

Select data into deep internal table

Dear Experts.
I created a dynamiv deep internal table.
while selecting data , into the internal table it is giving a dump. saying that deep structure.
SELECT OBJTY OBJID ARBPL WERKS from crhd
INTO CORRESPONDING FIELDS OF TABLE <f_tab>
where WERKS = pr_werks.
I used the field catalog also.even same error is comming.
how to get data into deep internal table by select statement.
Please help me,
Regards,
Rahul

HI,
Try creating dynamic internal table like:
Field-symbols: <dyn_table> type standard table,
 <dyn_wa> ,
 <dyn_field>.
Data: dy_table type ref to data,
 ifc type lvc_t_fcat ,
 xfc type lvc_s_fcat ,
 Count type i ,
 Count1 type i ,
 Index type i ,
 dy_line type ref to data.
 Data counter type i.
Data: line type string ,
 List like table of line.
Data: idetails type abap_compdescr_tab,
 xdetails type abap_compdescr .
Data: ref_table_des type ref to cl_abap_structdescr.
*Looping at field cat internal table to populate another field cat to be passed
* In method used below for creating final dynamic internal table
Loop at fieldcat into fieldcat1.
 Clear xfc.
 Xfc-fieldname = fieldcat1-fieldname.
 Xfc-datatype = fieldcat1-datatype.
 Xfc-intlen = fieldcat1-intlen.
 Append xfc to ifc.
endloop.
Clear fieldcat1.
*Method called to create dynamic internal table on the basis of field catalog created above
Call method cl_alv_table_create=>create_dynamic_table
 Exporting
 it_fieldcatalog = ifc u201Cfield catalog appended above
 Importing
 ep_table = dy_table. u201CDynamic internal table which will be created
Assign dy_table->* to <dyn_table>.
*Create dynamic work area and assign to FS
Create data dy_line like line of <dyn_table>.
Assign dy_line->* to <dyn_wa>.
Then use this dynamic internal table created from above method
in the Select Query.
Hope it helps
Regards
Mansi

How to use CrossReference and DVM in ODI &how to populate data into Xref

Can any one tell how to use Domain Value Maps and Cross Referencing in ODI?
DVM or Domain Value Map are created and used in ESB console of SOA suite.
My actual requirement is as follows:
The below steps describe loading data from ERP Application 1 to ERP Application 2.
1. The Source Application ERP APP1, populates the interface table using their native technology.
2. A job scheduler invokes the Source side ODI Package.
3. ODI then extracts the data from Source Interface table and populates the Target Interface table.
4. After populating the Target interface table the ODI populates the X-ref table with App 1 ID and generated common ID.
5. The ODI either deletes or updates the rows that were processed from the Source interface table.
6. On the Target Application ERP APP2, the native application extracts data from target interface table and populates target database there by generating ERP Application 2 ID.
7. A job scheduler on the Target application invokes the ODI package to populate the Application 2 ID onto the Xref table matching on the Common ID.
I just want to know :
1. How to populate data into the Xref table from Source datastore
2. And if data is successfully laoded from target datastore to actual base table of target then how to populate the target id into the cross reference table.

can anyone suggest me some answer, then it would be of great help?

How to add new field into dynamic internal table

Hello Expert.
how to add new field into dynamic internal table.
PARAMETERS: P_TABLE(30). "table name
DATA: I_TAB TYPE REF TO DATA.
FIELD-SYMBOLS: <TAB> TYPE standard TABLE.
*Create dynamic FS
create DATA I_TAB TYPE TABLE OF (p_table).
ASSIGN I_TAB->* TO <TAB>.
SELECT * FROM (p_table) INTO TABLE <TAB>.
 here i want to add one more field into <TAB> at LAST position and my
 Field name = field_stype and
 Field type = 'LVC_T_STYL'
could you please helpme out .

Hi,
Please find the code below.You can add the field acc to your requirement.
Creating Dynamic internal table
TYPE-POOLS: slis.
FIELD-SYMBOLS: <t_dyntable> TYPE STANDARD TABLE, u201C Dynamic internal table name
 <fs_dyntable>, u201C Field symbol to create work area
 <fs_fldval> type any. u201C Field symbol to assign values
PARAMETERS: p_cols(5) TYPE c. u201C Input number of columns
DATA: t_newtable TYPE REF TO data,
 t_newline TYPE REF TO data,
 t_fldcat TYPE slis_t_fldcat_alv,
 t_fldcat TYPE lvc_t_fcat,
 wa_it_fldcat TYPE lvc_s_fcat,
 wa_colno(2) TYPE n,
 wa_flname(5) TYPE c.
Create fields .
DO p_cols TIMES.
 CLEAR wa_it_fldcat.
 move sy-index to wa_colno.
 concatenate 'COL'
 wa_colno
 into wa_flname.
 wa_it_fldcat-fieldname = wa_flname.
 wa_it_fldcat-datatype = 'CHAR'.
 wa_it_fldcat-intlen = 10.
 APPEND wa_it_fldcat TO t_fldcat.
ENDDO.
Create dynamic internal table and assign to FS
CALL METHOD cl_alv_table_create=>create_dynamic_table
 EXPORTING
 it_fieldcatalog = t_fldcat
 IMPORTING
 ep_table = t_newtable.
ASSIGN t_newtable->* TO <t_dyntable>.
Create dynamic work area and assign to FS
CREATE DATA t_newline LIKE LINE OF <t_dyntable>.
ASSIGN t_newline->* TO <fs_dyntable>.
Populating Dynamic internal table
DATA: fieldname(20) TYPE c.
DATA: fieldvalue(10) TYPE c.
DATA: index(3) TYPE c.
DO p_cols TIMES.
 index = sy-index.
 MOVE sy-index TO wa_colno.
 CONCATENATE 'COL'
 wa_colno
 INTO wa_flname.
Set up fieldvalue
 CONCATENATE 'VALUE' index INTO
 fieldvalue.
 CONDENSE fieldvalue NO-GAPS.
 ASSIGN COMPONENT wa_flname
 OF STRUCTURE <fs_dyntable> TO <fs_fldval>.
 <fs_fldval> = fieldvalue.
ENDDO.
Append to the dynamic internal table
APPEND <fs_dyntable> TO <t_dyntable>.
Displaying dynamic internal table using Grid.
DATA: wa_cat LIKE LINE OF fs_fldcat.
DO p_cols TIMES.
 CLEAR wa_cat.
 MOVE sy-index TO wa_colno.
 CONCATENATE 'COL'
 wa_colno
 INTO wa_flname.
 wa_cat-fieldname = wa_flname.
 wa_cat-seltext_s = wa_flname.
 wa_cat-outputlen = '10'.
 APPEND wa_cat TO fs_fldcat.
ENDDO.
Call ABAP List Viewer (ALV)
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 it_fieldcat = fs_fldcat
 TABLES
 t_outtab = <t_dyntable>.

How to read a table and transfer the data into an internal table?

Hello,
I try to read all the data from a table (all attribute values from a node) and to write these data into an internal table. Any idea how to do this?
Thanks for any help.

Hi,
Check this code.
Here i creates context one node i.e flights and attributes are from SFLIGHT table.
DATA: lo_nd_flights TYPE REF TO if_wd_context_node,
 lo_el_flights TYPE REF TO if_wd_context_element,
 ls_flights TYPE if_main=>element_flights,
 it_flights type if_main=>elements_flights.
navigate from <CONTEXT> to <FLIGHTS> via lead selection
lo_nd_flights = wd_context->get_child_node( 'FLIGHTS' ).
CALL METHOD LO_ND_FLIGHTS->GET_STATIC_ATTRIBUTES_TABLE
IMPORTING
 TABLE = it_flights.
now the table data will be in internal table it_flights.

How to read data from an internal table into a real table?

Hello experts,
I'm relatively new to ABAP and I'm trying to figure out how to read data from an internal table into a table that I created. I'm trying to use the RRW3_GET_QUERY_VIEW_DATA function module to read data from a multiprovider. I'm trying to read data from the e_cell_data and e_axis_data tables into a table that I've already created. Please see code below.
TABLES MULTITAB.
DATA:
query_name TYPE RSZCOMPID,
s_cubename TYPE RSINFOPROV,
t_cell_data TYPE RRWS_T_CELL,
t_axis_data TYPE RRWS_THX_AXIS_DATA,
t_axis_info TYPE RRWS_THX_AXIS_INFO,
wa_t_cell_data like line of t_cell_data,
wa_t_axis_data like line of t_axis_data,
w_corp_tab like line of t_cell_data.
s_cubename = 'CORP_MPO1'.
query_name = 'Z_corp_test'.
 CALL FUNCTION 'RRW3_GET_QUERY_VIEW_DATA'
 EXPORTING
 i_infoprovider = s_cubename
 i_query = query_name
 i_t_parameter = query_string_tab
 IMPORTING
 e_cell_data = t_cell_data
 e_axis_data = t_axis_data
 e_axis_info = t_axis_info.
If anyone has any information to help me, I would greatly appreciate it. Thanks.

Hi,
<li>Once you call the function module RRW3_GET_QUERY_VIEW_DATA, lets say data is available in the corresponding tables e_cell_data e_axis_data which you have mentioned.
<li>Modify your internal table defined for other purpose, with data from e_cell_data e_axis_data like below.
LOOP AT t_cell_data INTO wa_t_cell_data.
"Get the required data from t_cell_data.
MOVE-CORRESPONDING wa_t_cell_data TO it_ur_tab.
"Modify your internal table wih data
MODIFY it_ur_tab TRANSPORTING <field1> <field2> <field3>.
ENDLOOP.
LOOP AT t_axis_data INTO wa_t_axis_data.
"Get the required data from t_cell_data.
MOVE-CORRESPONDING wa_t_axis_data TO it_ur_tab.
"Modify your internal table wih data
MODIFY it_ur_tab TRANSPORTING <field1> <field2> <field3>.
ENDLOOP.
Thanks
Venkat.O

How to populate data into Dynamic Internal Table.

Similar Messages

Maybe you are looking for