How to populate data into view object

Hi all,
I am quite new with ViewObject.
I have one data table which is binding with view object.
I want to populate data into view object from my managed bean.
how can i achieve this kind of scenario?
actually i try to get view object as in the following. but i get only null.
ViewObject viewobject = DCIteratorBinding.getViewObject();
With Regards,
Wai Phyo

Hi,
You could use the following code snippet to get handle to view object from the iterator.
FacesContext fc = FacesContext.getCurrentInstance();
BindingContainer bindings =
(BindingContainer)fc.getApplication().evaluateExpressionGet(fc,
"#{bindings}",
BindingContainer.class);
DCBindingContainer bc = (DCBindingContainer)bindings;
DCIteratorBinding iterator =
bc.findIteratorBinding("<ITERATOR_ID>");
ViewObject viewObject = iterator.getViewObject();
// Perform operations on the view objectThanks,
Navaneeth

Similar Messages

How to use CrossReference and DVM in ODI &how to populate data into Xref

Can any one tell how to use Domain Value Maps and Cross Referencing in ODI?
DVM or Domain Value Map are created and used in ESB console of SOA suite.
My actual requirement is as follows:
The below steps describe loading data from ERP Application 1 to ERP Application 2.
1. The Source Application ERP APP1, populates the interface table using their native technology.
2. A job scheduler invokes the Source side ODI Package.
3. ODI then extracts the data from Source Interface table and populates the Target Interface table.
4. After populating the Target interface table the ODI populates the X-ref table with App 1 ID and generated common ID.
5. The ODI either deletes or updates the rows that were processed from the Source interface table.
6. On the Target Application ERP APP2, the native application extracts data from target interface table and populates target database there by generating ERP Application 2 ID.
7. A job scheduler on the Target application invokes the ODI package to populate the Application 2 ID onto the Xref table matching on the Common ID.
I just want to know :
1. How to populate data into the Xref table from Source datastore
2. And if data is successfully laoded from target datastore to actual base table of target then how to populate the target id into the cross reference table.

can anyone suggest me some answer, then it would be of great help?

How to populate data into a tabular datablock from a cursor in oracle forms

Hello experts,
              I am new in oracle forms.I am using Oracle forms 11g with weblogic server 10.3.5 at windows 7.My issue is that I am trying to populate data from a cursor into a tabular datablock(record number property is set to 5).I am using a button press trigger with code as:
declare
    cursor c3 is select empno,ename from emp;
begin
    go_block('C');
    first_record;
    loop
    open c3;
    Fetch C3 into :c.t1,
:c.t2;
Exit when :system.last_record = 'TRUE';
next_record;
Close C3;
    End loop;
    end;
Everything is OK here except,I have 5 record rows in C datablock but only first record is fetched into datablock.I want all records are fetched into data block
Thank you
regards
aaditya

Yes
when i m using below query,so binary data display not display actual format
select UTL_RAW.CAST_TO_VARCHAR2 (DBMS_LOB.SUBSTR(SOAPRTFDESC,10,1)) from soaptxsection

How to populate data into multi_org view ?

I do know that a table with ALL is multiorg table and the same table minus ALL is called Multiorg view. I want to know
1). where exactly we come across the situation in which we use the multi_org view and
2). how the data is populated into it.
I do know that the view contains data about a particular ORG. But how ?
(Assume that we are using the above concept while developing a report and answer accordingly
I am eagerly searching for the answer.
your help is appreciated
Pradeep

Hi Pradeep,
Views don't contain any data. Tables do. The multiorg tables (for instance, PO_HEADERS_ALL) contain a column called ORG_ID, which is the id of the operating unit owning each record (a purchase order, in this case). When someone logs in to create a new pucharse order (to continue with the example), he does it selecting a responsibility which have an operating unit (org_id) assigned to it. When the user saves the purchase order, the system will save it automatically with that org_id.
When the user tries to see purchase orders, he does it through the multiorg view (PO_HEADERS) which is basically a query on PO_HEADERS_ALL restricting by operating unit, i.e:
PO_HEADERS IS SELECT * FROM PO_HEADERS_ALL WHERE org_id = <Responsibility Org Id>. So, the user will be able to see only the purchase orders assigned tohis operating unit.
The operating unit gets assigned to a responsibility using profile option 'MO: Operating Unit'.
This is the idea behind 11i. R12 is using typically a new architecture called MOAC, which is somehow more complicated and allow access to multiple operating units.
Hope it helps.

How to populate data into Dynamic Internal Table.

Hi Experts,
I had created one Dynamic Internal table and one static internal table.I want to move data from Static Internal table to Dynamic interal table.And aslo the number of coloum of these two tables are not same.
So please help me for solving this issue.
Thanks,
Seema.

Hi,
Check out this sample program for dynamictable report.
REPORT YMS_DYNAMICDEMO
 NO STANDARD PAGE HEADING
 MESSAGE-ID zcs_c2c_001.
type-pools : abap.
field-symbols: <dyn_table> type standard table,
 <dyn_wa>,
 <dyn_field>.
data: dy_table type ref to data,
 dy_line type ref to data,
 xfc type lvc_s_fcat,
 ifc type lvc_t_fcat.
selection-screen begin of block b1 with frame.
parameters: p_table(30) type c default 'T001'.
selection-screen end of block b1.
start-of-selection.
perform get_structure.
perform create_dynamic_itab.
perform get_data.
perform write_out.
form get_structure.
data : idetails type abap_compdescr_tab,
 xdetails type abap_compdescr.
data : ref_table_des type ref to cl_abap_structdescr.
Get the structure of the table.
ref_table_des ?=
 cl_abap_typedescr=>describe_by_name( p_table ).
idetails[] = ref_table_des->components[].
loop at idetails into xdetails.
 clear xfc.
 xfc-fieldname = xdetails-name .
 xfc-datatype = xdetails-type_kind.
 xfc-intlen = xdetails-length.
 xfc-decimals = xdetails-decimals.
 append xfc to ifc.
endloop.
endform.
form create_dynamic_itab.
Create dynamic internal table and assign to FS
call method cl_alv_table_create=>create_dynamic_table
 exporting
 it_fieldcatalog = ifc
 importing
 ep_table = dy_table.
assign dy_table->* to <dyn_table>.
Create dynamic work area and assign to FS
create data dy_line like line of <dyn_table>.
assign dy_line->* to <dyn_wa>.
endform.
form get_data.
Select Data from table.
select * into table <dyn_table>
 from (p_table).
endform.
form write_out.
Write out data from table.
loop at <dyn_table> into <dyn_wa>.
 do.
 assign component sy-index
 of structure <dyn_wa> to <dyn_field>.
 if sy-subrc <> 0.
 exit.
 endif.
 if sy-index = 1.
 write:/ <dyn_field>.
 else.
 write: <dyn_field>.
 endif.
 enddo.
endloop.
endform.
Thanks,
Shankar

How to populate data into SHP_BAPI_OBDLV_REPLICA_CALL In ECC

Hi,
i am transfering custom fieldsand standard fields from ECC to EWM when VMI STO outbound order is created in ECC using QRFC.
my requirement is to fill the partner details and refernce document details, item details in SHP_BAPI_OBDLV_REPLICA_CALL table parameters
in ECC.
is there any BADI or user exit to fill table parameters of SHP_BAPI_OBDLV_REPLICA_CALL to transfer data from ECC to EWM.
please help me how to fill that table parameters to transfer data from ECC to EWM.
Please answer it.
Thanks,
phani

Hi,
i am transfering custom fieldsand standard fields from ECC to EWM when VMI STO outbound order is created in ECC using QRFC.
my requirement is to fill the partner details and refernce document details, item details in SHP_BAPI_OBDLV_REPLICA_CALL table parameters
in ECC.
is there any BADI or user exit to fill table parameters of SHP_BAPI_OBDLV_REPLICA_CALL to transfer data from ECC to EWM.
please help me how to fill that table parameters to transfer data from ECC to EWM.
Please answer it.
Thanks,
phani

How to populate data from table into datagrid in form

hi there. may i know how to populate data from a table into a datagrid? i have created a datagrid in a form using OLE's microsoft datagrid. i'm having problem to populate data from table into the grid. can i know how to do that? thanks

Not exactly. I want to enter input from form and the user can have all options to choose i.e. HIGH, MEDIUM or so on.
Suppose, you have option to select HIGH, MEDIUM or LOW and you can see all these options together. You select LOW and when you save, it is saves in the table as a value. So when you view the table again, it will show LOW as active and HIGH and MEDIUM are null.

How to extract Cognos Data into Business Objects?

Hi All,
I would like to know whether anyway to pull Cognos data into Business Objects?
1. Pull data thru Universe from Cognos Cubes?
2. Pull data using Crystal reports from Cognos Cubes?
3. Or any otehr method of pulling data from Cognos Cubes?
If nothing is possible I would have to explore using the RDBMS Tables to build Universe, WebI and then present in Xcelsius. Anybody is aware of getting data from Cognos?
Thanks in advance.
Alex.

Cognos Reporting on SAP BI data
We need to create a new project to import the structure of the SAP BI cube or Multiprovider.
Enter User ID and password.
Click on OK
It will ask you to enter the User ID and password again. After enter the User ID and password it will ask you to select the language.
Then it will ask you to select the metadata source, select the Data source as shown in below fig. and click next.
Select the data Source as shown in below.
Here we are planning to import SAP BW cube so we have to select SAP BW and click on next.
Select sign on and Click on OK.
Here we have to select our desired cube or multiprovider and click next.
Now we have to select the language again.
Here Cognos is giving the flexibility to use different options when importing cube structures.
Here I am selecting to use the technical name of the objects and to bring same model as it is in SAP BI.
Finally it will show list of all objects which are imported from SAP BI.
When you click on finish it will take to the frame work manager. There you will see the SAP BI Cube Structure.
Now it is exactly imported like SAP BW extended star schema model.
Here you can compare the technical names of the dimensions in both in Cognos and SAP BI is same.
         COGNOS    Model                                         SAP BI Cube model
Here I am comparing the values of the info Objects with in one dimension.
               Cognos Model                                                   SAP BI Model
If there are any hierarchies in BI, it will form separately as shown in below fig.
When you open the main object of Program definition, we will find 3 objects under this.
It is always recommendable to use Level 01 objects.
This is how it looks when you open all the above 3 objects. You can use any of those depends on your report requirement.
When you open the info object if you see number of different items, that means this info object has got attributes in it.
0COMP_CODE is the technical name of the info object in BI.
In Cognos if it technical name starts with 1  Short Text of the Info Object.
                                                                   2  Key of the Info Object.
                                                                   4  Long Text of the Info Object.
                                                         5  Medium Text of the Info Object.
LELEL00  Is Summarized values.
LEVEL01  Is Item level values of Info Object.
Once you see this in bw/bi environment, i hope you know how to gather and use it in BOBJ environment !!

How to populate data in MPP through F4 search help(the field should get filtered as per key)

Dear Experts.
I am new to ABAP and hence trying jmy hands on various ways of peforming a task.
I have a requirement. I want to maintain a database tables through MPP : ZLT_Auftrag (Refer Screen Shot 1: Doubt MPP1) and ZLT_Kunde (Refer Screen Shot2: Doubt MPP2)
The fields of ZLT_Kunde are: K1, K2, K3
The fields of ZLT_Auftrag are: A1, A2, A3, A4, P1 P2 and P3 are related as per the key field "A3" (Here A3 = K2)
I want the User to be able to Maintain this table through the Screen that I had created using MPP. (Plz refer the attached Screen Shot3:Doubt MPP3 of the SCREEN in MPP)
When I populate the Kunde name(K1) in the SCREEN (Can be done by F4 Search help), then on hitting the pushbutton "Get Kunde" the kunde Code (K2) appears . Now from here it can be deleted or even a new Kunde name and code can be saved dirctly to the database table : ZLT_Kunde. (Refer Screen Shoot4: Doubt MPP4)
For Example for Kunde (K1)= BASF, Kunde Code (K2) = BSF, the Auftrag should be all those values from ZLT_Auftrag (where A3 = BSF)
When I try to populate the Auftrag value on the SCREEN then on hitting F4 (already created for table ZLT_Auftrag in se11) then I get all the values of Auftrag (A1) from the table ZLT_Auftrag. (Ply refer Screen Shot 5: Doubt MPP5)
MY REQUIREMENT: Here I want that either through F4 help or through drop down ONLY those values of Auftrag-A1 should appear on the SCREEN which satisfies the condition: A3 = K2
I am unbale to get how to do that.
I need your valuable suggstions.
Regards
Chandan

And the code of the MPP is:
*& Module Pool SAPMZDEMO_MPOOL_03
PROGRAM SAPMZDEMO_MPOOL_03.
TABLES: ZLT_MITA, ZLT_Kunde, ZLT_Auftrag, Zlt_Stdsatz.
DATA: flg_lock TYPE c,
* indx TYPE i,
* indxk TYPE i,
* indxa TYPE i,
* TCNT TYPE sy-tabix,
 lv_msgv1 TYPE sy-msgv1.
*DATA: it_mita TYPE TABLE OF ZLT_mita,
* it_kunde TYPE TABLE OF ZLT_KUNDE,
* it_auftrag TYPE TABLE OF ZLT_AUFTRAG.
*& Module STATUS_9000 OUTPUT
* text
module STATUS_9000 output.
SET PF-STATUS 'ZSTATUS01'.
* SET TITLEBAR 'xxx'.
If flg_lock is Not initial.
 LOOP at Screen.
If screen-group1 = 'G1'.
Screen-input = 0.
MODIFY SCREEN.
 Endif.
 ENDLOOP.
 MESSAGE s000(8i) WITH 'Mitarbeiter already locked by user' lv_msgv1.
ENDIF.
endmodule. " STATUS_9000 OUTPUT
*& Module USER_COMMAND_9000 INPUT
* text
module USER_COMMAND_9000 input.
*To Populate Data into Mitarbeiter through Pushbuttons
CASE sy-ucomm.
 When 'OK_GET'.
 Clear : flg_lock.
 IF ZLT_MITA-M1 is NOT INITIAL.
 SELECT SINGLE *
 FROM ZLT_MITA
 Where M1 = ZLT_MITA-M1.
*To create a Lock Object so that when two or more employees are accessing the same data
* at the same time then for the new user the data gets locked and only can been seen in
*display mode
 IF sy-subrc = 0.
 CALL FUNCTION 'ENQUEUE_EZLT_MITALOCK'
 EXPORTING
 MODE_ZLT_MITA = 'E'
 MANDT = SY-MANDT
 M1 = ZLT_MITA-M1
* X_M1 = ' '
* _SCOPE = '2'
* _WAIT = ' '
* _COLLECT = ' '
 EXCEPTIONS
 FOREIGN_LOCK = 1
 SYSTEM_FAILURE = 2
 OTHERS = 3
 IF sy-subrc <> 0.
 flg_lock = 'X'.
 lv_msgv1 = sy-msgv1.
 ENDIF.
 ENDIF.
 ELSE.
 MESSAGE S000(8i) With 'Enter Mitarbeiter Name'.
 ENDIF.
 When 'OK_SAVE'.
 Modify ZLT_MITA.
 IF sy-subrc = 0.
 MESSAGE s000(8i) With 'Data Saved'.
 ENDIF.
 When 'OK_DELETE'.
 IF ZLT_MITA-M1 is NOT INITIAL.
 DELETE
 FROM ZLT_MITA
 Where M1 = ZLT_MITA-M1.
 IF sy-subrc = 0.
 MESSAGE S000(8i) With 'Data deleted'.
 ENDIF.
 ENDIF.
* When 'OK_FIRST'.
* indx = 1.
* When 'OK_NEXT'.
* indx = indx + 1.
* When 'OK_PREV'.
* indx = indx - 1.
* When 'OK_LAST'.
* Describe Table it_mita lines indx.
*To Populate Data into Kunde through Pushbuttons
 When 'OK_GETK'.
 IF ZLT_Kunde-K1 is NOT INITIAL.
 SELECT SINGLE *
 FROM ZLT_Kunde
 Where K1 = ZLT_KUNDE-K1.
 ELSE.
 MESSAGE S000(8i) With 'Enter Kunde Name'.
 ENDIF.
 When 'OK_SAVEK'.
 Modify ZLT_Kunde.
 IF sy-subrc = 0.
 MESSAGE s000(8i) With 'Data Saved'.
 ENDIF.
 When 'OK_DELETEK'.
 IF ZLT_KUNDE-K1 is NOT INITIAL.
 DELETE
 FROM ZLT_KUNDE
 Where K1 = ZLT_KUNDE-K1.
 IF sy-subrc = 0.
 MESSAGE S000(8i) With 'Data deleted'.
 ENDIF.
 ENDIF.
*To Populate Data into Auftrag Through Pushbuttons
 When 'OK_GETA'.
 IF ZLT_KUnde-K2 is NOT INITIAL.
 SELECT SINGLE *
 FROM ZLT_Auftrag
 Where A3 = ZLT_Kunde-K2.
 ELSE.
 MESSAGE S000(8i) With 'Enter Kunde Name'.
 ENDIF.
 When 'OK_SAVEA'.
 Modify ZLT_Auftrag.
 IF sy-subrc = 0.
 MESSAGE s000(8i) With 'Data Saved'.
 ENDIF.
 When 'OK_DELETEA'.
 IF ZLT_Auftrag-A1 is NOT INITIAL.
 DELETE
 FROM ZLT_Auftrag
 Where A1 = ZLT_Auftrag-A1.
 IF sy-subrc = 0.
 MESSAGE S000(8i) With 'Data deleted'.
 ENDIF.
 ENDIF.
*To Populate Data into Position Thorugh Pushbuttons
 When 'OK_GETP'.
 IF ZLT_Auftrag-A2 is NOT INITIAL.
 SELECT SINGLE *
 FROM ZLT_Auftrag
 Where A3 = ZLT_Kunde-K2.
 ELSE.
 MESSAGE S000(8i) With 'Enter Kunde Name'.
 ENDIF.
 When 'OK_SAVEP'.
 Modify ZLT_Auftrag.
 IF sy-subrc = 0.
 MESSAGE s000(8i) With 'Data Saved'.
 ENDIF.
 When 'OK_DELETEP'.
 IF ZLT_Auftrag-A1 is NOT INITIAL.
 DELETE
 FROM ZLT_Auftrag
 Where A1 = ZLT_Auftrag-A1.
 IF sy-subrc = 0.
 MESSAGE S000(8i) With 'Data deleted'.
 ENDIF.
 ENDIF.
 When 'OK_EXIT'.
 Leave Program.
 When 'OK_CLEAR'.
 Clear : ZLT_MITA, ZLT_KUNDE, ZLT_AUFTRAG.
* it_mita, it_kunde, it_auftrag,
 CALL FUNCTION 'DEQUEUE_EZLT_MITALOCK'
 EXPORTING
 MODE_ZLT_MITA = 'E'
 MANDT = SY-MANDT
 M1 = ZLT_MITA-M1
* X_M1 = ' '
* _SCOPE = '3'
* _SYNCHRON = ' '
* _COLLECT = ' '
ENDCASE.
endmodule. " USER_COMMAND_9000 INPUT
*& Module user_cmd_9000 INPUT
* text
module user_cmd_9000 input.
If sy-ucomm = 'OK_CANCEL'.
LEAVE PROGRAM.
ENDIF.
IF sy-ucomm = 'OK_EXIT'.
 LEAVE PROGRAM.
ENDIF.
endmodule. " user_cmd_9000 INPUT

How to Get data into I_ table which is Created dynamically

Hi Guys ,
I created one dynamic internal table , now I am want to display same internal table in my ALV? , how can I populate data into this internal table from my internal table based on some condition.
My Requirement is?
I have to display like this
1.This is my heading (field_cat of my ALV in which pack size may varry based on the flavor).
Plant flavor pack_size1----
pack_size-n
2. I have internal table( itab2) with all the pack-sizes and plant details.
3. how can I pass the these data into (itab1) which going to display in ALV ?
I can loop at itab2.
How to pass this data into itab1 relevent fields ?
Looking for Val. Inputs
With Best Regards
Prabhu
TC-Team SAP
Pepsi India
[email protected]

Hi,
This is a code snippet.
 DATA: r_dyn_table TYPE REF TO data,
 r_wa_dyn_table TYPE REF TO data,
 l_fields_table type SOI_FIELDS_TABLE.
 FIELD-SYMBOLS: <t_dyn_table> TYPE STANDARD TABLE,
 <wa_dyn_table> TYPE ANY,
 <w_field1> TYPE ANY,
 <w_field2> TYPE ANY.
 DATA: l_oref_structure TYPE REF TO cl_abap_structdescr,
 l_abap_compdescr type abap_compdescr.
 data: check1 type i,
 check2 type i,
 l_range(20).
 r_dyn_table = IL_DYNDATA-r_dyn_table.
 ASSIGN r_dyn_table->* TO <t_dyn_table>.
 CREATE DATA r_wa_dyn_table LIKE LINE OF <t_dyn_table>.
 ASSIGN r_wa_dyn_table->* TO <wa_dyn_table>.
 l_oref_structure ?= cl_abap_typedescr=>describe_by_data(
 wa_supl ).
 loop at il_fill_itab into wa_supl.
 loop at l_oref_structure->COMPONENTS into l_abap_compdescr.
 ASSIGN COMPONENT l_abap_compdescr-name
 OF STRUCTURE wa_supl TO <w_field1>.
 check1 = sy-subrc.
 ASSIGN COMPONENT l_abap_compdescr-name
 OF STRUCTURE <wa_dyn_table> TO <w_field2>.
 check2 = sy-subrc.
 if check1 = 0 and check2 = 0.
 <w_field2> = <w_field1>.
 endif.
 endloop.
 APPEND <wa_dyn_table> TO <t_dyn_table>.
 endloop.
You can access your dynamic internal table via a field symbol.
Svetlin

How to reference the Parent view Object attribute in Child View object

Hi , I have the requirememt to generate Tree like struture to display Salary from joining date to retirement date in yearly form.I have writtent two Pl/SQL function to return parent node and child nodes(based on selected year).
1.First function --> Input paramter (employee id, retirement date , joining date) --> return parent node row with start_date and end_date
2. 2nd function --> input paarmter(employee id, startDate, end_date) --> return child node based on selected parent node i.e. start date and end date
I have created two ADF view object based on two function return
Parent Node --> select * from Table( EUPS.FN_GET_CONTR_SAL_BY_YR(employeeId,retirement Date, dateOf joining)) ;
Child Node --> select * FROM TABLE( EUPS.FN_GET_CONTR_SAL_FOR_YEAR( employeId,startDate, endDate) ) based on selected parent node.
I am giving binding variable as input for 2nd function (child node) . I don't know how to reference the binding variable value in child view from parent view.
Like I have to refernce employeId,startDate, endDate values in 2nd function from parent view object. some thing like parentNode.selectedStart_date parentNode.employeeId.
I know we can achive this writing the code in backing bean.But i want to know how can we refernce parent view object attribute values in child view object using Groovy or otherway?
I will appreciate your help.
Thanks

I have two view com.ContractualSalaryByYearlyView for Parent Node and com.ContractualSalaryByYearlyView for child Node.
I have created view link(ContractualSalYearlyByYearViewLink) betweem two view by giving common field empId, stDate , endDate.(below is the view link xml file).
I tried give the binding attribute values using parent object reference like below in com.ContractualSalaryByYearlyView xml file but getting error
Variable ContractualSalaryByYearlyView not recognized.I think i am using groovy expression.
Thanks for quick response.
com.ContractualSalaryByYearlyView xml
<ViewObject
<DesignTime>
<Attr Name="_isExpertMode" Value="true"/>
</DesignTime>
<Variable
Name="empId"
Kind="where"
Type="java.lang.Integer">
<TransientExpression><![CDATA[adf.object.ContractualSalaryByYearlyView.EmpId]]></TransientExpression>
</Variable>
ContractualSalYearlyByYearViewLink.xml file
<ViewLinkDefEnd
Name="ContractualSalaryByYearlyView"
Cardinality="1"
Owner="com.ContractualSalaryByYearlyView"
Source="true">
<DesignTime>
<Attr Name="_finderName" Value="ContractualSalaryByYearlyView"/>
<Attr Name="_isUpdateable" Value="true"/>
</DesignTime>
<AttrArray Name="Attributes">
<Item
Value="com.ContractualSalaryByYearlyView.EmpId"/>
<Item
Value="com.ContractualSalaryByYearlyView.StDate"/>
<Item
Value="com.ContractualSalaryByYearlyView.EndDate"/>
</AttrArray>
</ViewLinkDefEnd>
<ViewLinkDefEnd
Name="ContractualSalaryForYearView"
Cardinality="-1"
Owner="com.ContractualSalaryForYearView">
<DesignTime>
<Attr Name="_finderName" Value="ContractualSalaryForYearView"/>
<Attr Name="_isUpdateable" Value="true"/>
</DesignTime>
<AttrArray Name="Attributes">
<Item
Value="com.ContractualSalaryForYearView.EmpId"/>
<Item
Value="com.ContractualSalaryForYearView.StDate"/>
<Item
Value="com.ContractualSalaryForYearView.EndDate"/>
</AttrArray>
</ViewLinkDefEnd>

How to select data for nested object (Object based on another objects)

Hi,
I have written the following code, but I am not able to fetch data as I fetch from normal table, Plz help.
Following is the sample code -
CREATE TYPE A_OBJ IS OBJECT (
A_NAME VARCHAR2 (100),
A_DESC VARCHAR2 (100)
CREATE TYPE A_TAB IS
TABLE OF A_OBJ
CREATE TYPE B_OBJ IS OBJECT (
B_NAME VARCHAR2 (100),
B_DESC VARCHAR2 (100)
CREATE TYPE B_TAB IS
TABLE OF B_OBJ
CREATE TYPE H_OBJ IS OBJECT (
A A_TAB,
B B_TAB
create type H_TAB is table of H_OBJ
-- Created the function to fill the data into my objects.
Create or Replace Function ABC RETURN H_TAB IS
     l_data H_TAB := H_TAB();
     v_loop_count BINARY_INTEGER := 1;
     obj1 A_TAB;
     obj2 B_TAB;
begin
     for i in(SELECT AG_PROD_MOD_NR, COMM_NM FROM BV_PRODUCT WHERE AG_PROD_MOD_NR = 'E4440A') loop
          obj1 := A_TAB();
          obj1.extend;
          obj1(obj1.last) := A_OBJ(i.AG_PROD_MOD_NR, i.COMM_NM);
          obj2 := B_TAB();
          obj2.extend;
          obj2(obj2.last) := B_OBJ(i.AG_PROD_MOD_NR, i.COMM_NM);
          l_data.extend;
          l_data(l_data.last) := H_OBJ(obj1,obj2);
     end loop;
     Return l_data ;
end;
-- used this SQL for fetching the data using the function -
select *
FROM the ( SELECT cast(ABC ()
as H_TAB) FROM dual )
the above SQL not gives me the data in the as a normal table returns, plz suggest me how to write SQL for above case.
Thanks in Advance,
Deepak

First try to move your obj1 and obj2 initialization outside of the for loop. Not sure if this is even the issue, but it can't be helping.
obj1 := A_TAB();
obj2 := B_TAB();
for i in(SELECT AG_PROD_MOD_NR, COMM_NM FROM BV_PRODUCT WHERE AG_PROD_MOD_NR = 'E4440A')
loop
obj1.extend;
obj1(obj1.last) := A_OBJ(i.AG_PROD_MOD_NR, i.COMM_NM);
obj2.extend;
obj2(obj2.last) := B_OBJ(i.AG_PROD_MOD_NR, i.COMM_NM);
l_data.extend;
l_data(l_data.last) := H_OBJ(obj1,obj2);
end loop;

How to populate data in TargetCube from SourceCube for a particular product/currency dimension selected in form1.

Hi,
Need help regarding Business rule scenario "How to populate data in "Target Form (plantype2)" from "Source Form(plantype1)" for a particular product/currency dimension combination selected in form1"
Scenario 1) : I have data for Product(Computer)/Currency(USD) dimension combination in Source Form
When i open Target Form and then select a Product(Computer)/Currency(USD) combination and then right click on form to invoke a Business rule to get data for this same product/currency combination from Source Form.
Scenario 2) : If there isnt any data in Source Form for product(Computer)/Currency(USD) combination, then the data for product(computer)/Currency(Default Currency) to be populated into Target Form.
The members in Currency Dimension (Shared Dimension) are USD & Default Currency.
Can anyone please help.
Thanks,
Rajkumar

Adding to what Celvin Kattookaran has said
You can either write a Business Rule / Calculation script with @XREF function and also you can check condition if there is data in USD then populate USD else "Default currency"
If you want that data in source to be available in target, then you can use @XWRITE in a rule from source cube to push the data to Target.
Amarnath
ORACLE | Essbase

How to populate data for 2LIS_40_REVAL, 2LIS_43_POSCAS and 2LIS_44_POSREC

Hi
How to populate data for 2LIS_40_REVAL, 2LIS_43_POSCAS and 2LIS_44_POSREC datasources at RSA3?
I'm very new to retail BI.
I think there is no setup tables for Retail infosources.
Any IDoc or BAPI activation is required or other procedure?
We are in BI-700 SAPKW70015 support pack R/3 side
and SAP_BW 700 Support pack SAPKW70016 &
BI_CONT 703 Support pack SAPKIBIIP9 BI side
Can anyone guide me how to load data?
Points assured
Thanks in advance
Ramana P

Dear Ramana,
There is no setup table for POSCAS and POSREC.This has to be popuated with a BADI Implementation.
As of PlugIns 2002_1_470 and 2002_2_470, POS data is update into BW the 2LIS_44_POSREC and 2LIS_43_POSCAS extractors using a BADI. To be able to update data into BW, the relevant implementation for the BADI must be activated in each case. You can activate the implementation in transaction SE19. The implementations are as follows:
POS_EX_REC_PI2003_1 for extractor 2LIS_44_POSREC
POS_EX_CAS_PI2003_1 for extractor 2LIS_44_POSCAS
Once the activation of BADI , create the back ground jobs for the 44 application and the data is pushed into Delta queue and it can be loaded into BI .
Hope this helps you.
Thanks,
Krishna Charan

How to upload data into form of Oracle EBS R12 using ATS ver 9.0

Hi experts,
Could you please guide me how to upload data into form on Oracle EBS R12 using Oracle Application Testing Suite verson 9.(The simpliest way)
For example: I need to create user account on Oracle EBS. Normally, I use Dataloader to upload the data, however it just can upload one by one record, cannot upload multi record at same time. Moreover if the performance of server is low, so I will get the issue when using dataloader.
Thanks in advance
Best Regards
Hieu

Hi you can create Virtual users to enter data. Note than you have to name the objects accordingly.
For Example default recording provided by Open script is ObjectNAME_(Index No of the object).
when you record one iteration the name of any object would be ObjectNAME_(0)
You can then create virtual users so the index will increment as the total number of Virtual users increases. Also you have to handle which row of your test data would get mapped to which Virtual user in the script run session.
Thanks

How to populate data into view object

Similar Messages

Maybe you are looking for