How to Post Idoc's from ECC to SCM

Dear Friends,
This is Shalini Shah.
how to post the Idoc(MATMAS05)
from ECC to SCM-APO.
please give me the details on this topic.
Regards,
ShaliniShah

Please see the Wiki page details mentioned in this [sticky|Wiki page for SCM-APO; thread at the beginning of the forum.
Refer to the [CIF|https://wiki.sdn.sap.com/wiki/display/SCM/CIF] Wiki page for details on setting up and using CIF. I am not aware of the IDOC details but if it material master (as SB has mentioned) then your best option of transferring the master data from ECC to SCM / APO will be to use the CIF.
After intial CIF settings are maintained (see details inthe CIF Wiki page) you will need to create Integration Models and activate them for transferring the data.
Somnath

Similar Messages

How to post idoc ORDERS05 from ABAP standalone program to the same R3 syst?

Hi Masterminds,
I need to post IDoc from ECC to same R/3 system. For that i need to develop a standalone program which will post Idoc 'ORDERS05'.
I had the following data:
E1EDKA1                         - PARTN
E1EDK02; QUALF = 001        - BELNR
E1EDP19; QUALF = 003     - IDTNR
E1EDP02; QUALF = 997        - BELNR
E1EDP01     MENGE               - Space
E1EDP02; QUALF = 999        - BELNR
E1EDK01     BSART               - Space
E1EDP19; QUALF = 002        - IDTNR
E1EDP01     ABGRU              - Space
E1EDKA1     PARVW              - Space
Please provide me details how to write the program and what necessary steps do i need to follow.
Thanks......

Hi,
Do ALE settings and Fill two tables of type EDIDD and structure of type EDIDC
and pass it to function module
CALL FUNCTION 'MASTER_IDOC_DISTRIBUTE'
    EXPORTING
      MASTER_IDOC_CONTROL                  = P_WA_EDIDC
OBJ_TYPE                                              = ''
CHNUM                                                   = ''
    TABLES
      COMMUNICATION_IDOC_CONTROL           = P_I_EDIDC
      MASTER_IDOC_DATA                                = P_I_EDIDD
   EXCEPTIONS
     ERROR_IN_IDOC_CONTROL                        = 1
     ERROR_WRITING_IDOC_STATUS               = 2
     ERROR_IN_IDOC_DATA                              = 3
     SENDING_LOGICAL_SYSTEM_UNKNOWN       = 4
     OTHERS                                                            = 5.

How to trigger IDOC'S from SAP

Hi All,
How to trigger IDOC's from SAP(ECC 6)..where can we check this in mii 11.5 weather it is fail/success
Thanks,
Abhi

You can trigger LOIPRO, LOIPLO and a few others manually from POIT (SAP Txn). Master Data related to orders can be triggered from POIM. Depending on which IDocs you which to generate, there are other transactions to trigger different IDocs.
You can also use Triggers from MII to generate IDocs in SAP using CLOI_DOWNLOAD_TRIGGER_MDAT (POIM equivalent) and CLOI_DOWNLOAD_TRIGGER_TRANS (POIT equivalent).
There is also a rather nice post which detailed the process of using change pointers to automate the IDoc generation and download, but I am having trouble finding it. Will continue to look and will post link when I find it.
Regards,
Mike
I couldn't find the post I was looking for, but there is an informative note 390635 which may help.
Edited by: Michael Appleby on May 5, 2009 1:29 PM

How can we replicate UOM from ECC to SRM.

Hi ,
In ECC I have assign ISO code against the UOM.
I have replicate ISO code from ECC to SRM. But unable replicate UOM.
How can we replicate UOM from ECC to SRM?
Thanks with regards
Sachin

Hi Sachin,
UOM are uploaded in SRM through object DNL_CUST_BASIS3. It's part of master data replication.
You should refer following link, it will give you idea how to load mentioned object in SRM:
MASTER DATA REPLICATION: SETTINGS
I hope it helps.
Regards,

By using middleware how data can be passed from ecc to crm?

By using middleware how data can be passed from ecc to crm?

Hello,
If middleware setup is done for the data exchange between ECC and CRM, then you can use customizing objects
(available in txn R3AC3) and business objects (available in txn R3AC1) , and condition/pricing related objects in available in txn R3AC5, which can be used for extracting data from R/3 to CRM. You can also find some upload objects for uploading the data
from CRM to R/3.
You can use transaction R3AS, to perform the initial load of customizing/Biz objects.
Once initial load is done, any delta changes would come automatically to CRM by means of delta load.
You also have request load, using which you can download range of materials/BPs which are missing or needs to be updated in CRM.
If you have any specific questions, let me know.
Hope this helps!
Best Regards,
Shanathala Kudva.

How to post idoc from r/3 to xi

hi experts i have one doubt abt posting idoc from r/3 to xi
how to post
for vendor master idoc
for sales order idoc
for purchase order idoc
for delivery idoc
is there any inbuilt posting prgms r there or we have to write the prms.
please clear me
regards
babu

to add more...
Befor posting IDOCS into XI..we need to do ALE SETTINGS...as fallows..
ALE settings.
SAP XI1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
SAP R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
In SLD System Landscape Directory
TS for R/3 (Logical system):-Assign the client name created in R/3 as Logical system Name.
Ts for Third Party (Logical system):-
BS for SAP R/3 (Logical system):- Assign the client name created in R/3 as Logical system Name.
BS for Third Party (Logical system):-Enter the XI logical system name.
In Transaction SALE
Define and Assign the logical system name.
and coming to the posting, u can go with WE19

Succesful IDOC acknowledgements from ECC

Dear MDM gurus,
What is the best way to handle acknowledgements from ECC (INTO MDM) for inbound IDOCS from MDM (MDM->XI->ECC).
We want it such that when an IDOC gets posted into ECC succesfully,it should send an acknowledgement signal back to MDM saying that IDOC was received properly.
Thanks.

HI Mugdha,
I have a concern on the Acknowledgement (ALEAUD) Idoc. I have implemented this scenario wherein DEBMAS IDoc is posted from MDM -PI - ECC and ECC sends back the acknowldgement using ALEAUD Idoc.
However, in PI (SXMB_MONI) there is no separate message entry created for this acknowledgment. The ALEAUD acknowldgement message details is attached to the original DEBMAS message which was triggered from MDM - PI - ECC. Due to this, PI interface created is not able to read the acknowledgement message and process it to post/dump the target file onto the MDM Port.
I tried triggering and ALEAUD Idoc manually using PI - RWB which generated a separate message for ALEAUD Idoc in sxmb_moni and then my target file was created in MDM (But this is just a manual way of testing the PI interface).
Can you advice on how this concern can be dealt with?
Thanks in advance,
Elizabeth.

How to post 100 records from R3 to file in XI

Hi,
Can any one explain me how to post 100 from R3 using RFC sender adapter to flat file.
thanks
dhanush.

hi
Follow this link it is helpfull to you.
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=howtopost100fromR3usingRFCsenderadaptertoflatfile&cat=sdn_all
IDOC/EDI/ALE
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e698aa90-0201-0010-7982-b498e02af76b
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/18dfe590-0201-0010-6b8b-d21dfa9929c9
Regards,
Santosh
Message was edited by:
Venkata Santosh Kumar Boddu

How to post null values from h:inputText?

Hello,
I have a form made of h:inputText fields that map to an entity class as the backing bean. Whenever I post the form from a web page, all the fields that I did not fill out and that are mapped to String fields in the entity class are set to "" (empty string) instead of null.
However, I would like to post null values to my entity, because that would indicate that the user did not fill out the field. In other contexts (outside of the web app) it is possible to set the fields to empty strings, but from the web app it should always be null. How can I get JSF to do this correctly?
Also, when reading entitys with null values from the database, these are converted to empty h:inputText fields, so this direction works as expected.
Ulrich

I haven't seen a solution for this as far.
This is how I do it:
public void action() {
    if (isEmpty(inputValue)) {
        // do your thing
    } else {
        // do your thing
public static boolean isEmpty(Object value) {
    if (value == null) {
        return true;
    if (value instanceof String && ((String) value).trim().length() == 0) {
        return true;
    if (value instanceof Collection && ((Collection) value).size() == 0) {
        return true;
    // And go so on .. make it an utility method.
    return false;
}

How to transfer Sales BOM from ECC to APO DP

Hi,
Demand planning require Sales BOM from ECC. Sales BOM in ECC will not have Routing & Work center, then how a PPM with Sales BOM can be transferred. If i have to create a dummy routing & WC for those sales BOM it will be tidious job to create all the master data. Is there any way to transfer the BOM alone from ECC to APO.
Please throw some light on it.
Thanks & Regards
Shan

Hi Somnath / Ritesh,
Are you sure about ciffing Sales BOM(usage 5)to APO as PDS ? Did you test it or your comments are based on SAP documentation?
I tried to CIF Sales BOM as SNP PDS, it is creating PDS with only parent item.Child items are missing.I have not used any production version here.
If i use production BOM(usage 1), it is creating PDS with both parent and child items.I have not used any production version here also.
SAP says BOMs can be ciffed to APO as PDS. No productions versions are required. but it has not mentioned about BOM's usage. May be , Is it by default production BOM?
One more question, Is it possible to create production version with BOM usage 5? It has no meaning right..
I think system does not allow you to create production version with BOM usage 5.
I also tried with BOM usage 2. In this case also it behaves like sales BOM.
looks like only production BOM can be ciffed with proper BOM structure in APO.
if required i can send you the link to share screen shots.
Pls comment..
regards,
Umamahesh

How to post goods receipts from intra company two step scenario.

Hi Guys,
Intra company scenario between two plants of same company code.
My process is as follow
1. Created STO
2. Created delivery doc through VL10B
3. Did the PGI
Once I post the PGI doc material status is goods in transit, from this stage I want to create goods receipts at receiving plant.
Can any one suggest how to create goods receipts from material in transit position....
Thanks and Regards
Chandra Sekhar Alokam

Dear Chandra Sekhar Alokam,
You can follow std process to do GR using MIGO wrt: Outbound delivery document created in VL10B.
in Intracompany STO-
Go through the SAP Help, -
[Cross-Company STO|http://help.sap.com/saphelp_47x200/helpdata/en/4d/2b90dc43ad11d189410000e829fbbd/frameset.htm]
Movement Type - 645 ( one step) & 643(two step)
Regards,
Reazuddin MD

How to create crystal reports from ecc abap program?

Hi all,
I am new to sap ecc to bo report!!
I heard that abap program cannot be directly connected to crystal reports,
So created a function module which is equivalent to the abap program!!
And happened to connect the same in crystal !!
Can anyone let me know how to proceed !!
will be there any performance issue ?
can anyone guide me how to do reporting from ecc function module to crystal reports directly?
Thanks

Hi Pooja,
From what I know, not all ABAP programs can be accessed in Crystal Reports. The program should return rows and columns, otherwise, CR would not be able to report off it.
I'm not sure if there are any performance issues if we follow your path. Do you experience any?
And, do you need help in creating a report on the function module, I mean do you also have any design related queries?
-Abhilash

IDOC Exceptions from ECC to email

Hi
I've been reading the SAP help on IDOC exception handling as I want all EDI IDOC errors in SAP ECC to be sent to a "user" as an email.    (I know this is not exacly an SAP PI question but thought I ask).
Any step by step guides out there ?

Hi
You can try the same by writing a function module.
The function module will reads the error message from ECC and then sends the email by calling another function module
the sample function module for email sending will look like this
CALL FUNCTION 'ZTEST_SEND_EMAIL'
      EXPORTING
        extcheck            = ''
        subject_long        = subject
        priority            = '5'
        bin_attachment_name = 'Failed error message'
        bin_attachment_type = 'BIN'
      TABLES
        it_content          = it_content
        it_bin_attachment   = it_attachx
        it_recipients       = it_recips.
The recipient needs to be crated using TCODE   SO23.

How to generate CCMS report from ECC system

Hi,
I have implemented CCMS between my SAP ECC system 6.0 and SAP SRM7.0. How can i generate CCMS report for my SRM system from ECC system. Can any one please tell me the steps to configure CCMS between my ECC (CEN) system and SRM 7.0 ABAP system.
Regards,
Pradeep J

Pradip_jag12 wrote:
> I have implemented CCMS between my SAP ECC system 6.0 and SAP SRM7.0.
>Can any one please tell me the steps to configure CCMS between my ECC (CEN) system and SRM 7.0 ABAP system.
Hi,
Contradicting statements.
However check the link for CCMS Configuration:
http://www.sdn.sap.com/irj/sdn/index?rid=/webcontent/uuid/30237989-0901-0010-70a4-944691eb5e52 [original link is broken]
Ideally the CEN system should be a double stack i.e. best if its a solution manager.
Regards,
Srikishan

How to restrict contact person from ECC to CRM

Dear All,
We need customers to flow from ECC to CRM, but not Contact persons.
Seems that the 2 adapters CUSTOMER_MAIN & CUSTOMER_REL have to have the same filter settings.
How do we achieve this?
Please help!!
Best regards,
Rohit L.

Hi Rohit,
In CRM table CRMC_BUT_CALL_FU you can add any function module you need to filter data as per your requirement... Have a look to this OSS note that will show you the trick:
Note 638628 - No contact person upload into R/3: Example for exit users
Regards,
Nicolas
PS: this OSS note is even better:
Note 774662 - Enhancement of the business partner data exchanges
Edited by: Nicolas BUSSON on Jun 4, 2009 10:13 AM

How to Post Idoc's from ECC to SCM

Similar Messages

Maybe you are looking for