How to prevent from creating multiple deliveries per sales order

Hi,
Appreciate your help on the below.,
I do not want the users to create multiple deliveries for a single sales order. They should only be allowed to create one delivery and it can either be a full delivery or a partial delivery.
Is there any possibility in configuration to do this? I checked the customer master configuration, but it is only for sales order line item.. I only need one delivery for the entire order, regardless of whether it included all line items or not.
If the user tries to create a second delivery for the same order, it should ideally give an error message and stop the system from creating the second delivery
Appreciate your help.
Thank you.
Keshini

Thanks Marian for your feedback.
I tried this again, however it still works only at item level.
Say i have a sales order, with 2 line items with 50 each.
Say i create an delivery for only the first line item for 20, delivery gets created.. It doesnt allow to create the delivery for rest of the 30 on that line item,
However if i try to create a delivery for the second line item, it allows and the delivery gets created.
I only want one single delivery for the entire order.
Thanks,
Keshini

Similar Messages

How can prevent duplication of condition types in sales order??

How can prevent duplication of condition types in sales order.
While we want Amount field Changeable by user.
Please give me solution.

Dear Rohit,
Can you explain your scenario in detail with an example or any screen shot so that we will help you in easy way ...
Regards,
C.B Reddy

How to find the total no of Deliveries per sales order?

Hi,
I am writing a custom development specification.
Is there a SAP table/field by which I can know the total number of deliveries created for a single sales order ?
For example, if a Sales order is created for quantity 10 and we have two delivers ( each of 5) ..is there a field I can get that information from?
--Sidd

Thanks for the reply.
I am not sure if VBFA will work...I would like the program to look into all deliveries for a sales order and make a distinction between the first one & the rest.
For example, if the sales order has 5 deliveries associated with it.
I would like to run a specific logic for the first delivery & a different logic for the rest of the deliveries.
Is there a way to tell the system ...to distinguish between the different deliveries ?
-Sidd
Edited by: sbhattacharya99 on Apr 15, 2010 11:50 PM

How to prevent changes to SOLD TO in sales order

Hi,
Can someone remind how to stop users from changinf the address of the SOLD TO in a sales order?
We allow users to change the SHIP TO address but sometimes they select the wrong partner and update the SOLD TO and then the delivery is made to the wrong address.
Thanks

Hi Javaid,
You can achieve this by role base access control, please ask your BASIS guy to create role as per your requirement and assign to user profile so that user will not be allowed to any such changes.
Cheers !!!
Imzo

How to Prevent the confirmation of quantity in Sales Order

Hi All,
I want to make sure that if the quantity in a line item for certain customers exceeds certain threshold quantity the quantity does not get confirmed and we set up a delivery block on the entire order.
I know how we can setup the delivery block. Could someone tell me, if we can programmatically ensure that quantity is not confirmed for that particular item. Is there a standard SAP way (function module/BAPI etc) of doing it? Or do I need to find and update the table.

Hello krishna,
You need to delete the confirmed schedule line programatically in the user exit.
Delete the corresponding entry in the internal table xvbep. You need to do this in a appropriate user exits in the include mv45afzz.
I guess you can also do this in atp function module user exit.
Hope this helps you..
Regards,
Jiten

How to prevent from starting oracle server every time i start windows?

I have winXP professinonal, and i would like to know how to prevent from starting oracle server every time i start windows. Because it really slows starting the windows. Thanks

The scripts above seems to work as intended with no errors and do indeed stop my five XE services. I created the second script to start them and they do indeed start and are listed as "Started" in the Services panel aferwards.
My XE installation has the 5 services set up to start automatically.
I was happy to find the script above because I did not know the starting order and using the XE shortcuts for "Stop Database" and "Start Database" just seemed to cause sqlplus to receive ORA-12514 "listener does not currently know of service..." after trying to use them to restart the database. Using the scripts above seems to leave me with a different error.
I am pretty sure I eliminated my 9i listener and it is no longer listed in my Services panel or the registry.
Restarting the laptop does start the services correctly, and now I am on to a more pressing JDBC error, so if I get a chance to use the script again, I will post my results. Thanks.

Split the delivery or create multiple deliveries

Hi team,
Sale order stock is grater than Truck capacity.
We need a solution to either split the delivery; or create multiple deliveries at the time of delivery creation.
Manually we are doing calculations for pallets capacity and then doing loading still some quantity pending or some space pending
Is there any program that can split delivery via Sales order and create Outbound delivery through pallatization..
Any such scenarios you have please suggest.?
Thanks in Advance
SAP MM

Hi,
Normally we can split the deliveries based on the following criteria
1. Different delivery dates for line items.
2. Different ship to parties for line items.
3. Different routes for line items.
But in your above case the issue is regarding truck capacity for which the system doesn't have any information. So you can manually create a new delivery by adjusting the existing one or if you feel the issue is going to repeat for different items in future also then you can go build a custom logic in the system to address the delivery split using a user exit.
Thanks,

Create multiple deliveries against the same customer return order

I want to create multiple deliveries against the same Customer return order. But once the RF transaction is run it closes all the lines. We need to be able to receive multiple times against the same RA number and create different deliveries. Any ideas?
Will reward points to any helpful answers

are the deliveries being created by RF monitor ?
Or only picking is happening by RF?

Multiple PO's per sales order - need mutilple deliveries

Hi Guru's,
In one of our requirements, we club multiple po's into a sales order. The question now is do we have one delivery document per sales order? I need to have delivery document per PO. This requirement is need for sending one ASN per PO to some of our customers. Can this be done through configuration. Please give me detailed steps.
Thanks,
Kumar.

Dear Kumar,
I think in SAP default it wont possible.
please check any user exits avilble in that scenarios if not you have to develop your own tab to add beside like po from no to to number or from date to to date
This is the functions availble in requirement
Hope this helps you
Prem

Why does Scheduling Agreements create multiple deliveries?

Hello SAP Experts,
We are on 4.7c. Our scheduling agreements automatically create deliveries; and I was wondering why instead of putting the scheduled lines onto one delivery, it automatically creates multiple deliveries for the scheduling agreements.
Could someone please explain this to me? Thank you for your time.
Best Regards,
WC

Hello,
Thank you for response. I checked the settings and they are correct.
In addition, I checked to make sure the Scheduling Agreement Header Details had the "Order Combination" box checked, which will allow multiple scheduling agreements to be combined in one delivery.
Our scheduling agreement runs on the weekends where it automatically creates the deliveries for them.
My question is why do the scheduling agreements with the "Order Combination" box checked do not always put the scheduling agreements into one delivery. but separates them, when they are in the same automated run.
For example:
Scheduling Agreement 0001 through 0045 will be created on Delivery 100001, but Scheduling Agreements 0046 though 0048 will be created on Delivery 100002...and they both have the order combination selected.
Why is Scheduling Agreements 0046 through 0048, not automatically creating on Delivery 100001 as the other scheduling agreements?
Thank you for your time!
Best regards,
WC

Why do Scheduling Agreements create multiple deliveries?

Hello SAP Experts,
We are on 4.7c. Our scheduling agreements automatically create deliveries; and I was wondering why instead of putting the scheduled lines onto one delivery, it automatically creates multiple deliveries for the scheduling agreements.
Could someone please explain this to me? Thank you for your time.
Best Regards,
WC

Hello,
Thank you for response. I checked the settings and they are correct.
In addition, I checked to make sure the Scheduling Agreement Header Details had the "Order Combination" box checked, which will allow multiple scheduling agreements to be combined in one delivery.
Our scheduling agreement runs on the weekends where it automatically creates the deliveries for them.
My question is why do the scheduling agreements with the "Order Combination" box checked do not always put the scheduling agreements into one delivery. but separates them, when they are in the same automated run.
For example:
Scheduling Agreement 0001 through 0045 will be created on Delivery 100001, but Scheduling Agreements 0046 though 0048 will be created on Delivery 100002...and they both have the order combination selected.
Why is Scheduling Agreements 0046 through 0048, not automatically creating on Delivery 100001 as the other scheduling agreements?
Thank you for your time!
Best regards,
WC

How to restrict the user from making any changes in Sales order- item level

Hi to all
How to restrict the users from making any changes in sales order at item level if the same sales order is released by senior user through status profile.
Regards
Anish Parikh
Edited by: anish parikh on Jan 24, 2008 5:16 AM

Hi Anish,
This can be achieved through the roles and authorization.
This can be done through the basis team. they can create user profiles and roles.
For the roles they assign some transaction codes so that they can view the only assigned tr. codes.
Like that ur requirement can be done.
Also u can prevent the user to change any fields in the sales order screen (VA02). for that please modify the authorisations.
Hope i answers.
Reward points if useful.
Edited by: kaleeswaran bhoopathy on Jan 24, 2008 9:57 AM

How to get COUNT of Invoice No and Sales Order No from Multiprovider

Hello Guys,
I have a scenario like below. I have 2 info cubes (1) Billing Item Info cube (2) Sales Order Item Infocube which stores Item level data in infocube. I created Multiprovider for these Sales Order Item Cube and Billing Item Info cube.
Now in My Multiprovider, Invoice No and Sales Order No gets repeated no of times because one Invoice and One order will have no of Materials. I have a requirement to count Total No of Billing Document and Total No of Sales Document for a Day in the BEx Report. I was thinking to use COUNT function but if Sales Document or Billing Document gets repeated then it will count those records which i don't want. correct me if i am wrong.
How to get Total no of Billing Document and Total no of Sales Document from a Multiprovider where i have Item level data is stored ?
Regards,
Komik Shah
Edited by: Komik Shah on Aug 20, 2011 5:33 PM

Hi,
Count can be achieved as per the following document. Create for Billing Doc and Sales Doc separately.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/009819ab-c96e-2910-bbb2-c85f7bdec04a
Regards,
Suman

Seggragating Deliveries created for STO and Sales Order

Hi Friends,
I have a requirement..
I am looking for list of deliveries in LIPS table. But I find that this table lists all deliveries created for STOs as well as Sales order. My requirement is to select only those deliveries which are created for Sales orders. Can anybody tell me how to seggragate the deliveries for sales order from deliveries created for STOs? Any other table should I look for deliveries created only for sales order?
Please suggest.
Thanks & Regards
Satya

Hi Satya,
If you need table level data then you can go with method suggested by Andy Slania or if you have access to SQVI, you can join VBFA and LIKP tables and decide on your choice of search and list display. You can save the query for future use.
-Naminator

Is there a way to create a Quote or Sales Order from a a Service Call?

Hi Forum,
Is there a way to automatically create a Quote or Sales Order from a a Service Call?
Regards,
Manuel Roman

Hi Manuel Roman,
Service Call is mainly used for after sale support. If you want to have Sales Quote or Order created automatically, you need Sales Opportunity model.
Thanks,
Gordon

How to prevent from creating multiple deliveries per sales order

Similar Messages

Maybe you are looking for