How to Print 25page standard text in Adobe form

Hi Form Gurus.
My requirement is to print a 25 pages form of standard text. Can any one please help me.
Thanks in advance.
Regards
ASAHA1
Moderator message: please work yourself first on your requirement, post specific problems later if necessary, always search for information before asking
locked by: Thomas Zloch on Aug 31, 2010 9:11 AM

hi,
You can create a text module like you do for Smartforms and then you can add that in the interface and drag n drop it in the layout.
regards,
Sakshi

Similar Messages

  • Standard Text IN ADOBE Forms

    Hi,
    Can you tell me how to use standard text in ADOBE forms,
    and how to fetch A Customs Tariff Number or an HTS (Harmonized Tariff System)
    from other system.

    Hi Oliver,
    I believe you standard text is a table type of TDLINES.
    On the form you would display it with a table of 1 column 1 row with repeat row ticked.
    Have the like below code on the fomr ready event of your table.
    for(var i =0; i<this.Row1.nodes.length;i++)
         if(i == 1){
         this.Row1.Cell1.font.fill.color.value = "255,0,0";
         this.Row1.xx.font.fill.color.value = "255,0,0";
    Note: in my example I had a table with one row names Row1 and 2 fields cell1 type textbox,  & xx as text / label.
    If its like you have it in a text box with multiple entries, we need to spli the value such that 1st row is displayed in a text box whose parameters are by defeult set to font red, and rest of them to this text area.
    If your procedure is table the code sud work, else let me know how you get data and how do you display it on the screen.
    Cheers,
    Sai

  • Can I color a line of "standard text" in adobe forms output?

    Simple question: Can I color a line of "standard text" in adobe forms output?
    My standard text (SO10) has multiple lines. 
    Can I make one of the lines red?
    Ollie

    Hi Oliver,
    I believe you standard text is a table type of TDLINES.
    On the form you would display it with a table of 1 column 1 row with repeat row ticked.
    Have the like below code on the fomr ready event of your table.
    for(var i =0; i<this.Row1.nodes.length;i++)
         if(i == 1){
         this.Row1.Cell1.font.fill.color.value = "255,0,0";
         this.Row1.xx.font.fill.color.value = "255,0,0";
    Note: in my example I had a table with one row names Row1 and 2 fields cell1 type textbox,  & xx as text / label.
    If its like you have it in a text box with multiple entries, we need to spli the value such that 1st row is displayed in a text box whose parameters are by defeult set to font red, and rest of them to this text area.
    If your procedure is table the code sud work, else let me know how you get data and how do you display it on the screen.
    Cheers,
    Sai

  • How to print a standard text of 3 pages in the script output?

    Hi all,
    I want to print a standard text as an include in the script output.
    But the standrad text is of 3 pages conataining continuous (some terms and condtitions) text.
    But while executing driver program, I am getting a STOP messgae pop-up saying 'Output is continuous or contains too many pages (>4)'.
    How to get the standard text of 3 pages in the output. The standard text is to be printed at the bottom of the output.
    Thanks,
    Sachin

    Hi ,
    To display standard texts you have to create a include in your script below is the syntax for that:
    INCLUDE name OBJECT name ID name PARAGRAPH name LANGUAGE   name
    Include command is used to include standard text in a form.the text 
    should be already defined by using transaction SO10.
    Here name is the name of text
    ID is used to classify text e.g. SDVD (SD related text) , ST (Standard text)
    OBJECT is used to specify type of object it an be TEXT , DOKU
    LANGUAGE is used to specify language like EN ,if ommited than logon
      language is used
    PARAGRAPH is used to specify the paragraph like C
    e.g. /:INCLUDE mytext OBJECT TEXT ID ST LANGUAGE EN
             Here the standard text created in SO10 with name mytext is
             included in the form in language EN (English)
    Please let me know if you have still any confusion.
    Thanks
    Narendra Vikram Vishwakarma

  • Standard texts in Adobe Forms ??

    Hello,
    I know how to work with standard texts (SO10) in SAPscript and Smart Forms but not with Adobe Forms. Can someone explain ??
    Thanks !!

    Hi,
    you can do it in context of the form. Just go to context and create text and in properties node u can make it include text .
    Atul

  • Standard text in Adobe form

    hi all,
            I would like to know how to add standard text (from SO10) in adobe form?
    Regards,
    Vinod.

    Creating a Text node by right clicking on the top node in the Context Tab of the Form and then
    CREATE -> TEXT.
    In the properties of the TEXT node select Text type Include Text and then provide the Text Name, Text Object, Text ID and Text Language values

  • Standard text and Adobe forms

    How do you get a standard text created w/ SO10 displayed on the PDF? Can it also have the same formatting... bold, underline, etc.?
    Currently on ecc 7.0.

    This is where some training may be helpful....
    I now have the context tab in SFP by changing the interface type on the interface attached to the form to be dictionary based. This allows me to add the text as you mentioned. The form has ZCI layout assigned.
    But now my webdynpro is having issues calling the form. In my webdynpro my template source is the same as the sfp form name; but as I assign the pdfsource and datasource they are either removed and/or changed to a dummy value that is added to my context with no nodes or attributes.
    This application currently runs in a production environment. All I was trying to do was add a standard text element to the form.

  • How to print and input text in Adobe Edge

    Hi everybody!
    I have an input and I need to create a button that when pressed, send to print the text the user typed in the input.
    Any idea how to do that?
    thank you very much

    Saw this about printing:
    If you need to print an specific content, you can hide the rest (and format the printed area) by CSS:
    <style media="screen"> .noPrint{ display: block; } .yesPrint{ display: block !important; } </style> <style media="print"> .noPrint{ display: none; } .yesPrint{ display: block !important; } </style>
    As you can see, by setting the media attribute of your style tag, you can set up styles for both the normal view (screen) and the printing view (print). Full article is here.

  • How to call Subroutines,Standard Text  & using Internal Table in SmartForm

    Hi all,
    need help in the following areas.Its very urgent!
    1.How to CAll Subroutines in Smart Forms
    2.How to CAll Standard Text in Smart Forms
    Situation:
    We have an Internal Table T_SALES with all the data which am going to display in the smartform,How to retrive data from an internal table in Smart forms
    Any Help in this direction would be highly appreciated.
    Regards
    Ramu

    Hi,
      When you are using quantity or currency fields, you have to mentiong the reference fileds in a tab called CURRENCY/QUANTITY FILEDS in the GLOBAL DATA node.
    Specifying a Currency or Quantity Reference
    Use
    In the ABAP Dictionary, you can assign a currency or quantity field to a table field. In the output of these fields, the system can then insert the relevant currency or unit:
    ·        If the value field is in the same table as the corresponding currency or quantity field, the system recognizes the reference automatically, and formats the value field according to the currency or unit in the assigned field.
    ·        If the value field is in a different table from the currency or quantity field, the system cannot recognize this reference automatically.
    In the second case, you must indicate this reference to the system in the form, to ensure that the value field is formatted correctly.
    Procedure
    You want to assign a currency or quantity field in one table (for example, CURTAB) to a value field in another table (for example, VALTAB).
           1.      Create the reference to the currency field by entering the following values:
    -         Field Name: VALTAB-VALUE, if this is the value field of VALTAB that you want to display.
    -         Reference Field: CURTAB-CURRENCY, which is the currency field of CURTAB.
           2.      Under Data Type, specify whether the data type is a currency or quantity.
    Result
    In the output of the PDF-based print form, the system formats the value field VALTAB-VALUE according to the assigned value in the currency or quantity field of the global variable CURTAB-CURRENCY.
    Thanks and Regards,
    Bharat Kumar Reddy.V
    Message was Added by: Bharat Reddy V
    Message was Added by: Bharat Reddy V

  • How to define & read Standard Text in SAPScript? Urgent Please

    Hi Experts,
    How to define & read Standard Text in SAPScript? Urgent Please..
    Thanks in advance
    good answer will points gud marks.
    sekhar

    Hi
    U can't define a standard text in a SAPScript, you call call it only by statament INCLUDE
    /: INCLUDE <ST TEXT NAME> OBJECT TEXT ID ST LANGUAGE <LANGUAGE>
    U can define it by trx SO10.
    If you need to know the text without to print it, you need to use a routine where u can use the fm READ_TEXT in order to find out the text.
    Max
    Message was edited by:
            max bianchi

  • How to get the standard texts available in a smartforms

    Hi Experts,
        How can we find out the standard texts that are exist in a particular smartform . is there any table/function module available to get those standard texts? I am finding the table STXFTXT, from that I am getting only textline. But I need the standard text names that are used in a smartform.
    Thanks & Regards,
    Suresh

    hi,
    1,Use SO10 Tcode to write standard text in Smartform.
    2.For long text
    method1
    Create TEXT node- general attributes change text type to include text
    then you can input text name/text object/text id/language
    method2
    create PROGRAM LINE node - use FM READ_TEXT to read it to a internal table
    then use LOOP or TABLE node to display it
    For TEXT module(For foreign language)
    Tr-code:smartforms -- choose Text module(not choose form)--create a text module object
    then enter smartform Create TEXT node- general attributes change text type to text module
    input the text module name which created by above
    3.
    1. take function module name of the smartform.
    2. goto se37 and type that fm name.
    3. goto attributes tab
    4. double click on either program or include .
    5. There u can find all the subroutines used inside smartform.
    6. search for "perform %move using %textkey-name".
    4.Standard Texts are created in SO10 Tcode and stored in STXH table with OBject ,ID and NAME parameters. We can use Read_Text FM to read the text.
    check the tables STXH & STXL.
    5.
    How to CAll Standard Text in Smart Forms
    In SFs you can insert the standard tests using the TEXT node. Create a TEXT NODE. Then in the GENERAL ATTRIBUTES of this TEXT node select INCLUDE TEXT in the TYPE option. Then you have to enter the text name, object , ID and language in the provided fields. Then if you dont want any error if there is no text in the corresponding text then CHECK the check box "No errors if no text available.

  • Regarding printing of standard text in scripts

    Hi every one,
       I am  Dinakar. I had a situation where i am printing the standard text for
       Terms & Conditions.
       my page is able to print only 15 terms pr page.
       but my problem is that few line from the last (15th) terms & condition r missing
       in the first page. from 16th terms & conditions r printing properly.but again from third page remaining terms and conditions r completely missing.
    please help to complete this situation.
    Thanks & Regards
    Dinakar.

    Hi Dinakar,
    Try to keep the statments you want to display in a single page use <i>PROTECT</i> and <i>ENDPROTECT</i>.
    /:  PROTECT
    p1 standard text1
    p2  standard text2
    p13: standard text15
    /: ENDPROTECT
    Thanks,
    Sreekanth
    <i>*-- do not forget to reward if it helps you ;)</i>

  • How to attach a standard text to a Transport request?

    Dear all,
    Please let me know, How to attach a standard text(created in tcode SO10) to a Transport request?
    Thanks in advance.

    Hellö,
    Run the report RSTXTRANS and give the standard text name and execute. A popup will be dispalyed which asks for the TR
    Regards,
    Vasanth

  • How do you undo highlighted text in adobe for iPad?

    How do you undo highlighted text in adobe for iPad?

    Touch and hold the highlight that you added until the menu pops up and select "Clear".

  • How to change the Field Symbol, so Adobe Forms takes it as a Table?

    Hi guys,
    I created an Field Symbol, in a Interface which I use for Adobe Forms. The type of the Field Symbol is STANDARD TABLE, and this field symbol I fill with data from another program.
    But the problem is that in adobe forms, this Field Symbol is taken as TEXT FIELD and not as Table... and this shows me a Dump because it can't convert Internal Table to type C (the dump is like that).
    What I need, is how to change the Field Symbol, so Adobe Forms takes it as a Table?
    I looked at Adobe Form, and found this:
    The Type Category of the Field Symbol is DICTIONARY TYPE and I think I need to change it to Internal Table as shown in the right picture.
    Does someone have any idea?

    Hello Taly,
    To what i understand your requirement, you need to pass data from Field symbol to internal table in Adobe form.
    You have done it correct partially. I have replicated your scenario and steps are below -
    1) Create a Z structure
    2) Create Z Table Type
    3) Create Adobe Interface with Table & Field Symbol. Also do coding as shown to assign the internal table populated in driver program to filed symbol.
    4) Design Form as -
    5) Code driver as -
    *& Report  ZR_AF_FS_1
    REPORT  zr_af_fs_1.
    DATA: fm_name           TYPE rs38l_fnam,
           fp_docparams      TYPE sfpdocparams,
           fp_outputparams   TYPE sfpoutputparams,
           it_kna1           TYPE ztt_fs_1.
    * Sets the output parameters and opens the spool job
    CALL FUNCTION 'FP_JOB_OPEN'                   "& Form Processing: Call Form
       CHANGING
         ie_outputparams = fp_outputparams
       EXCEPTIONS
         cancel          = 1
         usage_error     = 2
         system_error    = 3
         internal_error  = 4
         OTHERS          = 5.
    IF sy-subrc <> 0.
    *            <error handling>
    ENDIF.
    *&---- Get the name of the generated function module
    CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'           "& Form Processing Generation
       EXPORTING
         i_name     = 'ZAF_FS_1'
       IMPORTING
         e_funcname = fm_name.
    IF sy-subrc <> 0.
    *  <error handling>
    ENDIF.
    *-- Fetch the Data and store it in the Internal Table
    SELECT kunnr name1 name2 adrnr FROM kna1 INTO TABLE it_kna1 UP TO 15 ROWS.
    * Language and country setting (here US as an example)
    fp_docparams-langu   = 'E'.
    fp_docparams-country = 'US'.
    *&--- Call the generated function module
    CALL FUNCTION fm_name
       EXPORTING
         /1bcdwb/docparams        = fp_docparams
          it_data                   = it_kna1
    *    IMPORTING
    *     /1BCDWB/FORMOUTPUT       =
       EXCEPTIONS
         usage_error           = 1
         system_error          = 2
         internal_error           = 3.
    IF sy-subrc <> 0.
    *  <error handling>
    ENDIF.
    *&---- Close the spool job
    CALL FUNCTION 'FP_JOB_CLOSE'
    *    IMPORTING
    *     E_RESULT             =
       EXCEPTIONS
         usage_error           = 1
         system_error          = 2
         internal_error        = 3
         OTHERS               = 4.
    IF sy-subrc <> 0.
    *            <error handling>
    ENDIF.
    6) Output -
    BR.

Maybe you are looking for