How to Print 4-Pg Newsletter on 11x17 using EPSON WF7510

I am having difficulty printing a 4 page newsletter in .pdf format on the Epson Work Force 7510 printer.  You would think it would be simple to print four 8.5x11 sheets 2-up on 2-sided 11x17 paper, but I am finding it impossible. I spend 2 hours on the phone with EPSON only for them to tell me it's the application's problem not theirs.  So here I am....
Currently, i am able to print 2-up, 2-sided on 11x17, but the 8.5x11 pages shrink to 6.5x9 with margins on the outside rim of the 11x17, no margin between the 2 pages.  I do not want the 8.5x11 to shrink, i want the documents to print actual size.  My only solution now is to feed the same 11x17 sheet 4 times printing each page one-at-a-time, hoping I don't mess up on the orientation of the paper.  "Cut me Mick!".
Anyone that can help, please reply.  Thank you!!!

Okay.  I believe I've solved the problem!  (as I hear Rocky theme song playing in my head)
I clicked on Page Setup... and selected 11x17 Paper Size and Source of Paper Cassette and voila, the white margins disappeared and my 8.5x11 sheets were full size!

Similar Messages

  • How to print a 4.25x5.5 Booklet using 8.5X11 paper

    I would like to be able to print a booklet, each page size 4.25x5.5 (of a quarter of a 8.5x11 sheet of paper).  There should be 8 pages per page (i.e double sided printing) and the pages should be organized so that the sheets can be folded resulting in a booklet that can be stapled in the middle, on the seam.  I could not get ID to do this; the closest I got was 4 pages per sheets meaning half of the sheet was blank.  Any suggestions.

    How were you setting up the print? I would think that Using Print Booklet and setting it to 4-up perfect bound would do what you want, but you would need to set the signature size to the number of pages in the booklet.
    You can also create a new file 4.25 x 11 or 5.5 x 8.5 depending on the orientation, then use Scott Zanelli's script (InDesignSecrets » Blog Archive » Zanelli Releases MultiPageImporter for Importing both PDF and INDD Files) to place the pages from the original file twice so you have two copies of the booklet stacked together. Then run Print Booklet with 2-up Saddle Stitch and cut them apart.

  • How do I print an email off my ipad using Epson iprint so it does not show the preview box as well as the email?

    How do I print an actual email only from my ipad using Epson iprint without the split preview box also showing?

    No, tried that and whilst it closes the split screen when in the email app itself it still shows on the
    Epson iprint screen and email when printed off.

  • How to print a document in reverse order using Java Print API ?

    I need to print a document in reverse order using Java Print API (*Reverse Order Printing*)
    Does Java Print API supports reverse order printing ?
    Thnks.,

    deepak_c3 wrote:
    Thanks for the info.,
    where should the page number n-1-i be returned ?
    Which method implementation of Pageable interface should return the page number ?w.r.t. your first question: don't return that number but return page n-1-i when page i is requested; your document will be printed in reverse order. Your class should implement the entire interface and wrap the original Pageable. (for that number n your class can consult the wrapped interface; read the API for the Pageable interface).
    kind regards,
    Jos

  • Need help in how to print new line character in unix using java

    Hi All,
    I use the printstream class to print some line in a text using java.
    here is the code:
       FileOutputStream out; // declare a file output object
            PrintStream p; // declare a print stream object
                    p.print("\t");
                    p.print(date);
                    p.print("\t\t");
                    p.print(RecCount);
                    p.println("\n");when i use this and output of this character in windows is
    date RecCount
    22-07-2007 23456
    when i use the same code in unix it shows the following output:
    date RecCount[]22-07-2007
    it wont accept the new line character could any one give me an idea to solve this problem.

    PrintStream has a println() method. Use that. Or System.getProperty("line.separator").
    Because a newline char doesn't necessarily specify a line break. It's system-dependent.

  • How to print Warranty (Duration) on Delivery Note using PLD

    Hi,
    How can I print Warranty (No. of Months) on Delivery Note using PLD. Warranty is already defined in a service template which is assigned to Item Master record.
    when i try to print "duration" from OCTT is shows all the duration values set in all service templates with the combination of all the items in the delivery note. Please help me. I am working on SAP B1 2007 A PL47.

    Hi
    Its Very Easy just Follow the Steps:
    Create One DB field in Repetative area0 - Table -octt(contract Temp) Column- Duration(Duration of Coverage)
    Check the Item code Field or Item description field for EX( F_123), then in Duration DB field - Go to Properties -Field in that - General - Lint to - connect the  ( F_123), code Field or Item description field for EX( F_123),
    So it will show automatically Duration of the Item which was connected in master data.
    It works perfectly in 2007B PL 10.
    If issue Resolved pls close the thread
    Giri

  • How do print from photoshop CS3  to my new epson XP520 printer? The photos are now far too dark: never had this problem with any other printers?

    Help please.  I have a new Epson XP 520 printer and do not know how to set the CS3 print to get good results as my printed photos are now far too dark.  Never had any problems with previous printers and despite changing settings have been unable to resolve.

    System info? Exact print settings? Color management?
    Mylenium

  • How to print from LR 5.2 with an Epson xp-810 printer

    how do I switch off the XP-810 printer driver if I want LR5 to control the printing. Just selecting the Epson profile (premium glossy paper) into print / print job / color management / profile of LR5 gives very ugly results

    You said HP in your post title and Epson in your body text, but I think it is actually an Epson Artisan 810.
    If that's right, then the free Epson iPrint app should work for you - it lists your printer as one that it supports: http://itunes.apple.com/us/app/epson-iprint/id326876192?mt=8

  • How to print text/data in flex 3 using printer???Plz help...

       Hi,
              plz tell me the way to print text/data using printer in flex.  I tried the FlexPrintJob class. but it takes object of a container to be printed & prints the visible content of that container(along with scrollbars), bt i want to print all contents of the container(including invisible).
          I have tried to print bitmap image through FlexPrintJob but it takes lot of time for spooling... So plz help me out in printing(fast with all content) in flash
    I am using flex 3 (flex Builder 3 IDE).
      Thanks in advance!!!

    Hi Sagar,
    Don't worry You can use the below work around to print all the contents of the Container including the invisible contents under scrolll with out scroll bar..
    So what the idea here is we are seeting the container height to full size with out scrolls before sending the container object to printer and as soon as you print the object you are restoring it to the original height with scrolls...so that you can print the full contents without scrolls...
    You may have doubt that by chnaging and restoring the size the user may see momentary resize of the container but it is not so as it is a fraction of a second and user cannot notice this change... Give it a try ..I had already run into this problem recently and I have found a work around for this which is as below:
    // Here mainContainer is the container or box id the contents of which you want to print
       private function doPrintContainer():void
        var printJob:FlexPrintJob = new FlexPrintJob();
        if(printJob.start() != true) return;
        try
         var mainContainerHeight:int = mainContainer.height;
         //Increasing the height of the desired component to be printed.
         mainContainer.height = mainContainer.measuredMinHeight;
         mainContainer.verticalScrollPolicy = "off";
         //Adding the resized Component to our FlexPrintjob and then sending the print request
         printJob.addObject(this,FlexPrintJobScaleType.MATCH_WIDTH);    
         printJob.send();
         //Resizing the component back to normal size
         mainContainer.height = mainContainerHeight;
         mainContainer.verticalScrollPolicy = "auto";    
        catch(error:Error)
                     trace("Error : " + error.message);
    If this post answers your question or helps, please kindly mark it as such.
    Thanks,
    Bhasker Chari

  • How to print a table in OA Framework using Jdeveloper?

    I am using JDeveloper for OA Framework, in my page i want to print a table thorugh Print button.
    Please give me some suggestion/methods to do this...

    Bhupendra,
    In ur requirement, you would have to go with a dynamic table creation in process request.Attach submit action event to message check box, in the action event code redirect to same page.
    In process request, you would have to recreate this table, with additional rows, as per your requirement.
    --Mukul                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • How to print a signature in Adobe form using PCL - HELP!

    Hello,
    I'm using Adobe LiveCycle and I'm trying to get my form to print a signature at the bottom right on the given signature line. Our HP LaserJet printer has a SIMM installed which contains the signature in digitized form.  I need to issue a hexadecimal instruction using PCL which contains the code that tells the printer to print the stored signature. I know this is doable in SAPscript, but is it doable in Adobe??? 
    Thank you,
    Eileen

    Hi Eileen,
    I think it is handled differently in Adobe forms as here all the print data is created by ADS.
    See the document Digital Signature Setup at:
    www.service.sap.com/hrin -> Media Center -> Key Documents
    This decribes the process.
    The link below and SAP Note 1168740 also contain information.
    http://help.sap.com/saphelp_nw70/helpdata/EN/46/1ca382f3ec5873e10000000a11466f/frameset.htm
    Regards,
    Aidan

  • How to print at 1440, 2880 dpi now? Epson 2200.

    The dropdown is gone to choose hi-rez. Now I just get 180, 360, 720.
    I have: Epson 2200, Leopard, just installed Epson 2200 drivers.
    Thx
    Message was edited by: intellivision

    Same problem here (except for no 180). The options seem to be very restricted despite the fact that the printer settings say that I have the latest driver installed. Epson R1800.

  • How to print ALV with full page width used?

    Dear all,
    I have a report which print out with a small font if some of the fields have a long data content, while there a large white space on the right hand side.
    After a few test, I think the following cause the problem:
    1) The line column is less then the page column
    2) The setup leave write space unused in the right side
        (Tested by setup a format which have the same column count as the testing print out data)
    Would like to know are there any work around on this.
    Regards
    Bill
    Edited by: Bill Chie on Jun 13, 2011 7:23 PM

    Hi Wiz,
    Thanks for the information.
    But it look like that it only affect the column width but not the migrate, anyone have any idea about the migrate setting?
    And I would like to know if I can:
    - Setup a limit for the long text limit
    - It the text over the limit, go to 2nd line
    Regards
    Bill

  • Does anyone know how to print out a premiere timeline to use as a shooting board?

    I've put together an animatic in Premiere. What I'd like to do is print it out now as some kind of shooting board. So premiere could take one frame from each clip and print them out in order... Is that remotely possible? Does anyone know if there's a plugin that can do this kind of thing?
    Thanks in advance for any replies...
    Olly

    Ann is correct, of course. Unless...
    It depends on exactly what you have and where you want to go with it. It is possible to just export to a series of images from the sequence. Then just use Bridge to find the exact frame you want and copy, or move it, to a different directory. Or use Lightroom and create a Collection. Then print them as desired.
    I can't determine your experience level, so if you have questions about what I just wrote, please ask them. I don't want you accusing me of filling up your hard drive.
    Basically, I am suggesting that if you have the hard drive space, export to TIF, or PNG or JPG. Just be aware that the files sizes can be unreasonably large. A TIF of a 1920X1080 frame just came out to 7.92MB for me, while the JPG was only 920KB. If you have the drive space, and it can be an external drive if you have the time to wait, you would end up with a huge folder full of images, but with Adobe Bridge, if the differences in the images were easy enough to see as you scroll through them, you could pick out the ones you want and it would certainly be faster than exporting each one individually.
    One way to cut down on the number of pictures would be to nest the sequence, then change the speed of the sequence to 1000%. That way you get every tenth frame. If that is sufficient for your needs (kind of depends on the footage, I suppose) then you get 1/10th the number of images exported.
    I am a bit of a lazy guy, always looking for the easy way out. And if you have the drive space, believe me, this is the lazy way to do it.

  • Officejet K550 status, How to print

    I am using Officejet Pro K550 with Windows 7.  I want to know the status of my ink levels on all cartridges.  The HP help links tell me to print a status report, but I am not able to find out how to print such a report.  Toolbox used to do it for me, but now with HP turning over responsibility for drivers to Microsoft we are left with an incomplete driver.
    How do I get my printer to print a Status report?
    Thanks in advance for any advice you can provide.

    You can get a very detailed report--beyond that of the configuration page--by doing the following:
    Enter the IP address of the printer into the URL bar on your browser.  You will get everything the toolbox gave you and more.  If you don't know the IP address, it will be printed on the configuration page.
    If you don't have a networked computer, the configuration page is about the best you can do.
    After I got a computer with Win 7 64-bit, I encountered the same issue, but I happened on this solution.

Maybe you are looking for