How to print blank page after group change

Hi,
I would like to print my report like this:
(No1)
Page1
Page2
Blank Page
(No2)
Page1
Page2
Blank Page
No3
How can I make this?
Thanks
Gregor
gt

Insert an empty frame with a Page Break Before and Page Break After, or use these properties to see if you can get the result you want in your current layout model.

Similar Messages

How to print blank page in script

Hi all,
how to print blank page in script

Hi,
Try the command /: NEW-PAGE. Let me know if it is working.
Ray

HP 3510 All In One only printing blank pages after cartridge replacement

Recently replaced my blank ink cartridge after supply level showed low, and printed output looked faded.
Using genuine HP product - check
Cartridge supply level good - check
Powered on and off twice - check
Installed, removed, re-installed cartidges - check
Good paper - check
Alignment prints blank page - does not print partial or low quality, just produces a blank page.
Printing from my computer, a word document, also produces a blank page - not parital - blank.
Was printing before the HP cartridge change.
Did I buy a bad HP cartridge?
Any help would be appreciated.

Forgot to mention that I am not getting an error message either, except when I go through the motions of scanning the (blank) alignment page. That error is related to the fact that it is blank though.
Thanks for any assistance.

Laserjet 4M Plus (C2039A) prints blank pages after cleaning?

I have a Laserjet 4M Plus (C2039A) that was working well. I was getting toner streaks so I disassembled the covers and cleaned dust and toner out. Cleaned plastic and plates with soapy sponge, cleaned rollers with alcohol, brushed and used air to clean dust. I'm good with mechanical projects. After re-assembling, I print blank pages. The menus, display, and computer interface seem fine. Paper feeds correctly. Self Test displays no errors, but I am unable to read printed test results or settings. I went into Service Mode, and ran Self Test there. I'm ready to disassemble it again, but do not know where to look for improper fit. What would prevent any characters from being printed? I'm using Windows XP drivers, and parallel port cable.

Hello kbright,
Welcome to the HP Consumer printer Forums.
The product you have is a commercial printer. I suggest posting in the forum for HP Business Support for a better chance at finding a solution.
Here is the link to the Commercial Laserjet board:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

Firefox 17 on Windows 7 prints blank pages after printing selection

I need to be able to highlight text on a webpage and print only that text using the print selection inside the file/print tab. However, instead, I am getting only that highlighted text AND then blank pages (with headers and footers) keep printing (how many pages that print depends on the actual size of the webpage).
I have Windows 7, 32bit and Firefox 17. I updated Firefox this morning and restarted but the problem still exists. I did not have this problem when I had Windows XP.
The print selection works properly in IE9.

Firefox's Print Selection feature has always left much to be desired...
What I get is blank pages ''before'' the selection but not after. You get blank pages for the entire document? That's especially unhelpful.
I am aware of two ''workarounds''. Each isolates the selection by itself so you can print it normally, i.e., without choosing Print Selection.
'''[https://addons.mozilla.org/en-US/firefox/addon/nuke-anything-enhanced/ Nuke Anything Enhanced]'''
After installing this add-on, when you have a selection and right-click it, you can choose "Remove everything else" to isolate the text for printing. Note that you need to reload the page to see the rest of the content again.
'''Bookmarklet'''
Before learning about the above, I wrote a small script to isolate the selection for printing. I wouldn't use it if you are filling in a form, making a purchase, etc., since the script duplicates part of the page and this may break the form. On the other hand, at least there is some level of undo without reloading the page.
If you want to try it, here are the steps:
(1) Select and copy the following line of script (it's all one long line):
javascript:var sel=window.getSelection(); if(!sel.isCollapsed){var rng=sel.getRangeAt(0); if(!rng.collapsed){var docfrag=rng.cloneContents(); if(!document.getElementById("divHideMe")){var rng2=document.createRange(); rng2.selectNodeContents(document.body); var myContainer=document.createElement("DIV"); rng2.surroundContents(myContainer); myContainer.setAttribute("id","divHideMe"); rng2.detach();} myContainer.style.display="none"; if(document.getElementById("printFrag")){var myFrag=document.getElementById("printFrag"); while(myFrag.firstChild) {myFrag.removeChild(myFrag.firstChild);} myFrag.style.display="block";}else{var myFrag=document.createElement("DIV"); myFrag.setAttribute("id","printFrag"); document.body.appendChild(myFrag);} myFrag.appendChild(docfrag); rng.detach(); var myP=document.createElement("P"); myFrag.appendChild(myP); myP.setAttribute("id","killBtn"); var myBtn=document.createElement("INPUT"); myP.appendChild(myBtn); myBtn.setAttribute("type","button"); myBtn.setAttribute("value","Return to Page"); myBtn.setAttribute("onclick","document.getElementById('divHideMe').style.display='block'; document.getElementById('printFrag').style.display='none';"); myStyle=document.createElement("STYLE"); myFrag.appendChild(myStyle); myStyle.setAttribute("type","text/css"); myStyle.setAttribute("media","print"); myStyle.innerHTML="#killBtn{display:none}";}} void 0;
(2) Right-click the Bookmarks Toolbar and choose New Bookmark. (If you do not ordinarily display the Bookmarks Toolbar, you can add it to the menu instead. Whatever will be convenient.)
(3) Click in Location and paste the script.
(4) Click in Name and name it whatever you like (I call it Crop4Print) and then click Add.
Now after selecting text, click the bookmarklet button to hide the rest of the page.

How to print blank records after the detail records in a masterdetail report

Hi,
Developing a report for time and attendance record. In this report I am printing all the employees in a department, limiting the no. of records per page to 10.
I need to insert blank lines at the end of all of the detail records in a page that has less than 10 employee records so that the no. of records displayed on a page can always be 10(these blank lines will facilitate the management to note down the temporary employees who worked for the department but are not part of the department).
I am using a tabular form with group above layout.
The report layout is as follows:
Department : FINANCE & ADMINISTRATION
Employee Name | Employee Number |
1 Jim | 1234 | _________________
2 John | 5678 |__________________
3 blank
4 blank
5
6
7
8
9
10 balnk
Supervisor's Sign:______________________
Note: the no. of blank lines should be inserted dynamically based on the no. of emp. records being printed on the page.
Any help is greatly appreciated.
Thanks in advance.
Kavita.

Your solution works when I am not limiting the no. of records per page for a department to 10 records and when I want to print blanks lines for the depts that has fewer than 10 employees in it.
Exactly in my report I have several dept's that has more than 10 emp's. In such cases I'll be printing first 10 in one page and the rest in the next page. Now I want to dynamically print the blank lines in the second page depending on the no. of emp's on that page. I tried to acheive this by using a CS column that reset's at page level but, REPORTS is not letting me use CS column that reset's at page level in a format trigger. I also tried to copy the CS value into a parameter and or to a Place holder column and did not help.
Any more work around ideas to acheive this?? please help.
Thanks alot
Kavita.
Hi
Create a column called Serial_No in ur emloyee query like this
select 1 , empno ,ename from emp;
Create a summary column on the serial column with the function SUM
and resetting it to Page
Display the column in the report by using the text color as white
so it doesn't display in the report
I think this should help u i believe
Sri
Hi,
Developing a report for time and attendance record. In this report I am printing all the employees in a department, limiting the no. of records per page to 10.
I need to insert blank lines at the end of all of the detail records in a page that has less than 10 employee records so that the no. of records displayed on a page can always be 10(these blank lines will facilitate the management to note down the temporary employees who worked for the department but are not part of the department).
I am using a tabular form with group above layout.
The report layout is as follows:
Department : FINANCE & ADMINISTRATION
Employee Name | Employee Number |
1 Jim | 1234 | _________________
2 John | 5678 |__________________
3 blank
4 blank
5
6
7
8
9
10 balnk
Supervisor's Sign:______________________
Note: the no. of blank lines should be inserted dynamically based on the no. of emp. records being printed on the page.
Any help is greatly appreciated.
Thanks in advance.
Kavita.

How to remove blank pages after endnotes?

I am formatting an academic book, and am receiving each chapter separtely, piece by piece, and each chapter is a separate file. The author wants footnote numbers in the text, but wants the references to be formatted as combined endnotes at the end of the book (not footnotes at the bottom of the page). Each chapter's footnotes begins with #1. I have inserted the footnote numbers, and then gone to the end of the chapter/document and deleted the endnote text from that chapter. However, Word still thinks that the endnotes are there and won't let me delete the extra blank pages where the endnotes text once existed. I have tried going into "Normal" and then Footnoes and removing the "endnote spearater," as well as the "endnote continuation separater": this has removed the lines, but not the pages. Any ideas? Suggestions? What if I don't insert the endnote text at all in each chapter, but simply create a new document with the end of book endnotes - woudl this work? Thanks.

HI Julie,
Are you asking about doing this in Microsoft Word? If so, a better place to ask would be the MS Word (Mac) forum at Microsoft's site. Click the link to get there directly.
Regards,
Barry

Kodak printer printing blank pages after upgrading to OS X Yosemite

Since updating to OS X Yosemite last year, I have been having trouble printing to my Kodak Office Hero 6.1. Print message sends perfectly to printer but the page is just printed as a blank. The printer head moves as if it was printing but no ink comes out. I have done the following:
1. Changed printer cartridge
2. Reset printer and the WIFI network is prints through
3. Updated the software settings through Kodak
4. Removed and re-added print drivers through apple
I am at a loss to know what to do now. Any ideas?

This worked for me-
Do the following steps to address the issue:
Go to Spotlight, then enter Terminal and press Enter.
The terminal window/program opens.
Enter sudo sh -c 'echo "Sandboxing Relaxed" >> /etc/cups/cups-files.conf' in the terminal.
Enter your system OS login password when prompted.
Note: The password you enter will not appear, which is normal. Be sure to enter the correct password.
Enter sudo launchctl stop org.cups.cupsdYour screen will look similar to the following:
Last login: Mon Nov 10 16:34:57 on console
Macintosh:~ lindaterry$ sudo sh -c 'echo "Sandboxing Relaxed" >> /etc/cups/cups-files.conf'
Password:
Sorry, try again.
Password:
Macintosh:~ lindaterry$ sudo launchctl stop org.cups.cupsd
Macintosh:~ lindaterry$
Try to print again.
If the issue continues, contact us for further support.

Hp laser jet 1020 is printing blank pages after it fell off my desk

The printer appears to run just as it did before it fell on the carpeted floor, but the pages come out blank. Can it be repaired or is it toast?

Hello,
Please click HERE to access the steps that should resolve the issue .

To print blank pages

HI All,
I have requirement to print blank pages after first page. the number of blank pages to be printed are dependent on the number given from the selection screen.
for example if in the selection screen the number is given as 2 ....then 2 blank pages should be printed. that means total 3 pages should be printed.
When am printing its going for 4 pages rather 3 pages.
Pls, suggest me the possibilities.
thanks
-suresh

There have been some changes in the contacts on the supplies, but this should not cause any issues in printing.
I would suggest you try the troubleshooting steps in this document. If that does not resolve the issue then the post here may help.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Double sided printing, adding blank page after two different groups

Post Author: adepper
CA Forum: General
I have created a report that is structured as such:
Group 1 - Based on formula, groups by type
Group 2 - Based on formula, groups by use
Group 3 - use (pulled directly from Database)
Group 4 - ID
I have the report printing an extra page after group 3. I used this formula in the Section Expert - New Page After
remainder(pagenumber,2)=0
I also use that formula to reset the page number
What I would like to do is print a second blank page if group 2 does not start on the top of the page, meaning I do not want either group 3 or group 2 to start on the back of a page, so that this report can be placed in a binder, with dividers.
I have group 3 giving me a blank page with no issues, it is just group 2.
Any help and/or suggestions would be appreciated. If I did not give enough details, I am sorry.
Thanks!

Post Author: adepper
CA Forum: General
After a lot of blood, sweat and tears, not to mention a lot of curse words directed at the computer, I was able to get this to work. Now I just have to do it for three groupings instead of two (deliver the impossible to your bosses, and they turn around and move the brass ring right out of reach again!)
In case anyone is interested in how I was able to manage this (I found many sites where people asked this question, but not one complete answer), this is what I did:
In the footer section:
Group 4 - ID (database field)
Group 3 - PrimeUse (database field)
    3a - Contains data
    3b - Contains data
    3c - New Page After, Keep Together, and Reset Page Number After are all checked. In the condition for Reset Page Number After I also have this formula:
    remainder(pagenumber,2)=0
    3d - New Page After, Keep Together, and Reset Page Number After are all checked. In the condition for New Page After I have this formula:
    remainder(pagenumber,2)=0
Group 2 - Suppressed
Group 1 - Grouped by Store Type -
    1a - Suppressed, New Page After and Keep Together are all checked.
    1b - New Page After and Keep Together are checked. In the condition for New Page After I have to following formula:
    remainder(totalpagecount,2)=1
If anyone sees any errors, or if you think you can get it so that I get another page blank, after Group 1, if the Group starts on an even numbered page, I would appreciate the help.
Thanks!

HP 6510 printing only blank pages after changing print cartridges

Hi,
My HP 6510 is printing only blank pages after I installed new print ink cartridges. I tried cleaning the print heads, aligning the printer... which did result in some pages printing with a little color (but it seemed "off" to me). That said, when I try to print a regular document from my PC it only prints a blank page.
I can't seem to figure this one out on my own - please help!
Thanks!
Chloe

The document here may help resolve black not printing on your Photosmart 6510. Be sure the cartridges are vented as shown in solution two.
Is your printer still in warranty? You can check with HP's warranty tool here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Printer just started feeding a blank page after some, but not all printed documents

Printer just started feeding a blank page after some, but not all printed documents

Hi @cam21 ,
I understand that you are having issues printing, after some documents you are getting blank pages. I would be happy to help you.
I would do a hard reset to see if that will resolve the issue.
Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation.
What application are you printing from?
It may be a setting in the application.
Does this happen from all applications?
Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. http://www.hp.com/go/tools>Using HP Diagnostic Tools for HP Printers in Windows.
How is the printer connected? (USB/Ethernet/Wireless)
What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
If there is anything else I can help you with, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

How to suppress blank pages in 11i from printer output

Hi All,
We were working on Oracle Reports and registering in 11i thr concurrent program and while running thr concurrent request we are getting blank pages from printer output, please let me know how to suppress blank pages as i need to get printouts without any white pages.
Say for example if we run concurrent request and o/p is 10 pages which consists of 3 blank pages so finally we need to get printer o/p with 7 pages which are having data as i need to stop printing which are having white pages.
Please help as this a critical scenario.....
Regards,

Please post the details of the application release, database version and OS.
We were working on Oracle Reports and registering in 11i thr concurrent program and while running thr concurrent request we are getting blank pages from printer output, please let me know how to suppress blank pages as i need to get printouts without any white pages.
Say for example if we run concurrent request and o/p is 10 pages which consists of 3 blank pages so finally we need to get printer o/p with 7 pages which are having data as i need to stop printing which are having white pages.
Please help as this a critical scenario.....Does this happen to all concurrent requests?
Is the issue with all printers or specific ones only?
What if you use the lp command from the OS to print the concurrent requests output files, do you still get blank pages?
Do you use PASTA?
Please see these docs/links.
How To Investigate Printing Issues and Work Towards its Resolution? [ID 297522.1]
Oracle Applications Postscript Printing [ID 99495.1]
Only First Line Of Concurent Output Prints And Then Blank Lines/Pages [ID 452906.1]
Apps Reports Generate and/or Print With Incorrect Page Break Points [ID 359716.1]
https://forums.oracle.com/forums/search.jspa?threadID=&q=Blank+AND+Page+AND+Print&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=Blank+AND+Page&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Printing blank pages, how do I fix

My printer prints, but it printing blank pages, how do I fix?

You could try deleting the book and re-downloading it and see if it's then complete. If it's still missing pages then you could use the 'report a problem' link : http://support.apple.com/kb/HT1933

How to print blank page after group change

Similar Messages

Maybe you are looking for