How to print envelopes in pages, How to print envelopes in pages

I presume you are using the Pages application, is that correct?
So start off by launching Pages and choose one of the regular envelope styles. Traditional works well for me.
Next go to the File menu and select Page setup. From the menu that says Paper Size select Manage Custom Sizes. In the resulting dialog, there should be a button on the left labeled "+". Click it. In the Paper Size area, select Width 5 in and Height 7 in. Name the size (where it says "untitled" something descriptive like "5 x 7 envelope". Click the OK button. The Paper Size menu here should now say the description you gave it. Click OK again. Your work area should now be a 5 x 7 envelope.
Best of luck.
PS If you are using Word or some other program, the process is probably the same or very similar.

Similar Messages

How can I stop Address Book (Lion) from printing an extra blank page when I print an envelope

Whenever I print a mailing envelope in Lion's Address Book, it prints fine but then prints a blank page following. How can I stop this?

HP printers for years have had a problem printing an extra envelope from the Apple Addressbook Application with the # 10 envelope.
Solution: Select a #9 envelop. This prints about the same size and does not have an extra envelop.
How to: From Address book, select print, Style: Envelopes, Layout: Layout pulldown Official 9 then print
Interestingly the two smaller and two larger sizes only print one envelope. You can test this by clicking pdf and open pdf in preview.
Over the years I have called HP and they couldn't solve the problem.
I have told Apple today when I figures out the workaround.

How to load envelopes in to Officejet 4630e printer using microsoft works word in order to print

how to load envelopes into Officejet 4630e printer using microsoft works word in order to print. need instructions

Hey @JC155,
Welcome to the HP Support Forums!
I understand that you would like to know how to load and print envelopes with your HP Officejet 4630 e-All-in-One Printer. I would like to assist you today with printing envelopes!
First, I'll have you properly load the envelope:
Open the paper tray door, and then pull it toward you to extend the paper tray.
Gently pull out the paper tray extender, and then lift up the paper catch.
Pull out the paper tray, and then pull out the tray extender
Slide the paper width guides to their outermost position.
Slide out the paper width guides
Remove any paper from the paper tray.
Load the envelope into the middle of the paper tray, print side down, and with the flap on the left and facing up.
NOTE: You can load one or more envelopes in the tray, but do not load more than five envelopes at a time. Do not use shiny or embossed envelopes or envelopes that have clasps or windows.
Load the envelope
Slide in the paper width guides until they rest against the edges of the envelope.
Slide in the paper width guides
Push the paper tray forward until it clicks into place.
NOTE: Push the paper tray all the way in to avoid an error message.
Push the paper tray forward until it clicks into place
Source: Loading Paper and Envelopes for HP Officejet 4630 and Deskjet Ink Advantage 4640 e-All-in-On...
Next, I'll have you print the envelope through MS Word:
How to Print Envelopes from Word:
1. Open Word and click on Mailings at the top
2. Select 'Envelopes' from the top left hand side
3. An Envelopes and Labels page should now open. Enter your Delivery and Return Addresses.
4. Select 'Options' on the bottom right hand side.
5. Under the 'Envelope Options' tab ensure that your Envelope size is appropriately selected.
6. Select the 'Printing Options' tab at the top. You now need to select the appropriate Feed Method for your product.
7. Make sure that you choose the 'Face Down' option.
8. Also ensure that 'Clockwise Rotation' is selected.
9. Hit 'OK' and 'print'
For additional guidance, please refer to the following video:
Please let me know if the steps I've provided resolved your envelope printing issues. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Ihave an ipad and an epson nx430 printer. I tried to print my airline itinerary and it printer 4 pages that was mostly ads. How can i print just the itinerary which fits on oneage?

I have an ipad2 and an epson nx430 printer. I tried to print my airline itinerary and it printer 4 pages ,most ofwhich were ads. How can i focus just on the information that i need?

Does the website you're using offer a "printer freindly" button or perhaps the faciltiy to email the intenerary to yourself?
Matt

How do I set or get firefox to print more than one all pages the print using verizon emails is there a setting to change I have been told by verizon techs it is not my printer

when opening an email using verizon emails I can only print one page. I have checked an I do not have a printer or computer problem because the printer prints more than one page with others such as gmail. We feel there is a print setting in firefox that needs to be changed. How do I change this??

That is usually caused by a few different Bugs in Firefox, which seem to be fixed in the Firefox 4.0 betas.

When printing a list in Address Book, how can I select more than the default Attributes and keep them selected when I print again? I want to print ALL information for contacts so I have email address, notes, phone, company, title, etc all on one page.

When printing a list in Address Book, how can I select more than the default Attributes and keep them selected when I print again? I want to print ALL information for contacts so I have email address, notes, phone, company, title, etc all on one page. I don't want to have to check off an additional 5 or 6 attributes each time I print out contact information. Is there a way to change the default setting for printing lists, so it is not just "phone," "photo," and "job title?"

I have a user who wants to do this same thing. I did not find any way either to default the attributes to anything other than what you see the first time. Seems like such a trivial thing, hard to believe they do not allow it. I did find a program for this called iDress but I can't seem to download it from any links on the Internet. Not sure if it is free or not, but it was recommended by a link on the Mac support site.

When I download pictures from my camera they use to also downloan in Cannon's Easy Photo. In my new computer they don't. I want them to. How??? Also how do i edit photos in Photoshop and print 4 to a page?

When I download pictures from my camera they use to also downloan in Cannon's Easy Photo. In my new computer they don't. I want them to. How??? Also how do i edit photos in Photoshop and print 4 to a page?

Please study this, then come back with more specific questions
Learn Photoshop Elements 12 | Adobe TV
Learn Photoshop Elements | Adobe TV
Use of the tools is pretty much the same in all versions of the program.
"Edit" is a menu item in Photoshop Elements Editor. Don't you see this?

How can I print a pdf in the actual size with a page border?

How can I print a pdf in the actual size with a page border? (2 pages per sheet preferred)
I usually print pdfs of books at a copy shop and they turn out fine.
The problem comes when I try to print the same books at home.
I use Adobe Acrobat X with the same settings: "multiple pages per sheet" (2x1) and page border. But the pages are slightly shrunken when printed. I think this is because my printer can't print as closely to the margins. Still, two pages should be able to fit on one sheet in actual size. Are there any layout settings that I can play with to find a better fit, besides portrait and landscape?
If I select page scaling "none," I'm able to print the pdf in actual size, one page per sheet. But there's no option to add a page border.

I have a test with some questions (multiple choice, FIB, matching, etc). I have just one button to submit all the answers, and after submiting the student can see his score and review the test to know where he failed. He can't answer again. However, he can change the answer multiple times before submiting.
"if i turn on success/failure captions the student will see them while answering" - before submitting
"if i turn them off he wont know what's the right answer" - after submitting
My results page is the default. I didn't use any variable. When i go to the results page after reviewing the test all the entry boxes are "wrong".

How to print items in the MAIN window of the NEXT page (smartform)?

Dear forumers,
There are two pages (FIRST and NEXT) in my smartform with the same MAIN windows in each of the pages. Whatever that are changed in FIRST-MAIN window will also be seen in NEXT-MAIN window.
I will need to control the printing of table TABLE3 contents (already contained in the MAIN window) such that if a variable V_MAT_PRINT is 'X', the TABLE3 contents will only be printed in NEXT page and not printed in FIRST page at all.
How may I achieve this? Please help.
Thank you.

>
Mohammed Ahasanullah Mulla wrote:
> Hi Deborah,
>
> I had also faced a similar situation,in my case it was three pages..However i will try to tell you for 2 pages..After the second table .Add a program lines and force a page break only if V_MAT_PRINT is 'X'. After the program lines add a command and make the go to new page as second page.This will solve your problem.I have done the same and its working fine .If you have any questions do ask.
>
> Thanks,
> Ahsan
Hi Ahsan,
Here's my case.
If V_MAT_PRINT is 'X', print the following:-
FIRST page, MAIN window
- TABLE1
- TABLE2
- TABLE4
- TABLE5
NEXT page, MAIN window
- TABLE3
If V_MAT_PRINT is not 'X', print the following (no additional controls / changes are needed, everything remains unchanged):-
MAIN window
- TABLE1
- TABLE2
- TABLE3
- TABLE4
- TABLE5
In this case, is a page break suitable? I doubt it as TABLE4 and TABLE5 will still need to be printed back on the FIRST page regardless of the V_MAT_PRINT value.
Please advise further. Thanks.

How to print grouped field in the margin area of main page

I have one requirement where one grouped column has to printed in the margin area and not in the main area.
ie. if i group by deptno,
deptno has to be printed behind where date is printed in the margin area
and for each deptno page changes
how this can be achieved ? any idea
because you cannot move deptno from its parent frame.
anybody knows about this?
regards

To have one dept per page, set the Maximun Records per Page property of the dept repeating frame to 1. To display dept in the margin, create summary column that would find Max (or First) deptno with Reset on Page.

How can I be sure a table is printed with at least 1 item before page break

I've got a form with several tables (small and large ones, depends on the selection) and I don't like to print only the header on the first page (without any items) while a page break is needed. I like to reserve lines for every table (like in smartforms) or to check a line counter of the page to trigger the page break on my own if not enough space is available
Do you have any idea how I handle this problem?
Thank you very much
Lagogar

To specify the minimum number of repetitions, select Min Count and type a number in the associated box. If this option is set to 0 and no data is provided for the objects in the subform at data-merge time, the subform is not placed when the form is rendered.

How do you suppress page numbers. I am trying to print a screenplay for the first time since switching to Pages and I can't suppress Page

How do you suppress page numbers. I am trying to print a screenplay for the first time since switching to Pages and I can't suppress Page #1 without making the rest of the pages inaccurate, as page #1 is the Title Page. Does anyone have any suggestions?

When you signed to be able to post in the forums, you were urged to read and accept the Terms of Use ruling these forums.
They claim :
The contents of the "More Like This" box prove that applying the rules you would have get the wanted explanations without creating this new thread.
Yvan KOENIG (VALLAURIS, France) mardi 26 avril 2011 10:04:03

How to get the total numbers of pages have been printed using pl/sql

Dear All ,
I want to store the total number of physical pages printed into a database table,, how could I retrieve the value of the total number of pages .
I am using Oracle Report 6i
thnxxx in advance :)

At the end of your report (i.e. after all the frames from your data model) place a dummy field. You can get the page number with srw.get_page_num in the format trigger of this field. Since this is the last field of your report, this is also the last page number.

How to print a PDF file that was display in my page...

Hi !. My doubt would be the following one... I would like to know how to print a pdf file that was displayed in my page ?... I mean the PDF file not the page...
The PDF would be in this url:
http://iprodesa.lasegunda.com.ar:8090/datos/pdf/830.pdf
How could I implement this ?...

This first question which comes to mind is how do you display the pdf file in the browser?
For this the browser uses a plug in (e.g. adobe reader) which already has the ability to print the pdf file. Depending on the version of your plug in, printing is started differently.
Timo
Ps: which jdev version do you use?

SMARTFORM: how to create 3 copy (each copy can print more than one page)

SMARTFORM: how to create 3 copy (each copy can print more than one page)
Hello everyone.
my user want to have form that print 3 copy.
such as 1 copy description = master, 2 copy description = copy 1 ,3 copy description = copy 2.
so i create 3 page . I copy from page 1.
and in each page there is main window which can have data more than 1 page.(such as have a lot of sale data ,it's take 2 page for show output .so it's take 2 page in each copy)
please help me.
how to set page and window in each page for print 3 copy and each page can have main window that print more than 1 page

Hello Vinit.
thank you very much for your help.
could you help me more please.
in below code
DO NAST_ANZAL TIMES.
l_counter = l_counter + 1. " << pass this to FM and use for the TEXT to print
CALL FUNCTION LF_FM_NAME
           EXPORTING
                     COUNTER = l_COUNTER   " USE this to derive the text into PRINTOUT
enddo.
Now i out of office .so i cannot test.
where do i set NAST_ANZAL for 3 ?
can i input ?
NAST_ANZAL = 3.
DO NAST_ANZAL TIMES.
l_counter = l_counter + 1. " << pass this to FM and use for the TEXT to print
CALL FUNCTION LF_FM_NAME
           EXPORTING
                     COUNTER = l_COUNTER   " USE this to derive the text into PRINTOUT
enddo.
Edited by: dittaporn nanasilp on Mar 12, 2011 3:33 PM

How to print envelopes in pages, How to print envelopes in pages

Similar Messages

Maybe you are looking for