How to Print Selection-Screen along with ALV Report output

Hi,
I have a requirement wherein i need to also print the Selection Screen of a report when I print the ALV report output.
Basically i need to print the ALV output along with selection screen.
Could you plz suggest me the way.
Regards,
Nitin

Hi,
My selection Screen is a very big one. It contains around 30 select-options.
So is their any standard method in which you can choose whether you want to take the output printout with or without Selection screen.
Regards,
Nitin

Similar Messages

Print Selection Screen Parameters in ALV report only once

Does anyone know how to print the selection screen within a ALV report.
I've tried everything. I have the code to capture the selection parameters into a internal table. I can use top_of_page but I only want it printed once.

Hi,
If you have captured the selection screen entries in an internal table, then you could display it once by using the BLOCK LIST ALV.
Check the function module.
REUSE_ALV_BLOCK_LIST_DISPLAY
Using this function module more than 1 alv could be display in the report.
In our case ..there will be two alvs ...one for the selection screen n other for the main report output.
Check the following example on the block List ALV....
BALVBT01.
Regards,
Vara

Displaying selection screen details in Alv Report output display as Header

Hi all,
May be somebody knows how I can show selected values with select-options in top_of_page using REUSE_ALV_GRID_DISPLAY.
This shoud work for all the reports and diff selection screens .
I need one dynamic process which will for display any report selection screen selected details.(Basically varient information of report).
Small example if possible, please.
Thanks in advance,
Rimas

Hi Thiru,
Thanks for the input.
This is my exact requirement.
Hi Experts,
I would like to Display / Print Select-options selected details in ALV Header.
Ex: Say suppose here i enter kunnr as 1000
                                        lifnr as    2000 to 4000
                                        p_langu as 'EN'.
                                       p_dir as 'C:\TEMP,
                                       p_upda as 'X'
for selection screen below.
SELECTION-SCREEN :BEGIN OF BLOCK blk1 WITH FRAME TITLE text-000.
SELECT-OPTIONS : s_kunnr FOR kna1-kunnr.
SELECT-OPTIONS : s_lifnr FOR lfa1-lifnr.
PARAMETER      : p_lanuge LIKE t002-spras DEFAULT sy-langu.
PARAMETER: p_dir LIKE rlgrap-filename
           DEFAULT text-003 LOWER CASE.
PARAMETERS: p_upd AS CHECKBOX DEFAULT 'X'.
I dont want to Hard code selection screen values like
DATA: header TYPE slis_t_listheader,
wa TYPE slis_listheader,
wa-typ = 'S'(093).
wa-key = s_lifnr .
wa-info = 'Vendor no".
APPEND wa TO header.
I want dynamic process for all of my selection screen values selected
hard code may be it will be fine small selection screen it will work.
Fur that i got one process to get dynamically through fm
Ex: DATA: irsparams TYPE rsparams OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'RS_REFRESH_FROM_SELECTOPTIONS'
EXPORTING
curr_report = program
TABLES
selection_table = irsparams
EXCEPTIONS
not_found = 1
no_report = 2
OTHERS = 3.
loop at irsparams.
write : / irsparams-SELNAME.
write : / irsparams-SIGN.
write : / irsparams-OPTION.
write : / irsparams-LOW.
write : / irsparams-HIGH.
endloop.
I have done my requirement partially but i am failed to achive my full requirement.
Because
rsparams strcture is diff from slis_t_listheader.
Can any one help me for further assistence to display irsparams strcture data in alv header.
Thanks
Nag

How to print the list outout with out getting output?

How to print the list outout with out getting output?
My requirement is that when i exicute the program the list output has to print with out getting output list display on the screen.
if possible cana anyone share the code....
Phani,

See this Sample Program.
DATA: PARAMS LIKE PRI_PARAMS,
 DAYS(1) TYPE N VALUE 2,
 COUNT(3) TYPE N VALUE 1,
 VALID TYPE C.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING DESTINATION = 'LT50'
 COPIES = COUNT
 LIST_NAME = 'TEST'
 LIST_TEXT = 'SUBMIT ... TO SAP-SPOOL'
 IMMEDIATELY = 'X'
 RELEASE = 'X'
 NEW_LIST_ID = 'X'
 EXPIRATION = DAYS
 LINE_SIZE = 79
 LINE_COUNT = 23
 LAYOUT = 'X_PAPER'
 SAP_COVER_PAGE = 'X'
 COVER_PAGE = 'X'
 RECEIVER = 'SAP*'
 DEPARTMENT = 'System'
 NO_DIALOG = ' '
IMPORTING OUT_PARAMETERS = PARAMS
 VALID = VALID.
IF VALID <> SPACE.
SUBMIT RSTEST00 TO SAP-SPOOL
 SPOOL PARAMETERS PARAMS
 WITHOUT SPOOL DYNPRO.
ENDIF.
Awrd POints If useful
Bhupal

How we can select two records in alv report

how we can select two records in alv report

Hello,
You can use the method get_selected_rows.
 CALL METHOD gv_alv->get_selected_rows
 IMPORTING
 ET_INDEX_ROWS =
 et_row_no = lt_selected_rows.
READ TABLE lt_selected_rows INTO ls_selected_row INDEX 1 .
The table lt_selected_rows will contain all the selected rows.
Regards,
Beejal
**reward if this helps

Select mutiple rows in ALV report output

Hi All,
I want to select the Multiple records i in ALV report output with out holding the CNTL(Control Key).
Is there any options in Layout?
Please let me know
regards,
Ajay
Edited by: Ajay reddy on May 30, 2010 3:27 PM

Hi Ajay,
To select several rows without Control button, if the rows are adjacent:
- select the first and the last of the desired rows with Shift button pressed
or
- select a row, keep the mouse button pressed, and pass over the desired rows
I don't know an option without Control if the rows are not adjacent.
http://help.sap.com/saphelp_bw/helpdata/en/d1/7d9d37664e4d45e10000009b38f8cf/content.htm
Regards,
Paulo Carvalho

How to print Arabic text along with the English in smartform ( ECC6 version

Hi All,
our is ECC6 version, Non unicode, ABAP stack ( not dual stack )
is it possible to print in Arabic language in the above version ?
if yes, then please let me know how to print Arabic text and English text in the same smartfrom.
i tried in the following procedures :
1) i created standard text (SO10) in arabic language.
i called in the smartform ( include text - i )
langage AR
but system throws error message saying, required language is not installed.
2) if i use READ_TEXT function module.
text getting printed in diff format but not in arabic.
waiting for your replies..

ECC6 and Non-Unicode? I think you'll need multiple code pages, I doubt there's a mixed Arabic/Latin1 available. And I don't think SAP supports new MDMP systems any more. If you need to support multiple languages you really need to go Unicode. It's probably easier to do the Unicode conversion than to try to support multiple code pages and you have to make the switch eventually.

Printing logo with ALV report output?

Hi all,
I have written a sinple program to display a report output in ALV grid format and inserted a logo in it usingh standrad FM. Though the logo is inserted successfully displaying with list , but when i am clicking on print preview the logo is missing.
Please help me on how to print the logo with the list?
Thanks,
Vamshi.

Hi Krishna,
-->Firstly go to T-Code OAER.
-->Give Class Name as PICTURES
-->Give Class Type as OT
-->Give Object Key as(watever the name you wish to give)
-->Example key 1000
-->Click on Execute.
Here you will get Standard Document Types.
Select which ever you want i.e., Attachment,Screen,Template ,etc.
Double click on Attchment it will ask you the File on the Desktop.
Upload the image.
Now you can see the Image in the Folder PICTURES.
Now go to the Report.
Function Module 'REUSE_ALV_COMMENTARY_WRITE'.
i_logo = '1000'.
Hope this will Help you.
With Regards,
Sharmishta.

How to print the Grid title in ALV Report?

Hi All,
I write ALV Report.When i am going to print this report it is not printing the Grid Header(ie.Title ).even in Print Preview Also i m not getting the title.It shows the Gird with Values.How Can i print the title Also...
Regards,Ravi

Hi,
u will declare the data as below like this
DATA: LIST_TOP_OF_PAGE TYPE SLIS_T_LISTHEADER,
        TOP_OF_PAGE TYPE SLIS_FORMNAME VALUE 'TOP_OF_PAGE'.
DATA : ST_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
         IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
         ST_EVENT TYPE SLIS_ALV_EVENT,
         IT_EVENT TYPE SLIS_T_EVENT.
DATA : ST_LIST TYPE SLIS_LISTHEADER,
         IT_LIST TYPE SLIS_T_LISTHEADER,
         IT_LIST1 TYPE SLIS_T_LISTHEADER,
         IT_LIST2 TYPE SLIS_T_LISTHEADER.
START-OF-SELECTION.
IF G_FLAG = SPACE.
W_REPID = SY-REPID.
G_TOP_PAGE = 'TOP-PAGE'.
      ST_LIST-INFO = ' Title Name '.
      APPEND ST_LIST TO IT_LIST.
      ST_LIST-INFO = ' second Name'.
      APPEND ST_LIST TO IT_LIST.
    ELSE.
ENDIF.
FORM TOP-PAGE .
DATA: V_LOGO(15).
    V_LOGO = 'LOGO'.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      IT_LIST_COMMENTARY = IT_LIST
      I_LOGO             = V_LOGO.
    I_END_OF_LIST_GRID       =
ENDFORM.                    "TOP-PAGE

How to display selected table fields in ALV report.

Hi,
I am displaying data from table EKPO using ALV through this query.
select * from ekpo into table itab_ekpo up to 25 rows.
bt if i need to display selected fields like
select ebeln matnr netpr from ekpo into table itab_ekpo up to 25 rows.
IT gives error GETWA_NOT_ASSIGNED.
FIELD SYMBOL HAS NOT YET BEEN ASSIGNED
CAN ANYONE PLZ HELP ME.

Hi ,
 I am pasting the code in which i am getting the error.Plz help.
REPORT ZHALV.
tables:ekpo.
data itab_ekpo type ekpo occurs 100 with header line.
types: begin of itab_new,
 f_ebeln type ekpo-ebeln,
 f_matnr type ekpo-matnr,
 f_netpr type ekpo-netpr,
 end of itab_new.
data itab1 TYPE STANDARD TABLE OF itab_new initial size 0.
type-pools: slis.
DATA: lt_fieldcat TYPE slis_t_fieldcat_alv,
 lf_fieldcat TYPE slis_fieldcat_alv.
DATA: ws_repid TYPE sy-repid VALUE 'ZHALV'.
DATA: l_layout TYPE slis_layout_alv.
selection-screen Begin of block block1 with frame title text-111.
select-options : S_EBELN for EKPO-EBELN.
selection-screen end of block block1.
INITIALIZATION.
start-of-selection.
select ebeln matnr netpr from ekpo into table itab1 up to 10 rows WHERE EBELN IN S_EBELN.
*select * from ekpo into table itab_ekpo up to 25 rows.
PERFORM build_fieldcatalog.
PERFORM build_layout.
PERFORM GET_DETAILS.
end-of-selection.
*& Form build_fieldcatalog
 text
FORM build_fieldcatalog .
PURCHASING DOCUMENT NUMBER
CLEAR lf_fieldcat.
lf_fieldcat-fieldname = 'EBELN'.
lf_fieldcat-ref_tabname = 'EKKO'.
lf_fieldcat-ref_fieldname = 'EBELN'.
MATERIAL NUMBER
CLEAR lf_fieldcat.
lf_fieldcat-fieldname = 'MATNR'.
lf_fieldcat-ref_tabname = 'EKPO'.
lf_fieldcat-ref_fieldname = 'MATNR'.
APPEND lf_fieldcat TO lt_fieldcat.
NET PRICE IN PURCHASING DOCUMENT
CLEAR lf_fieldcat.
lf_fieldcat-fieldname = 'NETPR'.
lf_fieldcat-ref_tabname = 'EKPO'.
lf_fieldcat-ref_fieldname = 'NETPR'.
lf_fieldcat-cfieldname = 'WAERS'.
lf_fieldcat-do_sum = 'X'.
APPEND lf_fieldcat TO lt_fieldcat.
ENDFORM. " build_fieldcatalog
*& Form GET_DETAILS
 text
FORM GET_DETAILS.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 I_INTERFACE_CHECK = ' '
 I_BYPASSING_BUFFER = ' '
 I_BUFFER_ACTIVE = ' '
 I_CALLBACK_PROGRAM = ws_repid
 I_CALLBACK_PF_STATUS_SET = ' '
 I_CALLBACK_USER_COMMAND = ' '
 I_CALLBACK_TOP_OF_PAGE = ' '
 I_CALLBACK_HTML_TOP_OF_PAGE = ' '
 I_CALLBACK_HTML_END_OF_LIST = ' '
 I_STRUCTURE_NAME = 'EKPO'
 I_BACKGROUND_ID = ' '
 I_GRID_TITLE =
 I_GRID_SETTINGS =
 IS_LAYOUT =
 IT_FIELDCAT = lt_fieldcat
 IT_EXCLUDING =
 IT_SPECIAL_GROUPS =
 IT_SORT =
 IT_FILTER =
 IS_SEL_HIDE =
 I_DEFAULT = 'X'
 I_SAVE = 'A'
 IS_VARIANT =
 IT_EVENTS =
 IT_EVENT_EXIT =
 IS_PRINT =
 IS_REPREP_ID =
 I_SCREEN_START_COLUMN = 0
 I_SCREEN_START_LINE = 0
 I_SCREEN_END_COLUMN = 0
 I_SCREEN_END_LINE = 0
 I_HTML_HEIGHT_TOP = 0
 I_HTML_HEIGHT_END = 0
 IT_ALV_GRAPHICS =
 IT_HYPERLINK =
 IT_ADD_FIELDCAT =
 IT_EXCEPT_QINFO =
 IR_SALV_FULLSCREEN_ADAPTER =
 IMPORTING
 E_EXIT_CAUSED_BY_CALLER =
 ES_EXIT_CAUSED_BY_USER =
 TABLES
 T_OUTTAB = itab1
 EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2.
IF SY-SUBRC <> 0.
 WRITE: 'SY-SUBRC: ', SY-SUBRC .
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*append itab_ekpo to i_tab.
ENDFORM. "GET_DETAILS

How to get selection screen details of any report dynamically

Hi
We have a requirement where we need to submit different reports based upon certain conditions. I need to know FM or other way around to fetch the details of selection screen (name of selection screen parameters or select option and whether its a parameter or select option) any report. Please guide me in this regard.
Regards
Swetabh

DATA : SEL_TAB TYPE RSPARAMS OCCURS 0.
CALL FUNCTION 'RS_REFRESH_FROM_SELECTOPTIONS'
    EXPORTING
      CURR_REPORT           = 'ZRP_PACKING_INVOICE_MAIN'
    TABLES
      SELECTION_TABLE       = SEL_TAB.
    SUBMIT ZSH_SD_INVOICE_NEW WITH
                                    SELECTION-TABLE SEL_TAB AND RETURN.
above f.m will get the all details of selection screen and give u in internal table and that can be passed to submit statement...

How to print long raw text data in report output in single line?

Hi All,
I have a requirement where I need to print raw comma separated text data in the report output which end user will open in excel and can sort as required. I can not directly generate excel output.
Now there is huge set of data and each row from the report query should be get printed on single line, It should not get printed on the next line.
I tried to extending the report with 240 characters but still there are some text data which is getting printed on the next line.
Please share your view if someone has any solution on this issue.
Thanks in Advance.
Arun

Make the report even wider. By default a report layout can be 10 pages wide. If you need more, change the "Max. Horizontal Body Pages" property, and extend your layout too.
IMHO, I wouldn't even use Reports to create a csv file. Utl_file or an sqlplus script that spools to a file are better options I think.

How to use Write statement along with ALV output

Hi expert,
currently i have a requirement where i am first displaying message with write statement and after that ALV should be displayed ...something like below:
vendor number is wrong.
material number is wrong.
plant is wrong.
and then here ALV output -list of records updated in the database.
but as of now the ALV is shown first and when going back then the write message information is dispayed.
can anyone help how we can get this in only one screen?
Thanks!!!
Rajesh

May below example give you some idea.
TYPE-POOLS: slis.
DATA: BEGIN OF it_kna1 OCCURS 0,
        kunnr TYPE kna1-kunnr,
        name1 TYPE kna1-name1,
        ort01 TYPE kna1-ort01,
      END OF it_kna1.
DATA: it_fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE.
START-OF-SELECTION.
SELECT kunnr name1 ort01
    FROM kna1 INTO TABLE it_kna1 UP TO 10 ROWS.
END-OF-SELECTION.
WRITE:/ 'Write Statement Display' HOTSPOT ON.
AT LINE-SELECTION.
CLEAR it_fcat.
it_fcat-fieldname = 'KUNNR'.
it_fcat-tabname = 'IT_KNA1'.
it_fcat-seltext_l = 'Customer'.
APPEND it_fcat.
CLEAR it_fcat.
it_fcat-fieldname = 'NAME1'.
it_fcat-tabname = 'IT_KNA1'.
it_fcat-seltext_l = 'Customer Name'.
APPEND it_fcat.
CLEAR it_fcat.
it_fcat-fieldname = 'ORT01'.
it_fcat-tabname = 'IT_KNA1'.
it_fcat-seltext_l = 'City'.
APPEND it_fcat.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program = sy-repid
      it_fieldcat        = it_fcat[]
    TABLES
      t_outtab           = it_kna1[].

How to print selected page no. with smart forms?

Say hello to everybody,
    I just want to print page from 4-6 for example, how can I make it?
    I have a mothod that we can use T-code sp02 to print page 4-6, and it works.
    Is there any other way to make it? Such as setting some parameters for the function of smartforms? Any help, many thanks!

Hi
Printing of pages is controlled only after the generation of spool
though we use the variables &SFSY-PAGE& for page number
to display some data based on page condition, but for printing i think we can't put a condition based on this field.
The way you are doing is the way to do/control page wise printing while printing the spool pages
Reward points for useful Answers
Regards
Anji

Printing Selection-Screen while printing ALV Grid output display

Hi,
I have a requirement wherein I want to print the Selection Screen also while printing the output in simple ALV grid Display.
Currently when I print the ALV output report, only the header and the Body of the ALV is getting printed. But the requirement is that I also want to print Selection screen along with this.
If anyone has faced a similar situation, plz let me know what needs to be done in order to print the selection screen also while printing the ALV report output.
Rgds,
Nitin

Hi,
You can use given function module to print your
selection screen
RS_REFRESH_FROM_SELECTOPTIONS
>This will get Current contents of selection screen
RS_LIST_SELECTION_TABLE
>This will Generates list according to values in selection table(RSPARAMS)
Sample
CALL FUNCTION 'RS_REFRESH_FROM_SELECTOPTIONS'
       EXPORTING
            curr_report     = p_repid
       TABLES
            selection_table = it_int_tab
       EXCEPTIONS
            not_found       = 1
            no_report       = 2
            OTHERS          = 3.
IF sy-subrc EQ 0.
    WRITE:1 'Selection Criteria'(i19),
         /1 sy-uline(18),
         /1 'Variant Name'(i21),
         23 sy-slset.
*-- This function module lists the Selection Screen contents
    CALL FUNCTION 'RS_LIST_SELECTION_TABLE'
         EXPORTING
              report        = p_repid
              seltext       = 'X'
              newpage       = space
         TABLES
              sel_tab       = it_int_tab
         EXCEPTIONS
              sel_tab_empty = 1
              OTHERS        = 2.
Mark all helpful answers

How to Print Selection-Screen along with ALV Report output

Similar Messages

Maybe you are looking for