How to process inbound idoc in R/3 with status 75 - idoc received via qRFC?

Hi gurus,
we are using EOIO for source to R/3, and all the idocs a received in r/3 with this status. But they can't be processed from BD87. How to process these?
Thanks,
Olian
Edited by: Olian Saludew on Sep 11, 2008 11:44 AM

Hi,
Idocs Works on tRFC Queues.
Check this Report to Process Inbound Idocs with Specified Status.
RBDAPP01
Regards
Seshagiri

Similar Messages

  • How to get the stock of STO Report with suppling Plant/receiving Plant/open

    How to get the stock of STO Report with suppling Plant/receiving Plant/open/close qty.

    MB5T gives you Details of STO which have stok in transit.
    ME2W gives you supplying plant wise STO details.  Also in ME2W , in the ALV report output, if you select  the "delivery Schedule line" icon , you will get details such as , STO qty, Issued qty , undelivered qty etc.

  • How To Process Inbound Shipment IDOC of IS-OIL ?

    Hi Expert,
        We are on 4.7E IS-OIL. We have one requirement thru which we are getting the Shipment IDOC from SCM system which is coming to R/3. The IDOC Message Type Which is Flowing From SCM To R/3 is OILSH1 & Basic Type is OILSHI01.
    I want to Know how to Process this IDOC as InBound IDOC in R/3 & create the Shipment Doucment from it in R/3.
    What is the Process Code & Function Module I should use.
    Kindly give me the Step By Step Settings if Possible. like Partner Profile etc.
    Regards,
    Umesh

    Hi,
    Idocs Works on tRFC Queues.
    Check this Report to Process Inbound Idocs with Specified Status.
    RBDAPP01
    Regards
    Seshagiri

  • How to transfer one file to multi sap with same IDOC Type?

    Hi all!
    I need your help..
    My senario is tansfer one xml-file to multi-sap server
    with same IDOC type.
    IS it possible to transfer without BPM?
    I think that the way not using bpm is impossble,
    because the file is deleted by sender adapter.
    If I'm using BPM, how to design?
    I consider 'fork' or 'switch',
    but, I guess,
    Idoc is will be initialized by other branch at last step.
    I hope good information.
    Regards.

    Hi,
    you can create using BPM .
    IR
    you need to create source for one interface and trager for two differnent interfaces.
    suppose if you are doing message mapping in message tab source is one interface targer is multiple interface..so that source can map multiple interfaces...
    create the Interface mapping one source two are target interfaces.
    Create the Integration proces...
    First step is receive step next use the Transformation Step that means source message it will conver two targets...then use the Fork step Recever Determination step goes to the first Send step..
    again drag the another receiver determination and use tge send step..close the FORK step.
    regards,
    venu.

  • IDoc created with status 03 checked via we02, but couldnt find in XI

    Hi all:
        Could you please do me a  favor?  implement a idoc to idoc issue. it has been created successfully .
    as It is found that the idoc created with status of 03 -
    data dispatched to  port ok (rather than 12 dispatch ok). however, I couldn't find  it via SXMB_MONI on XI,  there must be something wrong . coudl you please give me a hint ?
        Thank you very much!!!

    hi,
    you need to check transaction SM58 (remove the user from it) and F8
    it might be the reason that you didn't create a port in IDX1 on XI/PI
    but you will see that in SM58
    Regards,
    Michal Krawczyk

  • How do I fix it :: pictwpstops stopped unexpectedly with status 1

    I get this message only when printing from Quark
    pictwpstops stopped unexpectedly with status 1
    I have deleted and replaced all ppd's and drivers relevant to the Xerox and have re-installed QuarkXpress 6.5 an it still does it I dont't have the problem with any other app, does anyone know how to fix this, it's sending my insane!!!!!!
    [email protected]

    'pictwpstops' stands for 'PICT with PostScript'. PDF is the standard spool file format, but for backward compatability with applications like Quark that generate their own PostScript, the 'pictwpstops' filter is used to create the spool file.
    As has been mentioned in these forums, corrupt Fonts can cause this error as can permissions.
    The first thing I would do is open Disk Utility and run Repair Disk Permissions.
    If the error continues after that has been performed, then look at your Font Book for duplicate fonts (marked with a dot). OS X loads fonts in an order based on the search path, the users library first, then the all users library and then the system library. You might have a case of your user font conflicting with other fonts, especially if you are using a font management utility.
    Regards,
    Paul

  • How to process inbound failed IDOCS

    Hi Guys,
    Actually in outbound idocs are created with one comapny code, but in inbound idocs are failed with  company code is not availabe i.e, menas outbound company code is not availabe in inbound side.
    inbound is production system not allowing our new company code
    Is there any technique to post the failed idocs due to company code in inbound side

    outbound is production system, idocs created in outbound and transfered to inbound , but the problem is after idocs are came to inbound we will try to post with <b>another company code</b> not with existed company code in IDOC

  • How to process inbound process code by populating its value

    hi friends,
    we have created a inbound process code for ticket creation and actualisation, for process an inbound idoc and we need to test by populating values to it
    As i am a newbie to IDOC processing please help me in this regards by giving step by step
    thanks in advance
    S.Janagar

    answered

  • Any batch process to release the sales order with status profile

    Hi,
    The sales manager need to release the sales order 1 by 1.
    This is very tedious.
    Is there a process for her to release selectively?
    For example,
    if the sales value of the order is visible and within the approval limit or too small,
    she could release, says, more than 10 sales order in a single click.
    Possible?????
    Bye

    Hi,
    I like to perform a mass release of multiple Sales order from the proposed custom report.
    I would like to built the releasing coding into the report.
    I need some references on how to set the release.
    Maybe, there is a standard function for me to pass it in and it would release the sales order status.
    if that the case, it is BONUS.
    Otherwise, there must be some steps that need to be built to set the release.
    what I am asking, is there any such routines that would define the steps to release the sales order in coding?
    I understand there would be a change in status aftef the released and it is also vital to enable the audit log for future investigation.
    Having a BAPI would result the audit issue as the system would have taken care of it.
    I hope it is clearer now as to why I am requesting a sample of the standard routine.
    If there is no such routine, do let me be aware of it.
    Thanks

  • IDOC Syntax Error E0072 with status 26 after upgrade to ECC6.0

    Hi
    We have upgraded SAP R/3 from 4.6C to ECC6.0. After upgrade, when we create PO and output EDI, we are seeing this IDOC syntax error E0072 for Mandatory Segment E1EDK01. In 4.6C it was working fine with no issues, only after upgrade this problem started. It says E1EDK01 is missing which is mandatory. We are using basic type ORDERS01 with no extensions. When we see WE30 it looks fine, WE20 settings looks fine.
    Order of the segments got scrambled in upgraded version. First segment is E1EDP19001, this is supposed to be under E1EDP01 segment. There are two E1EDP19001 segments created but there were no sub segments to E1EDP01.
    Any help in this regard is highly appreciated.
    Thanks
    Pandiri

    User Exit activation and fixing the issue in user exit fixed this issue.

  • IDoc received via qRFC

    I have a File - XI branching out into 2 different IDOCs scenario. Everything runs fine in XI and I can see the success falgs but in R/3 the second is always stuck in status 75 with the description as mentioned in the subject. Anybody have a clue as to what could be wrong? All the parameters such as port and partner profiles have been set up...

    hi,
    Troubleshooting File-to-IDOC Scenario in XI
    /people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi
    also see the discussion
    Re: IDoc's not received in XI
    Thanks,
    Vijaya.

  • Idoc to File: Problem with the Idoc

    Hi All,
    I am triggring the Idoc from WE19, I am using an Business Service in the configurations but the tiggred Idoc is going into a business system every time I am sending the Idoc. In SXMB_MONI its showing an error no reciver can be determined for that Business System.
    I am not able to understand whats going on behind and I have also tried using the business system with the same logical system I have created on R/3 but still the same error presists.
    Any clues please let me know
    Thanks and Regards,
    Srikanth

    Hi Ashish,
    This is the error:
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Receiver Grouping
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_ASYNC</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>No receiver could be determined</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    Thanks,
    Srikanth

  • How to cancel messages in SXMB_MONI with status "No receive found"

    Dear All,
    I need to cancel message with error status as mentioned in captioned subject.
    Can you please guide me how to do it?
    Regards,
    Saras Jain

    One more thing to check.....confirm if there is any background job scheduled to cnacel the message once it goes into error....if it is cancelled in this manner...if so you wont be allowed to cancel the (already cancelled) message manually
    Regards,
    Abhishek.

  • How to delete a PS network with status 'Technically Completed' (TECO)?

    Dear all,
    We have Webdynpro application, which will create a PS network in background. In the past it was working fine and many PS network  are created. Now we have a scenario where some of the networks which are with status 'Technically Completed' (TECO) needs to be deleted from system. I tried to delete it from CJ20N, but it was not possible as the status is set to TECO. Please let me know how to delete a PS network which is with status 'Technically Completed'  (TECO).
    Thanks in advance.
    Regards,
    Vijay

    The cluster goes out and finds all networks that are available.  This is an automatic process.  As long as there is a network there, it will show it.  If you don't want it to show, disable the interface and it will disappear.
    . : | : . : | : . tim
    Thanks a million Tim! Disabling the correct interface made it disappear!
    Actually, I had disabled the interface before I started this thread. When you posted the suggestion, I went back and looked at the network connections again and found out that I had disabled the wrong interface! My bad!
    However, here is the interesting thing:
    After I disabled the NIC and it disappeared from the FCM I physically disconnected its cable (actually I disconnected all unused / unconfigured NICs) ....then I re-enabled it. Now I see that FCM does NOT pick it up again.
    I think FCM picked up those NICs because at one time I had put that NIC in the production VLAN (from the switch side).
    One observation:
    If you have NICs in a HV machine which are not connected to a switch, they do NOT show up in FCM. Once you connect them to some network, they start showing up. I guess by connecting them to a network, they are able to see NICs in other HV nodes.
    Take a look at this screenshot. I have 6 NICs in there which are disconnected, none show up in FCM
    -Rajeev rajdude.com

  • IDOCs in trfc with status text as error

    Hi,
    I have IDOCs in trfc queue with status text as 'The ABAP/4 Open SQL array insert results in duplicate database records'.
    How to reach this error point and rectify the same.
    Regards,
    Sheetal

    Hi Sheetal,
    Please refer the link,
    Successfully posted IDOC from XI but not reflected in Receiver R/3 system
    Best Regards.
    Reward points if it is useful.

Maybe you are looking for

  • My Macbook Pro seems to be having problems updating software or connecting to apples servers for updates.

    Hi, I am having an issue at the moment with my MacBook Pro updating anything! Here is a list of the problems I'm getting. - App store is not loading correctly and cannot navigate or select updates for my programs/apps installed on my computer (see ph

  • Blue Screen after installing WRT600N

    I have been running two wired high-end machines for over a year with an old Linksys 10/100 wired and wireless B Router.  I wanted to get the wired and wireless speed a bit faster so I bought the WRT600N mainly for the Gigabit switch and the USB port.

  • Update idvd and no themes for 6 and 7 works...

    All the themes are in the library on the "themes" folder, all themes for 1 through 7 in separate folders iside themes, but idvd only shows themes of the 05... please help! I have no themes for 16:9 only 4:3 I just bought an apple mini and update idvd

  • Control key not working after repair

    I took my macbook in over the weekend to the genius bar for them to look at the display hinge, from the paperwork it looks like in addition to replacing the display they also replaced the logic board and the wifi card. I got the laptop home and the c

  • S16 24fps - DVCPro HD 25 fps -   24 fps editing and output?

    I'm new on this forum so "hi everybody!" We're about to shoot a short feature on S16 film and I'm in charge of postproduction. Last feature we made was shot on S16@24 fps -> HDCam SR telecine -> Betacam SP -> 24fps edit on Avid Film Composer -> EDL -