How to properly sync own video files with played / unplayed state?

Since iOS7 (I think) the Videos app on iOS is no longer showing the "unplayed" blue dot next to a movie files that I have added manually to iTunes.
In old iTunes versions, at least iTunes showed me inside the library view which movie files had been played with the blue dot.
Now with the Yosemite Upgrade and new iTunes, when I go to "Movies" (left hand side icon) then on the middle section on "Home Videos" then I get my old listing of video files, but there is no played/unplayed state icon. There is a column "Plays" and "Last Played", but those do not indicate if the video was watched fully or only just a second of it.
When going to my iPhone sync view however, the seen/unseed blue dots do show up. But in that view, I cannot delete video files. Usually I delete videos files after I watched them, and currently it is impossible for me to delete the video files, as I cannot see which ones are seen. Plus, on the iOS Video app in iOS 8.1, I still cannot see which videos were played - on top of that, when I delete a video file from there, and sync my iphone, it actually copies the video file to the iPhone again :-(
Any thoughts, apart from "Dude you have a wacked workflow"? ;-)

Hi,
in relation to on to the above could you please share some thoughts on using AUSST in an enterprise environment spread over 50 countries i relation how to setup the AUSST, taking WAN Lines into considerations. We are using SCCM for application deployment and patching. Is there a comparising model for AUSST vs. SCCM?
i Get the picture using AUSST in a company with one huge Building using the LAN capacity, but what technologies are used to replicate over WAN etc?
br
Twinkle6862

Similar Messages

  • I have all my music on an external hard drive. I just transferred all my files to a new hard drive . How do I sync all my files with my itunes library without losing all my playlists etc and keep everything intact?

    I have all my music on an external hard drive. I just transferred all my files to a new hard drive . How do I sync all my files with my itunes library without losing all my playlists etc and keep everything intact?

    Launch iTunes with the Option key held down, click on Choose Library, and specify it. If the external drive doesn't contain the iTunes database files, create a new library there and import that music.
    If the library contains any rented movies, they won't play on a different computer.
    (109334)

  • How do I replace one video file with another

    Hey all
    I'm new to Imovie, so please bare over with me.
    I made a long movie using a MOD format file from my JVC home camera
    When I where to convert or burn the movie in Imovie it made an error.
    After much trouble I found out that it was the MOD format that was the problem
    So I bought an expensive piece of software that converted the MOD file to MOV:
    And with a new test project it now works flawless...
    Anyways back to the original project and the problem:
    - I have now converted the original MOD file to MOV
    - I have the original Imovie project with the MOD file.
    How do I replace the mod file in the imovie project with the new mov file, while keeping, that is transfering all my work on the mod file over to the new mov file?
    Thnx
    Kris

    • In the Layers Panel draw the Layer’s Vector Mask icon onto the trashcan-icon
    • move that Layer above the new Text Layer
    • invoke Create Clipping Mask (command-alt-G) from Layers Panel’s fly-out menu or alt-click on the line separating the two Layers’ icons

  • How can i get a video file with subtitle out of DVD Studio Pro?

    i got a project for a dvd in dvd studio pro. There are subtitles which i created within dvd studio pro.
    Now i want make a web version of the video with the subtitle, how can i get to this?

    Hi Mr. Cutter,
    There is an app called "D-Subtitler for Mac" (as well as several others)
    which should allow you to extract the subtitles from a copy of the
    finished dvd and use them otherwise.
    It's been awhile since I had to do it but it is a fairly common need
    so the software exists.
    J>H<L

  • How to make a mpeg4 video file with an .avi extention

    Can anybody tell me how to do this with Quicktime Pro, Final Cut Pro, or something else?
    Thanks.

    Hi All,
    What I thought to develop is to write a JDBC connection in the Stan-alone PDF template and access database.
    example: PDF is designed in such a way that it should have "USERNAME" , "PASSWORD" , "LOGIN BUTTON" , so that PDF stand-alone template on every desktop should access the database on entering the correct credentials.
    is it possible..?
    if possible , please provite the solution..?

  • How do I get Elements 13 64 bit to play .mts video files with sound as they do in Elements 11 32 bit?

    I have upgraded to Elements 13 64 bit from Elements 11 32 bit and .mts video files now play without sound - they still play perfectly with sound on Elements 11 32 bit.
    Is there something that needs to be changed to get Elements 13 to play them with sound or have Adope simply hooped .mts playback in Elements 13 64 bit?
    I am running on Windows 8.1 Professional with Media Centre on a Dell XPS15 and have Elements 13 64 bit and Elements 11 32 bit installed.
    Adobe, how do I get the support that is supposed to be available for 90 days after activation?

    Hello jl666,
    I have noticed the same issue having upgraded to PSE13 64bit from PSE9 on Windows 7.  This has been reported to Adobe in several forum threads and I have myself tried on three occasions to get Adobe Technical Support to acknowledge or respond to this issue, so far without any success. 
    Despite the fact that Adobe publically claims to support this format, I was told in my last chat with their technical support that I should buy Premiere Pro and that Elements has never and does not support any video data...
    Unterstützte Dateiformate | Premiere Elements, Photoshop Elements
    Here is my chat transcript which I attach in the hope that someone from Adobe will take this issue seriously and work towards providing a fix.
    Sanyogita: Hello. Welcome to Adobe Technical Support.
    Jon Barber: .MTS files no longer play with sound. .DV files no longer play at all.
    Jon Barber: Hello
    Sanyogita: One moment while I look up your customer record.
    Sanyogita: Please allow me a moment to search for the information.
    Jon Barber: ok
    Sanyogita: I can see you have PSE 13
    Jon Barber: Correct and previously PSE 9 where everything worked fine...
    Sanyogita: MAy I know which application are you using for >MTS files
    Sanyogita: .MTS files
    Jon Barber: This issue is mentioned in various threads in your forums as well, but no response or solution from adobe yet
    Jon Barber: Organiser just double clicking on the file to play it. They play, but with no sound. When I play them in Windows the sound is correctly played
    Sanyogita: In PSE 13 there is no provision of playing videos with sound
    Sanyogita: You need premiere pro to play videos with sound
    Jon Barber: Other formats are correctly played with sound. 
    Jon Barber: Please tell me why I have paid €80 to upgrade from PSE9 to get worse functionality then!
    Jon Barber: This is nonsense!
    Sanyogita: You should purchase Premiere pro for videos
    Sanyogita: PSE 13 is only for photos
    Jon Barber: Complete nonsense and not advertised in your documentation. Are you trying to tell me that no video files play with sound, because that is simply not true!
    Sanyogita: Please purchase Premiere elements for videos
    Jon Barber: Adobe sucks - I will pass your comments onto the appropriate forum threads and hope that other customers also let you know how they feel about this reduction in functionality from previous versions.
    Sanyogita: previous versions of PSE never supported video application
    Jon Barber: You are misinformed. These videos work fine on PSE 9 and most files still work on PSE13, just .MTS files have no sound
    Sanyogita: I am sorry ,I am not an expertise in this product
    Sanyogita: Let me connect you to that team
    Jon Barber: Yes,I can tell that - perhaps you could pass this open bug onto someone who does
    Jon Barber: Please do not close this bug - I am getting annoyed at having to reopen it
    Sanyogita: Please stay online I will transfer your chat now
    Jon Barber: ok thank you
    info: Please wait while I transfer the chat to the appropriate group.
    info: You are now chatting with Jayita Sen.
    Jayita Sen: Hello. Welcome to Adobe Technical Support.
    Jayita Sen: Please allow me a moment while I look into your account & verify the details.
    Jon Barber: Hello
    Jayita Sen: John we only support download &  first installation of PSE 13
    Jayita Sen: please contact the forums for further support
    Jon Barber: This issue is mentioned in several forums and no solution has so far been forthcoming from Adobe.
    Jon Barber: I paid €80 to upgrade from PSE9 and now have worse functionality than before and now you are telling me you cannot help. Is that what Adobe considers customer support?!
    Jon Barber: By the way I did recently download and initally install PSE13 so according to your rules you should provide support.
    Jayita Sen: Jon we don't support "Unexpected behaviours or how to issues"
    Jayita Sen: only forums support it
    Jon Barber: This is not a 'how to issue', it is a bug!
    Jon Barber: It is functionality that previously worked and no longer does. I am not requiring lessons in how to use the system, just trying to do something that already worked in previous versions.
    Jon Barber: Frankly I find these support responses from Adobe shocking. What I expect to hear from you is 'thank you for highlighting this issue, we will work on finding a solution and get back to you and others with the same problem in the customer forums" Not an extraordinary set of excuses for poor software.
    Jayita Sen: I am sorry Jon...but forums is where you can only get the support
    Jon Barber: Customers having to help customers since clearly no-one at Adobe has a clue about their own product. How many customers do you expect to have in 12 months with this service?
    Jon Barber: Goodbye - please contact me if you are geniunely interested in helping your customers rather than fobbing them off with excuses.

  • How can I sync a .mov file of a home-made video?

    How can I sync a .mov file of a home-made video?

    Another way. You can use a USB flash drive & the camera connection kit.
    Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
    Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
    Secrets of the iPad Camera Connection Kit
    http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
     Cheers, Tom

  • How do u out your own video files on the ipad?

    How do u put your own video files on the ipad and once u have done it where do u look to find it to play

    You load them into iTunes and then sync them to your iPad. You'll then find them in the Video app. For detailed information, consult the iPad User Guide; the sections on Synching and Videos will be most applicable. Then if you have specific questions, post back and we can help further.
    Regards.

  • How do i make a still image (photo) fit the length of the music? I record music and want to put the tracks to a video file with a still image of my business logo in the background. Any help?

    How do I make a still image (photo) fit the length of the music? I record music and want to convert the tracks to a video file with a still image of my business logo in the background. On windows movie maker you could just select "fit to music" but this program isnt as easy to figure out! Any help?

    Double-click on the still image in the project timeline to open the Inspector. In the Inspector, adjust the duration by typing in a new duration to match the length of your music. I think the limit for a still image is 10 minutes. If you need more than this, simply drag the image into the timeline again then adjust its duration. The two images will play seamlessly (no gap will be visible).
    See this iMovie Help topic:
    http://help.apple.com/imovie/#mov3a883915
    You can achieve more precision when entering durations by changing a preference in the menu item iMovie Preferences. Check (tick) the preference for Show Time As HH:MM:SS:frames. This will enable you to enter the duration of stills down to the frame level, rather than full seconds (NTSC is 30 frames per second; PAL is 25 fps). When entering times, type a colon between each time segment, such as 2:50:15, which represents 2 minutes 50 seconds and 15 frames. For 5 seconds 20 frames you would enter 5:20 and so forth.
    Note that the music will only run to the length of the video in the timeline (in your case, the still images). So, after increasing the stills duration you will need to drag the end of the music track as far as required. The stills can be dragged inwards to reduce the duration if necessary.
    John
    Message was edited by: John Cogdell - added Note

  • How can i make a picture from a video file with final cut pro x?

    how can i make a picture from a video file with final cut pro x?

    Go to the "share" menu, select "save current frame"

  • Work flow for syncing separate Audio files with Video files in FCP

    It may be too late for me to use this workflow that I want with my current project, but I need to figure out what it is anyway for future reference.
    Right now I'm editing a movie which is near completion. When we recorded the movie, the camera's deck recorded reference audio from the sound guy at 48k @ 16bit. This audio also went through an additional set of preamps which added a small amount of noise. So we don't want to use the reference audio because of it's low resolution and less clean audio. The sound guy recorded straight to his deck at 48k @ 24bit, besides the better resolution, his audio is noticeably better.
    The camera deck and 'clapper' (I think that's what you call it) were not connected or synced. So the video files and the soundsguy's audio files are slightly different lengths, but at least have a 'clap sound' to manually sync to. And I don't mean that the audio and video files won't play in sync with each other, I mean that the soundguy always started recording before the camera, so his audio files have slightly different start and stop times.
    Could I have synced the audio files with the video files before I started editing this project? If so, could it have been in the way that the soundguy's audio would be connected to my video files while editing? What would that procedure have been?
    My current workflow right now is I have my finished sequence, I change the bit rate to 24 in Sequence Settings, and start manually dragging the soundguy's files to the sequence for every little edited clip. This is going to take forever, there are 99 scenes in this movie. Anyway, at the end of the day these sequences are exported as .omf files and imported into Pro Tools for audio post production.
    I was not thinking to figure this out before I started editing the movie, this is unfortunate, a newb move in a decent production.
    Anyway, I don't know if there is a standard for this situation or if I just opened up a can of worms for many possible workflows. Please comment if you have experience in this area or please refer me to any reading material.
    Thanks for your time!
    -Monty

    The normal workflow (besides manually syncing up before editing!)
    is to have ' some ' way of auto syncing the clips.
    So you must have common timecode.
    With external audio, you can slave the cam's TC to the TC output of the BWF recorder.
    Then you can use BWF / QT merge (one of my apps) to sync them, or use Sync 'n Link.
    (another third party application)
    If it is not possible cause you're shooting with a cam without a TC input, you can record the TC output on one of the audio tracks of your cam, and use FCPauxTC reader to decode the beeps and translate that to QT TC, and again use the former tricks to sync them.
    It is difficult when you have never done it, but very easy once you get the hang of it, and it saves a huge amount of time to do it right from the start.
    Have a look at the FCP aux TC reader here:
    http://www.videotoolshed.com/?page=products&pID=26
    Sync 'n Link can be found here:
    http://www.assistedediting.com/Sync-N-Link/
    /// disclaimer, i AM the owner of Videotoolshed, and i WILL (at least try) to make money on it. ///
    /// i do NOT have any relation with AssistedEditing.com, besides friendship with the owner. ///

  • I have a problem with the mac can not read video files with the extension IMOD. How can I solve this problem?

    I have a problem with the mac can not read video files with the extension IMOD. How can I solve this problem?

    By doing a Google search. 

  • Sync video files with Lr Mobile

    Another wish is uour command is the syncing of VIDEO files for Lr Mobile. It would be great if this comes true in a next update .....
    TIA!
    Baldwin

    Hi Franxperience,
    Could you please send me a LR Desktop diagnostig log  - best as a private message with a downloadable dropbox link.
    You can trigger the log via LR Desktop prefereneces -> Lightroom Mobile and when you hold down the alt key you will notice a generate diagnostic log button
    Thanks
    Guido

  • How would I sync MPEG4 videos to the iPad

    How would I sync MPEG4 videos to the iPad

    As long as they meet the iPad's supported video formats then you should be able to sync them via iTunes. From http://www.apple.com/ipad/specs/ :
    Video formats supported: H.264 video up to 720p, 30 frames per second, Main Profile level 3.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
    If you can't get them into iTunes then you can use something like Handbrake to convert them into a supported format. If you can get them into iTunes but they then won't sync to the iPad then try Advanced > Create iPad Version in iTunes and then try syncing that version.

  • How do you sync itunes purchased files to mophie spacepack

    how do you sync itunes purchased files to mophie spacepack

    Download the app, then watch the video that comes with the app.

Maybe you are looking for