How to provide select-option in module pool programming

Hi all,
How to provide select-option in module pool programming.
If any body knows let me immediately.
Thanks
sudheer

Hi Sudheer,
Unfortunately there is no standard way of having a select-option in a module pool program.
What you can try is having two fields and creating a range in your program and populating the range at runtime with respective value and trying to simulate some functionality of the select-option.
Hope it helps.
Thanks, Debasish

Similar Messages

How to create select-options in module pool program

Hi
i am structed at this point could you please tell me
how to create select-options in module pool program

Steps to get SELECT-OPTIONS in module pool programs.
<li>. Start one dialog program with SAPZ_TEST.
<li>. Place the below code in the TOP include of the dialog program.
PROGRAM SAPMZ_TEST.
TABLES mara.
SELECTION-SCREEN BEGIN OF SCREEN 2100 AS SUBSCREEN.
SELECT-OPTIONS: matnr FOR mara-matnr.
SELECTION-SCREEN END OF SCREEN 2100.
<li>. Create one screen 2000 .
<li>. Go to Layout of the screen and Define subscreen area on the screen and Name it as g_subscreen.
<li>. Place the below code in the Flow logic of the screen.
PROCESS BEFORE OUTPUT.
CALL SUBSCREEN g_subscreen INCLUDING 'SAPMZ_TEST' '2100'.
PROCESS AFTER INPUT.
CALL SUBSCREEN g_subscreen.
<li>. Activate all.
<li>. Create Transaction code for the dialog program SAPZ_TEST.
<li>. Execute the transaction code. You will see the select-option like we see on Selection-screen.
I hope that it gets u clear idea.
Thanks
Venkat.O

How to creat select-option on module pool screen???

Hi All,
please tell me how to creat select-option on module pool screen???
Regards
Deepak

Hi Deepak Kumar Sharma,
There are Two ways to achieve it...
1) How to create a select-options in a module pool screen.
Method 1
a) Create a subscreen area in your screen layout where you want to create the select options.
b) In the top include of your module pool program declare a selection screen as a subscreen e.g.
SELECTION-SCREEN BEGIN OF SCREEN 100 AS SUBSCREEN.
select-options s_matnr for mara-matnr.
SELECTION-SCREEN END OF SCREEN.
c) In the PBO and PAI of the main screen where the select options needs to be created do a call subscreen of the above screen (100).
CALL SUBCREEN sub_area INCLUDING <program> <screen>
This call subscreen statement is necessary for transport of values between screen and program.
Note: All validations of the selection screen fields e.g. the s_matnr field created above should be done in selection screen events like AT SELECTION-SCREEN etc and not in PAI. These selection screen validations etc should be done in the top include only.
Method 2
a) Create 2 separate fields in your screen layout - one for the low value and one for the high value. Insert an icon beside the high value which will call the multiple selections popup screen on user command. Use function module COMPLEX_SELECTIONS_DIALOG to achieve this.
struc_tab_and_field-fieldname = con_cust. " 'KUNNR'
struc_tab_and_field-tablename = con_kna1. " 'KNA1'.
CALL FUNCTION 'COMPLEX_SELECTIONS_DIALOG'
EXPORTING
TITLE = ' '
text = g_titl1 " 'Customers'
tab_and_field = struc_tab_and_field
TABLES
RANGE = rng_kunnr
EXCEPTIONS
NO_RANGE_TAB = 1
CANCELLED = 2
INTERNAL_ERROR = 3
INVALID_FIELDNAME = 4
OTHERS = 5.
IF NOT rng_kunnr[] IS INITIAL.
Read the very first entry of the range table and pass it to
dynpro screen field
READ TABLE rng_kunnr INDEX 1.
IF sy-subrc = 0.
g_cust = rng_kunnr-low.
ENDIF.
You can use the return table rng_kunnr to populate your own internal range table with the values entered by the user. Basically here you are just simulating the work of a select-options parameter by module pool screen elements.
Also have a look on below threads
how to make select option in module pool
select option in module pool program
Hope it will solve your problem..
Thanks & Regards
ilesh 24x7

How to make select option in module pool

Hello,
Can anybody tell me how to create a select option in module pool screen..?
thanks

Easiest way is to create a subscreen and embed this in your dynpro.
report zrich_0006 .
tables: mara.
* Custom Selection Screen 1010
selection-screen begin of screen 1010 as subscreen.
selection-screen begin of block b1 with frame title text-001.
parameters: p_rad1 radiobutton group grp1 default 'X',
            p_rad2 radiobutton group grp1,
            p_rad3 radiobutton group grp1.
select-options: s_matnr for mara-matnr,
                s_matkl for mara-matkl,
                s_mtart for mara-mtart.
selection-screen end of block b1.
selection-screen end of screen 1010.
start-of-selection.
call screen 100.
*&      Module STATUS_0100 OUTPUT
module status_0100 output.
* SET PF-STATUS 'xxxxxxxx'.
* SET TITLEBAR 'xxx'.
endmodule.
*&      Module USER_COMMAND_0100 INPUT
module user_command_0100 input.
endmodule.
* Screen screen 100 with a subscreen area called "subscreen_1010"
* Screen Flow Logic follows
*process before output.
* module status_0100.
* call subscreen subscreen_1010 including sy-repid '1010'.
*process after input.
* call subscreen subscreen_1010 .
* module user_command_0100.
Regards,
Rich Heilman

Select option in module pool program

Hi,
I have develop a module pool program. In one of the screen i need select option. so do any one have idea or approach for it.
Thanks in advance.

Hi,
try the following code
tables : mard.
data : ok_code_100 type sy-ucomm.
selection-screen begin of screen 1010 as subscreen.
selection-screen begin of block b1 with frame title text-001.
select-options: s_werks for mard-werks,
s_lgort for mard-lgort.
parameters : p_var like disvariant-variant.
parameter: p_rb1 radiobutton group rd1 default 'X', " list
p_rb2 radiobutton group rd1. " grid
selection-screen end of block b1.
selection-screen end of screen 1010.
start-of-selection.
CALL SCREEN 100.
*& Module STATUS_0100 OUTPUT
text
module status_0100 output.
set pf-status 'Z11_SUBMIT'.
set titlebar 'CALL'.
endmodule. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
text
module user_command_0100 input.
case ok_code_100.
when 'EXIT'.
leave program.
when 'SUBM'.
submit z11_ap_alv_mat using
selection-screen '1000'
with s_plant in s_werks
with s_stor in s_lgort
with p_var = p_var
with p_rb_01 = p_rb1
with p_rb_02 = p_rb2
and return.
endcase.
endmodule. " USER_COMMAND_0100 INPUT
here u have to design a subscreen area SUB_1010 in the screen painter, there is a option given there for that.
and also in the flow logic of screen 0100 you have to call the subscreen SUB_1010 both in PBO and PAI like :
process before output.
module status_0100.
call subscreen sub_1010 including sy-repid '1010'.
process after input.
call subscreen sub_1010.
module user_command_0100.
reward if helpful

Select-options in module pool programming

hi,
I need to have four fields as part of my layout that are select-options fields with multiple values entry options. Since layout doesnt have 'select-options" functionality, i defined it from the module pool program, ie: I wrote a selection screen in the PBO module. The problem is if i make any changes to the code, the layout changes back to the previuos format.
Is there any way in which i can combine selection-screen logic with my layout.
Thanks,
Sruthy

HI
GOOD
Selection Screen Version
Only for Executable Programs
If you do not specify a selection screen version, the system automatically creates a selection screen based on the selection criteria of the logical database and the parameters and select-options statements in the program.
If you want to use a different selection screen of the logical database, enter a number in this field. The number must be smaller than 1000 and correspond to an additional selection screen of the logical database. The possible values help displays a list of available selection screens. You can also look in the selection include of the logical database (program DBxxxSEL, where xxx is the name of the logical database).
Tomislav
1. In the top include define the selection screen with
selection-screen begin of screen 9250 as subscreen.
SELECT-OPTIONS analyt FOR ztv_cc02-zd_mumla .
selection-screen end of screen 9250.
2. Using the screen painter create a subscreen area in
the main screen where you want to have this.
3. Then, in the screen flow logic code as follows:
PROCESS BEFORE OUTPUT.
MODULE STATUS_1000. etc
call subscreen SUB1 including 'PROGRAM NAME' '9250'.
PROCESS AFTER INPUT.
module exit at exit-command. etc.
call subscreen SUB1.
THANKS
MRUTYUN

Problem in Select-option in Module Pool Programming

Hi,
I'm making one module pool programming. In that, I've to make select-option. For that I'm using this command --
1) In PBO --
CALL SUBSCREEN sub INCLUDING 'YBOE_PRINT' '5100'.
2) In PAI --
CALL SUBSCREEN sub.
But, Syntax Error is generated as below --
"." or "ID.........FIELD" expected after "SUBSCREEN"
Please suggest.
Thanks.
Kumar Saurav.

Hi Ramchander,
Thanks for replying. But, even if I changed Prog_Name with term 'repid', that same error regarding
"." or "ID ... FIELD ..." expected after "SUBSCREEN"
is coming up.
I guess, there is any step missing.
Lemme describe what I'm doing in points --
1) I declared SELECTION-SCREEN with screen no --
SELECTION-SCREEN BEGIN OF SCREEN 5100 AS SUBSCREEN.
      PARAMETERS : p_bukrs TYPE ekko-bukrs OBLIGATORY DEFAULT '1000'.
      SELECT-OPTIONS: kunnr FOR kna1-kunnr.
      select-options: gjahr for bsid-gjahr.
      select-options: bank for bsed-bank.
      select-options: budat for bsid-budat.
      SELECTION-SCREEN END OF SCREEN 5100.
2) Then I made a call in PBO as given above.
3) Finally, a call to that subscreen is made in PAI - again as given above.
When I checked that, this gave the error.
Are you looking any erroneous step ...?
Please guide.
Thanks.
Kumar Saurav.

How to create select-options on module pool screen

Hi all
I want get a range of values from the user from the module pool screen.
Is there any element available on module pool screen like select options on the selection screen of reports.
reply me ASAS.
Thanks.

hi krishna
actually I want to display the details of PO numbers from 45000100 to 45000150. user will enter this range on the module pool screen just as we enter on the selection screen of report. My question is do we have a button like select-option on the module pool screen.
Plz . reply me ASAP.
Thanks.

Getting select options in module pool screen

hi experts,
can any one suggest me how to provide select options in module pool screen.
thank you,
regards
vijay

Hi,
Take two fields on screen first for low value and other for high value (say vbeln_low and vbeln_high) also design a button next to the high textbox for select-option button used to display popup.
Using these two input fields append a range (say r_vbeln for vbap-vbeln) for the field to be used (either in query or anywhere).
ranges : r_vbeln for vbap-vbeln.
IF NOT vbeln_high IS INITIAL.
 IF NOT vbeln_low LE vbeln_high.
 MESSAGE e899 WITH text-007. "high value is smaller than low value
 ENDIF.
ENDIF.
r_vbeln-sign = 'I'.
r_vbeln-low = vbeln_low.
IF vbeln_high IS INITIAL.
 r_vbeln-option = 'EQ'. "if user takes only a singlr value
ELSE.
 r_vbeln-option = 'BT'. "if user takes both low & high value
 r_vbeln-high = vbeln_high.
ENDIF.
APPEND r_vbeln. "append range
CLEAR r_vbeln.
On the button click call this FM to call a popup for select-options.
DATA : tab TYPE rstabfield.
tab-tablename = 'VBAP'.
tab-fieldname = 'VBELN'.
CALL FUNCTION 'COMPLEX_SELECTIONS_DIALOG'
 EXPORTING
 title = text-002
 text = ' '
 signed = 'X'
* lower_case = ' '
* no_interval_check = ' '
* just_display = ' '
* just_incl = ' '
* excluded_options =
* description =
* help_field =
* search_help =
 tab_and_field = tab
 TABLES
 range = r_vbeln
 EXCEPTIONS
 no_range_tab = 1
 cancelled = 2
 internal_error = 3
 invalid_fieldname = 4
 OTHERS = 5.
IF sy-subrc EQ 2.
 MESSAGE s899 WITH text-003. "no value selected
ELSEIF sy-subrc <> 0 AND sy-subrc <> 2.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
This whole code will append your range r_vbeln to be used in program.
Hope this solves your problem.
Thanks & Regards,
Tarun Gambhir

How to attach FCODE to select option in Module Pool

Hi all,
 I have created Select option in Module pool by attaching a Subscreen. Now when user enters any value into the select option I need to fetch values from the database in to the table control based on the value entered in select option.
Is it possible and how?
Thanks.

Hi
If u have one select options in module pool programming,Then there is no need for FCODE
bcoz FCODE is needed for push button,check box..like etc.
But select option is a input field.
So u can trace the input as u have done in report
Like
select * from dtab1 into corresponding fields of table itab where field1 in selectoption.
Or if u want that program to be executed after giving input in select option then user will press F8
So Use FCODE 'F8'.
Regs
Manas Ranjan Panda
Message was edited by:
 MANAS PANDA
Message was edited by:
 MANAS PANDA

Select Option on Module Pool screen

How to display select options on Module Pool screen ?

Via the search functionality, you will find something like :
SELECTION-SCREEN BEGIN OF SCREEN 101 AS SUBSCREEN.
SELECT-OPTIONS: S_CARRID FOR SPFLI-CARRID,
S_CONNID FOR SPFLI-CONNID.
SELECTION-SCREEN END OF SCREEN 101.
and to use a CALL SELECTION-SCREEN xxxx in your module pool.
regards,
Hans

Select option in module pool

Hi friends,
I have to create select options in module pool programming. Using subscreens i have created select option.
But if i enter some value and if i press enter then the value is clearing automatically. I am not able to
capture the values. Can any body help on this?
Thanks a lot in advance.

HI Ramesh,
The data in table control will get refreshed automatically once action was performed. Capture the values by assigning them to the internal table in PAI. You can use the values stored in internal tables.
Thanks,
Ravi Kanth.

To create select option in module pool prograaming.

I want to create Select-option in module pool programming like a report where i want to enter range in my dialog screen.
Can anybody suggest me...with coding
thanks
kumar n

It is possible .
you can do that using COMPLEX_SELECTIONS_DIALOG mentioned by me or
using the Subscreen approach mentioned by Rich in the below thread..
https://forums.sdn.sap.com/click.jspa?searchID=15000207&messageID=1501162

How can i decleare select-options in module pool table control?

Hi everybody!!
Can anyone tell me how can I decleare select-options in module pool table control screen?. I have declared it in a screen with a table control but a dump is triggered due to an error when generating the selection screen.
Regards...

My suggestion will be try to use fm
call function 'FREE_SELECTIONS_DIALOG'
Please search this forum you can find lot of threads related to this.
a®

How to get calender in f4 help for select options in module pool (URGENT)

Hi All,
how to get calender in f4 help for select options in module pool
Please help .
Thanx in advance,
amruta

Hi Amruta,
First of all, you can not create select-options directly in module pool.
For creating select-option is dialog prog follow these steps:
1. create your selection screen model as subscreen by:
SELECTION-SCREEN BEGIN OF SCREEN 2000 AS SUBSCREEN.
PARAMETRS: P_MATNR LIKE MARA-MATNR.
SELECT-OPTIONS: S_BISMAT FOR MARA-BISMAT.
SELECTION-SCREEN END OF SCREEN 2000.
2. create a screen ( example 100 ) in your module-pool dedicated for selection-screen. on this screen layout sketch a sub-screen name like subscree_2000.
3. write this bit of code in PBO and PAI of the screen 100;
CALL SUBSCREEN SUBSCREEN_2000.
4. include this code in PBO:
INCLUDING SY-REPID '2000'
6. write user_command of PAI, call screen which is going to executable after selection-screen.
5. create a transcation for this dialog module pool with screen 100.
6. execute this transaction and you can see it's behaving like cool with select-options.
After that in [bprocee on value-request], use F4_DATE for both from and to option field.
Hope it will solve the problem.
Regards
Krishnendu

How to provide select-option in module pool programming

Similar Messages

Maybe you are looking for