How to publish a File Content Item via EDK?

I'm trying to publish a "File Content Item" via the EDK.
CS EXPLORER
Recall, that a "File Content Item" is different than a (regular) "Content Item" in that (via CS Explorer) it's a content item with no user-defined data entry template (when you right-click, the "Edit Data Entry Template..." menu item is not listed). Yet, somehow, it can still be published (via the Explorer), --which is great because I need to FTP this file to another server.
EDK
However, even though the (file) content item's EDK "Publishable" property indicates "true", it cannot be published via the IContentItemManager.PublishContentItem() method, which is returning the following error message...
The required object was not found... content item... containing Data Entry Template... with attached Presentation Template (with UUID null)... (DataItemUuidNotFound...)
In other words, the File Content Item has a (system defined) "/Definitions/File" data entry template, which has no attached presentation template. This leads me to believe that File Content Items are published differently (than Content Items).
Or, is there a flag that I can pass along to "file_upload.jsp" to get it to auto-publish the File Content Item it creates?
thanks,
Michael

Hey there,
Animate doesn't publish to HTTPS, but this is something you can control on your own when uploading to a secure server. Also be aware that the Animate runtime is served over HTTP so you'll have to upload this component to serve from your server as well.
Sarah

Similar Messages

  • Create File Content Item

    Hello,
    To create a File Content Item in Content server, I know a small blue box will pop up to allow you upload a file from your local drive. When the box is loading, I can see it access a link. But I cannot right click the box to view its properties to get the address after it is load. I need to open (access) this blue box in my portlet. My question is how I can directly call or open this box using EDK in portlet. What is the basic url for this box if I know the folder that I will save my file.
    Thanks in advance

    Thanks for your help!
    I tried using SetFilePropertyValue(). It looks like it is the same as SetImagePropertyValue(). You have to upload the file to portlet server first and then using the SetFilePropertyValue() to upload it to Content server. We can not open our portlet server to let everyone upload file to it.
    Now I have to create a content item with a long text field first, and then using ContentItem.editorURL to open the content item edit window. User can upload image file by clicking from there.
    Please let me know if you have a better way.
    Thanks again!

  • How to read trace file content

    Hi,
    DB :11.2
    How to read trace file content.It's only for ORACLE SUPPORT?
    calling         
    call
    entry           
    argument values in hex
    location        
    type
    point           
    (? means dubious value)
    ksedst()+31     
    call
    ksedst1()       
    000000000 ? 000000001 ?
    7FFF19B98CA0 ? 7FFF19B98D00 ?
    7FFF19B98C40 ? 000000000 ?
    ksedmp()+610    
    call
    ksedst()        
    000000000 ? 000000001 ?
    7FFF19B98CA0 ? 7FFF19B98D00 ?
    7FFF19B98C40 ? 000000000 ?
    ksfdmp()+21     
    call
    ksedmp()        
    000000003 ? 000000001 ?
    7FFF19B98CA0 ? 7FFF19B98D00 ?
    7FFF19B98C40 ? 000000000 ?
    kgerinv()+161   
    call
    ksfdmp()        
    000000003 ? 000000001 ?
    7FFF19B98CA0 ? 7FFF19B98D00 ?
    7FFF19B98C40 ? 000000000 ?
    kgeasnmierr()+163
    call
    kgerinv()       
    0069107E0 ? 011F80370 ?
    7FFF19B98D00 ? 7FFF19B98C40 ?
    000000000 ? 000000000 ?
    kssmov()+502    
    call
    kgeasnmierr()   
    0069107E0 ? 011F80370 ?
    7FFF19B98D00 ? 7FFF19B98C40 ?
    000000029 ? 0D3F1C600 ?
    kfncInitSlavePool()  call
    kssmov()        
    0D3F1C5D0 ? 000000000 ?
    +203                                          
    7FFF19B98D00 ? 7FFF19B98C40 ?
    000000029 ? 0D3F1C600 ?
    kfncWorkMsgAlloc()+  call
    kfncInitSlavePool()  0D3F1C5D0 ? 000000000 ?
    83                                            
    7FFF19B98D00 ? 7FFF19B98C40 ?
    000000029 ? 0D3F1C600 ?
    kfncFileUnidentify(  call
    kfncWorkMsgAlloc()   0D3F1C5D0 ? 7FFF19B99AD0 ?
    )+635                                         
    7FFF19B98D00 ? 7FFF19B98C40 ?
    000000029 ? 0D3F1C600 ?
    kffmRequestFree()+1  call
    kfncFileUnidentify(  7FFF19B99BC8 ? 7FFF19B99BC0 ?
    Br,
    Raj

    One needs to know the meaning of the kernel functions and their working within the oracle database. I guess, oracle support can do the analysis more easily as they have access to the software code  as well necessary tools to interpret these internal routines.
    Aman....

  • How to send the file contents in the application server to ftp server

    Hi,
    how to send the file contents in the application server to ftp server.
    regards,
    sree

    Test SAP FTP functions
    DATA: BEGIN OF MTAB_DATA OCCURS 0,
    LINE(132) TYPE C,
    END OF MTAB_DATA.
    DATA: MC_PASSWORD(20) TYPE C,
    MI_KEY TYPE I VALUE 26101957,
    MI_PWD_LEN TYPE I,
    MI_HANDLE TYPE I.
    START-OF-SELECTION.
    MC_PASSWORD = 'password'.
    DESCRIBE FIELD MC_PASSWORD LENGTH MI_PWD_LEN.
    *-- FTP_CONNECT requires an encrypted password to work
    CALL 'AB_RFC_X_SCRAMBLE_STRING'
         ID 'SOURCE' FIELD MC_PASSWORD ID 'KEY' FIELD MI_KEY
         ID 'SCR' FIELD 'X' ID 'DESTINATION' FIELD MC_PASSWORD
         ID 'DSTLEN' FIELD MI_PWD_LEN.
    CALL FUNCTION 'FTP_CONNECT'
         EXPORTING
           USER            = 'userid'
           PASSWORD        = MC_PASSWORD
           HOST            = 'servername'
           RFC_DESTINATION = 'SAPFTP'
         IMPORTING
           HANDLE          = MI_HANDLE
         EXCEPTIONS
           NOT_CONNECTED   = 1
           OTHERS          = 2.
    CHECK SY-SUBRC = 0.
    CALL FUNCTION 'FTP_COMMAND'
         EXPORTING
           HANDLE = MI_HANDLE
           COMMAND = 'dir'
         TABLES
           DATA = MTAB_DATA
         EXCEPTIONS
           TCPIP_ERROR = 1
           COMMAND_ERROR = 2
           DATA_ERROR = 3
           OTHERS = 4.
    IF SY-SUBRC = 0.
      LOOP AT MTAB_DATA.
        WRITE: / MTAB_DATA.
      ENDLOOP.
    ELSE.
    do some error checking.
    ENDIF.
    CALL FUNCTION 'FTP_DISCONNECT'
         EXPORTING
           HANDLE = MI_HANDLE
         EXCEPTIONS
           OTHERS = 1.
    Execute external commands (FTP Scripts)
    The following code shows the syntax of the FM 'SXPG_COMMAND_EXECUTE'. You pass it the external command created within transaction SM69 and it will execute it.
    DATA: ld_comline 
    LIKE sxpgcolist-name,
            ld_param    LIKE sxpgcolist-parameters,
            ld_status   LIKE extcmdexex-status,
            ld_output   LIKE btcxpm OCCURS 0 WITH HEADER LINE,
            ld_subrc    LIKE sy-subrc.
      REFRESH ld_output.
      MOVE 'FTP_DATA_IN' to ld_comline.         "Maintained using trans SM69
    Execute external command, contained in 'ld_comline'
      CALL FUNCTION 'SXPG_COMMAND_EXECUTE'
           EXPORTING
                commandname                   = ld_comline
              additional_parameters   = ld_param  "Params passed to script
              operatingsystem              
    = 'UNIX'
           IMPORTING
                status                        = ld_status
           TABLES
                exec_protocol                 = ld_output
           EXCEPTIONS
                no_permission
                     = 1
                command_not_found
                 = 2
                parameters_too_long          
    = 3
                security_risk                
    = 4
                wrong_check_call_interface    = 5
                program_start_error           = 6
                program_termination_error     = 7
                x_error                       = 8
                parameter_expected            = 9
                too_many_parameters           = 10
                illegal_command               = 11
                wrong_asynchronous_parameters = 12
                cant_enq_tbtco_entry
              = 13
                jobcount_generation_error
         = 14
                OTHERS                       
    = 15.
      IF sy-subrc NE 0.
      ENDIF.

  • How to upload large file with http via post

    Hi guys,
    Does anybody know how to upload large file (>100 MB) use applet to servlet with http via post method? Thanks in advance.
    Regards,
    Mark.

    Hi SuckRatE
    Thanks for your reply. Could you give me some client side code to upload a large file. I use URL to connect to server. It throws out of memory exception. The part of client code is below:
    // connect to the servlet
    URL theServlet = new URL(servletLocation);
    URLConnection servletConnection = theServlet.openConnection();
    // inform the connection that we will send output and accept input
    servletConnection.setDoInput(true);
    servletConnection.setDoOutput(true);
    // Don't used a cached version of URL connection.
    servletConnection.setUseCaches (false);
    servletConnection.setDefaultUseCaches(false);
    // Specify the content type that we will send text data
    servletConnection.setRequestProperty("Content-Type",
    +"application/octet-stream");
    // send the user string to the servlet.
    OutputStream outStream = servletConnection.getOutputStream();
    FileInputStream filein = new FileInputStream(largeFile);
    //BufferedReader in = new BufferedReader(new InputStreamReader
    +(servletConnection.getInputStream()));
    //System.out.println("tempCurrent = "+in.readLine());
    byte abyte[] = new byte[2048];
    int cnt = 0;
    while((cnt = filein.read(abyte)) > 0)
    outStream.write(abyte, 0, cnt);
    filein.close();
    outStream.flush();
    outStream.close();
    Regards,
    Mark.

  • How to view the file content from the directory? getting Error:ORA-21560

    SQL> create directory READ_LOB_DIR as 'D:\Prj\Comm\Data';
    CREATE OR REPLACE Procedure READ_FILE_LOB IS
    -- Input Directory as specified in create directory
    l_dir CONSTANT VARCHAR2(30) := 'READ_LOB_DIR';
    -- Input File which is read word by word
    l_fil CONSTANT VARCHAR2(30) := 'testfile.txt';
    -- Separator Character between words is a BLANK (ascii = 32)
    l_seb CONSTANT RAW(100) := UTL_RAW.CAST_TO_RAW(CHR(32));
    -- Character at the end of the file is NEWLINE (ascii = 10)
    l_sen CONSTANT RAW(100) := UTL_RAW.CAST_TO_RAW(CHR(10));
    -- Pointer to the BFILE
    l_loc BFILE;
    -- Current position in the file (file begins at position 1)
    l_pos NUMBER := 1;
    -- Amount of characters have been read
    l_sum BINARY_INTEGER := 0;
    -- Read Buffer
    l_buf VARCHAR2(500);
    -- End of the current word which will be read
    l_end NUMBER;
    -- Return value
    l_ret BOOLEAN := FALSE;
    BEGIN
    -- Mapping the physical file with the pointer to the BFILE
    l_loc := BFILENAME(l_dir, l_fil);
    -- Check if the file exists
    l_ret := DBMS_LOB.FILEEXISTS(l_loc) = 1;
    IF (l_ret) THEN
    dbms_output.put_line('File ' || l_fil || ' in Directory ' || l_dir ||
    ' exists');
    -- Open the file in READ_ONLY mode
    DBMS_LOB.OPEN(l_loc, DBMS_LOB.LOB_READONLY);
    LOOP
    -- Calculate the end of the current word
    l_end := DBMS_LOB.INSTR(l_loc, l_seb, l_pos, 1);
    -- Process end-of-file
    IF (l_end = 0) THEN
    l_end := DBMS_LOB.INSTR(l_loc, l_sen, l_pos, 1);
    l_sum := l_end - l_pos - 1;
    DBMS_LOB.READ(l_loc, l_sum, l_pos, l_buf);
    dbms_output.put_line(UTL_RAW.CAST_TO_VARCHAR2(l_buf));
    EXIT;
    END IF;
    -- Read until end-of-file
    l_sum := l_end - l_pos;
    DBMS_LOB.READ(l_loc, l_sum, l_pos, l_buf);
    dbms_output.put_line(UTL_RAW.CAST_TO_VARCHAR2(l_buf));
    l_pos := l_pos + l_sum + 1;
    END LOOP;
    DBMS_LOB.CLOSE(l_loc);
    ELSE
    dbms_output.put_line('File ' || l_fil || ' in Directory ' || l_dir ||
    ' does not exist');
    END IF;
    EXCEPTION
    WHEN OTHERS THEN
    dbms_output.put_line('Error:' || SQLERRM);
    DBMS_LOB.CLOSE(l_loc);
    END;
    The Text file content is...
    Copyright 1996,2001 Oracle Corporation.     All Rights Reserved
    This file contains installation instructions for installing the
    Oracle8 ODBC Driver software.
    It is divided into four parts:
    o Part I: Summary of systems supported by Oracle8 ODBC client
    software
    Lists the platforms on which the Oracle8 ODBC Client software can
    be installed.
    o Part II: Oracle8 ODBC Driver software.
    Describes the files, and installation prerequisites for the Oracle8
    ODBC driver software.
    o Part III: Exploding the kit onto your system
    Describes how to explode the kit onto your system hard drive.
    o Part IV: Installation Instructions
    Describes how to install the Oracle8 ODBC driver.
    Part I: Systems supported by the Oracle8 client software
    You can install the ODBC client software on any of the following systems:
    o Windows 2000
    o Windows NT X86
    o Windows 95
    o Windows 98
    The Oracle8 ODBC Driver provides support for ODBC connections
    from Windows 2000, Windows NT, Windows 95, and Windows 98 systems
    to Oracle databases.
    o Part II: Oracle8 ODBC Driver software.
    Refer to the following files for information about the Oracle8 ODBC Driver:
    LICENSE.TXT - Oracle8 ODBC Driver License Agreement. Read carefully
    before installing and/or using this product. Enclosed in
    your software distribution kit.
    SQORA.HLP - A Window's Help file which is the primary reference
              manual for the Oracle8 ODBC Driver.
    ODBCRelnotes.WRI - The release notes for the Oracle8 ODBC Driver
    which contains information which may have not been
    included in the Help file.
    Installation Prerequisites
    See the Oracle8 ODBC Driver release notes (ODBCRelnotes.WRI),
    for a complete list of software products required and their versions.
    Time Required
    The installation of the Oracle8 ODBC Driver takes approximately 5
    minutes. The actual time may be shorter or longer, depending upon
    your hardware configuration.
    Disk Space Required
    The Oracle8 ODBC driver installation requires approximately 2
    megabytes of available storage space. The space required depends upon
    what files you already have installed. The installation procedure
    checks to see if you have enough available disk space. If you do not,
    the installation fails.
    Part III: Exploding the Kit onto your system
    Expand the self-extracting archive file onto your hard drive.
    C:\> ORA8174.EXE
    Part IV: Installation Instructions
    Oracle8 ODBC Driver 8.1.7.4.0
    This section assumes the following:
    1. MS Windows 2000, Windows NT, Windows 95 or Windows 98 is running.
    2. Oracle Universal Installer shipping with 8.1.7 has already been
    installed on your system.
    3. Part III has been completed.
    Software fixes:
    Refer to release notes (ODBCRelnotes.wri) for a complete list of
    Software fixes.
    Installation Instructions
    Once the self-extracting archive file ORA8174.EXE has been
    exploded it will create an installable directory structure
    onto your hard drive. Run the Oracle Universal Installer from
    your local drive.
    1. On the screen "File Locations" use the "Browse" button of
    the source path to choose the file 'products.jar' from the
    folder that ORA8174.EXE was extracted to. Choose 'Next'.
    2. You will receive a warning that some of the dependencies of
    this product are not found in the staging area. This warning
    is OK. The ODBC driver depends on the Net8 Client being already
    installed on the system. Answer 'Yes' to continue.
    Oracle is a registered trademark of Oracle Corporation.
    Microsoft, MS are registered trademarks of Microsoft Corporation.
    Microsoft Windows, Windows NT, Windows 95, Windows 98 and Open Database
    Connectivity are trademarks of Microsoft Corporation.
    All other trademarks and registered trademarks are the property
    of their respective owners.
    The output was...
    File testfile.txt in Directory READ_LOB_DIR exists
    Copyright
    1996,2001
    Oracle
    Corporation.     
    All
    Rights
    Reserved
    This
    file
    contains
    installation
    instructions
    for
    installing
    the
    Oracle8
    ODBC
    Driver
    software.
    It
    is
    divided
    into
    four
    parts:
    o
    Part
    I:
    Summary
    of
    systems
    supported
    by
    Oracle8
    ODBC
    client
    Error:ORA-21560: argument 2 is null, invalid, or out of range
    I want to diplay/view as per file content format from the file under that specified directory.
    Have any other method / any help or suggestions would be really appreciated.

    I changed the code like...
    CREATE OR REPLACE Procedure READ_FILE_LOB_tmp IS
    -- Input Directory as specified in create directory
    l_dir CONSTANT VARCHAR2(30) := 'READ_LOB_DIR';
    -- Input File which is read word by word
    l_fil CONSTANT VARCHAR2(30) := 'testfile.txt';
    -- Separator Character between words is a BLANK (ascii = 32)
    l_seb CONSTANT RAW(100) := UTL_RAW.CAST_TO_RAW(CHR(32));
    -- Character at the end of the file is NEWLINE (ascii = 10)
    l_sen CONSTANT RAW(100) := UTL_RAW.CAST_TO_RAW(CHR(10));
    -- Pointer to the BFILE
    l_loc BFILE;
    -- Current position in the file (file begins at position 1)
    l_pos NUMBER := 1;
    -- Amount of characters have been read
    l_sum BINARY_INTEGER := 0;
    -- Read Buffer
    l_buf VARCHAR2(4000);
    -- End of the current word which will be read
    l_end NUMBER;
    -- Return value
    l_ret BOOLEAN := FALSE;
    BEGIN
    -- Mapping the physical file with the pointer to the BFILE
    l_loc := BFILENAME(l_dir, l_fil);
    -- Check if the file exists
    l_ret := DBMS_LOB.FILEEXISTS(l_loc) = 1;
    IF (l_ret) THEN
    dbms_output.put_line('File ' || l_fil || ' in Directory ' || l_dir ||
    ' exists');
    -- Open the file in READ_ONLY mode
    DBMS_LOB.OPEN(l_loc, DBMS_LOB.LOB_READONLY);
    LOOP
    -- Calculate the end of the current word
    l_end := DBMS_LOB.INSTR(l_loc, l_sen, l_pos, 1);
    -- Process end-of-file
    IF (l_end = 0) THEN
    EXIT;
    END IF;
    -- Read until end-of-file
    l_sum := l_end - l_pos;
    DBMS_LOB.READ(l_loc, l_sum, l_pos, l_buf);
    dbms_output.put_line(UTL_RAW.CAST_TO_VARCHAR2(l_buf));
    l_pos := l_pos + l_sum + 1;
    END LOOP;
    DBMS_LOB.CLOSE(l_loc);
    ELSE
    dbms_output.put_line('File ' || l_fil || ' in Directory ' || l_dir ||
    ' does not exist');
    END IF;
    EXCEPTION
    WHEN OTHERS THEN
    dbms_output.put_line('Error:' || SQLERRM);
    DBMS_LOB.CLOSE(l_loc);
    END;
    Now its working fine with one addtional line...
    The file content is...
    This is My Content
    This is My Content
    This is My Content
    This is My Content
    This is My Content
    But The output was...
    File testfile.txt in Directory READ_LOB_DIR exists
    This is My Content
    This is My Content
    This is My Content
    This is My Content
    This is My Content
    here, i want to delete that additonal line...?

  • How to read a file content for editing?

    Now i am using FileInputStream to read its content by bytes. How do i read the content line by line as string so that i am able to do some editing using replace().

        public String load() throws FileNotFoundException, IOException {
             BufferedReader r = new BufferedReader(new FileReader(new File(this.getClass().getResource(filename).getPath())));
             String s = r.readLine();
             StringBuffer result = new StringBuffer();
             while (s != null) {
                  result.append(s + "\n");
                  s = r.readLine();
             r.close();
             return result.toString();

  • How to read a file content from portal

    Hi experts,
    I have a file (xml or xlsx), which i have kept in D drive.
    then using GUI_UPLOAD, i have read file content into internal table. then i am proceeding furthur.
    but in real, my file will be in portal (means https:\\in.xyz.com\........\TEST.XML
    in this case i can not use GUI_UPLOAD.
    can any one suggest how can i achieve above. Thanks.
    Regards,
    Venkata Prasad

    Hi venkata
    try this code below
    tables: znks_exceldb.
    types: begin of wa_input,
           emp_id type string,
           name type string,
           middle type string,
           last_name type string,
           address type string,
           acc_num type string,
           mobile type string,
    end of wa_input.
    data: gt_intern type kcde_intern.
    data:gwa_intern type kcde_intern_struc.
    data gt_input type table of wa_input.
    data gwa_input like line of gt_input.
    data it_tab type table of znks_exceldb.
    data it_wa like line of it_tab.
    constants c_seprator type c value ','.
    parameters ex_file type localfile obligatory.
    at selection-screen on value-request for ex_file.
      call function 'F4_FILENAME'
    * EXPORTING
    *   PROGRAM_NAME        = SYST-CPROG
    *   DYNPRO_NUMBER       = SYST-DYNNR
    *   FIELD_NAME          = ' '
       importing
         file_name           = ex_file.
    start-of-selection.
      perform readfile using ex_file.
      perform insert.
      perform display.
    form readfile using ex_file type localfile.
      data:lv_filename type rlgrap-filename.
      data: lv_index type i.
      field-symbols: <> type any.
      lv_filename = ex_file.
      call function 'KCD_CSV_FILE_TO_INTERN_CONVERT'
        exporting
          i_filename      = lv_filename
          i_separator     = c_seprator
        tables
          e_intern        = gt_intern
        exceptions
          upload_csv      = 1
          upload_filetype = 2
          others          = 3.
      if sy-subrc <> 0.
    * Implement suitable error handling here
      endif.
      loop at gt_intern into gwa_intern.
        move gwa_intern-col to lv_index.
        assign component lv_index of structure gwa_input to <>.
        move:gwa_intern-value to <>.
        at end of row.
          append gwa_input  to gt_input.
          clear gwa_input.
        endat.
      endloop.
    endform.
    form insert.
      loop at gt_input into gwa_input.
        it_wa-emp_id = gwa_input-emp_id.
        it_wa-name = gwa_input-name.
        it_wa-middle = gwa_input-middle.
        it_wa-last_name = gwa_input-last_name.
        it_wa-address = gwa_input-address.
        it_wa-mobile = gwa_input-mobile.
        it_wa-acc_num = gwa_input-acc_num.
        append it_wa to it_tab.
      endloop.
      insert znks_exceldb from table it_tab accepting duplicate keys.
    endform.
    form display.
      loop at gt_input into gwa_input.
        write :/ gwa_input-emp_id,
                 gwa_input-name,
                 gwa_input-middle,
                 gwa_input-last_name,
                 gwa_input-address,
                  gwa_input-mobile,
                  gwa_input-acc_num .
      endloop.
    endform.
    Regards
    Niraj Sinha

  • How to extract original file contents from content server

    Hi,
    1)How can we extract original file contents from the content server (which in our case is SAP database itself)...
    2)What exactly is PHIO_ID and LOIO_ID?
    Thanks and regards,
    Santhosh Kumar U.P

    Hi,
    concerning your first question - please decribe, what you are trying to do.
    Question 2:
    LOIO_ID is the ID of the Logical Information Object. A LOIO is not a real document, but kind of a virtual document, a containerfor all "real" versions of a document. A PHIO (physical info object) is a real document.
    you can read more at http://sercie.sap.com/Kpro
    Kind regards,
    Carl

  • How to read text file content in portal application?

    Hi,
    How do we read text file content in portal application?
    Can anyone forward the code to do do?
    Regards,
    Anagha

    Check the code below. This help you to know how to read the text file content line by line. You can display as you require.
    IUser user = WPUMFactory.getServiceUserFactory().getServiceUser("cmadmin_service");
    IResourceContext resourceContext = new ResourceContext(user);
    String filePath = "/documents/....";
    RID rid = RID.getRID(filePath);
    IResource resource = ResourceFactory.getInstance().getResource(rid,resourceContext);
    InputStream inputStream = resource.getContent().getInputStream();
    BufferedReader reader = new BufferedReader(new InputStreamReader(inputStream));
    String line = reader.readLine();
    while(line!=null) {
          line = reader.readLine();
         //You can append in string buffer to get file content as string object//
    Regards,
    Yoga

  • How to read entire file content in one XML tag?

    Hi,
    How can I read entire file content in one XML tag?
    What specifications do I need to specify in Sender adapter?
    regards,
    Anirudh.

    Hi Chirag,
    I am reading a flat file for File to Idoc scenario.
    Target Idoc is nested which can not be populated with graphical mapping.
    see below post for more detail.
    [Mapping flat XML to nested IDOC using node functions |Mapping flat XML to nested IDOC using node functions;
    The problem here is I'm not able to identify when to insert context change for child which is repeating for a repeating parent.
    Solution therefore, I think is reading entire flat structure in one node and then use UDF to populated intermediate target with proper nesting.
    Thats why I need to read entire XML.
    regards,
    Anirudh.

  • How to send attachment(file) in javamail via JSP ?

    Dear Friends,
    Please guide me for :
    (1) my e-mail client is using JSP. So, hoW to send file-attachments via jsp ?
    Please specify example for attaching file(s) to a message object in JSP ( and only in JSP ).
    I have used HTML <input type="file" .... > control , but don't know how to bring that file to the jsp file and then attach it to the message object.
    Thank u.

    I wouldn't recommend using JSP to do that. I would use a servlet instead. Then you are just writing Java code, and to answer your two questions you need to learn about JavaMail (1) and get some already-written classes to do file uploads such as this one: http://www.servlets.com/cos/index.html (2).

  • How to publish RPD file

    Hi All,
    I am new in OBIEE world. I had created a RPD file in server with off line mode. It is in saved under repositiory folder. Now I want it to publish in server in order to create report and dashboard. Could you please let me know step by step instruction how to publish?
    Edited by: Welcome99 on Mar 15, 2012 11:05 AM

    Thanks for your help. These links are very useful. But I had created rpd file in server (example IP address: 1.2.3.4). I understand that we need to use OEM/FMW (which link is http://1.2.3.4:5000/em) for rpd publishing. Now how to upload rpd file from server to OEM/FMW? When we click the OEM/FMW, it is opening and when I broswe the rpd file, local pc path is showing. How to navigate sever path?

  • How to print PDF file content from ABAP in background?

    Hi,
    Is it possible to print PDF file content from ABAP in background?
    I have some PDF content which I need to print it, these PDF files are generated outside the SAP.
    Please have you any suggestions?
    Thank you
    Tomas

    <b><u>Solution:</u></b><br>
    <br>
    The target output device must support PDF print, this is only one limitation.<br>
    <br>
    REPORT  z_print_pdf.
    TYPE-POOLS: abap, srmgs.
    PARAMETERS: p_prnds LIKE tsp01-rqdest OBLIGATORY DEFAULT 'LOCL',
                p_fname TYPE file_table-filename OBLIGATORY LOWER CASE,
                p_ncopi TYPE rspocopies OBLIGATORY DEFAULT '1',
                p_immed AS CHECKBOX.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_fname.
      DATA: lv_rc     TYPE i,
            lv_filter TYPE string.
      DATA: lt_files TYPE filetable.
      FIELD-SYMBOLS: <fs_file> LIKE LINE OF lt_files.
      CONCATENATE 'PDF (*.pdf)|*.pdf|' cl_gui_frontend_services=>filetype_all INTO lv_filter.
      CALL METHOD cl_gui_frontend_services=>file_open_dialog
        EXPORTING
          file_filter             = lv_filter
        CHANGING
          file_table              = lt_files
          rc                      = lv_rc
        EXCEPTIONS
          OTHERS                  = 1.
      IF sy-subrc NE 0 AND lv_rc EQ 0.
        MESSAGE 'Error' TYPE 'E' DISPLAY LIKE 'S'.
      ENDIF.
      READ TABLE lt_files ASSIGNING <fs_file> INDEX 1.
      IF sy-subrc EQ 0.
        p_fname = <fs_file>-filename.
      ENDIF.
    AT SELECTION-SCREEN.
      DATA: lv_name   TYPE string,
            lv_result TYPE boolean.
      lv_name = p_fname.
      CALL METHOD cl_gui_frontend_services=>file_exist
        EXPORTING
          file                 = lv_name
        RECEIVING
          result               = lv_result
        EXCEPTIONS
          OTHERS               = 1.
      IF sy-subrc NE 0.
        MESSAGE 'Bad file!' TYPE 'E' DISPLAY LIKE 'S'.
      ENDIF.
      IF lv_result NE abap_true.
        MESSAGE 'Bad file!' TYPE 'E' DISPLAY LIKE 'S'.
      ENDIF.
    START-OF-SELECTION.
    END-OF-SELECTION.
      PERFORM process.
    FORM process.
      DATA: lv_name     TYPE string,
            lv_size     TYPE i,
            lv_data     TYPE xstring,
            lv_retcode  TYPE i.
      DATA: lt_file TYPE srmgs_bin_content.
      lv_name = p_fname.
      CALL METHOD cl_gui_frontend_services=>gui_upload
        EXPORTING
          filename                = lv_name
          filetype                = 'BIN'
        IMPORTING
          filelength              = lv_size
        CHANGING
          data_tab                = lt_file
        EXCEPTIONS
          OTHERS                  = 1.
      IF sy-subrc NE 0.
        MESSAGE 'Read file error!' TYPE 'E' DISPLAY LIKE 'S'.
      ENDIF.
      CALL FUNCTION 'SCMS_BINARY_TO_XSTRING'
        EXPORTING
          input_length = lv_size
        IMPORTING
          buffer       = lv_data
        TABLES
          binary_tab   = lt_file
        EXCEPTIONS
          failed       = 1
          OTHERS       = 2.
      IF sy-subrc NE 0.
        MESSAGE 'Binary conversion error!' TYPE 'E' DISPLAY LIKE 'S'.
      ENDIF.
      PERFORM print USING p_prnds lv_data CHANGING lv_retcode.
      IF lv_retcode EQ 0.
        WRITE: / 'Print OK' COLOR COL_POSITIVE.
      ELSE.
        WRITE: / 'Print ERROR' COLOR COL_NEGATIVE.
      ENDIF.
    ENDFORM.                    " PROCESS
    FORM print USING    iv_prndst  TYPE rspopname
                        iv_content TYPE xstring
               CHANGING ev_retcode TYPE i.
      DATA: lv_handle    TYPE sy-tabix,
            lv_spoolid   TYPE rspoid,
            lv_partname  TYPE adspart,
            lv_globaldir TYPE text1024,
            lv_dstfile   TYPE text1024,
            lv_filesize  TYPE i,
            lv_pages     TYPE i.
      CLEAR: ev_retcode.
      CALL FUNCTION 'ADS_SR_OPEN'
        EXPORTING
          dest            = iv_prndst
          doctype         = 'ADSP'
          copies          = p_ncopi
          immediate_print = p_immed
          auto_delete     = 'X'
        IMPORTING
          handle          = lv_handle
          spoolid         = lv_spoolid
          partname        = lv_partname
        EXCEPTIONS
          OTHERS          = 1.
      IF sy-subrc NE 0.
        ev_retcode = 4.
        RETURN.
      ENDIF.
      CALL FUNCTION 'ADS_GET_PATH'
        IMPORTING
          ads_path = lv_globaldir.
      CONCATENATE lv_globaldir '/' lv_partname '.pdf' INTO lv_dstfile.
      OPEN DATASET lv_dstfile FOR OUTPUT IN BINARY MODE.
      IF sy-subrc NE 0.
        ev_retcode = 4.
        RETURN.
      ENDIF.
      TRANSFER iv_content TO lv_dstfile.
      IF sy-subrc NE 0.
        ev_retcode = 4.
        RETURN.
      ENDIF.
      CLOSE DATASET lv_dstfile.
      IF sy-subrc NE 0.
        ev_retcode = 4.
        RETURN.
      ENDIF.
      CALL FUNCTION 'ZBAP_RM_PDF_GET_PAGES'
        EXPORTING
          iv_content = iv_content
        IMPORTING
          ev_pages   = lv_pages.
      lv_filesize = XSTRLEN( iv_content ).
      CALL FUNCTION 'ADS_SR_CONFIRM'
        EXPORTING
          handle   = lv_handle
          partname = lv_partname
          size     = lv_filesize
          pages    = lv_pages
          no_pdf   = ' '
        EXCEPTIONS
          OTHERS   = 1.
      IF sy-subrc NE 0.
        ev_retcode = 4.
        RETURN.
      ENDIF.
      CALL FUNCTION 'ADS_SR_CLOSE'
        EXPORTING
          handle = lv_handle
        EXCEPTIONS
          OTHERS = 1.
      IF sy-subrc NE 0.
        ev_retcode = 4.
        RETURN.
      ENDIF.
    ENDFORM.                    " PRINT

  • How to download a file/contents through a session bean to the bean client

    Hi All,
    I'm a newbie to enterprise beans and facing a problem. I have a requirement where an excel file saved on the server will be a accessed by a session bean and return it to the bean client (developed in swing). Client will display the file contents, user edits the contents and saves. Pressing the save button will save the excel on the server again using the same session bean.
    As far as displaying the contents of excel on the form/panel is concerned I have developed this part and able to load files and save them on my local machine.
    But my main requirement is to load it through Session Bean and then save it back on the server. An EJB 2.0 code snippet addressing this part would be a great help.
    Thanks,

    and where's the problem?
    I see 2 EJB calls, one to retrieve the data and another one to send it back to the server.
    That's the simplest scenario, easy to implement using a stateless session bean (though if you want to prevent concurrent modification of the file there's a bit more work to do, like keeping a record of open files).
    A more complex solution would have the client send only the changes to the file (for network performance reasons maybe) and have the EJB merge those in some way with the original document.
    Complex, possibly error prone, probably not worth the effort.
    First scenario should pose no problem if you're familiar with Java and have a passing familiarity with EJB.

Maybe you are looking for

  • Acrobat 8.1.6 stuck in "spooling"

    I am using Acrobat 8, with updates up to 8.1.6, on Vista 64 bit with SP2 installed. All was fine until mid week, but now I cannot create PDF files. After add in are installed, all documents get  "stuck" in printer spooling. Any ideas what is wrong?

  • MRP minimums suggest wrong purchase orders

    Hi, We have a problem with a customer that is usign the MRP the message is in SAP and turn it to de SDN forums for a correction in a future release. In the following DRQ you can look for the DRQ and message that have the detail of the wrong behaivor.

  • How to run servlets in debugger

    Is it possible to start up or attach a debugger to a java servlet in WebLogic 5.1 that is using JDK 1.2.2? Thanks, Sean

  • Upgraded to ios 5.1 now extremely poor battery usage any ideas?

    Upgraded Sunday to ios 5.1 now extremely poor battery usage - any ideas?  Have tried a few thinks - nothing seems to make a difference?

  • Advance Billing with %Spent Revenue

    Hi Dina, My client has a scenario, where the commercial dept. would bill his customer based on the contract terms and conditions For example CV=100,000/- = Rev. Budget and milestones are .... M1=20% billing M2=30% billing M3=50% billing i.e, billing


HashFlare