How to publish the BI reports in portal

Hi All,
By Using URL , how to create the iviews and how to assign to workset,folder and to page , how we can create individually.
Thnaks & Regards,
sathish
Edited by: sathish kakumudi on Jun 13, 2010 2:10 PM

Hi ,
Thanks for quick and valuble responce,
Basically I do not have knowledge on this , earlier i use to send the URL lins to Portal consulatants and they use to publish in portal.
Now here there is portal consulatant, but i should deliver the same.
I created the folder
under that as per your information created the three sub folders with BW, ROLE< Work Set
and created under BW one i view .
But for linking as you said add to work set is not appearing when i do right click on the i view.
as mentioned the below , portal conete studio all the work where should i perform.
You create worksets in the Portal Content Studio using the Workset wizard, and then build structure hierarchies and assign content objects to the worksets in the Workset Editor.Right Click on the created Subfolder u201CWorksetu201D and choose the menu item Workset
I am giving trouble to you , i do not know that is why iam giving trouble to you. please can you elobrtae step by step.
Thansk & Regards,
sathish

Similar Messages

How to publish the BI content in portal using Information Boardcasting ?

Hi Gurus,
I know we can broadcost the BW information using (System admin->System Config->KM Config->Content Management-->Repository Manager)
BI document repsitory
BI Meta data repository
why we need two (Document and Meta data repostory) what is the use of it?
Now my question can someone please tell me the steps to achieve this?and also tell me about the advantage and dis-advantage of doing this?
Thanks in Advance,
Dharani

Hi Dharani,
see following links for more information
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0a5216a-349c-2a10-9baf-9d4797349f6a]
[http://help.sap.com/saphelp_nw04s/helpdata/en/38/3f59403db70272e10000000a155106/frameset.htm]
[http://help.sap.com/saphelp_nw04s/helpdata/en/85/905640a2f78437e10000000a155106/frameset.htm]
Best regards,
Denis

Dynamic publishing of crystal report in portal.

Hi All,
My understanding of publishing Crystal Report in portal is using the URL iview, is my understanding correct.
I have checked this in [Integration of BOE XI3.1 into the SAP Enterprise Portal 7.x|http://wiki.sdn.sap.com/wiki/display/BOBJ/IntegrationofBOEXI3.1intotheSAPEnterprisePortal+7.x] wiki
and my question is, when publishing the crystal report from Crystal Report Designer, it is published in BI via the bw publisher and saved under some BW role. Is it possible to display the saved report in portal with out creating the url iview as an object of pcd in portal, i mean the report which is saved under BW role needs to be displayed dynamically in portal with out iview creation. Is this possible.
Can someone comment on this.
Many Thanks,
Ansar

Hi Ansar,
The Crystal reports can be used for publishinh good quality gralha and charts through BW. though making a URL iView is not the only option.
Good examples of Crystal report usage have been explained in the link below:
[Crystal Report with BW|http://www.bi-expertonline.com/article.cfm?id=3666]
Regards,
Shailesh

How to publish a Crystal Report in Business One

Hi
Please can anyone tell me how I publish a Crystal report (which is now inbuilt in SAP B1) so it is available to all users? I have full administrator/manager user rights. I have so far created the report and saved it to my SAP server machine on it's C:drive.
Thank you very much for any help and info.
Matt

Hi, I worked out how to do it. I had to first enable the Crystal Add on from within SAP and then open the Crystal Reports Administration menu under Administration and then select "Manage Crystal Reports". From there you can browse to the report you have created and select the module for where you want it to appear under in SAP.
Edited by: matth76 on Jun 25, 2009 4:14 PM

How to check the unused users in portal.

Hi Guru,
We are doing auditing in Portal server.Can any tell us
How to check the unused users in portal?.
Regards,
Vivek

Use portal activity reporting for monitoring the users. This way you can monitor the users in the portal who logged on to the portal.
Below are things you can monitor from portal activity report iview
1) number of users logged on during the period of time.
2) Details of the users who logged on
3) monitoring particular iview/page
Check the below threads for more help
http://help.sap.com/saphelp_nw04s/helpdata/en/47/87329cc84a199ce10000000a42189d/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/47/87346dc84a199ce10000000a42189d/frameset.htm
Raghu

How to publish visual composer model to portal content

Dear all,
I need information about how to publish visual composer model to portal content. does any one now???
Regards.

Hi,
after doing deployment the model in the VC will be published in the Portal content.
You can define the path where you want to publish the Model in the Portal under portalk content in
(In VC) Tools->Options->Compiler->Deployment folder(mention the folder name in the portal content).
hope you got my point.
Regards,
Govindu

How to embed the WEBI report as portlet

I am a fresh man of WEBI.
I want to know how to embed the WEBI report to a web page as the portlet (like weblogic portal).
I have used the OpenDocument URL to do it, but the report have a tool bar on the top, status bar on the bottom and a prompt area on left. So what i want to know is how to integrate the report itself on my portal (no tool bar, no status bar and no prompt area). Is there any way to control the display of these different area?
thnaks!

Normally there is not way to deactivate the statusbar and the toolbar. What you can do is to try to capture the HTML stream using javascript and filter out the toolbar components. This can be quite complicated though since the html structure of the report is quite complicated (multiple iFrame layers). And there is no garantee that this structure will remain inchanged in the next fix pack or service pack.
A rather simpe solution could be to "cover" the toolbar with an additional opaque frame.
Regards
Stratos

How to do the ALV report output in groups and caluculate the tOTALS(URGENT

Hi
In my ALV report output .I have to group the output based on the DAYS field
0-10 days in one group
10-30 days in one group
above 30 days one group
There is also a field by name "AMOUNT" in my output.
I have to calculate SUBTOTALs at the end of every group and at the end of the report i should caluculate GRAND TOTAL.
Please remember that i should not use any any BLOCKED ALVs and for Totals i should not use the SYMBOLS provided in the application toolbar of the report
Thanks in Advance

Please don't repost your questions...
Check out my answer in your other post.
How to make the ALV report in groups and caluculate the TOTALS
Regards,
Naimesh Patel

JNI - How to use the error reporting mechanism?

I've developed a C++ DLL which is loaded from a commercial Win32 application (not written by me) as a plug-in for external calculations. On its initialization the C++ DLL launches the Java VM via the JNI invocation interface. When the DLL functions are called by the application, they forward the calls to Java objects inside the Java VM, again via JNI invocation interface.
This works well, but I have encountered a weird error.
From Java I open a JFrame containing a JTextArea as small console for debug output messages. If I turn output to this debug console off (my printToConsole routine checks whether a boolean flag is set), the string concatenation operator may lead to a crash of the Java VM.
For example, if in one of the Java functions called from the
DLL via JNI invocation interface the following is the first statement,
it leads to a crash of the Java VM and the application that loaded the C++ proxy DLL.
String test=""+Math.random(); // String test not used later
Interestingly, if I comment this statement out, the Java code works fine WITHOUT any crash. I've already thought about potential races and synchronization issues in my code, but I don't see where this is the case. And the string concatenation error fails as well, if I insert sleep() statements in front of it and at other places in the code. However, if I turn on log messages printed to my JFrame debug console (containing a JTextArea), the String concatenation works without problems.
So maybe the JNI interface has a bug and affects the Java VM; I don't see where my JNI code is wrong.
One problem is that I do not get any stdout output, as the C++ proxy DLL is loaded by the Windows application, even if I start the Windows application from the DOS command line (under Windows).
Does anyone know how to use the error reporting mechanism?
http://java.sun.com/j2se/1.4.2/docs/guide/vm/error-handling.html
Is it possible that the JVM, when it crashes, writes debug information about the crash into a file instead of stdout/stderr?
My C++ proxy DLL was compiled in debug mode, but the commercial application (which loaded the DLL) is very likely not.
I do not know hot to find the reason why the String concatenation fails inside the Java function called from the C++ DLL via JNI.

Yes, I've initially thought about errors in the C++ code too. But the C++ code is actually very simple and short. It doesn't allocate anything on the C++ side. It allocates a couple of ByteBuffers inside the Java VM however via JNI invocation interface calls of env->NewDirectByteBuffer(). The native memory regions accessed via the ByteBuffers are allocated not by my own C++ code, but by the program that calls my DLL (the program is Metastock).
The interesting thing is that everything works fine if output to my debug console is enabled, which means that in the Java print routine getConsoleLoggingState() returns true and text is appended to the jTextArea.
static synchronized void print(String str)
{ MetaStockMonitor mMon=getInstance();
if ( mMon.getFileLoggingState() && mMon.logFileWriter!=null) {
mMon.logFileWriter.print(str);
mMon.logFileWriter.flush();
if ( mMon.getConsoleLoggingState() ) {
mMon.jTextArea1.append(str);
Only if output to the JTextArea is turned off (ie. getConsoleLoggingState()==false), the crash happens when the FIRST statement in the Java routine called via JNI invocation interface is a (useless) String concatenation operation, as described above.
String test=""+Math.random(); // String test not used later
Moreover, the crash happens BEFORE the allocated ByteBuffer objects are accessed in the Java code. But again, if console output is turned on, it works stable. If console output is turned off, it works when the (useless) String concatenation operation is removed in the Java routine called from C++.
I've already thought about potential races (regarding multiple threads), but this can be ruled out in my case. It almost appears as if the JVM can have problems when called by the invocation interface (I tested it with Java 1.4.2 b28).
All the calls between C++ and Java go ALWAYS in the direction from C++ code to Java. Unfortunately, there is no special JRE version with extensive logging capabilities to facilitate debugging. And the problem is not easily reproducible either.
JNIEnv* JNI_GetEnv()
JNIEnv *env;
cached_jvm->AttachCurrentThread((void**)&env,NULL);
fprintf(logfile,"env=%i\n",env);
fflush(logfile);
return env;
// function called by Metastock's MSX plug-in interface
BOOL __stdcall createIndEngine (const MSXDataRec *a_psDataRec,
const MSXDataInfoRecArgsArray *a_psDataInfoArgs,
const MSXNumericArgsArray *a_psNumericArgs,
const MSXStringArgsArray *a_psStringArgs,
const MSXCustomArgsArray *a_psCustomArgs,
MSXResultRec *a_psResultRec)
a_psResultRec->psResultArray->iFirstValid=0;
a_psResultRec->psResultArray->iLastValid=-1;
jthrowable ex;
jmethodID mid;
JNIEnv* env=JNI_GetEnv();
jobject chart=getChart(env, a_psDataRec);
if ( chart==NULL) {
return MSX_ERROR;
jobject getChart (JNIEnv* env, const MSXDataRec *a_psDataRec)
jthrowable ex;
jmethodID mid;
int closeFirstValid, closeLastValid;
closeFirstValid=a_psDataRec->sClose.iFirstValid;
closeLastValid=a_psDataRec->sClose.iLastValid;
long firstDate, firstTime;
if (closeFirstValid>=1 && closeFirstValid<=closeLastValid) {
firstDate = a_psDataRec->psDate[closeFirstValid].lDate;
firstTime = a_psDataRec->psDate[closeFirstValid].lTime;
} else {
firstDate=0;
firstTime=0;
jclass chartFactoryClass = env->FindClass("wschwendt/metastock/msx/ChartFactory");
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot find class ChartFactory\n");
printSBufViaJava(sbuf);
return NULL;
mid = env->GetStaticMethodID(chartFactoryClass, "getInstance", "()Lwschwendt/metastock/msx/ChartFactory;");
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot find method ID for ChartFactory.getInstance()\n");
printSBufViaJava(sbuf);
return NULL;
jobject chartFactory=env->CallStaticObjectMethod(chartFactoryClass, mid);
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Exception while calling ChartFactory.getInstance()");
printSBufViaJava(sbuf);
return NULL;
mid = env->GetMethodID(chartFactoryClass, "getChartID", "(Ljava/nio/ByteBuffer;Ljava/nio/ByteBuffer;Ljava/nio/ByteBuffer;Ljava/nio/ByteBuffer;IIIIIII)F");
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot find method ID for ChartFactory.getChartID()\n");
printSBufViaJava(sbuf);
return NULL;
jobject symbolBuf=env->NewDirectByteBuffer(a_psDataRec->pszSymbol, strlen(a_psDataRec->pszSymbol) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate symbolBuf\n");
printSBufViaJava(sbuf);
return NULL;
jobject securityNameBuf=env->NewDirectByteBuffer(a_psDataRec->pszSecurityName, strlen(a_psDataRec->pszSecurityName) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate securityNameBuf\n");
printSBufViaJava(sbuf);
return NULL;
jobject securityPathBuf=env->NewDirectByteBuffer(a_psDataRec->pszSecurityPath, strlen(a_psDataRec->pszSecurityPath) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate securityPathBuf\n");
printSBufViaJava(sbuf);
return NULL;
jobject securityOnlineSourceBuf=env->NewDirectByteBuffer(a_psDataRec->pszOnlineSource, strlen(a_psDataRec->pszOnlineSource) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate onlineSourceBuf\n");
printSBufViaJava(sbuf);
return NULL;
// Java Function call leads to crash, if console output is turned off and
// the first statement in the Java routine is a (useless) string concatenation.
// Otherwise it works stable.
jfloat chartID=env->CallFloatMethod(chartFactory, mid, securityNameBuf, symbolBuf,
securityPathBuf, securityOnlineSourceBuf, (jint)(a_psDataRec->iPeriod),
(jint)(a_psDataRec->iInterval), (jint)(a_psDataRec->iStartTime),
(jint)(a_psDataRec->iEndTime), (jint)(a_psDataRec->iSymbolType),
(jint)firstDate, (jint)firstTime );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Exception while calling ChartFactory.getChartID()");
printSBufViaJava(sbuf);
return NULL;

How to stop the "minority report" type of personalized ads triggered by one's google search and appearing in the firefox browser?

Please advise how to stop the "minority report" type of personalized advertising apparently triggered by one's google search and appearing in the firefox browser.
== This happened ==
Every time Firefox opened
== a few months ago

If another uses the computer with their own user account, everything
is kept separate in each users folder. Only if someone used your account
would that be an issue.
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/viruses/disinfection/5350 Anti-Rootkit Utility - TDSSKiller]
* [http://general-changelog-team.fr/en/downloads/viewdownload/20-outils-de-xplode/2-adwcleaner AdwCleaner] (for more info, see this [http://www.bleepingcomputer.com/download/adwcleaner/ alternate AdwCleaner download page])
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

How to get the link report of a swf file to the set of clases

He But How to get the link Report of the SwF File

Here are some links with additional information:
http://stackoverflow.com/questions/185252/optimizing-flex-when-multiple-modules-are-used
http://livedocs.adobe.com/flex/3/html/help.html?content=modular_4.html
http://livedocs.adobe.com/flex/3/html/help.html?content=controls_15.html
http://livedocs.adobe.com/flex/3/html/help.html?content=compilers_14.html
If this post answers your question or helps, please mark it as such.

How to Enhance the Standard Report?

Hi All,
How to Enhance the Standard Report? :
When I am trying to execute the query called ZTIMES in the user group SQ01 it is navigating the screen to selection-screen with some inputs to be given here on the selection screen company code is mandatory as an input. The company code field is having the search help and it is fetching the values for the company code from table called PROJ Table (Project definition Table).But I want the company code should fetch the value from the PRPS Table ( Work break structure(WBS Element) Level).
Tables used are PROJ and PRPS.
The company code in PROJ is PROJ-VBUKR
In PRPS is PRPS-PBUKR
In the coding part related to that selection screen I have to replace PROJ-VBUKR with
PRPS-PBUKR.But it is standard report to enhance.
What is suggestible solution for this issue?
Thanks,
M Raju

Hi,
Since this is an ABAP Query, You can change the infoset query in SQ02 and establish the join linkages between PROJ and PRPS
Also on the selection screen of the Query make sure you provide company code from PRPS table and report output also from the same table reference.
Once you have modified the ABAP Query, activate and generate it so that it will internally regenerate the a standard program.
http://help.sap.com/erp2005_ehp_02/helpdata/en/d2/cb4256455611d189710000e8322d00/frameset.htm
ABAP Query (Sq01)Modification
Hope this helps
Regards,
Shiva

How to open the crystal reports 2008 in CRYSTAL REPORTS ENTERPRISE 4.0

Hi All,
Can you please let me know how can migrated the crystal reports from BO XI 3.1 to SAP BO 4.1 and after migrate how to open the crystal reports 2008 in CRYSTAL REPORTS ENTERPRISE 4.0.
can you please help on this and if document please share.
Thanks,
Rajesh

Use the upgrade management tool to move from 3.1 reports to BO 4.1. After migration, open the report in crystal enterprise 4.0, you will get a message saying that the report will be converted to latest version, will not be able to view from older version after converting. (Similar words- not sure exact words).

How to download the custom Reports to xls from the system?

Hi
How to download the custom Reports to xls from the system?
I know the t code SE38 for reports.
Vijay

Hi
Here the programa name is nothing but a report name???
Vijay

Urgent-How to publish the screen in the web?

Hi,
I created a screen in SRM system, and wanted to publish the screen in the web, can any one tell me how to publish the screen in the web?
thanks
Murali

Hi,
R u want to publish ur screen in ITS .Then you have to create a IAC in SE80 internet service file.Rgt click the service and publish or run the pgm <b> w3_publish_services </b>,slt your serive and publish ?
Cud you specify how you want to publish ? Thru ITS / BSP / EP ?
Rgds,
Jothi.
Mark useful answers.

How to publish the BI reports in portal

Similar Messages

Maybe you are looking for