HOW TO PULL OUT THE PAPER TRAY ON ENVY e4500

 I HAVE JUST BOUGHT  HP ENVY 4500 e ALL IN ONE, I AM HAVING TROUBLE FINDING OUT HOW TO PULL OUT THE PAPER TRAY.
This question was solved.
View Solution.

To pull it out to load paper, you first flip down open the front door (which is connected to the paper tray and serves as the output tray), then grab on the door and pull.
======================================================================================
* I am an HP employee. *
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **
***Click on White “Kudos” STAR to say thanks!***

Similar Messages

  • How does one remove the paper tray so the printer can be re-boxed for moving?

    Officejet 6600. How does one remove paper tray so printer can be re-boxed for moving

    Hi,
    The following video shows UN-BOXNG, hope they will help you to do a reverse:
       http://www.youtube.com/watch?v=jiwGnsjFTtw
    Please ignore he adv
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How to pull out the file in IDOC to File scenario

    Hi All,
    I have a scenario where, we are splitting an IDoc into 4 different files thru BPM.
    Those files are being sent to 3rd party file server. Now, is there any way in which i can see those files from my XI box?
    I am able to see only the xml's of those files in sxmb_moni. But, i want to see those exact files in their file formats, which are being sent to the file server.
    How can i get them?
    Many Thanks
    Chandra Sekhar
    Edited by: Chandra Sekhar H on Mar 28, 2008 2:29 PM

    Hi,
    > i want to see those exact files in their file formats, which are being sent to the file server.
      Create  another Communication Channel  FTP /NFS  and get the XML file.
    As Satish mentioned  you can acheive it,
    If you want to look at the File..Create one more File Adapter under the Same Business System   temporaly  point out the File adapter instead  of IDOC Adapter  then Switch to  IDOC Adapter later.
    Regards
    Sangeetha

  • How to find out the batch class link of the batch record in the MSC3N

    Hi,
    I would like to know how to pull out the class type and the characteristic value for a batch which is found in MSC3N.
    For example, the following is MSC3N screen showing material (INM000000001724945) and batch (A000001117) tie to batch class “XXXXXXXX”.
    Hence, I would like to know:
    How to pull out the class type and the characteristic value for a batch record which is found in MSC3N? What are the table? The table show in the F1 key is not a table.
    There are two batch classes setup in the system “XXXXXXX” and “YYYYYYY”, my question is why system decides to use the batch class “XXXXXXX”? Where is the system setup to determine this?
    Thanks
    Tuff

    Hi
    The table MCH1 keeps the information about Material, Batch and Internal object no.: Batch classification (CUOBJ_BM).
    The field CUOBJ_BM in MCHA represent the 'Key of object to be classified' (AUSP-OBJEK). The first 18 characters of AUSP-OBJEK.
    In CABN (Characteristic) the field ATINN and ATNAM is important. The link between CABN and AUSP is through ATINN.

  • How to pull out productivity report ?

    Dear SAP Pros,
    How does a person pull out the Productivity report in SAP ? There is a user in Infrastructure Logistics who does not know how to pull out the Quaterly Productivity Report .
    Thanks,
    D

    Hi,
    A little clarification required here. What are they expecting on the report?
    For production orders have a look at transaction COOIS.
    Regards,

  • How do I get a disc out of my super drive when I forgot to eject it from the drive before pulling out the USB cable ?

    how do I get a disc out of my super drive when I forgot to eject it from the drive before pulling out the USB cable ?

    How force eject disc: Apple Support Communities
    Mac Mini: Eject DVD Apple Support Communities

  • My Canon MX922 printer has stopped printing because it says the paper tray is empty. Tray is full.

    My Canon MX922 printer has all of a sudden stopped printing and I'm getting the error message that the paper tray is empty. The tray is full. I've removed and replaced several times. I've loaded the top feeder as well in case for some reason it was trying to pull from there. I've shut down and restarted several times as well, to no avail. I work from home and this is my own business so it's vital I have a working printer. Any suggestions as to what the problem is or is the printer shot? I've probably had it just over a year. 

    Hi nicolej31,
    You will want to ensure that there aren't any obstructions in the paper feed path that may be causing the paper not to feed and be recognized by the printer.  With a flashlight or other bright light, please check the paper feed areas of the printer to ensure no obstructions exist.  Once this has been done, please perform a roller cleaning on the unit by following the steps located here.
    You will also want to ensure that the paper type and size selected in the printer driver is applicable to the cassette tray that you are trying to print from.  For information on which paper sizes and types to load in each cassette tray, please click here.
    Hope this helps!
    This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • How do you open the DVD tray on a K430 without using Windows Explorer?

    How do you open the DVD tray on a K430 without using Windows Explorer? I can't find a button on or below the door.  Am I missing something?  Additionally, will the K430 boot from a DVD/CD if it finds one in the DVD tray instead of the hard disk?  Please help. Thanks. 
    Solved!
    Go to Solution.

    hi penguin247,
    Regarding your questions:
    1. Can you try to press the eject symbol on the DVD bay and observe if the DVD tray comes out.
    Link to picture
    2. By default, the HDD is set as the first boot device and the ODD second on the K430. You will need to change the boot order or continuously tap F12 during POST to boot from the ODD (assuming you have a bootable media inserted).
    Regards
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • My hp photosmart C310 continues to spit our blank prints until it empties the paper tray

    My Hp photosmart C310 for no reason will start spitting out blank prints until the paper tray is empty.  I can load paper all day and it continues printing blanks with just a D up in the corner.  No prints are in Q

    Hi letterleaver,
    Thank you for visiting the HP Support Forums! I see your HP Photosmart C310 continuously prints out pages with a D on the top of the page, there is nothing in the print queue and if you reload the paper it will continue until the paper runs out. I can understand your frustration and would like you to complete the steps below:
    1. Do a hard reset on the C310a and make sure to plug directly into a wall outlet, no surge protectors or power bars they can cause the printer to remain in error state or cause it to lose basic functionality over time.  Start here: Resetting the Printer
    2. I know you said there is nothing in the print queue, but there may be something stuck in the print spooler, I would like you to complete the steps listed here: Print Jobs Stuck
    3. Now run the HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
    Please let me know the outcome, I will watch for your reply.
    Thanks,
    I got this helpful information from www.mydigitallife.info
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Can any one tell me how to pull out a sealed management pack key token

    Hi All,
    Can any one tell me how to pull out a sealed management pack key token. I want to add dependencies to a management pointing towards a sealed management pack for which a "management pack key token" is required which i need to add in the XML File
    of the management pack. Can any one please tell me how to fetch that information.

    Hi Gautam,
    If you need to reference one management pack in another management pack, then you will need to know what the public key token is. When referencing a Microsoft management pack, it is easy as Microsoft always have the same key which is 31bf3856ad364e35 but
    if you need publickey token for other then MS management pack then you can simply run a SQL querry in your OperationManagerDB.
    select * from dbo.ManagementPack where MPName = 'Type your ManagementPackID'
    ManagementPackID will be present of the properties of the Management Pack.
    In that case the management pack should be imported in your SCOM environment.
    And you will get Public key token only for sealed Management packs not for unsealed.

  • Taking Out The SIM Card Wears Out The SIM Tray

    I wanted to take the SIM tray out of my (black) iPhone 3G just to check the SIM card out. It slightly wears out the area around the hole on the SIM tray to do that, it looks exactly what would happen to cheap plastic. Did anyone else remove the SIM card from their iPhone 3G? Which color is it? Does it look a little weared out after doing that? I'm a little *****d off, I just got my iPhone 3G and if I want to take out the SIM tray, I have to wear it out a little? Is the plastic really that cheap...?
    Do you guys think that there's any way that Apple will let me swap out just the SIM tray for a new tray? Everything else about my iPhone 3G is almost flawless, and I wouldn't want to swap out the whole phone for this. I think that the SIM tray is made out of cheaper plastic than the rest of the phone, which is noticable when you take the tray out. Here's my advice: DON'T TAKE THE SIM TRAY OUT! You'll probably regret it afterwards.

    My new iPhone, I could not even find where the sim holder was. I had to search the manual for info and I did not know about the sim extraction tool in the box.
    When I knew where the cover was I had to use strong light and my strong reading glasses to see it, it was really that flush.
    There was no hole for the sim tool or paper clip that I used, not realising that a sim tool was on the box cover. I had to punch through to reveal the hole and actually break out the sim holder.
    Not for the faint hearted with a brand new precious object in hand, but it had to be done and now the hole is very obvious and the aperture is very clear, even with my normal glasses.

  • If someone pulls out the LAN cable ?

    I need to trap this event, and make some software handle the situation. Is there any event or message or interrupt generated when some one pulls out the LAN cable or the interface card is down ? If yes where n how can I trap one?
    Ciao...

    thanx, I've tried this. and the syslogd does put "hme0: Link down, cable problem?" in case I pull out the cable, but as the god (customer) wants it we need to take care of the situation if the customer gives a command like "ifconfig hme0 down" accidently!! and syslogd doesn't seem to be putting any messeges in this case. so still the problem remains half solved. any ideas.
    warm regards,
    Kashyap

  • How to find out the user-exits?

    hi.
    how to find out the user-exits?
    regards
    eswar.

    Hi,
    *& Report  ZEXITFINDER
    *report  zexitfinder.
    *& Enter the transaction code that you want to search through in order
    *& to find which Standard SAP User Exits exists.
    *& Tables
    tables : tstc, "SAP Transaction Codes
    tadir, "Directory of Repository Objects
    modsapt, "SAP Enhancements - Short Texts
    modact, "Modifications
    trdir, "System table TRDIR
    tfdir, "Function Module
    enlfdir, "Additional Attributes for Function Modules
    tstct. "Transaction Code Texts
    *& Variables
    data : jtab like tadir occurs 0 with header line.
    data : field1(30).
    data : v_devclass like tadir-devclass.
    *& Selection Screen Parameters
    selection-screen begin of block a01 with frame title text-001.
    selection-screen skip.
    parameters : p_tcode like tstc-tcode obligatory.
    selection-screen skip.
    selection-screen end of block a01.
    *& Start of main program
    start-of-selection.
    Validate Transaction Code
    select single * from tstc
    where tcode eq p_tcode.
    Find Repository Objects for transaction code
    if sy-subrc eq 0.
    select single * from tadir
    where pgmid = 'R3TR'
    and object = 'PROG'
    and obj_name = tstc-pgmna.
    move : tadir-devclass to v_devclass.
    if sy-subrc ne 0.
    select single * from trdir
    where name = tstc-pgmna.
    if trdir-subc eq 'F'.
    select single * from tfdir
    where pname = tstc-pgmna.
    select single * from enlfdir
    where funcname = tfdir-funcname.
    select single * from tadir
    where pgmid = 'R3TR'
    and object = 'FUGR'
    and obj_name = enlfdir-area.
    move : tadir-devclass to v_devclass.
    endif.
    endif.
    Find SAP Modifactions
    select * from tadir
    into table jtab
    where pgmid = 'R3TR'
    and object = 'SMOD'
    and devclass = v_devclass.
    select single * from tstct
    where sprsl eq sy-langu
    and tcode eq p_tcode.
    format color col_positive intensified off.
    write:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    skip.
    if not jtab[] is initial.
    write:/(95) sy-uline.
    format color col_heading intensified on.
    write:/1 sy-vline,
    2 'Exit Name',
    21 sy-vline ,
    22 'Description',
    95 sy-vline.
    write:/(95) sy-uline.
    loop at jtab.
    select single * from modsapt
    where sprsl = sy-langu and
    name = jtab-obj_name.
    format color col_normal intensified off.
    write:/1 sy-vline,
    2 jtab-obj_name hotspot on,
    21 sy-vline ,
    22 modsapt-modtext,
    95 sy-vline.
    endloop.
    write:/(95) sy-uline.
    describe table jtab.
    skip.
    format color col_total intensified on.
    write:/ 'No of Exits:' , sy-tfill.
    else.
    format color col_negative intensified on.
    write:/(95) 'No User Exit exists'.
    endif.
    else.
    format color col_negative intensified on.
    write:/(95) 'Transaction Code Does Not Exist'.
    endif.
    Take the user to SMOD for the Exit that was selected.
    at line-selection.
    get cursor field field1.
    check field1(4) eq 'JTAB'.
    set parameter id 'MON' field sy-lisel+1(10).
    call transaction 'SMOD' and skip first screen.
    Regards

  • How to find out the Transactions used per month & the USER who used that

    Hi,
    1)How to find out the Transactions used per month & the USER who used that?
    2)and can i get the above same for minimum 20 month?
    System : SAP- Enterprise Core Component.

    You can use my program...
    *& Report  Z_ABAP_TCODE_MONITOR
    *****&  Program Type          : Report                                 *
    *****&  Title                 : Z_ABAP_TCODE_MONITOR                   *
    *****&  Transaction code      : ZTCODE_USAGE                           *
    *****&  Developer name        : Shailendra Kolakaluri                  *
    *****&  Deveopment start date : 26 th Dec 2011                         *
    *****&  Development Package   : ZDEV                                   *
    *****&  Transport No          : DEVK906086                                       *
    *****&  Program Description   : This program is to display
    *List all tcodes executed during previous day.
    *& Show the number of users executing tcodes
    *& Modification history
    REPORT  Z_ABAP_TCODE_MONITOR.
    *& List all tcodes executed during previous day.
    *& Show the number of users executing tcodes
    TYPE-POOLS : slis.
    DATA: ind TYPE i,
          fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE,
          layout TYPE slis_layout_alv,
          variant TYPE disvariant,
          events  TYPE slis_t_event WITH HEADER LINE,
          heading TYPE slis_t_listheader WITH HEADER LINE.
    *REPORT  z_report_usage.
    TYPES: BEGIN OF zusertcode,
      date   TYPE swncdatum,
      user   TYPE swncuname,
      mandt     TYPE swncmandt,
      tcode     TYPE swnctcode,
      report TYPE swncreportname,
      count     TYPE swncshcnt,
    END OF zusertcode.
    *data   : date type n.
    DATA: t_usertcode  TYPE swnc_t_aggusertcode,
          wa_usertcode TYPE swncaggusertcode,
          wa           TYPE zusertcode,
          t_ut         TYPE STANDARD TABLE OF zusertcode,
          wa_result    TYPE zusertcode,
          t_result     TYPE STANDARD TABLE OF zusertcode.
    PARAMETER: month TYPE dats DEFAULT sy-datum.
    *PARAMETER: date TYPE dats.
    *select-options : username for wa_usertcode-account.
    START-OF-SELECTION.
    PERFORM get_data.
    PERFORM get_fieldcatalog.
      PERFORM set_layout.
    PERFORM get_event.
    PERFORM get_comment.
      PERFORM display_data.
    FORM get_data .
    *date = sy-datum - 2 .
    After start-of-selection add this line (parameter Month required 01 as day).
      concatenate month+0(6) '01' into month.
      CALL FUNCTION 'SWNC_COLLECTOR_GET_AGGREGATES'
        EXPORTING
          component     = 'TOTAL'
          ASSIGNDSYS    = 'DEV'
          periodtype    = 'M'
          periodstrt    = month
        TABLES
          usertcode     = t_usertcode
        EXCEPTIONS
          no_data_found = 1
          OTHERS        = 2.
      wa-date  = month.
    *wa-date  = date.
      wa-mandt = sy-mandt.
    wa_usertcode-account = username.
      LOOP AT t_usertcode INTO wa_usertcode.
        wa-user = wa_usertcode-account.
        IF wa_usertcode-entry_id+72 = 'T'.
          wa-tcode  = wa_usertcode-entry_id.
          wa-report = space.
        ELSE.
          wa-tcode  = space.
          wa-report = wa_usertcode-entry_id.
        ENDIF.
        COLLECT wa INTO t_ut.
      ENDLOOP.
      SORT t_ut BY report ASCENDING.
      CLEAR: wa, wa_result.
    endform.
    FORM get_fieldcatalog .
    fcat-tabname     = 't_ut'.
    fcat-fieldname   = 'DATE'.
    fcat-seltext_l   = 'Date'.
    fcat-key         = 'X'.
    APPEND fcat.
      CLEAR fcat.
      fcat-tabname     = 't_ut'.
      fcat-fieldname   = 'MANDT'.
      fcat-seltext_l   = 'Client'.
      fcat-key         = 'X'.
      APPEND fcat.
      CLEAR fcat.
      fcat-tabname     = 't_ut'.
      fcat-fieldname   = 'USER'.
      fcat-seltext_l   = 'User Name'.
      fcat-key         = 'X'.
      APPEND fcat.
      CLEAR fcat.
      fcat-tabname     = 't_ut'.
      fcat-fieldname   = 'TCODE'.
      fcat-seltext_l   = 'Transaction Code'.
      fcat-key         = 'X'.
      APPEND fcat.
    ENDFORM.
    *&      Form  SET_LAYOUT
          text
    -->  p1        text
    <--  p2        text
    FORM set_layout .
      layout-colwidth_optimize = 'X'.
    ENDFORM.                    " SET_LAYOUT
    *&      Form  GET_EVENT
          text
    -->  p1        text
    <--  p2        text
    *FORM get_event .
    events-name = slis_ev_top_of_page.
    events-form = 'TOP_OF_PAGE'.
    APPEND events.
    *ENDFORM.                    " GET_EVENT
    **&      Form  GET_COMMENT
          text
    -->  p1        text
    <--  p2        text
    *FORM get_comment .
    DATA: text(30).
    text = 'Billing Report'.
    heading-typ = 'H'.
    heading-info = text.
    APPEND heading.
    *ENDFORM.                    " GET_COMMENT
    **&      Form  top_of_page
          text
    -->  p1        text
    <--  p2        text
    *FORM top_of_page .
    CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
       EXPORTING
         it_list_commentary       = heading[]
      I_LOGO                   =
      I_END_OF_LIST_GRID       =
    *ENDFORM.                    " top_of_page
    *&      Form  DISPLAY_DATA
          text
    -->  p1        text
    <--  p2        text
    FORM display_data .
      sort t_ut[].
    DELETE ADJACENT DUPLICATES FROM t_ut[] COMPARING ALL FIELDS.
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
        EXPORTING
          i_callback_program = sy-cprog
          is_layout          = layout
          it_fieldcat        = fcat[]
          i_save             = 'A'
          is_variant         = variant
          it_events          = events[]
        TABLES
          t_outtab           = t_ut
        EXCEPTIONS
          program_error      = 1
          OTHERS             = 2.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    ENDFORM.                    " DISPLAY_DATA

  • How to find out the person who did a transport.

    How to find out the person who did a transport.
    There are 3 basis admins in our Org.
    so is there a way of tracing out , who did what transport.
    Regards,

    - Goto import Overview (STMS)
    - Import Queue
    - Select DEV req (goto Import History)
    - Edit - Display More
    It will show the user who did the transport
    Rgds

Maybe you are looking for