How to put a break point while creating a travel request in ess

Hi to all experts,
My requirement is to put a break point in the badi while creating a travel request in Ess.
The badi name is TRIP_WEB_CHECK
i tried both external and session bps
i also tried this.
break uname
break-point
and it is i check whether is triggering by throwing dump like ( divide by zero) it is triggering
how to stop it while triggering

Hi Bhanu,
Please go through these links:
How to debug abap code in update rules...routine?
debug abap routine in infopackage
Debugging of global transfer and update routine
Debugging Start/Transfer routine
And have a look at this demo video to know how to set up break points and how to debug an ABAP program in NW2004s:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9cbb7716-0a01-0010-58b1-a2ddd8361ac0?prtmode=navigate
Hope it helps..
Cheers,
Habeeb

Similar Messages

  • How to add Trip reason while creating a Travel request

    Hi,
    I want to add Trip reason while creating a Travel request . I have not been able to maintain FTPT_REQ_HEAD through sm30. Urgent help required

    Hi,
    There is no customizable table for travel reason
    FTPT_REQ_HEAD is not maintanable
    This is standard SAP, and in field REQUEST_REASON you can enter the description that you want and system will allow you do that. The same thing with field " 1st destination"
    You add any description and it will be recorded and available for next entries in TP04
    Hope this answer to your question
    Best regards
    Tarek

  • Error while creating a Travel Request

    Hi All,
    EP 7,ESS/MSS 1.0
    We have a issue in Creating Travel Request in Portal.
    Once we fill all the required entries to create a travel request and click the review button it pops a message saying " Errors have been discovered when checking the Expense Report. Please correct them in order to proceed." .
    When i check the same in backend using the tcode- TRIP, we are able to create the travel request.
    Can some one tell me where we are going wrong and is there any configuration at backend to be done still.
    Thanks,
    NR

    Hi NR
    Ensure that all the variant are properly integrated between Travel & Expenses.
    Also, for testing, removing the integration and test if the pop-up comes back.
    If this helps, pl do reward.
    Thanks
    Narsimha

  • How to debugg and put a break-point in End Routine

    Hi all,
    Can anybody suggest how to put a break point in Endroutine in BI.7
    Thanks
    DB

    Hi Bhanu,
    Please go through these links:
    How to debug abap code in update rules...routine?
    debug abap routine in infopackage
    Debugging of global transfer and update routine
    Debugging Start/Transfer routine
    And have a look at this demo video to know how to set up break points and how to debug an ABAP program in NW2004s:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9cbb7716-0a01-0010-58b1-a2ddd8361ac0?prtmode=navigate
    Hope it helps..
    Cheers,
    Habeeb

  • How to set a break point !

    How to set a break point in the debugging screen !
    tell me the steps !

    Just Double click on the Left side of the Line where u want to put the breakpoint and Click Save.
    Or
    Place the Cursor on the Line and Click the Breakpoint Icon.
    Or
    Goto Utilities --> Breakpoints --> Set / Delete
    If u r already in the Debugging Mode Dont forget to click save once u set the Break point to get the breakpoint next time when u execute.
    awrd points if useful
    Bhupal

  • HI How  to set a Break point In Smart Forms

    Hi Guys,
    i want to set a break-point in main window of the smart form ,before dispalying
    values of the varibles in the main window .
    How to Set a break-point And What are the ways to set a break point.
    Thanks for All.
    From
    Hitu.

    Hi Hitu,
    Generally, Break Points are set for the purpose of debugging in Smartforms.
    For debugging , one of the way is :
    1. Write BREAK POINT in the code window.
    2. Put a break point on the call function in the driver program
    3. Put a break point in the generated Function module.
    Hope this resolves your query.
    <b>Reward all the helpful answers.</b>
    Regards

  • How to put page break in SMARTFORMS

    Hi Guys,
              Can anyone please let me know How to put page break in SMARTFORMS
    Regards
    Avi

    Hi,
    Look at the below thread, you will get the answer
    https://www.sdn.sap.com/irj/sdn/profile?userid=2522810
    Regards
    Sudheer

  • How to put Page break in SAP Script

    Hi Experts,
    Please tell me how to put page break in SAP Script. or give some sample code
    looking forward for your reply..
    Regards,
    Kali Pramod

    Hi,
      NEW-PAGE is used to insert a page break ,
      it can be conditional if used between IF..ENDIF
      e.g. /:IF &KNA1-NAME1& = 'XYZname'
            /:NEW-PAGE
           /:ENDIF
      If u want to Page break after displaying certain records or after some condition you use NEW-PAGE
    reward if useful.

  • Is any Userexit or BAdi or enhanc. point while create PO with reference .

    Hello Experts,
    Is there any Userexit or BAdI or Enhancement point while create P.O with reference .
    My requirement is while creating the P.O.(ME21N) with reference, The payment terms is getting copied from the reference P.O. and become grayed out (Non editable) instead of that user want the payment terms which we have maintained in (LFB1) Vendor Master.
    Please help me to resolve my problem.
    Edited by: Ketanp on Mar 7, 2012 11:48 AM

    Hi
    Try with badi ME_PROCESS_PO_CUST
    Regards
    Eduardo

  • How to place a break-point in update rules

    Hi All,
    Can any one let me know how to place a break-point in update rules. I used the hard code BREAK-POINT in the code, but it did not work out. After placing the BREAK-POINT in the update rules code, I executed the info package and the load was successful. In order to go into the debug screen can any one let me know the procedure.
    Regards,

    Hi,
    In the monitor screen goto "details" tab and under the "Processing" select the option "Data Package 1" and right click over that you can find an option simulate update.
    In that select the option "Activate Debugging in Update rules" and select "Perform Simulation".
    You can search for your code using the option ctrl+F and double click the code over there.
    now the breakpoint is set.
    Hopr this helps.
    Regards,
    K.Manikandan

  • How is the tax code determined while creating a new PO?

    Hello,
    how is the tax code determined while creating a new PO?

    HI,
    Tax code refers to a TAXINN /TAX INJ and it always at country level -where the business dealing happens and not dependent on any other factors like vendor or material, company code or plant. etc.
    So after you have maintained a Tax code in FTXP in the category as input Tax( V)  it would be appears in the Tab Invoice.
    where you could manually select the same
    For automatic determination as said in the top messages we can maintain an inforecord.
    hope so it helps
    Regards
    Anjanna.
    Edited by: Shiva Rajanala on Apr 28, 2009 5:03 PM

  • Badi/Enhancement to while creating a transport request

    Hi Friends,
    Please let me know if there any enhancement or Badi while creating a transport request to add a additional field while creating a transport request.
    I found below list of badis but are not relevant to my requirement
    CTS_EXPORT_FEEDBACK
    CTS_IMPORT_FEEDBACK
    CTS_INT_REQUEST_CHCK
    CTS_REQUEST_CHECK
    CTS_TASKDOC_TEMPLATE
    Thanks in advance

    solution removed, not correct.
    Edited by: vishal kapoor on Nov 28, 2008 2:41 PM

  • Error when creating a travel request with Advance amount

    Hi Gurus,
    When I create a travel request with an Advance amount and try to save the same, the system throws up an error msg : "Trip country does not exist in the system (T005).
    However, it allows me to create the travel request without this error if i dont enter any advance amount in the travel request.
    I checked the tables V_T706L and V_T706O and found my trip county to be existing.
    Regards
    Prakash

    Hello Prakash,
    The following are the prerequisites for transferring trip costs to accounting.  In other words when you try to create and save a travel request with advance you are involving accounting entries and therefore the following needed to be checked:
    1.Travel Management and Accounting are both at Release 4.5A. If at least one of the systems
    has a release level lower than 4.5A, follow the instructions in Customizing for ALE.
    2. For payment to be effected, vendor accounts must exist in Accounting for the respective
    personnel numbers.
    3. The following Accounting tables must be replicated in the Travel Management System using
    Customizing transports:
      Company Codes (T001)
      Countries (T005)
      Input Tax Codes (T007A, T007S)
      Document Types (T003)
    4. The transfer of settlement results
    More relevant in your case would be the point 3. Countries(T005) not defined in TM.
    Hope the above provided you more information.
    Rgds
    CONMJI

  • Error in creating a travel request

    Hi Experts,
    In portal i am trying to create a travel request but it is showing some 'Error during call of fuction module TRIP_WRITE_PERIO'.
    Checked this function module in ECC it is not an RFC function could it be the reason?
    I am new to EP could help me?
    Thanks in advance.

    Hi devika,
    Yes. The function module should be RFC enabled. Otherwise it will throw this error.
    Regards,
    Shyam.

  • BSP error while applying a Leave request in ESS

    Dear Friends,
    Reposting an issue which I posted earlier in ESS Forum as I didn't get solution there and the issue is more technical and moved towards Netweaver applications.
    While applying a leave request in ESS portal, I am getting an error page saying Business Server Page error.
    Checked related SPRO Nodes: Both ESS UI5 and ESS (Java) nodes. They are maintained. Being HCM Functional Consultant, this error I am not able to analyze anyway. So asking Portal /Netweaver experts here.
    Error screen attached-
    My earlier thread posted in ESS forum
    http://scn.sap.com/thread/3675714
    Expecting a quick solution for this as I am stuck in this issue for last 4-5 days .
    Regards,
    Niladri

    Sorted out . Detail can be seen in the Referal link. Closing this thread
    Regards,
    Niladri

Maybe you are looking for

  • Cancel Subscription doesn't work !!!

    1) On a expired Skype Number subscription, Skype keeps trying to charge the Credit Card 2) Even worse, it doesn't let the end user remove the Credit Card. It claims that it is required to cancel subscription first, but when the option is selected, no

  • Error Unable to lock your device in Muvo TxFm 1

    Hi, I have a muvo Tx Fm GB. during Firmware update?device Isshowing ERROR " Unable to lock your Device "?if any body know that how to remove this error, plz suggess...... Dev Kumar

  • [German] iPod Nano wird von iTunes/iPod Updater nicht erkannt aber läd

    Moin, ich habe das folgende Problem: mein Betriebssystem erkennt den iPod nicht als Wechseldatenträger und der Softwareupdater / iTunes erkennt den iPod ebenfalls nicht aber der iPod wird trotzdem aufgeladen. iPod: iPod Nano 4Gb Rechner: Windows XP (

  • Web Service Mapping

    Hi everybody, Just wanted to know, when mapping the operations if a web service interface to the Operation attributes of e.g the <receive> BPPEL element, how do we seperate the operations' name if we have more than one operation. i.e <receive .......

  • Do anybody know how to read file...

    Hello, I have a problem with reading config file. Do anybody know how to read config file from the same dir as class. Now the situation is like: filePath I hardcoded like: fileName = "C:\\apache-tomcat-5.5.17\\webapps\\ROOT\\WEB-INF\\classes\\config.