How to query the status of disk groups in specific time?

Dears,
While trying connect to database , i faced ORA-00257:archiver error. Connect internal only, until freed.
Also found in alert file ORA-15041: diskgroup space exhausted
And found in ASM alert file WARNING: allocation failure on disk DG_DATA_0002 for file 357 xnum 2147483648
I expected from above errors that the problem in ASM Disk groups or in file system space.
After checking, found every thing is fine and OK as i have much free space.
And when i tried after some time to connect to database, it connected successfully without errors.
It means that the problem not in space,may be the status of disk groups became invalid for some time
Appreciate your advise. And how can i know the status of disk groups in specific time?
Thanks & Regards,,

Hi All,
We got another idea to create new template and use it as "Current Default Workbook".
Then it is showing latest date as we changed one of the Text element from "Display Status of Data" to "Display status of Data To".
But the this change is showing to my user id only but not to the other users.
We are selecting the tick mark for "Global Default Workbook", but this tick mark is going away after each refresh. I think if this tick mark is holds permanently, my problem will solve.
Please suggest me if you have any ideas to resolve this issue....

Similar Messages

How to move Tablespace from One disk group to another disk group in RAC

Hi All,
I have 11gR2 RAC env on Linux.
As ofnow I have problem with disk group. I have 3 disk group which is almost full - 98%. I have added one NEW disk group and want to move some of the Tablespace(TBS) from OLD disk group to NEW diskgroup and make some free space in OLD disk group.
Can any one suggest me how to move TBS from one disk group to another disk grup without shutting down the instance.
DB is in Noarchive mode.
Thanks...

user12039625 wrote:
Hi Helios,
Thanks for doc id but I am looking for noarchive mode solution. becaues I got ORA-
"ORA-01145: offline immediate disallowed unless media recovery enabled " when run alter database datafile '...' offline.
Hence I am trying something and findout below steps but not sure how useful it is:
1- put tablespace offine
2- Copy the file to new diskgroup using Either RMAN or DBMS_FILE_TRANSFER.
3- Rename the file to point to new location.
4- Recover the file.
5- Bring the file online.
I had move 240M TBS from OLE to NEW.
These steps run successfully so I think this is valid for noarchive mode.Hence want to confirm..so inform me please.
Thanks :)I have doubt in my mind:
1. You database is in noarchivelog mode
2. You're taking tablespace offline
3. Suppose you're moving a file of size 10GB(or any larger filesize) to another disk group
4. Now after moving the file, you're trying to bring the tablespace online............NOW
tablespace will need recovery. if the required data is inside the SGA then it is ok. But if the data has been flushed, then?
if step 2 and 3 has taken significant time, then most probably you'll not be able to bring that tablespace online.
Regards,
S.K.

How to increase size of a Disk Group in ASM?

Hi,
I'm testing the ASM in AIX. I created a Logical Volume with size is, e.g., 10G. Then I assign this LV with a Disk Group in ASM. Now I increase the size of the LV using AIX's smit, e.g., to 20G. How can I increase the size of my Disk Group in ASM?
I understand that Oracle recommend to assign a whole physical hard disk to a Disk Group in ASM.Thus, the resize command of ASM can only reduce the size of Disk Group, but cannot increase the size of it?
Any advice?
Pham

Disk Group is a logical term, phyical size of a diskgroup is determined by the disks belonging to a diskgroup. So you cannot increase a diskgroup, only the disks in it. You can resize a disk up to its physical limit (resize option of ALTER DISKGROUP statement).
Werner

How to find the status of package (valid/invalid) was at a particular time

How to find the status of package (valid/invalid) was at a particular time ?
I want to find the status of one oracle package at 3pm yesterday. The status of this package today is INVALID.
I am sure it was VALID yesterday. But no way to prove it. Can any one help please???
I can generate AWR report for last 7 days...

Try using a flashback query, like this:
select object_name, object_type, status
from dba_objects AS OF TIMESTAMP (SYSTIMESTAMP - INTERVAL '18' HOUR) -- 18 hours ago
where object_name = 'MY_OBJECT'
;if you haven't granted FLASHBACK privs, you may need to connect as SYS to do a flashback query on a data dictionary table.
But this should give you the info you need - if it's still in undo.

How to change the status of a production order

Dear All,
May i know how to change the status of a production order.I want to de-active the status like OPGN (Operation generated).This status is updated as there was no routing assigned to that particular production order during its creation
Thanks and Regards,
Varun Siddharth

Dear,
When you create a production order, an operation created by the system is generated automatically if no routing is used for the creation. As a result the order header receives the status HOGAN; the operation created automatically also has this status.
If you delete the operation created automatically and then do not have the status HOGAN.
To avoid this maintain the Routing for the material or delete the setting of default operation from OPJG.
Regards,
R.Brahmankar

How to run the Invoices in different groups within the batch in AP

Need to know that how to run the Invoices in different groups within the batch. This will be of very helpful when we deal with lot of lines under one batch. (e.g) like somewhere we issued a Corporate Card to all the employees Via Bank Of America. Every Month they will send the complete details of all the employees who ever swiped the corporate provided BOA. Accordding to Natco all those lines should be loaded as One Invoice so that a Single Payment can be provided to BOA and it will also makes their life easier. This standard program sometimes it works normal sometimes it will run like a TORTOISE. So thats why in the manual they suggested to use GROUP ID to split the Invoice Load.
So plz tell me how we can run it
plz give me the solution
thanks

can you give me some material or document on that so that i can read actuaaly i need to make doc on it..

How to change the Status CRTD of the Inspection Lot?

Dear all.
I want to Complete an Inspection Lot 10000000005 In the T-CODE qvm2.When I select the Inspection Lot 10000000005 and press F8 to Complete the Inspection,the SAP show an error message "Status check error".
And the detail info show that the error was cause by the Status CRTD of the Inspection Lot.I check the Status of the Inspection Lot 10000000005 and found that it's Status was CRTD CHCR SPRQ.My question was how to change the Status CRTD of the Inspection Lot?
Regard
Yoda

Hi
CRTD means ...
In material master QM vew-inspection setup->Inspect with task list tick is there.
Now to change status,
Go to Qp01>create a task list for material(If not exists)>remember date of creation of task list must be prior to date to creation of inspec lot
If task list is created/exists>go to QA02.<inspection specification -->click on Inspec Spec
and attach task list
go to sample tab....click on sample.
Now save it.
Status will change to REL
Regards
Sujit

How to change the status in the table kssk

Hi ,
In document management system - for a doc type pdf, I am maintaing the class (cl_xxx) in img setting. some charateristics are assigned to that class (with entry required).
My problem is While creating the document (cv01n). I am not assigning the value for that char ( i.e in addition data), eventhough it is mandatory .
In the table kssk , For that particular document , status is set to 5 . how to change the status .
note :
In cv04n - if i search wrt to that charateristic in the classification tab. i am not able to get the value.
Please help me to solv the problem.
Regards,
Rani.

hi you can do like this also if it is a test server..and y had the authoridation..
togo the table -supposekkkk-execute-select a particular record--double click it ---then it will display it in the vertical line..
then put /h in the tcode listbox and put enter--debugg it and change this if code = 'SHOW' as EDIT. execute it and change it and save it..
regards,
venkat.

How to change the status of Serial number

Hi Experts,
Would you please help in solving this problem.
How to change the status of Serial number?
I have material stock in a storage location: recieved from Intercompany through outbound delivery, when PGIed material document is created when I am checking the serial numbers of the recieved ones status of the serial numbers are ESTO, I want that into AVLB.
How can we do that?
Regards
Sri

Hi,
Go to IQ02 on Header tool bar you will find edit(2nd option on header tool bar) => edit manually=> Click from Customer=> and then to Stock you will find the expected results...
Generally Serial number Status use to change along with the movement of material linked with that serial number... So if you are changing serial number with manual trasaction then please remove all the details from IQ02 like plant storage location Batch and master batch so that i will not provide you error while doing next transactions.
Regards,
Ninad Kshirsagar

How to change the status of updated record?

Hi All,
how to change the status of updated record?
new record should be active version(X) and old version will be deleted.
Plz suggest..
Thanks in advance...

Steve,
In the actual question, you mentioned that the old record needs to be deleted and hence the solution provided.
Now, you are talking about field. May I know which field are you talking about??
Jst get in to ABAP Editor and try debugging the code with the solution provided and let us know if that is working fine or not.
Also, I recommend you to take a look at the transaction ABAPDOCU. There you wil find hell lot of examples explaining all the scenarios. You will get a good idea .
Please check that and try to implement it yourself. You will be able to make it after doing mistakes.
If you stuck up again after many attempts, paste your code here. We will help you out
Hope you got my concern.
Thanks,
Babu Kilari

How to change the status of IDOCS from 29 status to 53

Guys
how to change the status of IDOCS from 29 status to 53
Thanks in advance

Hi Krishna
IDOC_STATUS_CONVERT Use this FM and reward me

How to change the status of test cases in Test Plan from Design to Ready using Excel VBA

HI,
How to change the status of test cases in Test Plan from Design to Ready using Excel VBA

Thanks Florin,
Your piece of code has worked alot, and it was very helpful in changing the Status of the Workitem to "READY" for all the Users fo the workitem.
Points have been rewarded for your help.
Process: We have acheived this using the "Work Item Exits", Usng "AFTER_EXECUTION" Method.
Note: The Exit will be executed if "exit_cancelled" statement is present/used in the work item method. if not it is not taking to the exit code. I'm unable to find the reason for it. Florin can u please explain this point.
Please check the link for adding the code in Work Item Exits.
http://wiki.sdn.sap.com/wiki/display/ABAP/ProgramExitsIn+Workflow
Please find the Code:
method IF_SWF_IFS_WORKITEM_EXIT~EVENT_RAISED.
Get the context of the workitem
me->wi_context = im_workitem_context.
After execution of the workitem call the method AFTER_EXECUTION
if im_event_name eq swrco_event_after_execution.
    me->after_execution( ).
endif.
endmethod.
METHOD AFTER_EXECUTION.
This method acts as the Event Handler for SWRCO_EVENT_AFTER_EXECUTION
DATA: LCL_L_WID TYPE SWW_WIID,
        L_STATUS TYPE SWR_WISTAT-STATUS,
        L_NEW_STATUS TYPE SWR_WISTAT,
        L_SWR_MESSAG TYPE STANDARD TABLE OF SWR_MESSAG,
        L_SWR_MSTRUC TYPE STANDARD TABLE OF SWR_MSTRUC.
Get work item
CALL METHOD WI_CONTEXT->GET_WORKITEM_ID
    RECEIVING
      RE_WORKITEM = LCL_L_WID.
L_STATUS = 'READY'.
CALL FUNCTION 'SAP_WAPI_SET_WORKITEM_STATUS'
    EXPORTING
      WORKITEM_ID    = LCL_L_WID
      STATUS         = L_STATUS
      USER           = SY-UNAME
      LANGUAGE       = SY-LANGU
      DO_COMMIT      = 'X'
    IMPORTING
      NEW_STATUS     = L_NEW_STATUS
     RETURN_CODE    = SY-SUBRC
    TABLES
      MESSAGE_LINES = L_SWR_MESSAG
      MESSAGE_STRUCT = L_SWR_MSTRUC.
IF SY-SUBRC EQ 0.
ENDIF.
ENDMETHOD.
Thank You Once Again,
Ajay Kumar Chippa

How to get the status of service in rac

Dear all,
how to get the status of service in rac.
SQL> show parameters service;
NAME                                 TYPE        VALUE
service_names                        string      DEVDB, DEVDB1, devdb
[oracle@rac1 ~]$ srvctl status service -d devdb -s devdb
PRKO-2120 : The internal database service devdb cannot be managed with srvctl.

user7244870 wrote:
Dear all,
how to get the status of service in rac.
SQL> show parameters service;
NAME                                 TYPE        VALUE
service_names                        string      DEVDB, DEVDB1, devdb
[oracle@rac1 ~]$ srvctl status service -d devdb -s devdb
PRKO-2120 : The internal database service devdb cannot be managed with srvctl.
Internal services cannot be managed with srvctl utility. Check if you have any user defined service in dba_services
SQL> desc dba_services
Name                                      Null?    Type
SERVICE_ID                                         NUMBER
NAME                                               VARCHAR2(64)
NAME_HASH                                          NUMBER
NETWORK_NAME                                       VARCHAR2(512)
CREATION_DATE                                      DATE
CREATION_DATE_HASH                                 NUMBER
FAILOVER_METHOD                                    VARCHAR2(64)
FAILOVER_TYPE                                      VARCHAR2(64)
FAILOVER_RETRIES                                   NUMBER(10)
FAILOVER_DELAY                                     NUMBER(10)
MIN_CARDINALITY                                    NUMBER
MAX_CARDINALITY                                    NUMBER
GOAL                                               VARCHAR2(12)
DTP                                                VARCHAR2(1)
ENABLED                                            VARCHAR2(3)
AQ_HA_NOTIFICATIONS                                VARCHAR2(3)
CLB_GOAL                                           VARCHAR2(5)http://docs.oracle.com/cd/B19306_01/rac.102/b14197/srvctladmin.htm

How to disable the status icon in Skype 4 for Andr...

Dear Skypers,
How to disable the status icon in Skype 4 for Android phones?
The guide on this following support page not working anymore: https://support.skype.com/en/faq/FA12359/how-do-i-enable-or-disable-the-status-icon-in-skype-4-for-a...
Older version has the option to disable Skype Status and get rid of the Skype icon on Android status bar. But latest 4.4.0.31835 could not disable Skype Status in notifications settings. :/
Device: Google Nexus 4
Android: 4.3 JWR66Y
Skype: 4.4.0.31835
Please bring back the option to disable the Skype icon on Android status bar. This is the main reason I uninstall Skype. :/
Kudos to the team, the apps is really smooth and fluid to use. Would be nice if you guys are following the Android Design Principles and using Google Cloud Messaging for push notification to improve User Experience and battery life.
Kind regards,
/chrone
everytime i get ahead, i feel more dead.
Solved!
Go to Solution.
Attachments:
how to get rid of skype icon on android status bar.png ‏46 KB

Long click on this notification a sub menu having field "App info" would appear goto App Info. You can goto there by "Manage Apps">"Skype" also.
Uncheck Option "Show Notifications" A dialog will open. Don't worry about notifications for now just click OK. Now the notification icon skype has also been removed.
Now simply check "Show notification again". After doing this you would get notifications but skype icon would not be shown in the status bar anymore.
Issue: this is just a trick you need to repeat this every time sign out and sign in again. Mostly you don't do that so no need to worry.

How to set the status for a customer plan to RELEASED.

Hello all,
I created a program for mass creation of customer plans. But after the creation of a plan, the status should be set to released, so that the user can go about creating the trade promotions for the customer plan. Can anybody tell me how to set the status of a customer plan to RELEASED.
Thanks,
Disha.

Hi Clemens,
I am not talking about doing it in the CRM_UI transaction..I created a program..which would create the customer plans based on the planning account data provided. I was succesfull in creating the plans, but I am not knowing how to release it, if only anybody can tell me about a Function module or method, which can help me do this, that would be great
Thanks,
Disha.

How to query the status of disk groups in specific time?

Similar Messages

Maybe you are looking for