How to raise customer invoice in case of third party sale from PS

Dear All,
           In case of third party sale from project systems module, PR is raised which is further converted to PO and once the material reaches at client place GRN is done.Based upon the GRN the actual cost is booked to the project.How should I raise the customer invoice against the materials received by the customer?
I went through the Forum and based upon the threads there, I came to know that one option is to  create sales order for the same items and do order based billings.But for this I have to enter the same materials items again in the Sales order which is nothing but duplicacy of data.
Is there any alternative to this? Or some other way by which the PO line items be copied to sales order so that I can save time while creating sales order.
Regards,
B P Singh

Hi Virendra,
                   Business scenario is like this.
I have created project and activities.Have assigned materials as 3rd party sale in NWA. I have released the project.PR are getting followed by PO.On doing the GR the actual costs are getting booked on NWA.
My concern is how to bill the Items(the same material components) which are assigned to activity.
As per your input I need to do Resource Related billing.Thanks for the input.It is no longer required to assign materials in DIP to Carry out RRB. 
To carry out RRB do I need to create Sales Order first ? If  No then how to do RRB? If Yes  I need to create a Sales Order with all the material components which I have assigned at activity level. So I was looking for some alternative so that SO creation becomes less tedious.
Regards,
B P Singh

Similar Messages

  • Excise configuration in case of Third party sales

    In case of third party sales of a excisable material, where the goods are supplied directly to customer by the vendor.
    However the customer invoice is sent to the customer my organization
    How will the excise entries take place?
    Because in this case goods are not supplied from my depot, Also i need to charge the customer for excise, since the goods are excisable.
    Can I claim the excise benefit for the above sale process?
    Please revert
    Regards
    Sudhir Chavan

    As the goods are not delivered from your factory premise and are delivered for vendor.
    Means in system there is no outward goods movement from your plant.
    So, logically you should not create Excise invoice for this.
    But, you may need to consider VAT/CST based on the sales.
    And that doesn't require any excise invoice.
    Thus, no requirement of Excise configuration in case of Third party sales.
    Yes, from procurement point of view, you would be paying excise to the vendor for this purchase.
    Regards
    JP

  • Cant create customer invoice without MIRO in third party

    Hello There ,
    This is third party scenario
    I Have set  Billing relevance "F" in the parameter of item categary  of third party which help me in updating the status of sales order as completed as soon as first invoice gets created.
    but this Billing relevance 'F' only supports to create customer invoice only when invocie receipt(MIRO)
    is created then only we can create the customer invoice.
    My requirement is to create the customer invoice on the basis of MIGO quanity not on the MIRO quantity.
    And sales order Status should be completed as soon as the invoice gets
    created.
    Because MIRO will be created in future date.
    Whenever i try to create customer invocie after MIGO it throws as error that " Order is not relevant for billing"
    In other words it asks me to create MIRO document. As soon as i create MIRO document  , system will allow me to create customer invocie.
    Please help me in this.
    I want to create customer invoice after MIGO and before MIRO in case of third party while billing relevance is u2018Fu2019 in  item category.
    If you have any idea about this scenario, Please help me in this .
    Thanks,
    Vaibhav Yawale

    HI Ravi,
    Here the problem is My client they dont create customer invoice of total quantity.
    Flow is like this -
    Sales order       PO Quanity       MIGO              Invocie             MIRO
    1000LBS            1000 LBS         850 LBS         850 LBS          850 LBS
    Here in this scenario  they are going to deliver only 850 LBS .Rest 150 they will never deliver.
    So the status should be completed as soon as first invocie of quantity 850 LBS is created.
    Please guide me on this ,
    Thanks,
    Vaibhav Yawale

  • How to raise all invoices based on Ship-To-Party

    Hi SD Guru's,
    Could you please tell me how to raise invoices on Ship-To-Party?
    I know in standard all invoices will be raised against Sold-To-Party.
    I know i can manually go in the sales order and change the Bill -To-Party  to same as Ship-To-Party.
    But is there some standard setting so that all my invoices are raised again Ship-To-Party without any manual intervention.
    Regards
    Ravi

    hello, Ravi.
    the most logical thing to do is to make your ship-to party also as the bill-to or the payer.  because if the bill-to isn't the one being billed and the payer isnt the one paying, why maintain them in the first place?
    however, you can define output condition types that when the billing document is created and saved, the ship-to is sent a copy of the invoice.
    regards.

  • How to consume a web service provided by third party system from SAP system

    Hi Friends,
    Could any of you provide me a clear picture on how to consume a web service from SAP system and is provided by a third party system?
    Do we get an URL to create a client proxy for consuming the web service?
    Thanx in advance,
    Ram

    Hi Ram,
    of course you cannot supply the WSDL URL. Inside the WSDL (just view it in your browser) you find (usually but not necessary) towards the end something like
    <soap:address location="http://www.weather.gov/forecasts/xml/SOAP_server/ndfdXMLserver.php"/>
    which is the actual adress of the service.
    An example service can be found here:
    <a href="http://www.weather.gov/xml/">National Digital Forecast Database</a>
    containing the WSDL URL at
    <a href="http://www.weather.gov/forecasts/xml/DWMLgen/wsdl/ndfdXML.wsdl">this address</a>.
    You might also want to browse for the amazon webservices which allow you to embed queries against amazon into your application.
    have fun,
    anton

  • How can we get purchase req. no in third party sales order

    Hi,
    I am creating third party order scenario, where i can get purchase req. no in third party sales order.
    Regards,
    M B Raju

    HI
    Once you save the Sale order then go to VA02
    Double click on the Line item , click on the schedule line tab
    under Schedule line tab  you can see the Purchase Req. number
    Regards,
    Prasanna

  • Proforma invoice for third party sales order

    Hi,
    How can we create a proforma invoice F5 and then standerd  invoice F2 to a third party sales order.The billing relevance for TAS item category is set to B i.e.Relevant for order-related billing - status acc.to order qty
    Points will surely be ragarded.
    Regards
    Edited by: Mrunal Ambatkar on Mar 5, 2010 5:00 PM

    Hi,
    Please check whether copy control (VTFA) settings between Sales order type (OR) and Proforma Invoice (F5) is avaiable.
    If there is copy control setting available you can create the Proforma Invoice based upon sales doc type.
    regards
    Vivek.

  • In Third Party sales order processing how we come to know that the customer

    Hi SAP SD Gurus,
    In Third Party sales order processing how we come to know that the customer is recived the Goods from the vendor?
    Thanks & Regards,
    Sreenivas.P

    From a high level view, the behavior should work like this:
    -  Sales order placed from customer PO via Tcode VA01. Purchase Requisition created upon saving the order
    -  Purchase order created with reference to Purchase Requisition via Tcode ME21N
    -  Receive confirmation from vendor that goods have shipped via EDI
    -  Create invoice receipt to vendor via Tcode MIRO
    -  Create billing document to bill customer via VF01

  • How Billing doc.created from purchase invoice in Third Party Sale

    Hi All
    Our client requirement  has been mapped as sap third party sales process .
    But if the vendor is delivering less qty .  than the qty. for which Sales ordered  has been  created, How to create the  Sales billing Doc.  according to the purchase invoice so that Sales Billing  Doc. should be created for the delivered qty. only .
    Please suggest the configuration  & how the data is flowing from the Purchase Invoice to the Sales Invoice.
    Thanks in advance
    Ashok

    Hi
    you can achieve your requirement by following
    T-Code  VTFA (copy control Order to Billing)
    use you Third party order type and billing type
    Go to Item category (if Standard use TAS)
    there is a option "BILLING QUANTITY"
    user there "E" Goods receipt quantity less invoiced quantity"
    Hope it will solve your problem
    Cheers
    Shambhu Sarkar

  • Third party sales how customer address copied to Purchase Requisition

    Dear All,
    Third party sales  customer address copied to Purchase Requisition, How this is happening and Where is the confirugation setting, Is it MM or SD related.
    Regards
    Sudarshan

    Hi,
    configuring thrid partyIt is related to MM, but its significance is there in SD as well.
    The address of the customer is copied from the coustomer master data, through sales ordeer.
    reagrds.
    DSR
    Edited by: D.Srinivasa Rao on Nov 7, 2011 1:48 PM

  • How will i configure third party sales order

    pls tell me how will i configure for third party sales order

    dear,
    prasanta,
                  the configuration of third party sales order is given below
    Process Flow for 3rd Party Sales
    Customize the third party sales in summary:
    1. Create Vendor XK01
    2. Create Material – Material Type as "Trading Goods". Item category group as "BANS".
    3. Assign Item Category TAS to Order type that you are going to use.
    4. A sale order is created and when saved a PR is generated at the background
    5. With reference to SO a PO is created (ME21N). The company raises PO to the vendor.
    6. Vendor delivers the goods and raises bill to company. MM receives the invoice MIRO
    7. Goods receipt MIGO
    8. Goods issue
    9. The item cat TAS or Schedule line cat CS is not relevant for delivery which is evident from the config and, therefore, there is no delivery process attached in the whole process of Third party sales.
    10. Billing *-- Seema Dhar
    SD - 3rd party sales order Create Sales Order
    VA01
    Order Type
    Sales org, distr chnl, div
    Enter
    Sold to
    PO #
    Material
    Quantity
    Enter
    Save
    SD - 3rd party sales order View the PR that is created with a third party sales order
    VA01
    Order Number
    Goto Item Overview
    Item ->Schedule Item
    SD - 3rd party sales order View the PR that is created
    ME52N
    Key in the PR number
    Save
    SD - 3rd party sales order Assign the PR to the vendor and create PO
    ME57
    Key in the PR number
    Toggle the "Assigned Purchase Requisition"
    Execute
    Check the box next to the material
    Assign Automatically button
    Click on "Assignments" button
    Click on "Process assignment"
    The "Process Assignment Create PO" box , enter
    Drag the PR and drop in the shopping basket
    Save
    SD - 3rd party sales order Receive Goods
    MIGO_GR
    PO Number
    DN Number
    Batch tab , click on classification
    Serial Numbers tab
    Date of Production
    Flag Item OK
    Check, just in case
    Post
    Save
    SD - 3rd party sales order Create Invoice
    MIRO
    Invoice Date
    Look for the PO , state the vendor and the Material
    Check the box
    Clilck on "Copy"
    Purchase Order Number (bottom half of the screen)
    Amount
    State the baseline date
    Simulate & Post
    Invoice Number
    *Invoice blocked due to date variance
    SD - 3rd party sales order Create a delivery order
    VL01N
    In the order screen , go to the menu Sales Document , select "Deliver"
    Go to "picking" tab
    State the qty and save
    SD - 3rd party sales order Create a billing document
    VF01
    Ensure that the delivery document is correct in the
    Enter
    Go to edit -> Log
    Save
    in third-party order processing, your company does not deliver the items requested by a customer. Instead, you pass the order along to a third-party vendor who then ships the goods directly to the customer and bills you. A sales order may consist partly or wholly of third-party items. Occasionally, you may need to let a vendor deliver items you would normally deliver yourself.
    Process Flow
    the processing of third-party orders is controlled via material types. Material types define whether a material is produced only internally can be ordered only from third-party vendors, or whether both are possible. For example, a material that is defined as a trading good can only be ordered from a third-party vendor. However, if you manufacture your own finished products, you may also want, from time to time, to be able to order the same type of product from other vendors.
    Processing Third-Party Orders in Sales
    Third-party items can be created automatically by the system, depending on how your system is set. However, you can also change a standard item to a third-party item during sales processing manually.
    Automatic third-party order processing:-
    if a material is always delivered from one or more third-party vendors, you can specify in the material master that the material is a third-party item. During subsequent sales order processing, the system automatically determines the appropriate item category for a third-party item: TAS. To specify a material as a third-party item, enter BANS in the Item category group field in the Sales 2 screen of the material master record.
    Manual third-party order processing
    In the case of a material that you normally deliver yourself but occasionally need to order from a third-party vendor, you can overwrite the item category during sales order processing. For a material that you normally deliver yourself, you specify the item category group NORM in the material master.
    If, as an exception, you use a third-party material, change the entry TAN to TAS in the ItCa field when processing the sales document. The item is then processed as third-party item.
    If address data for the ship-to party is changed in the sales order in third-party business transactions, the changed data will automatically be passed on to purchase requisition and also to the purchase order ,if one already exists. In the purchase order, you can display the address data for the ship-to party in the attributes for the item.
    You can only change the address data for the ship-to party in the sales order for third-party business transactions, and not in the purchase order.
    Processing Third-Party Orders in Purchasing
    when you save a sales order that contains one or more third-party items, the system automatically creates a purchase requisition in Purchasing. Each third-party item in a sales order automatically generates a corresponding purchase requisition item. During creation of the requisition, the system automatically determines a vendor for each requisition item. If a sales order item has more than one schedule line, the system creates a purchase requisition item for each schedule line.
    Purchase orders are created from purchase requisitions in the usual way. For more information about creating purchase orders, see the Purchasing documentation. During creation of the purchase order, the system automatically copies the delivery address of your customer from the corresponding sales order. In a sales order, you can enter purchase order texts for each third-party item. When you create the corresponding purchase order, the texts are automatically copied into the purchase order. The number of the purchase order appears in the document flow information of the sales order.
    All changes made in the purchase order are automatically made in the sales order as well. For example, if the vendor confirms quantities and delivery dates different from those you request and enters them in the purchase order, the revised data is automatically copied into the sales order
    you process third-party items by creating a normal sales order. In overview for the order, you can then overwrite the default item category (TAN in the standard system) with the special item category for third-party items: TAS
    Billing Third-Party Orders
    If relevance for billing indicator for the item category has been set to B (relevant for order-related billing on the basis of the order quantity) in Customizing, the system includes the order in the billing due list immediately. If, however, the indicator has been set to F (relevant to order-related billing on the basis of the invoice quantity), the system does not include the order in the billing due list until an invoice from the vendor has been received and processed by the purchasing department. In the standard system, item category TAS (third-party order processing) has been given billing-relevance indicator F.
    In the first case, the third-party order is considered to be completely billed only when the invoiced quantity equals the order quantity of the sales order item. In the second case, each time a vendor invoice is received, a customer invoice is created for the quantity in the vendor invoice and the order is considered to be fully invoiced until the next vendor invoice is received.
    If you have activated billing-relevance indicator F for item categories in Customizing, billing can refer to the goods receipt quantity instead of the incoming invoice quantity.
    You can control whether the invoice receipt quantity or the quantity of goods received is relevant for billing in Customizing for copying control for billing at item level.
    FOR YOUR PROCESS Individual Purchase Orders WELL GIVE THE RIGHT SOLUTION
    Individual purchase orders are used when your customer orders goods from you that are not in stock and must be ordered from one or more external vendors.
    Process Flow
    During sales order entry, the system automatically creates a purchase requisition item. The purchasing department creates a purchase order based on the requisition and the vendor ships the goods directly to you (unlike third party order processing, where the vendor ships directly to your customer). You then ship the goods to your customer. While the goods are part of your inventory, you manage them as part of the sales order stock. Sales order stock consists of stock that is assigned to specific sales orders and cannot be used for other purposes.
    Process Flow for 3rd Party Sales
    Customize the third party sales in summary:
    Prerequisites for 3rd party sales,
    Purchasing org,
    purchasing group,
    assign the Purchase org to company code
    assign Purchase org to plant,
    should not maintain the stock in material, it should be trading goods,
    1. Create Vendor XK01
    2. Create Material – Material Type as "Trading Goods". Item category group as "BANS".
    3. Assign Item Category TAS to Order type that you are going to use.
    4. A sale order is created and when saved a PR is generated at the background
    5. With reference to SO a PO is created (ME21N). The company raises PO to the vendor.
    6. Vendor delivers the goods and raises bill to company. MM receives the invoice MIRO
    7. Goods receipt MIGO
    8. Goods issue
    9. The item cat TAS or Schedule line cat CS is not relevant for delivery which is evident from the config and, therefore, there is no delivery process attached in the whole process of Third party sales.
    10. Billing *--
    i think it will fulfill your requirement if so plz reward point.
    ambarish

  • Third party sale-how to GI GR simultaneously in outbound delivery

    VA01 - Item cat:TAS/ sch.line cat- CS- with which automatic PR will be created,
            schedule line- bussiness data :item category =blank , acct assgt cat. =M .movement type =601 .
           item category;  special stock = E.
    ME21N wrt: PR generated in step-1
    vl01n - assignment of Purchase order in outbound delivery
    vl02n - carry out at the same time a goods issue (referred to the delivery) and a goods receipt (referred to the PO).
    MIRO - verifying vendor invoice.
    VF01- wrt: sales order created in step-1
    in this case, my process is not like the stander third party sale.
    How to config the sap to GI and GR simultaneously in the the t-code "vl02n"?
    and GI and GR is all related to the "E" stock?
    thanks a lot.
    Edited by: cai_yu on Mar 21, 2010 12:38 PM

    Hi,
    In third party sales there is no outbound delivery take place, our vendor ships material to our customer,
    Process :
    Create sales order >> PR >> P.O >> Invoice reciepts >> Invoice to customer
    Still if you want to carry our that goods you recieved & want to perform outbound delivery then you can still able to configure it, but simplest way is just Determine item category TAB instead of tas in sales order
    Process
    Sales order >> PR >> PO >> Goods reciepts - MIGO >> Invoice reciepts - MIRO >> Outbound delivery >> Invoice to customer.
    Kapil

  • Third party returns from customer to vendor (Urgent)

    Hi,
    We have an urgent requirement regarding an issue with third party returns from customer.
    The scenario required is as follows :
    When the customer returns the goods in Third party proccess the goods should be directly returned to the vendor instead of receiving into our plant .
    How can we map this bussiness proccess?
    Currently the returns are handled as per the standard SAP proccess ie.,
    Customer returns the goods> Return order is created>Return delivery created (PGR)>Credit memo created.
    In this case we are receiving goods into our plant .

    Hi Shrikant
    1. If delivery of goods is the only issue then you can ask customer to make invoice with Invoice to your company address and Delivery address as the vendor address. Practically it is possible.
    2. Then you can make corresponding entries in SAP and regularise it.
    Thnx
    Nilesh

  • In third party sales order process how  business come to know that the vend

    Hi SD Gurus,
    In third party sales order process how  business come to know that the vendor has delivery the goods to the customer?
    Where Business will check whether Vendor has delivered the goods or not to the customer?
    Thanks & Regards,
    Nivas

    Hi,
    Process
    VA01 - Create sales order (Schedule line CS and item category TAS) >> ME52N - PR is generated after save of sales order >> ME21N - Convert PR in to P.O >> Then vendor will send goods to customer and will send invoice to our company >> MIRO - Invoice receipt from vendor >> VF01 - Final invoice to customer
    When you enter vendor invoice then you come to know that vendor sent qty. same will be billed to customer(Billing relevance in item category should be F)
    Kapil

  • Payment Terms in Third Party Sales Invoice.

    Hi Experts,
    We are facing the problem in third party sales process.
    Suppose X is our customer and Y is our vendor, here Y is supplying the material directly to X and Y sending us the bill of entry and other documents to us, and then we create the sales invoices to X, we are following all process like first we create SO to X then with the PR we create PO to Y then we do migo and miro of vendor invoices then creating the sales invoice to X.
    The main problem is that we want that the payment due date to our customer invoice starts from the vendor bill of lading date which we enter at the time of migo and miro (document date), but in our system, in sales invoice to X, system is calculating payment terms which we have entered in the customer master of X.
    How to get above functionality activated in sap.
    Regards
    Rajeev Gupta
    Message was edited by: Rajeev Gupta
    Please somebody reply.

    Can somebody reply this query.
    Thanks

Maybe you are looking for

  • Ipod touch 2nd gen not connecting to mail now-any anwers?

    My iPod Touch 2nd Generation can no longer connect to my email (formerly MobileMe account). I am running iOS 4.2.1 Why can I not suddenly connect to my email? It asks me to create account with MobileMe, which I already have. Every time I try to put i

  • Error - No permitted payment method exists

    Hi guys, I'm trying to create a Automatic Payment Transactions (transaction F110) using Custumer account. In the job log, the system displays the error message: > No permitted payment method exists. If I edit the proposal and reallocate the document,

  • Iphone is locked unable to access

    iphone is locked unable to access says to connect to itunes but that tells me to enter my password.

  • Youtube and itunes app refuse to work

    I've got an ipod touch .. And i have wifi at home I am able to use safari but itune store and youtube features refuse to work every time i click on the youtube and itune icon it tells me : '' cannot connect to Youtube or cannot connect to Itune '' I

  • Tethering option in Lightroom 3

    I am using Lightroom Beta 3 that expires at the end of this month and I'm excited about the new tether feature that is now part of LR3. The Beta version doesn't support saving to my Nikon D700's CF card, but will save to the hard drive. Can anyone te