How to Rapidly Switch 'Sections' in Develop Solo Mode

This is really a question affecting my MAC Air, which only has 900 pixels height.
I have solo mode turned on so only one Develop Module Section (e.g. Basic, Tone Curve, HSL ... etc) is expanded by the disclosure triangle at a time. However, when I want to switch from, say Basic to Detail, (which is further down the screen), I have to move the mouse/trackpad over to the right, scroll down, position and then open the disclosure for Details. when done Sharpening, must do a similar procedure to move back to Basic to touchup the Clarity.
What I'd like to know is if there are some shortcut keys (OMG we need more !!!!!), that would allow you to switch to different Sections within the Develop module. In this case, THESE would be worth remembering..... I know about K, and R, Q and M ... etc but those just get you to the brushes/grads/and cropping
Anybody got any ideas on this ?

CTRL - 1 to 8
for Mac Command 1 to 8 ?
Frans

Similar Messages

How do I switch my phone to transfer mode when USB is connected to my computer?

How do I switch my phone to transfer mode when USB is connected to my computer?

you should get a notification at the top of the screen for a usb connection. pull it down & select mass storage.
in my computer or windows explorer, you'll see motorola as the next available drive after the hard drive, cd, dvd, etc.
click to open & the sd card can be viewed.

How do I create sections in page layout mode?

The "section break" option is always greyed out in page layout mode.
But I want to create a newsletter with a cover page and then the other three pages will have different headers and footers and I want repeating images on them. This would seem to be quite normal for newsletters. Even the template newsletters do this, but they do do it manually, repeating the images for each page, and manually creating a header and footer for each page.
I can do it word processing mode, but this is a page layout task - as indicated by Apple including the newsletter templates in the page layout templates.
Is there anyway to create sections in page layout mode??

If you compare Page Layout mode with Word Processing mode, you'll see that every page is a separate section.
In Page Layout, you've got headers & footers, although it's possible some of Apple's Page Layout templates have it turned off, and you can turn off "Use previous headers & footers" on the first page after your cover page, so it seems to me like it's possible to do what you're trying to accomplish.
A "section break" is a special character you place in the body text of a word processing document to force a new section (see also: page, column, layout, paragraph, and line breaks). In Page Layout, there is no body, and sections/pages are controlled by the Page Thumbnail View.

When viewing a note in the bridge how do you switch to landscape full screen mode?

When viewing notes in the Bridge, there are two modes after pressing messages. One is portrait where the note being viewed shows in full screen after going to it from the inbox list. The other is in landscape where the inbox list is on the left and notes on the right. I want to zoom to a full screen landscape view of the note. I know that the device is capable of displaying a note this was as this is what you see when you touch the icon in the upper left corner to go directly to a new note or an urgent one, but I can't figure out how to get there from the normal note display.

There are two full screen modes in FCP X when running in MacOS X Lion.
Fullscreen playback:
     Enter using the double arrow on the viewer or with command-shift-F.
     Exit with the Escape key.
Fullscreen editing:
     Enter using the double arrow on the top right of FCP X's windows or control-shift-F.
     Exit using escape or control-shift-F.
This is how it works for me.

How do I switch Windows 8 to desktop mode from tablet mode?

I think my laptop is in tablet mode, because after only one minute of inactivity it goes to the lock screen and asks me for a password. This is troublesome when I am trying to read something, for example.
Thanks.

Hi,
Go to your Screen Saver Settings, select how many idle minutes to Wait before going to straight to the log on screen without a screen saver displaying first.
Meanwhile, go to Control Panel\All Control Panel Items\Power Options, click "Change plan settings" link of your current selected plan, click "Change settings that are currently unavailable", set "turn off the display" as "never".
In addition, as NextXPert's view, Did you configure mail to sync with an Exchange environment?
Please refer to this thread:
http://social.technet.microsoft.com/Forums/windows/en-US/ace4085a-b0ba-4a98-898d-cd92d9e88e13/windows-8-cannot-change-screensaver-timeout?forum=w8itprogeneral
Karen Hu
TechNet Community Support

How do I switch my camera to VTR mode?

I have looked everywhere for VTR! I have a Canon ZR500.

Download the manual here: http://www.nodevice.com/user_manual/canon/camcorders2/zr500.html
Go to page 10. Look at the illustration "Right Side view". The round button marked with the number 6 is used to switch between Camera, Off and Play (VTR) modes.

How do I reset AE to be n mode onlty

I had some older machines hooked up top my AE. The older machines are now gone and I only have n compatible devices. How do I switch the AE to n mode only and will this make my connections faster?
Thanks
Noel

Welcome to the discussions, Noelsy!
The older machines are now gone and I only have n compatible devices.
In that case, they are connecting at maximum speeds. While you could change the Radio Mode on the AirPort Extreme to "n" only broadcast frequencies, there is really no need to do this unless you want to.
o Open AirPort Utility - click Manual Setup
o Click the Wireless tab below the row of icons
o Hold down the option key on your Mac while you click on the Radio Mode selection box to display all available choices
o Choose the following setting: 802.11n only 5 GHz -- 802.11n only 2.4 GHz
o Click Update to save settings and the AirPort Extreme will restart in 25-30 seconds

How do i switch library from one apple id to another

How do I switch my Ipod library from on apple ID to another Apple ID number. I have two email address and my main Ipod library is under one email apple id #.

Hi if you have songs you bought on itunes it should go through but not all the time so I know a trick because I had songs that got deleted by mistake I bought from itunes but this lets you get all music content out
here's how it goe's
1st pulg your ipod in then go tostart menu click on my computer or just computer depending on what your model calls it
2nd Once in my comp click on your ipod drive go to tools or view under options click on file or floder then look for
the show all hidden files section make sure because this is very important click on the option ok it or apply it
3rd then a new file or floder will apear click on it then look for the music section the folders will have codes like a letter and number click on one of them because this is a block of some of the music then you will see the songs you will have alot of these files so highlight them all it & drag them into the my music floder by you have to do it folder by folder to highlight all the songs they are broken off into differnt sections!! so each coded folder with music must be opened & then the music highlighted then draged into my music shouln;t take too long it took me like an hour total
Btw Itunes should have my music set as it's defualt so make sure then after that you can add music same way highlight all the songs in each coded section then click open hope I helped
Nick The Nerd

Switch Section in a dashboard based on the selection of Prompts (OBIEE 10G)

Hi All,
I have a requirement : I have to switch Section in a dashboard based on the selection of Prompts (OBIEE 10G).
Lets say I have 1 report in section1 and another report in section2 of a dashboard. I have a dashboard prompt,now say when the user does not select any value in a prompt I have to show section1 and when he selects values in a prompt then I have to show section2 of the dashboard. I tries this using Guided Navigation Link and presentation variable but there is a limitation that I have to select only one value in the prompt as i have created presentation variable.
But the client wants the prompt as Multi Select. in this case I can 't use the presentation variable.
How can I fulfil this requirement.Please let me know.
Thanks,
Krishna

How you create your multiselect prompt? Is it based on a column? Using multiselect prompt you'll get an issue in this case. The prompt behavior with choosing all values and choosing nothing is equivalent. But your requirement has different behavior lines.

I have used lightroom for ~2 years and have lightroom 5.5 installed on a PC. Yesterday evening I uploaded a new set of photos which I cataloged and rated as usual. After that when I switched to the develop module trouble began. First thing was when using

I have used lightroom for ~2 years and have lightroom 5.5 installed on a PC. Yesterday evening I uploaded a new set of photos which I cataloged and rated as usual. After that when I switched to the develop module trouble began. First thing was when using the crop tool the picture would disappear and only reappear once I closed the tool. Then exposure and White balance changes would change the histogram but not the appearance of the photo. Finally clipping was also not appearing on the picture. I first reuploaded the photos. No effect. Then I reinstalled lightroom. No effect. Help please!

Try deleting your preferences file
How do I delete the Lightroom Preferences file? - The Lightroom Queen Help Desk & Members Area - Powered by Kayako Resol…

HT204053 How can I switch my iTunes account from US store to Nigeria store?

How can I switch my iTunes account from US store to Nigeria store?

If you are asking because you are getting an 'account not in this country' error message then on an iPad, iPhone or iPod Touch try going to the bottom of the Featured tab in the App Store app on the device and tap on your account id, tap on 'View Apple ID' on the popup and log into your account, and then select the Country/Region section on that screen and select Nigeria.
If you need to update your address on your account from the US to Nigeria then on your computer's iTunes you should be able to do so by signing into your account via the Store > View Account menu option and updating your address, or on an iOS device you can do it by tapping on your id at the bottom of the Featured tab in the App Store similar to above.

HT1655 my imtunes loaded a set of 4 genius playlists to my i shuffle..it keeps replaying the same list ...how do I switch from list to list ?

My itunes loaded my songs to my new shuffle in 4 sets of playlists....now it keeps replaying same list...how do I switch to other lists to listen to rest of tunes..?

You must use VoiceOver. See the Changing Playlists section of this Apple support document for more information.
iPod shuffle (4th generation): Enabling and using VoiceOver
B-rock

HT4990 How can I switch to apple Canada app

How can I switch to apple Canada app any time I like to to get app I god message than I have t switch to canadin App Store

Try going to the bottom of the Featured tab in the App Store app on your iPad and tap on your account id, tap on 'View Apple ID' on the popup and log into your account, and then select the Country/Region section and select Canada

How do I switch from the American to the British store?

How do I switch from the American to the British store?

You are here in the UK with a UK billing address on your account ? If you are, and the stores think think that you are in the US, then try going to the bottom of the Featured tab in the App Store app on your phone and tap on your account id, then tap on 'View Apple ID' on the popup and log into your account, and then select the Country/Region section and select the UK.

How does your shop administer your development team's environments?

Please forgive if this is the wrong forum for this question. I think this forum makes the most sense for it, so here goes. I posted this in a MOS community but did not get hardly any feedback.
I am curious how others out there are handling there developer installations. We have Oracle Forms and Reports version 11.1.1.6 64bit running on Solaris SPARC with WLS 10.3.6 for for production and test. We have around 15 developers who are currently running WLS 10.3.4 and Forms and Reports 11.1.1.4 on Windows 7 32 bit. At the time we made our conversion from 6i to 11g Oracle Forms and Reports were not supported on a 64 bit Windows platform. That has since changed.
My issue is maintaining all of these separate installations for the developers. Because they are 32 bit there is the 4GB of memory constraint on the operating system. I have lots of trouble with these instances in large part due to the tight memory configuration. Just running WLS with two managed servers, one for forms and one for reports uses 75% of the available RAM.
What I would like to do is have some sort of shared development environment so that I don't have maintain so many instances of WLS and Forms and Reports. I am curious how other customers are handling their developer installations. Is there a better way than loading a full blown WLS and Forms and reports server on each developers workstation? I would love to load a 64 bit Windows 2008 server with WLS and Forms and Reports, and give it Terminal server licenses to allow them to share one instance, but I don't see where Forms Builder and Reports Builder are supported on 64bit Windows server platforms, at least not 11gR1.
My last resort is to add memory to their workstations and reload as 64 bit, but that does nothing to address my problem of having to maintain so many instances of WLS and Forms and Reports. I am prepared to go this route if I can not find a better solution. I also understand there is a developer edition now available where the forms and reports run inside the admin server reducing the footprint, but I am not sure which version this is included in.
So again I ask how are you folks handling you Forms and Reports installations for your developers?
Edited by: user11049532 on Jan 11, 2013 10:23 AM

Right, I've had a look this morning and here are a few gaps in my explanation:
Each developer will need their own environment set up on the development server.
The first part of this is to have their own directory on the server which they may want to map to a drive on their PC. Let's call this directory DEV_HOME.
The second part is to set up their environment on the Forms server part of weblogic, you can do this either through the Enterprise Manager interface or manually via the filesystem. If you're doing it via the file system the files you need to copy/alter will be in a directory similar to the one below:
d:\Oracle\Middleware\user_projects\domains\ClassicDomain\config\fmwconfig\servers\WLS_FORMS\applications\formsapp_11.1.2\config
First of all make a copy of the default.env file for each developer. You will need to change the FORMS_PATH variable in this file to include the developers DEV_HOME server directory. In our setup my environment file is called adrian.env.
Next you will need to change the forms web configuration to include a section for each developer. If you're doing it manually the file is called formsweb.cfg and will be in the directory listed above. All you need to put in the section is a variable 'envFile' pointing to the environment file you've just created. The section for me in our formsweb.cfg is listed below:
*[adrian]*
*# System parameter: file setting environment variables for the Forms runtime processes*
envFile=adrian.env
You may need to restart the forms server to have these changes take effect if you've done the changes manually.
The developers should store all their forms files that they are working on in their DEV_HOME directory on the development server. When they open a file in Forms Builder they should open it using the full network path (not via a mapped drive) e.g. \\DOMAIN\Server\d$\users\username\fmb\myform.fmb.
In Forms Builder the Application Server URL needs to be set, it can be accessed by:
Select Edit from the menu -> Preferences... -> Runtime -> Application Server URL
This setting needs to be changed to:
http://servername:portnumber/forms/frmservlet?config=adrian
Now when a developer clicks the Run form icon the form should run on the development server, with no need to have weblogic running on their own pc.

How to Rapidly Switch 'Sections' in Develop Solo Mode

Similar Messages

Maybe you are looking for