How to re-initialize a Unity Connection 8.5 DataBase for Lab testing

I have built an Active/Active Unity Connection 8.5 Cluster on UCS for lab testing and I am wondering how to re-initialize the database (Clean out the database like a new install) without having to reinstall the application. I forgot to take a DRS of the newly installed server to revert back to.
I have tried using Bulk Administration but subscribers and Callhandlers with Dependencies will not be touched by the Bulk Administration job. I need a quick way of getting the database back to fresh install status.

Hi,
Unlike Unity, there isn't a way to do this with UC without re-installing the entire application.
Brad

Similar Messages

How to configure AutoAtendant on Unity Connection

Hi,
I have a Cisco CallManager 8.6 and a Cisco Unity Connection 8.6 on VMWare.I purchased the bundle (solution) Cisco BE 6000.
I did the integration of the Unity Connection with the CUCM via SIP (I also created a trunk SIP on CUCM to access CUC).
I would like to use the Unity Connection as AutoAttendant.
To do this I saw in the forum that I have to configure:
- a CTI Route Point with a DN on CallManager.
- To do a "forward all" on CTI Route Point to the VoiceMail
- On CUC to Add a new System Call Handler and to assign the same DN than the CTI Route Point
- to go to the Call Handler and to change the default message via My Personal Recording.
it would be well?
would I also have to create a end user on CUCM with Associated Device the CTI Route Point to see this DN as User with Voice Mail on CUC?
I would like that the AutoAttendat after Greeting to transfer the call to the DN which is the Pilot of Attendant Console. This action I don´t know how to do it.
I'm confused because I see on Call Handler a field called "After Greeting" with some settings (Call Action, Call Handler, Directory Handler, Conversation, User with Mailbox) but I don´t see any parameter where I can configure the DN to transfer the call.
I also the field called "Call Transfer Rules" but I am confused.
Another thing, could I to configure the CUC for the Auto Attendant works in one way some days (office hours) and out office hours and holidays works in other way?
It is possible to do on CUC to upload "Recorded Prompts" as UCCX Express to configure them as Greetings or I have to record My Personal Recordings with a Phone?
Can you help me, please?
Thank you very much

Hi,
I continued doing tests but I don´t get that the call is transfered to the Attendant Console Pilot after Greeting.
Sometimes I think that the Unity doesn´t know how to get to Atendant Console Pilot Point.
I read in the forums that I need to configure a call system transfer, by default transfer numbers that are recognized are only elements from CUC and to dial any other number which is not configured on CUC you need a call system transfer.
I also that I need a caller input or a routing rule to reach a call system transfer.
But in my case I want that after greeting the external call (DID) goes to Attendant Console Pilot without dialing any key, ie the outside caller call and he gets the greeting and after is redirected to the Attendant Console Pilot. Therefore I think I don´t need to configure any "caller input".
I did some tests with routing rule but I had not any luck. Could be due to the Unity Connection doesn´t know to get the Attendant Console Pilot.
Remember that I did the integration between CUCM and CUC via trunk SIP. How the Unity Connection knows that to get the Attendant Console Pilot it has to go to the CallManager (via SIP)?
I am confused.
Can you tell me how can I do this?
Regards

How to delete users in unity connection

hello all,
I have a unity connection cluster on version 7.1.3 and a cucm cluster on version 7.1.3
when i try to delete a user in unity connection I get the following error
This user is integrated with a Cisco Unified Communications Manager end user. Some fields may be disabled.
I deleted the user in cucm, however the user is still in Unity connection and i can't delete it,
what's the best way to delete a user ?
thank you
Cris

When the CUCM End User is deleted, the corresponding CUC user should automatically be deleted as well. Sometimes this isn't the case and the CUC user still exists and cannot be deleted due to other database hooks.
First you will need to find the ObjectId for the user that you want to remove from Connection:
run cuc dbquery unitydirdb SELECT ObjectId from vw_User WHERE Alias = 'alias of the user you want to delete'
Now you will want to delete that user as such (this will fail if there are database hooks still on the orphaned user):
run cuc dbquery unitydirdb EXECUTE PROCEDURE csp_UserDelete (pObjectId = 'objectid from above')

How is the best way to connect to the Database ?

I just have a question regarding to the connection to the Oracle DB.
Every time I create a new JSP I am writing java code such as:
Class.forName("oracle.jdbc.driver.OracleDriver").newInstance();
conn = DriverManager.getConnection("jdbc:oracle:thin:@host:1521:DB",
"user",
"pwd");
Is there a way I can reuse the connection that we create on JDeveloper on the tab Connections, under the Database node ?
Because I would like to centralized more the way how I connect to DB.
Thanks!
Giovani

That is a nice solution, but only works if you use embedded OC4J, if not you must define datasources, maybe in standalone OC4J, OAS, JBoss, etc
this is because the embedded OC4J automatically create datasources if it sees database connectiones created through Connections Tab

How to resolve "getPooledConn: No more connections in the pool for Host"

I am using the wl9.1 proxy in a SunOne WebServer 6.1 (solaris), and I regularly get this error:
getPooledConn: No more connections in the pool for Host
I found several postings with this error, but no reactions on how to solve this.
in the proxy log, I see this info:
================New Request: [wls-app/page.do] =================
Tue Nov 13 13:05:30 2007 <18781194955530286> CookieName is deprecated and replaced by WLCookieName
Tue Nov 13 13:05:30 2007 <18781194955530286> Uri as read from rq (request) data structure /wls-app/page.do
Tue Nov 13 13:05:30 2007 <18781194955530286> Uri after pathTrim /wls-app/page.do
Tue Nov 13 13:05:30 2007 <18781194955530286> Uri resolved to /wls-app/page.do?page=messages
Tue Nov 13 13:05:30 2007 <18781194955530286> resolveRequest return code is [0]
Tue Nov 13 13:05:30 2007 <18781194955530286> URI=[wls-app/page.do?page=messages]
Tue Nov 13 13:05:30 2007 <18781194955530286> INFO: SSL is not configured
Tue Nov 13 13:05:30 2007 <18781194955530286> Found cookie from cookie header: wlsappCookie=H5TccKpNWGqfnvv2wG1znjmJkqNhMyhct0h93HDgfGnc7phpkdxW!-1488879380!864729474
Tue Nov 13 13:05:30 2007 <18781194955530286> Parsing cookie wlsappCookie=H5TccKpNWGqfnvv2wG1znjmJkqNhMyhct0h93HDgfGnc7phpkdxW!-1488879380!864729474
Tue Nov 13 13:05:30 2007 <18781194955530286> getpreferredServersFromCookie: [-1488879380!864729474]
Tue Nov 13 13:05:30 2007 <18781194955530286> primaryJVMID: [-1488879380]
secondaryJVMID: [864729474]
Tue Nov 13 13:05:30 2007 <18781194955530286> No of JVMIDs found in cookie: 2
Tue Nov 13 13:05:30 2007 <18781194955530286> Trying to locate Primary or Secondary using SrvrInfo with JVMID: -1488879380
Tue Nov 13 13:05:30 2007 <18781194955530286> getPreferredFromCookie: Found Primary 10.0.0.102:8514:0
Tue Nov 13 13:05:30 2007 <18781194955530286> Trying to locate Primary or Secondary using SrvrInfo with JVMID: 864729474
Tue Nov 13 13:05:30 2007 <18781194955530286> getPreferredFromCookie: Found Secondary 10.0.0.101:8514:0
Tue Nov 13 13:05:30 2007 <18781194955530286> getPreferredFromCookie: Found 2 servers
Tue Nov 13 13:05:30 2007 <18781194955530286> attempt #0 out of a max of 5
Tue Nov 13 13:05:30 2007 <18781194955530286> trying connect to PRIMARY '10.0.0.102'/8514/0
Tue Nov 13 13:05:30 2007 <18781194955530286> getPooledConn: No more connections in the pool for Host[10.0.0.102] Port[8514] SecurePort[0]
Tue Nov 13 13:05:30 2007 <18781194955530286> INFO: New NON-SSL URL
Tue Nov 13 13:05:30 2007 <18781194955530286> Connect returns -1, and error no set to 150, msg 'Operation now in progress'
Tue Nov 13 13:05:30 2007 <18781194955530286> EINPROGRESS in connect() - selecting
Tue Nov 13 13:05:30 2007 <18781194955530286> Local Port of the socket is 64242
Tue Nov 13 13:05:30 2007 <18781194955530286> Remote Host 10.0.0.102 Remote Port 8514
Tue Nov 13 13:05:30 2007 <18781194955530286> created a new connection to preferred server '10.0.0.102/8514' for '/wls-app/page.do?page=messages', Local port: 64242
Tue Nov 13 13:05:30 2007 <18781194955530286> WLS info : 10.0.0.102:8514 recycled? 0
Tue Nov 13 13:05:30 2007 <18781194955530286> Adding header for WLS 'WL-Proxy-Client-Cert: ###
---removed client cert info---
Tue Nov 13 13:10:30 2007 <18781194955530286> *******Exception type [READ_TIMEOUT] (no read after 300 seconds) raised at line 205 of Reader.cpp
Tue Nov 13 13:10:30 2007 <18781194955530286> caught exception in readStatus: READ_TIMEOUT [os error=0, line 205 of Reader.cpp]: no read after 300 seconds at line 822
Tue Nov 13 13:10:30 2007 <18781194955530286> PROTOCOL_ERROR: Backend Server not responding - isRecycled:0
Tue Nov 13 13:10:30 2007 <18781194955530286> *******Exception type [PROTOCOL_ERROR] (Backend Server not responding) raised at line 842 of URL.cpp
Tue Nov 13 13:10:30 2007 <18781194955530286> got PROTOCOL_ERROR exception in sendRequest phase at line 1364; Msg: PROTOCOL_ERROR [line 842 of URL.cpp]: Backend Server not responding
Tue Nov 13 13:10:30 2007 <18781194955530286> request [wls-app/page.do?page=messages] did NOT process successfully..................
Does anyone know how to resolve this issue ?
Thanks,
Cappaert Luc

We are seeing a similar connection pool error captured in the WL proxy log doing load testing. Is there an answer to this question of how to increase this pool size?
Fri Jan 16 14:59:02 2009 <535212321359422334> Trying a pooled connection for '191.228.175.226/7003/0'
Fri Jan 16 14:59:02 2009 <535212321359422334> getPooledConn: No more connections in the pool for Host[191.228.175.226] Port[7003] SecurePort[0]
Fri Jan 16 14:59:02 2009 <535212321359422334> general list: trying connect to '191.228.175.226'/7003/0 at line 1319 for '/SIT-cccpol/PTGadget/SetCookies.jsp'
Fri Jan 16 14:59:02 2009 <535212321359422334> INFO: New NON-SSL URL
Fri Jan 16 14:59:02 2009 <535212321359422334> Connect returns -1, and error no set to 10035, msg 'Unknown error'
Fri Jan 16 14:59:02 2009 <535212321359422334> EINPROGRESS in connect() - selecting
Fri Jan 16 14:59:02 2009 <535212321359422334> Local Port of the socket is 2097
Fri Jan 16 14:59:02 2009 <535212321359422334> Remote Host 191.228.175.226 Remote Port 7003

How can I speed up the connection to the database?

I am running a JSP application with regular JavaBeans not EJB and connecting to the database through these beans. The connection is set to stay in memory as long as the bean is in session. However when I am running more than 7 sql statements seperatly the execution of the page slows down.
I have tried using connection pooling but doesn't help much.
I am not using the JDBC setting in JRUN, I am connecting through the jdbc.odbc drivers provided by the JDK. Basically coded the connection and the connection pool.
Is there something else that can be done to speed up the execution of the page?
Thanks in advance

Thank you all for your input I was trying to work this project to learn JSP so I am not looking at purchasing any drivers right now. That is the reason why I stuck to the JDBC-ODBC Bridge. Are there any other drivers available for MS SQL Servers that are free.
Jschell,
That suggests you are taxing the system. It could be >connections. It could also be network, cpu, bus, etc. It >could also be memory, if your app starts swapping to >the hard drive it will get substantially slower.How can i figure out which of the above (i.e. memory, cpu, connections, network) are causing the problem.
(Presumably you explicitly close your >ResultSets/Statements/Connections when you are >done with them.)You are right about that yes I am closing them at the end of the session, which I think should be after all of the SQL's get executed but I could be wrong it might be openeing a new connection for each SQL which inturn might be the reason for this whole problem. I will take a look into that.
Thank you all once again.

Unity Connection with a 2951 for analog to SIP?

Has anyone tested this out yet?
Avaya PBX with analog ports (from existing voicemails system server) to a 29XX router using FXO cards.
SIP to Unity Connection.
The diversion headers would come across correctly because these are the same analogs the existing voicemail server was using. The 29XX router would then have SIP dial peers that go to Unity Connection.
Im not sure if this is a supported configuration or if it will even work. In a pinch right now because PIMG lead times are waaaaay long.
Thanks!

Sounds like you are trying to connect in the wrong direction. If you are using a URL in remote connection of the pot object it would be a bi-directional connection. Did you try 'edit connections' from the GE object itself? Select the M register for the writable member and the pot object as the new logical connection. This method has two advantages - the remote PLC cannot change the current lookout setting for the register (which would certainly occur with a remote power fail). Also, you can use far more lookout object to control the PLC registers - objects like Expressions and LatchGates that have no remote URL position sources or writable data members.

How to use the mirrored and log shipped secondary database for update or insert operations

Hi,
I am doing a DR Test where I need to test the mirrored and log shipped secondary database but without stopping the mirroring or log shipping procedures. Is there a way to get the data out of mirrored and log shipped database to another database for update
or insert operations?
Database snapshot can be used only for mirrored database but updates cannot be done. Also the secondary database of log shipping cannot used for database snapshot. Any ideas of how this can be implemented?
Thanks,
Preetha

Hmm in this case I think you need Merge Replication otherwise it breaks down the purpose of DR...again in that case..
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

How to debug a Diagnostic Data Adapter (custom data collector) for Microsoft Test Manager

Hello,
I have created a custom Diagnostic Data Adapter aka. custom data collector for Microsoft Test Manager (MTM) and installed it, all according to the guidelines under Creating
a Diagnostic Data Adapter to Collect Custom Data or Affect a Test Machine.
I would like to debug my data collector. On which machine should I perform the debugging and to which process should I attach from Visual Studio? Are there any restrictions regarding the user who is running the debug session?
How can I do that?
Thank you ,
Ana

It seems that I found the solution, but I would like someone still to verify if it is the right one.
Steps:
Turn on "Microsoft Symbol Server" under In Tools-->Options-->Debugging
Restart manually "Visual Studio Lab Agent Service" on the machine where the collector is installed (this actionautomatically restarts the Visual Studio Test Agent ("C:\Program Files (x86)\Microsoft Visual Studio 11.0\Common7\IDE\QTAgentService.exe"))
Load code for your collector in Visual Studio
Attach the Visual Studio debugger to the processes QTAgentService.exe and QTDCAgent32.exe
Start test in MTM on client machine using test setting which trigger the data collector (diagnostic data adapter)
and finally hit a brake point in your code...
Thank you,
Ana

How can I use the Unity Connection 10.5 Greetings Administrator with e.164 CallHandler extensions

We recently upgraded to CUCM 10.5 and CUC 10.5 using an e.164 dial plan throughout. One snafu that has surfaced is how do people access a CallHandler via the Greetings Administrator TUI if the CallHandler extension begins with a '+' character? Pressing and holding * does not seem to work. Any ideas?

We recently upgraded to CUCM 10.5 and CUC 10.5 using an e.164 dial plan throughout. One snafu that has surfaced is how do people access a CallHandler via the Greetings Administrator TUI if the CallHandler extension begins with a '+' character? Pressing and holding * does not seem to work. Any ideas?

How do I get past the "connection untrusted" pop-up for Facebook?

For Facebook, as well as FB apps like Words with Friends and Trivia Crack, I keep getting the "Connection is Untrusted" pop-up. I have to keep going out and coming back in, many times as often as a dozen tries, before the game app or the FB home page will load. How can the sites be "untrusted" when I'm in there 20 to 30 times a day? I want to override the "untrusted" decision.

The preguntados<i></i>.com site works fine for me.
Open this chrome URI by pasting or typing this URI in the location/address bar to open the "Add Security Exception" window and check the certificate:
* chrome://pippki/content/exceptionDialog.xul
In the location field type/paste the URL of the website
* retrieve the certificate via the "Get certificate" button
* inspect the certificate via the "View..." button
Subject: CN = *.preguntados.com OU = Domain Control Validated
Issuer: Go Daddy Secure Certification Authority
Try to rename the cert8.db file (cert8.db.old) and delete the cert_override.txt file in the Firefox profile folder to remove intermediate certificates and exceptions that Firefox has stored.
If that has helped to solve the problem then you can remove the renamed cert8.db.old file.
Otherwise you can rename (or copy) the cert8.db.old file to cert8.db to restore the previously stored intermediate certificates.
Firefox will automatically store intermediate certificates when you visit websites that send such a certificate.
If that didn't help then remove or rename secmod.db (secmod.db.old) as well.
You can use this button to go to the currently used Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
*http://kb.mozillazine.org/Profile_folder_-_Firefox
You can remove all data stored in Firefox from a specific domain via "Forget About This Site" in the right-click context menu of an history entry ("History > Show All History" or "View > Sidebar > History") or via the about:permissions page.
Using "Forget About This Site" will remove all data stored in Firefox from that domain like bookmarks, cookies, passwords, cache, history, and exceptions, so be cautious and if you have a password or other data from that domain that you do not want to lose then make sure to backup this data or make a note.
You can't recover from this 'forget' unless you have a backup of the involved files.
It doesn't have any lasting effect, so if you revisit such a 'forgotten' website then data from that website will be saved once again.

How to create a DSN-less connection to SQL Server for linked tables in Access

hey
i cant understand how i use that Function
if that information what you need
stLocalTableName: dbo_user_name
stRemoteTableName: user_name
stServer :sedo2015.mssql.somee.com
stDatabase :sedo2015
stUsername :sedo_menf_SQLLogin_1
stPassword :123456789
how will be that Function??
please write that Function to me
'//Name : AttachDSNLessTable
'//Purpose : Create a linked table to SQL Server without using a DSN
'//Parameters
'// stLocalTableName: Name of the table that you are creating in the current database
'// stRemoteTableName: Name of the table that you are linking to on the SQL Server database
'// stServer: Name of the SQL Server that you are linking to
'// stDatabase: Name of the SQL Server database that you are linking to
'// stUsername: Name of the SQL Server user who can connect to SQL Server, leave blank to use a Trusted Connection
'// stPassword: SQL Server user password
Function AttachDSNLessTable(stLocalTableName As String, stRemoteTableName As String, stServer As String, stDatabase As String, Optional stUsername As String, Optional stPassword As String)
On Error GoTo AttachDSNLessTable_Err
Dim td As TableDef
Dim stConnect As String
For Each td In CurrentDb.TableDefs
If td.Name = stLocalTableName Then
CurrentDb.TableDefs.Delete stLocalTableName
End If
Next
If Len(stUsername) = 0 Then
'//Use trusted authentication if stUsername is not supplied.
stConnect = "ODBC;DRIVER=SQL Server;SERVER=" & stServer & ";DATABASE=" & stDatabase & ";Trusted_Connection=Yes"
Else
'//WARNING: This will save the username and the password with the linked table information.
stConnect = "ODBC;DRIVER=SQL Server;SERVER=" & stServer & ";DATABASE=" & stDatabase & ";UID=" & stUsername & ";PWD=" & stPassword
End If
Set td = CurrentDb.CreateTableDef(stLocalTableName, dbAttachSavePWD, stRemoteTableName, stConnect)
CurrentDb.TableDefs.Append td
AttachDSNLessTable = True
Exit Function
AttachDSNLessTable_Err:
AttachDSNLessTable = False
MsgBox "AttachDSNLessTable encountered an unexpected error: " & Err.Description
End Function

thanks more thanks for you
look i add that code in form
it worked but i cant add recored why ??
Private Sub Form_Open(Cancel As Integer)
Call AttachDSNLessTable("dbo_user_name", "user_name", "sedo2015.mssql.somee.com", "sedo2015", "sedo_menf_SQLLogin_1", "123456789")
End Sub

How do I initialize the ItemDetails screen when first presented for MDM WD

Hello everyone!
Iu2019m new to the world of netweaver ce and webdynpro for MDM and need a little help with what Iu2019m sure is a basic code problem for most of you. Please help if you can! I am a developer for MDM 7.1 sp06. We are now experimenting with Enterprise Portal using NetWeaver CE 7.2. I have create and deployed an application using NetWeaver Design Studio 7.2. I have also created some screens in the WD Configuration Manager for MDM.
The 2 interface views I have configured are u201CSEARCHu201D and u201CITEMDETAILSu201D. u201CITEMDETAILSu201D was limited to ADD/CREATE new items in MDM using the WD Configuration Manager options.
When I created the WD application in NWDS I also created a link with buttons between the 2 screens/views. When I then deploy my application and I press the button to go from my u201CSEARCHu201D screen/view to the u201CITEMDETAILSu201D ADD screen/view, All I see is a u201CCREATEu201D button and no other fields.
I expected to see every field without values in them just as I do when I u201CPREVIEWu201D the screen in the WD Configuration Manager . If I continue and press the u201CCREATEu201D button on the the u201CITEMDETAILSu201D view, The screen the then presented as I expected with all fields showing but without any values populated in them. I donu2019t want the user to have to press the create button the first time they are presented with this screen.
Can anyone tell me or give me a sample of code that will initialize the itemDetails view just as it is seen when previewed in the WD Configuration Manager?
Thank you
Steve

Thanks for the reply but I dont have any problem calling the ItemDetailsInterface. My problem is when I call the ItemDetailsInterface the screen that is presented has no data other than the buttons. I would like the ItemDetailsinterface to display exactly as it does when I preview the screen in WD configuration manager.
What I expect to see is... a screen showing all the buttons plus all the ItemDetails Fields but with the fields initilized as null. this would then allow my user to input the fields needed to create a new record. As it works now... when the user is sent to the ItemDetails view... all they see is the "Cancel" and "Create" button. They have to press the "Create" button 1 time inorder to present the screen a second time but this time witlh all fields presented.
I believe I have to set the "LeadSelection" or the "internalID" to -1 the first time thru the ItemDetails "DoInit" section. So far, no luck.

How to find the user - role assignments in the database for EP6 SP9?

L.S.,
We have a quite specific requirement: to see which users have access to our portal environment (EP6 SP9). It does not immediately matter (though would probably still be nice to know if possible) which roles users have exactly.
I've been looking in the database to find user-to-role assignments there, but I'm unable to find any. The closest I got is the PID filed in the UME_STRINGS table, but users remain listed there even when all their portal roles are revoked afterwards. Any ideas?
Kind Regards,
Steven Dijkman

hi Steven,
     Sorry but you will have to write some code. the following lines of code will work for you.
IRoleSearchFilter rolefilter = UMFactory.getRoleFactory().getRoleSearchFilter();
          ISearchResult result = UMFactory.getRoleFactory().searchRoles(rolefilter);
          while (result.hasNext()) {
               String rolestr = (String) result.next();
               IRole r = UMFactory.getRoleFactory().getRole(rolestr);
               response.write(r.getDisplayName());
               response.write("<br>");
               Iterator users = r.getMembers(true);
               while (users.hasNext()){
                    String userstr = (String)users.next();
                    IUser user = UMFactory.getUserFactory().getUser(userstr);
                    response.write(user.getDisplayName());

How to delete multiple messages in the same mailbox all at once? Unity Connection

I just was assigned the task of administrating three Unity Connection servers that are networked. The Operator mailboxes on each system have been taking messages since 2010 and have over 5 thousand messages in them (nearly 3 mega bytes). I've corrected the set up so the mailboxes no longer are taking messages, but would like to delete all the new messages in order free up memory resources, and I don't want to undo all the Call Handler relationships in order to delete the mailboxes and then recreate them, etc. I used the PCA tool to clean up the Operator MBX on a standalone Unity Connection that had nearly 1800 messages, but it took nearly 30 minutes for the PCA tool to load and another 4.5 hours to delete one message at a time (major carpal tunnel afterwards!). For these mailboxes with 5-6K messages, the PCA tool was not loaded after 3 hours!   Is there a faster, more efficient tool for deleting all new messages in a single mailbox? (i.e., Message Hunter?)

Hi There,
+5 to heath for his good notes!
One nice way with Unity Connection is with the use of this excellent tool from the great suite of Unity Tools (use the ** reset" feature **).
Unity Connection Bulk User Delete
For resetting users you have the option of emptying the mailbox, resetting greetings, deleting voice names, resetting passwords, removing private lists and a number of other options you may choose.   For installations where the user base “changes over” frequently such as schools this may be a nicer option. This option is also allowed for CoRes installations since it does not involve the removal of user objects from the Connection database.
http://www.ciscounitytools.com/Applications/CxN/BulkUserDelete/BulkUserDelete.html
Cheers!
Rob
Please support CSC helps Kiva
https://supportforums.cisco.com/blog/12122171/cisco-support-community-helps-kiva

How to re-initialize a Unity Connection 8.5 DataBase for Lab testing

Similar Messages

Maybe you are looking for