How to read the contents of a text file and populate the data in a table ?
Hello All,
Can anyone advise on how to acheieve the above ? I am trying to read in a text file (CSV) and have the contents populated to the respective UI elements in a table. Any help is greatly appreciated.
from
Kwok Wei
Hi,
Let us consider you have list of names(Seperated by delimeter) in a text file and you want to display in a table.
1. Create Context Node "Names" and context attribute "Name"
2. Create Table and bind to the above context.
3.Write the following code in the "Init method.
try{
FileReader f =new FileReader("");
BufferedReader r=new BufferedReader(f);
String names=r.readLine();
Vector Names=new Vector();
// Use Tokenizer and store all the names i a vector//
for(int i=0;i<Names.size();i++){
IPrivate<<VieName>>.INameElement ele=wdContext.createNameElement();
ele.set<<Name>>( Names.get(i).toString());
wdContext.NodeName().addElement(ele);
Regards, Anilkumar
Message was edited by: Anilkumar Vippagunta
Similar Messages
-
Reading from a text file and displaying the contents with in a frame
Hi All,
I am trying to read some data from a text file and display it on a AWT Frame. The contents of the text file are as follows:
pcode1,pname1,price1,sname1,
pcode2,pname2,price2,sname1,
I am writing a method to read the contents from a text file and store them into a string by using FileInputStream and InputStreamReader.
Now I am dividing the string(which has the contents of the text file) into tokens using the StringTokenizer class. The method is as show below
void ReadTextFile()
FileInputStream fis=new FileInputStream(new File("nieman.txt"));
InputStreamReader isr=new InputStreamReader(fis);
char[] buf=new char[1024];
isr.read(buf,0,1024);
fstr=new String(buf);
String Tokenizer st=new StringTokenizer(fstr,",");
while(st.hasMoreTokens())
pcode1=st.nextToken();
pname1=st.nextToken();
price1=st.nextToken();
sname1=st.nextToken();
} //close of while loop
} //close of methodHere goes my problem: I am unable to display the values of pcode1,pname1,price1,sname1 when I am trying to access them from outside the ReadTextFile method as they are storing "null" values . I want to create a persistent string variable so that I can access the contents of the string variable from anywhere with in the java file. Please provide your comments for this problem as early as possible.
Thanks in advance.If pcode1,pname1,price1,sname1 are global variables, which I assume they are, then simply put the word static in front of them. That way, any class in your file can access those values by simply using this notation:
MyClassName.pcode1;
MyClassName.pname1;
MyClassName.price1;
MyClassName.sname1 -
How to read the content of a text file (by character)?
Guys,
Good day!
I'm back just need again your help. Is there anyone knows how to read the content of a text file not by line but by character.
Please help me. Thank you so much in advance.
Jojohttp://java.sun.com/javase/6/docs/api/index.html
package java.io
InputStream.read(): int
Reads the next byte of data from the input stream.
Implementation:
InputStreamReader
An InputStreamReader is a bridge from byte streams to character streams: It reads bytes and decodes them into characters using a specified charset. The charset that it uses may be specified by name or may be given explicitly, or the platform's default charset may be accepted. -
How to store the contents of a text file directly in to a clob field
Hi All,
Could anyone help me to store the contents of a text file (*.txt,*.xml etc)directly in to a clob field.
Thanks in advance
Jayaram.One way is to use sqlloader. Three files are used. A control file, an xml data file, and a file with the path of the xml data file. Here's the control file. It reads load.file, which is the file with the path of the xml data file. It names the path ext_path, and inserts the xml into field xml_field.
CONTENTS OF CONTROL FILE:
load DATA
INFILE 'load.file'
APPEND
INTO TABLE xml_table
( ext_path FILLER CHAR(13),
"XML_FIELD" LOBFILE(ext_fname) TERMINATED BY EOF
CONTENTS OF FILE LOAD.FILE:
/tmp/load.dat
The xml is in the file /tmp/load.dat.
null -
How can i read the text files and buffer the data in Vector?
hi. I have been running into this problem for days, but with no luck and losing right direction.
The problem is : I am trying to read a text file and buffer the data into a
Queue for each user.
the sample text file is as below:( 1st column is timestamp, 2nd is user_id, 3rd is packet_id, 4th is packet_seqno, 5th is packet_size)
0 1 1 1 512
1 2 1 2 512
2 3 1 3 512
3 4 1 4 512
4 5 1 5 512
5 6 1 6 512
6 7 1 7 512
7 8 1 8 512
8 9 1 9 512
9 10 1 10 512
10 1 2 11 512
11 2 2 12 512
12 3 2 13 512
13 4 2 14 512
14 5 2 15 512
15 6 2 16 512
16 7 2 17 512
17 8 2 18 512
18 9 2 19 512
19 10 2 20 512
20 1 3 21 512
21 2 3 22 512
22 3 3 23 512
23 4 3 24 512
24 5 3 25 512
25 6 3 26 512
26 7 3 27 512
27 8 3 28 512
28 9 3 29 512
29 10 3 30 512
30 1 4 31 512
31 2 4 32 512
32 3 4 33 512
33 4 4 34 512
34 5 4 35 512
35 6 4 36 512
36 7 4 37 512
37 8 4 38 512
38 9 4 39 512
39 10 4 40 512
40 1 5 41 512
41 2 5 42 512
42 3 5 43 512
43 4 5 44 512
44 5 5 45 512
45 6 5 46 512
46 7 5 47 512
47 8 5 48 512
48 9 5 49 512
49 10 5 50 512
50 1 6 51 512
51 2 6 52 512
52 3 6 53 512
53 4 6 54 512
54 5 6 55 512
55 6 6 56 512
56 7 6 57 512
57 8 6 58 512
58 9 6 59 512
59 10 6 60 512
60 1 7 61 512
61 2 7 62 512
62 3 7 63 512
63 4 7 64 512
64 5 7 65 512
65 6 7 66 512
66 7 7 67 512
67 8 7 68 512
68 9 7 69 512
69 10 7 70 512
70 1 8 71 512
71 2 8 72 512
What I wanna do is to read all the data above and buffer them in a queue for each user( there are only 10 users in total).
I already created a class called Class packet:
public class packet {
private int timestamp;
private int user_id;
private int packet_id;
private int packet_seqno;
private int packet_size;
/** Creates a new instance of packet */
public packet(int timestamp,int user_id, int packet_id,int packet_seqno, int packet_size)
this.timestamp = timestamp;
this.user_id=user_id;
this.packet_id=packet_id;
this.packet_seqno=packet_seqno;
this.packet_size=packet_size;
}then I wanna to create another Class called Class user which I can create a queue for each user (10 users in total) to store type packet information. the queue for each user will be in the order by timestamp.
any idea and sample code will be appreciated.Doesn't sound too hard to me. Your class User (the convention says to capitalize class names) will have an ArrayList or Vector in it to represent the queue, and a method to store a Packet object into the List. An array or ArrayList or Vector will hold the 10 user objects. You will find the right user object from packet.user_id and call the method.
Please try to write some code yourself. You won't learn anything from having someone else write it for you. Look at sample code using ArrayList and Vector, there's plenty out there. Post in the forum again if your code turns out not to behave. -
Want to display the contents of a text file in a jsp
hi
i am new to jsp, i want to display the contents of a text file in a jsp file ,whenever jsp file is loaded from browser.
-thanxi had come up with the code
<!-- form.jsp -->
<%@ page import="java.io.*, java.lang.*" %>
<%@ page language="java" %>
<html>
<head>
<title>Display</title>
</head>
<body>
<%
String sample[100];
String line;
%>
<%! int i=0; %>
<%!File f1 = new File("c:\\file.txt"); %>
<% try { %>
<%!FileReader fi = new FileReader(f1); %>
<% } catch(FileNotFoundException io) { } %>
<%!BufferedReader in = new BufferedReader(fi); %>
<%
while((line=in.readLine())!= null)
sample= line;
i++;
in.close();
%>
i will display sample here
</body>
</html>
but i am getting error
display_jsp.java:16: unreported exception java.io.FileNotFoundException;
must be caught or declared to be thrown
FileReader fi = new FileReader(f1);
^
plz help
-thanx -
Read a text file and populate table
My email addres is [email protected]
I am new to java. My project requires me to read a text file and pick some values from the text file and populate a table in MS Access. The main fields are from the TEXT. Some of the columns to be read are:
Transaction ref.
Amount
User ref.
Date
The text file is as follows:
Receiver =
FBNINGLAXXX LT : A
FST BANK OF NIGERIA PLC
LAGOS
LAGOS
NG
NIGERIA
Transaction ref. = SPLOUK01P0008888 Related ref. = 00077003
Amount = 16675750, NGN Value/Date =
Format & Validation
Version = 0205 Checked = Minimum
Netw. Appl. = FIN Passed = Minimum
Sender to Receiver Instructions
Banking Prior. = User ref. = SPLOUK01P0008888
Warning Status =
Possible Duplicate Emission
Appl/Serv = SWIFT Interface
RP & Ft = SIfrom_SWIFT
Date/Time = 01/04/03 18:53:19
Text =
:20:SPLOUK01P0008888
:28D:1/1
:30:030401
:21:00077003
:32B:NGN16675750,00
:50H:/4072010014877
SPDC FBN East Main A/C
:57D:WEMA BANK PLC
PLOT 22 TRANS-AMADI BRANCH P.H.
PORT HARCOURT.
RIVERS STATE.
:59:/0421002101818
PROJECT MASTERS NIGERIA LTD.
C101 ELIOGBOLO VILLAGE OFF
EAST-WEST ROAD RUMUOKORO PORT HAR
COURT
:70:PM PCE-TS 03 001030226
:71A:OUR
Block 5:
{MAC:9F664844}{CHK:60EF6513E579}
Message History =
*Original (Completed)See in this case as you are dealing with Files and database. you need read the File by using the I/O Streams. if you have to select some particular values you can go Random access file.Once you have retrived values. You can go for the second part that is make a jdbc connection to database, and use simple SQL statements to populate those values into the table.
How this will give you a better picture -
Any way to embed a text file and retain the link?
Hi everyone,
I am embedding the contents of a text file using "Insert > Choose...". This works wonderfully, but it appears to just insert the contents and gives me no way to update the text if the original text file changes. In Word, I can insert the text file and have it retain the link, then I have the ability to update the field (or all files in the document) with updated wording from my source files.
In case you're wondering, I'm exploring using Pages for authoring the user guides for my company's software. We include command usage statements in our documentation and we have a workflow that runs each command, capturing it's help output into a text file, then we include this in the user guide document. Obviously, having the ability to update the user guide document with updated usage syntax is a required piece of functionality. I would like to use Pages instead of Word, but I'm not sure it can do this.
Thanks in advance!
BrianNo, Pages can't do it. It doesn't keep a link to the original text document. You have to replace the text when you have made changes.
-
How can i open a DOC or TXT file and insert the data into table?
How can i open a DOC or TXT file and insert the data into table?
I have a doc file . the doc include some columns and some rows.(for example 'ID,Name,Date,...').
I'd like open DOC file and I'd like insert them into the table with same columns.
Thanks.Use the SQL*Loader utility or the UTL_FILE package.
-
To retrieve the PRT document (a PDF file) and insert the doc in PM order
Hello guys,
I have a challenging task in from printing as follows,
By using TC: IW3D we get print preview of PM Order Set (PM Print Program: YIPRJT01), currently the PRT document number prints in the PM Order. Now we have to insert the PRT documents (a PDF file) into the PM Order set rather than printing the PRT document number ( By using TC: IW33 by going OPERTIONAL TAB we will get the PRT document(a PDF file))
The requirement is to retrieve the PRT document (a PDF file) and insert the document in PM order set with out navigating separately by using the TC: IW33.
If you run the script in the print preview we can able to see PM the order set along with the PRT document (a PDF file).
Thanks & Regards
VishnuI'm also trying to print PRT document with shop papers and still not able to do so. I selected "P" for print on the control key and it should print but still didn't print.
If I understand it right, I think you are trying to do the same.
Have you resolved this issue ?
Thank you,
Sam -
I want to read the content of a text file dropped in a watched folder into a string variable
I have a workbench process with 2 variable.
inDoc (DataType=Document/input/required)
outStr (DataType = String/output)
The document being passed to the workflow is a text file with 4 lines of text in it. when the text file is dropped into the watched folder, it will be assigned to the inDoc parameter in the workflow.
My workflow needs to extract the 4 lines of text and write it into a string (outStr).
Id like to use the FileUtilsService.ReadString service but i can't since its input parameter is the file path. When i do, i get the following error...
Caused by: ALC-FUT-001-011: File rO0ABXNyABZjb20uYWRvYmUuaWRwLkRvY3VtZW50yAEFUxsO+CEDACNJAAtfY2FsbGJhY2tJZFoADV9kZXNlcmlhb Gl6ZWRJABBfZGlzcG9zYWxUaW1lb3V0WgAJX2Rpc3Bvc2VkWgAZX2lzRGlzcG9zYWxUaW1lb3V0RGVmYXVsdFoAE19 pc1RyYW5zYWN0aW9uQm91bmRKAAdfbGVuZ3RoSQAOX21heElubGluZVNpemVaAAhfb3duRmlsZVoAC19wYXNzaXZhd GVkWgALX3BlcnNpc3RlbnRJABFfc2VuZGVyQ2FsbGJhY2tJZFoAEV9zZW5kZXJQYXNzaXZhdGVkWgARX3NlbmRlclB lcnNpc3RlbnRJAA5fc2VuZGVyVmVyc2lvbkkABl9zdGF0ZUwAC19hdHRyaWJ1dGVzdAATTGphdmEvdXRpbC9IYXNoT WFwO0wACF9jYWNoZUlkdAAfTGNvbS9hZG9iZS9pZHAvRG9jdW1lbnRDYWNoZUlEO0wADF9jYWxsYmFja1JlZnQAIUx jb20vYWRvYmUvaWRwL0lEb2N1bWVudENhbGxiYWNrO0wADF9jb250ZW50VHlwZXQAEkxqYXZhL2xhbmcvU3RyaW5nO 0wAC19kYXRhQnVmZmVydAAeTGNvbS9hZG9iZS9zZXJ2aWNlL0RhdGFCdWZmZXI7TAAPX2V4cGlyYXRpb25UaW1ldAA QTGphdmEvbGFuZy9Mb25nO0wABV9maWxldAAOTGphdmEvaW8vRmlsZTtMABBfZ2xvYmFsQmFja2VuZElkdAAhTGNvb S9hZG9iZS9pZHAvRG9jdW1lbnRCYWNrZW5kSUQ7WwAHX2lubGluZXQAAltCTAAMX2lucHV0U3RyZWFtdAAVTGphdmE vaW8vSW5wdXRTdHJlYW07TAAPX2xvY2FsQmFja2VuZElkcQB+AAhMAAxfcHVsbFNlcnZhbnR0ACRMY29tL2Fkb2JlL 2lkcC9JRG9jdW1lbnRQdWxsU2VydmFudDtMABFfcmFuZG9tQWNjZXNzRmlsZXQAGkxqYXZhL2lvL1JhbmRvbUFjY2V zc0ZpbGU7TAAVX3NlbmRlckNhbGxiYWNrUmVmSU9ScQB+AARMABZfc2VuZGVyR2xvYmFsQmFja2VuZElkcQB+AAhMA A1fc2VuZGVySG9zdElkcQB+AARMABVfc2VuZGVyTG9jYWxCYWNrZW5kSWRxAH4ACEwAGl9zZW5kZXJQdWxsU2VydmF udEpuZGlOYW1lcQB+AARMAARfdXJsdAAOTGphdmEvbmV0L1VSTDt4cHcGAAAAAwAAcHd1AHMwOjA6MDowOjA6MDowO jEvMTI3LjAuMC4xLy8vLy8vLy8vZmU4MDowOjA6MDo3NDMyOmU0OWQ6NmUzMToxNTU0JTEwLzEwLjI0LjIzOS4xMjY vZmU4MDowOjA6MDowOjVlZmU6YTE4OmVmN2UlMTEvLy8vdXIAAltCrPMX+AYIVOACAAB4cAAAAcRJTU01MjU3XzAxL TIwMTFfMXwwMXx8YXx8fHxGZW1hbGV8MjAwMHw2fDh8Y3wyNTZ8MjU2fDkxMnwwMXx8fHx8fHx8Tnx8fHx8fHx8fHx 8fHx8fHx8fHxZfHx8fHx8fHx8fDAyfHx8fHx8TnwyMDEyfDJ8MTR8DQpJTU01MjU3XzAxLTIwMTFfMnx8fHx8fHx8f Hxhc2RmfDI1NnwyMDEyfDAyfDAxfDIwMTJ8MDN8MDJ8fHx8YXxhfDI1Mnx8fHxZfHx8fHx8fHx8fHx8fHx8DQpJTU0 1MjU3XzAxLTIwMTFfM3xOfHx8fHx8fHx8fDIwMDB8Nnx8fGFzZGZ8YXNkZnxhc2RmfDI1Nnx8fHx8fHx8fHx8fHx8f Hx8fHx8DQpJTU01MjU3XzAxLTIwMTFfNHxOfE58fE58TnxOfHxOfE58fE58TnxOfA0KSU1NNTI1N18wMS0yMDExXzV 8U2luZ2xlfDAxfHwyMDEyfDAyfDE4fDIwMTJ8MDN8MDN8MjM0fGFzZGZ8fGFzZGZhc3x8fHxFeGNoYW5nZS1Qcm8uO S40MDEuRnVsbC5XSU4uZW5fQ0EuRU5VLTEwLTIwMTF8DQoNCnBwdwYAAAAAAAB0AAp0ZXh0L3BsYWlucHNyABFqYXZ hLnV0aWwuSGFzaE1hcAUH2sHDFmDRAwACRgAKbG9hZEZhY3RvckkACXRocmVzaG9sZHhwP0AAAAAAAAx3CAAAABAAA AADdAAKd3NmaWxlbmFtZXQAJ0M6XFVzZXJzXENodWxseS5QYXJrXERlc2t0b3BcaGRzY2FuLnR4dHQACGJhc2VuYW1 ldAAKaGRzY2FuLnR4dHQABGZpbGVxAH4AFXh3NwAtYWRvYmUvaWRwL0RvY3VtZW50UHVsbFNlcnZhbnQvYWRvYmVqY l9MQ19ERVYx//////////94 does not exist.
at com.adobe.livecycle.fileutils.FileUtilsService.readDocument(FileUtilsService.java:363)
which is what i expected...
I've also tried with the Script.executeScript to call some java code but im not too strong in java and in all the examples i find, the file pointer requires a file path.
import java.io.*;
FileInputStream f = new FileInputStream(patExecContext.getProcessDataValue("/process_data/inDoc"));
OR
File f = new File(patExecContext.getProcessDataValue("/process_data/inDoc"));
OR
File f = patExecContext.getProcessDataValue("/process_data/inDoc");
Any clue how to resolve my problem?Try the following code snippet to read the String content from the file recieved through watched folder endpoint.
com.adobe.idp.Document inputDoc = patExecContext.getProcessDataDocumentValue("/process_data/inDoc");
java.io.InputStream inStream = inputDoc.getInputStream();
byte[] dataBuffer = new byte[inStream.available()];
inStream.read(dataBuffer);
String strData = new String(dataBuffer);
patExecContext.setProcessDataStringValue("/process_data/outStr",strData);
The code is not tested, hence if you find any mistakes, correct and test the functionality.
Nith -
How to read every line from a text file???
How can i read every line from my text file ("eka.txt")
now it only reads the first line and prints it out.
What is wrong with this?
import java.io.*;
import java.util.*;
class Testi{
public static void main(String []args)throws IOException {
BufferedReader stdin=new BufferedReader(new InputStreamReader(System.in));
File inputFile = new File ("eka.txt");
FileReader fis =new FileReader(inputFile);
BufferedReader bis = new BufferedReader(fis);
String test=bis.readLine();
String tmp= "";
while((bis.readLine().trim() != null)) {
int spacefound=0;
int l=test.indexOf(" ");
for(int i=0;i<test.length();i++){
char c=test.charAt(i);
if(c!=' ') tmp+=""+c;
if(c==' ' && (spacefound<1) && !(tmp.equals(""))){
tmp+=""+c;
spacefound++;
if(tmp.length()==l) {
System.out.println(tmp);
tmp="";
spacefound=0;
if(tmp.length()<l){
for(int i=0;i<=(l-tmp.length());i++)
tmp+=""+' ';
System.out.println(tmp);Try this code, Hope it servers your purpose.
import java.io.*;
import java.util.*;
class Testi {
public static void main(String []args)throws IOException {
BufferedReader stdin=new BufferedReader(new InputStreamReader(System.in));
File inputFile = new File ("Eka.txt");
FileReader fis =new FileReader(inputFile);
BufferedReader bis = new BufferedReader(fis);
String test=bis.readLine();
while(test != null) {
StringTokenizer st = new StringTokenizer(test," ");
while(st.hasMoreTokens())
System.out.println(st.nextToken());
test = bis.readLine();
}Sudha -
How to read some lines from a text file using java.
hi,
i m new to java and i want to read some lines from a text file based on some string occurrence in the file. This file to be read in steps.
we only want to read the file upto the first Occurrence of "TEXT" string.
How to do it ,,,
Kinldy give the code
Regards,
Sagar
this is the text file
dfgjdjj
sfjhjkd
ghjkdg
hjkdgh TEXT
ikeyt
ujt
jk
tyk TEXT
rukl
rHendawy wrote:
Since the word "TEXT" is formed of 4 letters, you would read the text file 4 bytes by four bytes. Wrong on two counts. First, the file may not be encoded 1 byte per character. It could be utf-16 in which case it would be two byte per character. Second, even if it were 1 byte per character, the string "Text" may not start on a 4 byte boundary.
Consider a FileInputStream object "fis" that points to your text file. use fis.read(byte[] array, int offset, int len) to read every four bytes. Convert the "TEXT" String into a byte array "TEXT".getBytes(), and yous the Arrays class to compare the equality of the read bytes with your "TEXT".getBytes()Wrong since it relies on my second point and will fail when fis.read(byte[] array, int offset, int len) does not read 4 bytes (as is no guaranteed to). Check the Javadoc. Also, the file may not be encoded with the default character encoding.
The problem is easily solved by reading a line at a time using a BufferedReader wrapping an InputStreamReader wrapping a FileInputStream and specifying the correct character encoding.
Edited by: sabre150 on Apr 29, 2009 2:13 PM -
How to read number of ';' in a text file
I have a text file with size 2kb. The file has names seperated by ';' . For example John, Smith; David, Putnam; etc ..
Now I have to read the file and find out how many ';' are there.
I tried GUI_upload to read the text file and I think I did not get whole data.
and
loop at itab.
if itab-names cs ';' .
find ALL OCCURRENCES OF REGEX ';' IN itab-names MATCH COUNT mcnt.
l_mstring = itab-names .
endif.
endloop.
I'm just getting count as 3
Edited by: P V on Feb 21, 2008 9:57 PMDATA : tot_count TYPE i,
mcnt TYPE i.
loop at itab.
if itab-names cs ';' .
find ALL OCCURRENCES OF REGEX ';' IN itab-names MATCH COUNT mcnt.
tot_count = tot_count + mcnt.
endif.
endloop.
You will get total number of ; available in file in the field tot_count.
Regards
Sudhir Atluru -
VBScript to read the content of a .csv file and delete old files mentioned in the .csv
I have a Windows 2003 file server.
I have generated a report in .csv format, about the files which are older than 1 year.
I need a VBScript to read the .csv file and delete the files which are enlisted there.
Can someone please help me with this?Look into the "Learn" link above. There are resources and instructions on how to write VBScript code. Look into how to use the FileSystemObject.
¯\_(ツ)_/¯
Maybe you are looking for
-
Can't figure out how to change the bottom margins
This is my 3rd day with a mac and I can't figure out how to change the margins in Pages '09 so that it doesn't include a .5 margin on the bottom. I'm using a HP OfficeJet J6450. In the page setup, I changed the "untitled" user defined margins to .1 f
-
My website redirects to OpenDNS ONLY in Safari. Please help!
Safari redirects my website, http://kyleayers.com to OpenDNS stuff every time. This doesn't happen in Firefox or Chrome. Anyone have any advice? Thank you so much. Kyle
-
Blackberry Bridge App not showing on phone
Hi, Firstly, I realise that this is more an issue for the phone forum, but it relates to the PB so have posted it here. I have a Pearl 9105 running OS6 (bundle 2646). I had Blackberry Bridge installed on it to connect to my PB, but since an upgrade t
-
Is there any limit for VISA allocate DMA memory ?
Hi, I have get an error: -1073807300, when I allocate memory for DMA larger than 4M Bytes. Is there any limit for allocate memory for DMA ? I have run the attach vi on win7 32bit or 64bit, It seems there is a limit at about 4M Bytes. However I can al
-
Graphics layer over video Layer problem
Hello! we are blu-ray applications developers and we have a problem with repainting graphics layer over video layer. In MHP this problem is solved using the method call repaint() to the HScene. This Method remove all graphics and paint again. But in