How to read User ID from the request Form and pre populating in the AD User process form before provisioning

I am trying to read the user Id from the submitted AD User request form( Catalogue AD User form. I need User Id,firstname and lastname inorder to prepopulate the common name as in this format - lastname,firstname (userid) for the user to be provisioned in Active Directory.
So after filling the AD User request form with User Id and Organization and submitting the request, I am trying to
prepopulate the common name in the process form before the provisioning.
The prepopulate adopter for the common name is configured to read the firstname, lastname and userid. firstname and
lastname variables are mapped to User definition and user Id is mapped to Process Data. In this setup I am not getting the
User Id value from process data, it is empty.
Is this a bug with OIM 11g R2 or I need to do it differently in order to read the user Id that user has entered in the
request form for populating the common name?
Thanks

Ghulam Yassen wrote:
How to get USER_ID and IP_AddressWhy exactly do you need this data and what do you plan to do with it?
The data is not reliable and trustworthy. IP addresses can easily be spoofed (a few seconds if you know what to do and how to do it). Also, IP addresses are not static. Users also do not use the same network device to access the database - different devices will have different IP addresses.
The o/s user on the client is supplied by the client driver. This can also be spoofed.
The user can also use a virtualised device - which means that recording the IP and o/s user seen from the server side, is pretty much useless and meaningless.
So if this data is intended to be used for auditing for example - it would be pretty suspect data to use for that purpose.

Similar Messages

How to read time stamps from a spreadsheet and calculate the difference between consecutive time stamps?

Hi,
I am new to Labview. This question might be a joke to some of you here, but any help would be greatly appreciated. I have a spreadsheet with time stamps and power outputs from a generator. I am supposed to calculate the difference between consecutive time stamps, which will act as a delay for the next power output update that needs to be sent. For example, lets say that I have to following data:
Time Stamp                    Power Output
11:00:00 AM                       3kW
11:00:02 AM                       2.9kW
11:00:04 AM                       3.2kW
11:00:06 AM                       3.1kW
The above data doesn't make any sense, but it is just for the purpose of this question.
So, I have to read 11:00:00 AM and 3kW initially - 3kW is the initial request that

Hello
you can simple subtract one time from the other one and so you get the difference. -> Example
Mike
Attachments:
Unbenannt 2.vi ‏8 KB

How to read an article from aol finance news and the insert in mail to other aol user.

I open up aol personal finance thru firefox. When I used aol as my provider I used to be able to send the article to another aol user by just hitting a forward tab and applying the address. Now that I dont use aol I dont have the tab and dont know how to send the article. There are a few articles that have a tab that says e mail a friend but not all of the articles.

Hi Marc,
Thanks for u r reply. But i am not using any java mail api to send the email. The Oracle BPEL provides an email activity for this and i am using the same to send the email. But when i include the <img> tag with "src= filename" i am unable to display the image. I think there is a ptoblem in passing the exact address of the image file. Do you have any idea abt where to place the image in order to use it in the bple process.
-Abhi

I would like to create a web that gives users choices from drop down menu and it then calculates the results back to them and copy to me

Hello I am a wedding planner and have decided to create new website. I would like to have the user make choices of different items and have it calculate so that they can print it off. Like an estimate of what costs would be to plan a wedding . I will be giving them different selections to choose from in drop down or radio selections .
I was thinking much like a shopping cart but that seems too involved is there a simpler way. Thank you for any help.

Just based on your question I can tell that you're probably not experienced enough to develop something like a shopping cart. Hiring a web developer is the way to go, as previously said.

How do I play audio from my headphone jack and internal speakers?

How do I play audio from my headphone jack and internal speakers at the same time ? I have a splitter for my audio jack so that when i connect up my second monitor I can have it so it also plays audio as well as anything else i have connected into the jack but how do i let the internal speakers emit sound at the same time?

Hello,
If you mean the internal speakers in your Mac, you can't play audio through them at the same time you have anything plugged into the headphone jack. When you plug something into the headphone jack, it disconnects the internal speakers.

How do I stop Firefox from filling in usernames and passwords when other people use my computer?

When other people use my computer, how do I stop Firefox from filling in usernames and passwords?

*Click the (empty) input field on the web page to open the drop down list
*Highlight an entry in the drop down list
*Press the Delete key (on Mac: Shift+Delete) to remove it.
Remove saved Password(s):
* Tools > Options > Security: Passwords: "Saved Passwords" > "Show Passwords"
Password Manager:
*http://kb.mozillazine.org/Password_Manager

Open 'Final Rating Page' with the New Proficiency Level Pre-Populated

Hi
Here is the requirement.
Competency rating entered in the 'Update Standard Appraisal' page, to be Pre Populated in the 'New Proficiency Levels' of the Final Rating Page. Though we have the Scores of the Final Rating Page pre populated with the proficiency levels selected in the previous page, if we do not have the New Proficiency Levels selected in the Final Rating PAge, then ratings would be stored as NULL. Meaning, user has to enter the information twice in the subsequent forms.
Is there a way to get this done? Please do suggest.
Thanks
Arun

Your template contains an IE Conditional Comment that is adding 30px of top padding to #sidebar1. This padding may required in older versions of IE but not IE9.

To fix it, change [if IE] to [if lt IE 9]
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

How to read a string from file & assign the val to a variable in batch file

Hi,
How to read a string from a file and assign the value to a variable then return the value to the screen in windows batch file?
Any suggestions?
thanks.

Unless this is a homework question then I don't see the purpose of doing this, but....
You should be looking a the supplied package utl_file to get the string out of the file, dbms_output to display the string and then google windows batch/command files calling sqlplus to execute your program.
Andre

How to read an XML from a servlet?

Hi,
I'm just starting programming and now I have a problem I can't solve. I hope someone can help me.</p>
On the client side I have a xml report and a script wich sends to the server the information I've got from the report. In this case, the 'Poliza' value.
On the server-side I have a servlet. I try to get the parameters (from the URL or from the XML), but I don't have any response on the client side. I'm sure I'm doing something wrong but I can't find the solution for solving it.
I suppose there are two ways of solving the problem.
- Make an http connetion and send just the parametes on the URL? Does anyone know how to make it?
- Reading the XML on the servlet and extract the parameters the script sent. Does anyone know how to read it?
Thank you in advance
I attach part of the code.
CLIENT SIDE
<report....>
<field sortid="0" id="Poliza" inputtype="textbox" label="Poliza" rows="1" wide="false" required="false"/>
</report>
<script name="ValidacionOnlineValidation1" script="if (0 == 0){
var szURL="http://URLServer/vonline/vonline?Poliza="+Poliza.value;
var szUserAgent = "JoP-XML_Posting_v1.0";
var m_XML;
/* In the line below, construct a XML-document that contains all the information you need to send to the server*/
var szXML = "<?xml version=\"1.0\"?><data><objects><object name=\"Poliza\" value=\"123456789\"/></objects></data>";
/* Create an instance of the MS XML Document Object Model Parser*/
m_XML= new ActiveXObject("Microsoft.XMLDOM");
m_XML.validateOnParse=true;
var bLoadResult = m_XML.loadXML(szXML);
if (bLoadResult==true) {
/*Instance of the transport object, method,...*/
var m_HttpReq = new ActiveXObject("Pocket.HTTP");
m_HttpReq.method = "GET";
m_HttpReq.Headers.create("Content-Type", "text/xml");
m_HttpReq.Headers.find ("User-Agent").Value = szUserAgent;
m_HttpReq.timeout = 150000;
/*Do the actual post of the data*/
var m_HttpResponse = m_HttpReq.GetResponse(szURL,m_XML.xml);
if (m_HttpResponse.statusCode==200) {...}
SERVER SIDE
protected void processRequest(HttpServletRequest request, HttpServletResponse response)throws ServletException, IOException {
     String Error="";
     String MSG = "";
     response.setContentType("text/html");
     PrintWriter out1 = response.getWriter();
     Enumeration arrayparametros = request.getParameterNames();
     for (;arrayparametros.hasMoreElements();){
          String parametro = (String)arrayparametros.nextElement();
          String valorparametro = request.getParameter(parametro);
          if (parametro.equals("Poliza")){
               vonlineLogica logica = new vonlineLogica();
               LOGS ="on";
               Respuesta respuesta = logica.procesarSolicitud(request,valorparametro);
               Error = Respuesta.getError();
               MSG = Respuesta.getMensaje();
          else{
               Error = parametro; MSG = valorparametro;
               String[] values = request.getParameterValues(parametro);
     out1.println("Result: " + Error + " / " + MSG);
     out1.close();
}

Thanks by your help Shanu.
Nevertheless, finally I tryed the easiest way (pass the parameter with 'GET'). Moreover I found why my code wasn't working. It was a fool thing. I though PDA connect throught a proxy, but it wasn't true. Whatever.
Regards.
FSG.
The final script on the xml-report is:
<report type="Validacion Online" required="false" multiple="false" attachments="false" scriptref="store://this/reportdef/script[@name='ValidacionOnlineValidation1']">
     <field sortid="0" id="Poliza" inputtype="textbox" label="Poliza" rows="1" wide="false" required="false"/>
</report>
<script name="ValidacionOnlineValidation1" script="if (0 == 0)
var szURL="http://URL/vonline/vonline?parameter1=";+Poliza.value;
var m_HttpReq = new ActiveXObject("Pocket.HTTP");                                             m_HttpReq.timeout = 15000;
var m_HttpResponse = m_HttpReq.GetResponse(szURL,"");
window.alert(m_HttpResponse.string);
if (m_HttpResponse.statusCode==200) {....}
else {....}

How can I remove iCloud from my Mac Book and iPad and Mac Book Air and then just reload back on the MB Air and iPad only?

How can I remove iCloud from my Mac Book and iPad and Mac Book Air and then just reload back on the MB Air and iPad only, which have a different user with a separate Apple ID?

You have quite muddied up the waters, I'm afraid. Assuming you now have a single GUID partition formatted Mac OS Extended, Journaled, you should try reinstalling Lion:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

How to read a mail from sap inbox thru abap code?

how to read a mail from sap INBOX thru abap code? can anyone tell me the technical approach? I NEED TO READ A MAIL and then need to pass the parameters to a bapi.
Message was edited by:
shahid mohammed syed

Hi SSM,
Did you manage to have your program working? I also have same requirement. I tried standard FM and BAPI but I always encounter authorization error when I tried accessing other user's mail. Thanks.
Regards,
Ryan

Hi i am new to labview. i want to extract data from a text file and display it on the front panel. how do i proceed??

Hi i am new to labview
I want to extract data from a text file and display it on the front panel.
How do i proceed??
I have attached a file for your brief idea...
Attachments:
extract.jpg ‏3797 KB

RoopeshV wrote:
Hi,
The below code shows how to read from txt file and display in the perticular fields.
Why have you used waveform?
Regards,
Roopesh
There are so many things wrong with this VI, I'm not even sure where to start.
Hard-coding paths that point to your user folder on the block diagram. What if somebody else tries to run it? They'll get an error. What if somebody tries to run this on Windows 7? They'll get an error. What if somebody tries to run this on a Mac or Linux? They'll get an error.
Not using Read From Spreadsheet File.
Use of local variables to populate an array.
Cannot insert values into an empty array.
What if there's a line missing from the text file? Now your data will not line up. Your case structure does handle this.
Also, how does this answer the poster's question?

The green PHONE icon has dropped from the bottom of the home screen and isn't among the icons that I have installed. I can get to it by searching but how do I get it back on the bottom of the home screen?

The green PHONE icon has dropped from the bottom of the home screen and isn't among the icons that I have installed. I can get to it by searching but how do I get it back on the bottom of the home screen?

Reset home screen layout.
This is covered in the manual:
iPhone User Guide (For iOS 4.2 and 4.3 Software)

How to read a table from one host to other host

Hi Everybody,
How to read a table from one host to other host.
For Example,
a/a@abcd - host 1
b/b@xyz - host 2
suppose im having a table called emp in a/a@abcd
i want to read the table emp in b/b@xyz
how to do this.??
I know that we have to create a dblink...after that how to proceed.
Plz help..
Thanks in Advance,
Gita

connected as scott/tiger@test
SQL>
CREATE DATABASE LINK local
CONNECT TO admin IDENTIFIED BY pinnet
USING 'pinnet';
Database link created.
sql>
select count(*) from
users@local;
COUNT(*)
16
Message was edited by:
jeneesh

How to keep .tag-files from accessing request?

How can i keep .tag-files from accessing the request? I only want to allow the .tag-file access to parameters given to it as input attributes.

Don't use the request object then.
People on the forum help others voluntarily, it's not their job.
Help them help you.
Learn how to ask questions first: http://faq.javaranch.com/java/HowToAskQuestionsOnJavaRanch
(Yes I know it's on JavaRanch but I think it applies everywhere)
----------------------------------------------------------------

How to read User ID from the request Form and pre populating in the AD User process form before provisioning

Similar Messages

Maybe you are looking for