How to reboot a blackberry without taking the battery out

For those Otter box fans and other cases users. Here's how you can reboot your Blackberry that keeps freezing and doing strange stuff without tearing it appppart.
Press all together and in that order
ALT + RIGHT-SHIFT + DEL (takes few seconds on the Q10 to reboot)
Enjoy

Small correction for the Q10, when you keep those 3 keys down for a while, the Q10 shuts down but doesn't restart by itself.
You need to turn it back on with the top button.
All other BBs will flash the red light and restart.

Similar Messages

When i try to play music on my blackberry curve it says "media is busy" i dont know what that means......how do i fix it without taking the battery out???

Help please
Solved!
Go to Solution.

"Media Busy" Maybe, maybe ur player innitializing the selected track ready to play it. Does it hang on Media busy for a long time?
Strange behaviour like this can be corrected with a reboot. Take battery out whilst your device is still switch ON. Wait 20 seconds or so, then re-inster your battery. Wait throught the reboot (about 5 mins). See if that helps. If not, sorry, cant help any further. A reboot fixes a lot of issues.

We have a 2009 white macbook it got to 7% power was shut down wont recharge tried taking the battery out and magsafe nor light on the magsafe

we have a 2009 white macbook it got to 7% power was shut down wont recharge tried taking the battery out and magsafe no light on the magsafe or power on the macbook? do we need a new magsafe or has the battery died?

Hi degsy t,
If you feel you may have potential battery or charger issues with your MacBook, you may find the troubleshooting steps in the following article helpful:
Mac notebooks: All about batteries
http://support.apple.com/kb/ht1446
Regards,
- Brenden

How to reboot RT programatically without using the VI

I have a bunch of PXI RT systems deployed. We setup an IVI looking interface for our client monitor systems to the PXI RT systems, this is over enet. Other than snooping the network activity, can anyone provide the command structure needed to send the reboot command to the RT systems? We can NOT use the included labview VI because some of our clients are running VxWorks.
Thanks!

Hello JFTICH,
For any PXI Real-Time systems that have LabVIEW Real-Time, the VI you spoke of will definately work. It sends the command to the specified PXI systems. After looking at the VI, I see that it is locked. The way that it creates this functionality is protected for some reason. Perhaps you could contact National Instruments Support for some more information regarding its method of operation.
You can create a service request here: ni.com/support
Steven T.

Hello! I'm out of the country and all my iWeb information is on my computer at home. Now I need to make changes on the webpage... how can i do that without using the computer i made the page on? Thank you!!

Hello! I'm out of the country and all my iWeb information is on my computer at home. Now I need to make changes on the webpage... how can i do that without using the computer i made the page on? Thank you!!

iWeb uses the domain.sites2 files to store its assets.
You'll find it here :
~/Library/Application Support/iWeb/
where ~ is your Home directory.
If you take a computer with you, you have to store that file in the same location.
It's not different from taking documents with you if you want to edit them.
A solution is to remotely control your computer at home.
TeamViewer, LogMeIn, Apple Remote Desktop or any VNC application you can use, like "Chicken of the VNC".

Logical backup of a schema without taking the data of particular table

How can I take the logical backup of a schema without taking the backup of data of a one particular table?? I need to give the dump to the client but I do not want to give them data of one particular table.

@Werner:
Requirement is to have a "logical backup of a schema without taking the backup of data of a one particular table".
I presume the requirement to have all tables with data and one table without data in a single dump file.
ROWS=N will not export any data for any table
:)

I blew a fuse in my house yesterday, and now my imac (desktop computer) will not turn on. How do I fix this without taking it to an Apple store?

I blew a fuse in my house yesterday, and now my imac (desktop computer) will not turn on. How do I fix this without taking it to an Apple store genius bar?

cflannigan60 wrote:
There is no sound or attempt to boot
Sorry, your only alternative is to take it in for repair. While on your way stop at a office supply store and look into a UPS. if you don't want to go to the Apple Store you can use an AASP, you can locate one in your area by clicking AASP Locator.

How do I discharge (calibrate?) my Macbook Air (Mid 2013) without harming the battery?

I just got the latest MacBook Air this week. And after reading the discussion here https://discussions.apple.com/message/22294118#22294118 I chose not to calibrate it the first time since it shouldn`t be necessary with lithium-based batteries.
The thing that still confuses me about the calibration issue with the Macbook Air (Mid 2013) is the text I`ve underlined below from Apples page and where they are talking about lithium-based batteries:
http://www.apple.com/batteries/notebooks.html
"Standard Maintenance
For proper maintenance of a lithium-based battery, it’s important to keep the electrons in it moving occasionally. Apple does not recommend leaving your portable plugged in all the time. An ideal use would be a commuter who uses her notebook on the train, then plugs it in at the office to charge. This keeps the battery juices flowing. If on the other hand, you use a desktop computer at work, and save a notebook for infrequent travel, Apple recommends charging and discharging its battery at least once per month. Need a reminder? Add an event to your desktop’s iCal. When your battery no longer holds sufficient charge to meet your needs, you may choose to replace it. If your notebook came with a built-in battery, you should have the battery replaced only by an Apple Authorized Service Provider."
So when Apple is talking about discharging, how should I actually discharge it? If discharging a lithium-based battery completely is harmful for the battery life, then what is the ideal way to do this without harming the battery? How should I discharge my battery when the calender says it`s time?

Calibration is not needed for "built-in" -non-removable- battery.
"Portables with built-in batteries
Current Apple portable computer batteries are pre-calibrated and do not require the calibration procedure outlined in this article. These computers use batteries that should be replaced only by an Apple Authorized Service Provider."
MacBook Air
MacBook Air (all models)
http://support.apple.com/kb/HT1490
"If your portable Mac has a built-in battery, you don’t need to calibrate the battery."
http://support.apple.com/kb/PH11078?viewlocale=en_US
Best.

How can i transfer videos without losing the sound to my iPhone 3G?

Hi
I have bought my iPhone 3G yesterday. I have found out how to transfer music from iTunes however i can't transfer videos. I'm selecting the videos i want to transfer on the videos tab after i chose my iphone from the side menu and pressing apply. iTunes says that its syncing my iphone but it doesnt transfer the videos.
Lately i have found out a function on the advanced menu for movies as "create iphone or ipod version". When i used that it transfered that video to my iPhone however the sound was completely lost besides that action takes too much time(around 10 mins for a 3 min video and i have a pretty strong computer).
How can i transfer videos without losing the sound to my iPhone 3G?

One thing I'd recommend is that you make sure the video/audio you're trying to transfer falls within the guidelines listed in the 'Video' section here:
http://www.apple.com/iphone/specs.html
What's most likely happening is that the file is not converted as such so when you try to transfer it, it's wanting to convert it but is unable to for any number of reasons.
There's software out there that might make this easier for you but I can't recommend anything specifically.

How can I copy/paste without copying the formatting?

How can I copy/paste without copying the formatting? For example, if I copy a sentence from a website and paste it on text editing program, it copies all the formatting as well. How can I turn that off?

There is an app called "No Formatting" in the App Store. It is simple and works perfectly - it strips formatting from paste (Ctr-V). I needed it for Word and Excel, which don't have keyboard shortcuts for this. It can be toggled on and off from the Menu Bar.

TS1424 Only partial songs downloaded when I purchased an album. How do I fix this without having the buy the whole album again?

Only partial songs downloaded when I purchased an album. How do I fix this without having the buy the whole album again?

If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the dodgy tracks and try redownloading fresh copies. For instructions, see the following document:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items.

Urgent:How to modify a script without changing the print programme

Hi all,
Can any body pls tell me <b>How to modify a script without changing the print programme</b>
Give m esome real time examples.
Good points willbe rewarded
Thanks

Hi
You can write a external Subroutine to fetch the extra data into the script program
see the following sample code
How to call a subroutine form SAPscripts
The Form :
/:PERFORM CDE_CENT IN PROGRAM ZKRPMM_PERFORM_Z1MEDRUCK
/:USING &EKKO-EBELN&
/:CHANGING &CDECENT&
/:ENDPERFORM
The report :
REPORT zkrpmm_perform_z1medruck .
DATA : BEGIN OF it_input_table OCCURS 10.
INCLUDE STRUCTURE itcsy.
DATA : END OF it_input_table.
déclaration de la table output_table contenant les
variables exportées
DATA : BEGIN OF it_output_table OCCURS 0.
INCLUDE STRUCTURE itcsy.
DATA : END OF it_output_table.
DATA : w_ebeln LIKE ekko-ebeln,
w_vbeln LIKE vbak-vbeln,
w_zcdffa LIKE vbak-zcdffa.
FORM CDE_CENT
FORM cde_cent TABLES input output.
it_input_table[] = input[].
it_output_table[] = output[].
READ TABLE it_input_table INDEX 1.
MOVE it_input_table-value TO w_ebeln.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = w_ebeln
IMPORTING
output = w_ebeln.
SELECT SINGLE zcdffa FROM ekko
INTO w_zcdffa
WHERE ebeln = w_ebeln.
it_output_table-name = 'CDECENT'.
MOVE w_zcdffa TO it_output_table-value.
MODIFY it_output_table INDEX 1.
output[] = it_output_table[].
ENDFORM.
COPING SCRIPT
There are some Standard Sap Scripts in SAP. We cant directly execute them in scripts we have to use some T-codes and by giving some input to the required fields we can see the output printform.
I will show one example. There are some Standard Sap Scripts such as MEDRUCK which is a standard Sap Script for Purchase Order and RVINVOICE01 for billing and so on...
To see oupt of MEDRUCK go to T-code ME9F give purchase order number and execute select one number and click on dislplay messages button on application tool bar you can find the print form of MEDRUCK.
You cannot change the Standard Sap Scripts but you can use Standard Sap Scripts and Copy them to userdefined Script and can make changes to them and replace standard Sap Script with usedefind script.
Ex: Go to SE71,
on menu bar u find Utilities->copy from Client. click on it u ll find new screen showing
Form name:
Source Clinet:
Target Form:
give Form name as usedefined form name EX: ZFORM1
Source client as 000 and
Target form as MEDRUCK.
execute.
Now, the standard from MEDRUCK is copyied to your form ZFORM1.
NOW, go to SE71 and give form name as ZFORM1 and do some changes to the form such as adding logo any thing. save and Activate.
Now, you have done changes to the Form ZFORM1 and u have to replace your form with standard SAP Script.
Go to NACE Transaction.
on Applications select EF for purchase order and click Output types button on application tool bar.
now select NEU as output types dobule click on Processing Routines.
now click on Change option on application tool bar and on right side u find MEDRUCK in form place replace MEDRUCK with ZFORM1 and SAVE.
go back twice and now go to T-code ME9F give the purchase order number and execute and select one option and click on display messges button .
you will find the changes that you have done in ZFORM1. so we cant chage the standard Sap Scripts by copying the Standard Sap Scripts we can chage and replace with our forms
Refer
https://forums.sdn.sap.com/click.jspa?searchID=4089895&messageID=3239299
Regards
Message was edited by:
Kiran Sure(skk)

How to call or open without specifying the full path?

hi all,
how to call or open without specifying the full path?
for example the following code of a when_button_pressed trigger.
call_form('c:\test\student.fmx',hide,do_replace);
open_form('c:\test\student.fmx');
i want to specify only the form name.
call_form('student.fmx');
open_form('student.fmx');
i m using developer 2000.
regard
Muhammad Nadeem
[email protected]

HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\FORMS60_PATH=c:\test\;c:\orant\bin;...

How can i start aperture without retyping the serial number?

how can i start aperture without retyping the serial number?

Quit Aperture.
Go to your Macintosh HD and open the folder "Library", then "Application Support", then "ProApps".
Remove the File "ProAppsSystemID" to the Desktop, if it exist and restart Aperture.
Reenter your serial number, hopefully for the last time.

How do I restart apex without restarting the database?

As the title says... How do I restart apex without restarting the database?
For the second time in as many weeks apex 3.0.1(?) has stopped working while the database (10gR2) hasn't missed a beat.
How do I restart apex?
How do I get it to restart automatically on failure.
How do I receive failure notification messages.
How do I diagnose the cause of the failure.
We were looking at using apex in a production environment but the prospect of unplanned restarts of production databases every week is a little daunting.
Regards,
David

David,
>> We're not using oracle http server as it's a 64 bit version so yes the whole thing is running within the database.
1) So your Web server is the XDB HTTP protocol server and embedded PL/SQL gateway (basically, the database's embedded Web server)? Is this 11g? If so, what platform?
2) Are there any reported issues in the database alert log?
3) When you check the status of the database listener, does it show services running for this specific port (default 8080, I guess)?
4) If you normally go to http://server:port/apex, when this situation occurs, what happens when you try and go to http://server:port?
Joel

How to reboot a blackberry without taking the battery out

Similar Messages

Maybe you are looking for