How to recover the recovery partition after delete all hard disk partitions

hallo
how to recover the recovery partition after delete all hard disk partitions in toshiba satellite pro c850-1fn ?
note that : I did not work recovery disc or usb to my laptop.
I have need of your help.

Satellite Pro C850-1FN (PSCBXE-01700EEN)
Restore the hard disk to its original out-of-the-box contents using Toshiba recovery media. All of the original partitions will be restored, including the recovery partition.
If no recovery discs were created, you can obtain them from Toshiba.
Toshiba Europe Backup Media Online Shop
For instructions, see the section Restoring the pre-installed software from your created Recovery Media on p. 4-18 of the User's Manual (attached).
-Jerry

Similar Messages

How to recover HP recovery manager after replacing a new hard drive

Recently i've got alot of BSOD saying Bad_System_Configuration_Info, and i ran a hp start up test and my hard drive failed the short DST test, so i searched online and it says that it means my hard drive is failing.
im planning to buy a new hard disk. i dont have a windows disk to recover my windows 7, so i wanted to copy the hp recovery partion from the old drive to the new one. i dont know how to do it, i wonder if anyone knows. i dont have any recovery disks and i dont think i can order one so i want to restore my new hdd without using disks and using my old hdd`s recovery manager from hp
i bought the computer in US but i moved to china so im assuming that i will buy a new HDD that is not from Hp ? i dont know if this will still work cause i hear that it has to be HDD from hp to work
This question was solved.
View Solution.

Hi,
Here's an alternative option you can use.
Before trying the following, make sure you can still read the 25 Character Product Activation key on your Windows COA label ( 5 blocks of 5 alpha/numeric sets ).
An example of a COA Label can be seen Here.
You can create an installation disc yourself using another PC - just download the correct Disc Image ( this must be the same version that originally came with your notebook - ie Windows 7 Home Premium 64bit ) from the link below and use an application such as ImgBurn to burn the ISO correctly to a blank DVD - a guide on using ImgBurn to write an ISO to a disc is Here. These Images are clean and from a well-respected source, however there are only limited versions available.
Windows-7 sp1-iso-official-32-bit-and-64-bit
Use the disc to perform the installation, enter the Windows activation key found on the COA Label when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
Any additional drivers and software you may need can be found Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

How to recover itunes store backup after deleted.

by mistake i was deleted my itunes backup how to recover them?

Hello Fah Ad,
Thank you for using Apple Support Communities.
It sounds like you want to recover restore a deleted backup you made of your phone from your iTunes library.
If you are using a Mac and use Time Machine, you can restore the file by going to the location where the folder that normally holds the file here:
Mac: ~/Library/Application Support/MobileSync/Backup/
Note: The "~" represents your Home folder. If you don't see Library in your home folder, Option-click the Go menu.
From: iTunes: About iOS backups
http://support.apple.com/kb/HT4946
Then use the Restoring data from Time Machine backups section of this article to restore your backup file.
Mac Basics: Time Machine
http://support.apple.com/kb/ht1427
If you are using Windows, here are the file locations for the backups you can use with your backup software to restore them:
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Note: To quickly access the Application Data folder, click Start, and choose Run. Type %appdata% and click OK.
Windows Vista, Windows 7, and Windows 8: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
Note: To quickly access the AppData folder, click Start. In the search bar, type %appdata% and press theReturn key.
Take care,
Sterling

How to recover the recovery hd in mountain lion

i notices the recovery hd is missing appear in my mountain lion ..how to recovery it...
Last login: Tue Jan 15 15:03:59 on console
theinarasu-2:~ theinarasu$ diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *750.2 GB   disk0
   1:                        EFI                         209.7 MB   disk0s1
   2:                  Apple_HFS Macintosh HD            644.0 GB   disk0s2
   3:       Microsoft Basic Data BOOTCAMP                105.8 GB   disk0s3
theinarasu-2:~ theinarasu$

You have to reinstall OS X. Open App Store > Purchases, and download and install Mountain Lion, so Recovery HD will be created.
Also, if your Mac is compatible with Internet Recovery, you don't need Recovery HD. See > http://support.apple.com/kb/HT4904

How to reduce the database size after deleting huge amount of rows?

Hi,
I have a large database. I removed almost half of the data/rows. Now i need to reduce the size of the database file as I need more disk space for the database file.
What should I do in details please.
Thanks.

Hi,
I have a large database. I removed almost half of the data/rows. Now i need to reduce the size of the database file as I need more disk space for the database file.
What should I do in details please.
Thanks.
Deleting large data would have ultimately put ghost cleanup into action. You would not be able to free space using shrink operation untill it completes. So wait for time and then start shrinking. You should note that shrinking would cause fragmentation and
you would have to rebuild indexes after shrinking is completed
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

Hard disk stop working how can recovery may new hard disk on mac book pro and i not have recovery disk the recovery is installed in soped hard disk

i have macbook pro the recovery is in hard disk and not have recovery disk and hard disk stop working now i want to change hard disk but how can i recovery my macbook pro can help me ?

"it shows macintosh HD OSX 10.9.5 but the hard drive that is supposed to be in the upper right corner is not showing up. So it is booting from that drive."
Ok go to "Finder" preferences and make sure the "Hard disk" box is checked.
That will make your boot disk show up in the upper right corner. You can tell it's a boot disk because all the files will look like this instead of just being blank files.

Why it takes long time to query ldap using the filter (uid=*) after deleting all(140000) the entries from the LDAP.

The platform we are using is Iplanet 5.1 running on Solaris 8 with Sun 280R dual processor 900Mhz with 4GB ram

Are you using replication? If so, this may be due to the fact that the database is now full of tombstone entries. So, how do you get rid of the tombstone entries? That depends on your update rate and the number of servers you replicate to, plus how painful it is to reinitialize all of the consumers.
If your tombstone purging is too aggressive, you risk losing state information you need during update resolution.
If you don't care about any of this, the easiest thing to do is to export your database then reimport. After this, you will have to reinitialize the other servers as well.

How to install OS X from .dmg onto a hard disk partition? - ALL LEGAL

Hi there,
I have a .dmg file with Mac OS X on it. How to I install it onto a partition I have created on my Mac's hard drive?
It is legal, don't worry, its dev software.
Thanks!

5. Definition of Confidential Information. You agree that the Pre-Release Software and any information concerning the Pre- Release Software ( _*including its nature and existence*_, features, functionality, and screen shots), the Seeding Tools, and any other information disclosed by Apple to you \[...], will be considered and referred to collectively in this Agreement as “Confidential Information.”
Note the emphasis above, provided by me. Mentioning that you have pre-release software is clearly sharing the information that it exists, and thus a violation of that agreement. How Apple chooses to proceed on such a revelation on their forums is up to them.
As to your question, if the pre-release software is given to you as a .dmg, I'm sure it is also accompanied by some kind of basic instructions as to what you're supposed to do with it. You'd better find those instructions, since nobody else who has access to that pre-release software is likely to want to jeopardize future invitations by answering you on a public forum.

HEADACHE!!! How to fix the unknown user on my external hard disks?

I applied 10.5.1 update and now my Volumes permissions are screwed!
Read thru similar problems in these discussion forums and not sure what the folks are writing about. Too technical for me. I basically know that if I can't correct the permission, I can't write or change stuff I need to do with the external HD.
I have an (unknown) Read & Write in my external HD's Get Info. I'm unable to remove it. If I tried to add a new name, my Finder will relaunch.
HELP?!!! Really need a step-by-step guide to fix this problem.

1. Launch System Preferences and select Sharing pref.
2. Select File Sharing and you'll see *Shared Folders:* and Users: boxes.
3. Drag affected Volume to the *Shared Folders:* box and you'll see the users permissions in the Users: box.
4. From the Users: box, you can add or remove users and correct their permissions.
Works for me. Didn't have to use Terminal which was too complex for me.

How to recover the database when some of the archive log file get deleted.

I am facing a problem with Oracle database, which is related to archivelogs.
Our development database is running in archivelog mode, but we don't have backups scheduled and have no recovery catalog.
When the database was in running condition, disk got full, so some archivelogs were deleted manually.
After this they restarted the DB, and now DB is not coming up. Errors are as follows:
SQL> startup
ORACLE instance started.
Total System Global Area 1444383504 bytes
Fixed Size 731920 bytes
Variable Size 486539264 bytes
Database Buffers 956301312 bytes
Redo Buffers 811008 bytes
Database mounted.
ORA-01589: must use RESETLOGS or NORESETLOGS option for database open
SQL> alter database open resetlogs;
alter database open resetlogs
ERROR at line 1:
ORA-01113: file 1 needs media recovery
ORA-01110: data file 1: '/export/home/oracle/dev/ADVFRW/ADVFRW.system'
SQL> recover datafile '/export/home/oracle/dev/ADVFRW/ADVFRW.system'
ORA-00283: recovery session canceled due to errors
ORA-01610: recovery using the BACKUP CONTROLFILE option must be done
SQL> recover database using backup controlfile;
ORA-00279: change 215548705 generated at 09/02/2008 17:06:10 needed for thread
1
ORA-00289: suggestion :
/export/home/oracle/dev/ADVFRW/ADVFRW.archivelog1/LOG_ADVFRW_1107_1.ARC
ORA-00280: change 215548705 for thread 1 is in sequence #1107
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
/export/home/oracle/dev/ADVFRW/ADVFRW.archivelog1/LOG_ADVFRW_1107_1.ARC
ORA-00308: cannot open archived log
'/export/home/oracle/dev/ADVFRW/ADVFRW.archivelog1/LOG_ADVFRW_1107_1.ARC'
ORA-27037: unable to obtain file status
SVR4 Error: 2: No such file or directory
Additional information: 3
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
CANCEL
Media recovery cancelled.
SQL>
1. How to recover the database and bring it online
Any help will be highly appreciated.
With Regards
Hemant Joshi
Edited by: hem_Kec on Sep 7, 2008 9:07 AM

Hi,
Archive log files are the copies of redolog files.As redo log files are circularly overwritten,oracle generates archive log file of the corresponding redo logfiles being overwritten.So if you have a backup that dates back to 10 am in the morning and if your database creashed at 3 pm,you cannot use the redo log files alone as they have incomplete information.To completely recover the database upto 3 pm,you need archive log files generated between 10 am to 3 pm. In your case since you are missing one archive log file,you cannot perform complete recovery and hence would suffer data loss.

Due to reinstallation of mac 2nd partition is nt showing how to recover the partition and data

Due to reinstallation of mac 2nd partition is nt showing how to recover the partition and data

If you have no backup your only option is to perform incomplete recovery (point-in-time recovery) to the time just before the drop, export the table and then restore the database (for example, from a cold backup taken just before the incomplete recovery,) and import the table. This obviously requires a full backup
taken before the drop which you don't seem to have, so the answer is "regrettably no."
If you have a backup;
Take backup of ur current db, apply previous day backup, do point in time recovery to get table back,export table, shutdown and apply latest backup, import table back
Regards,

How to recover the deleted SMS message, Contacts, CallHistory and Photos from ipad.

how to recover the deleted SMS message, Contacts, CallHistory and Photos from ipad.

If you did the backup of your data before deleting then you can easily get back the data by the following steps:
1. First don’t connect your iPad directly to computer because the iTunes only saves the most recent backup
2. Now make sure that you have a valid backup as listed iTunes> preferences> devices
3. Before connecting your iPad make sure to check iTunes>preferences> devices "prevent iPad from syncing automatically." Because this will ensures we don't erase the previously stored backup. Then select ok and close the window after checking " don't sync"
4. Now connect your iPad to your computer .
5. Select the iPad as seen in the left bar of iTunes, as listed under the devices .
6. Select version and click on restore from options.
7. It takes a while to for iPad to erase itself, reset and restart.
8. After the iPad is restart you will see Set Up Your iPad in iTunes on your computer, and now just click the restore from the backup and click continue. It will take 10 to 12 minutes to recover your data from iPad, including the deleted sms, notes, photos, music, contacts etc.
Here is a step by step guide for you: http://www.video-converter-mac.org/recover-deleted-ipad/

How do I re-download apps, such as a game, that I have 'trashed'? When I go to the apps page after deleting it it still comes up with the price as if its going to charge me again.

How do i re-download apps after deleting them off my computer without having to re-pay for them?

cliffyhowie17 wrote:
... I'm looking for apps that I've download off the App store for my Mac! ...
Go to the Mac App Store... Sign In using the same Apple ID that made the Original Purchase and re-download...
More Info here > http://support.apple.com/kb/HT4461

How to recover the deleted reports from crystal reports XIR2

Hi,
There have been few crystal reports have been deleted from crystal environment and i would like to know how to recover them. please advice the best possible ways to recover them. CMS repositoty in SQL server database
thanks in advance
Regards,
Krishna

Hope, your question is this "How to recover the deleted Crystal reports in XI R2".
Answer for this question is...
Yes, it is possible if you have backup of your CMS and FRS.
Copy the CMS database from the backup to your database server and point the CMS ODBC system DSN to it.
Copy the backed up file store to a Temp directory.
Change the path of input and output file repository servers in the CMC, for each server, to the Temp file store directory.
You will now be able to find the reports. Copy those reports to the BO server's local disk, or create a BIAR file using the Import Wizard.
Point the ODBC system DSN back to the original database and also change the paths on input file repository and output file repository servers back to their original locations.
Publish the reports to Enterprise from the BusinessObjects server's local hard disk.

How to recover the deleted FSV in ob58

Please guide me how to recover the deleted FSV.

The forum [FPM - General|Enterprise Performance Management (SAP EPM); in which you originally posted your question deals mainly with the financial performance applications otherwise known as Enterprise Performance Management (EPM) carrying the BusinessObjects brand. Your question pertains to SAP [ERP Financials|SAP ERP Financials; which is covered by another forum. Therefore your message has been moved. Please adjust any bookmarks you might have and post to the appropriate area in the future, that way you are assured you will have the right audience reading your posts.
Thanks and best regards,
[Jeffrey Holdeman|http://wiki.sdn.sap.com/wiki/display/profile/Jeffrey+Holdeman]
SAP Labs, LLC
BusinessObjects Division
Americas Applications Regional Implementation Group (RIG)

How to recover the recovery partition after delete all hard disk partitions

Similar Messages

Maybe you are looking for