How to refresh changed data in a plannable template with the Enter Key

Hi,
The situation I face is as follows.
Integrated Planning is being implemented as a tool for budgeting. The user changes a value in a plannable cell on the portal and wishes to see the new updated data by pressing ENTER. Currently we have provided a REFRESH button so that the user gets the desired result.
Is it possible to see the updated value by pressing ' ENTER' and if so , whats the way around to do it.
thanks in advance.
Jaya

Hey guys,
I'm interested too in this solution. In BPS there is an additional function described in the HowTo Paper HowTo run planning functions on save and other events
Now I'm looking for this possibility in IP as well in excel-based IP and web-based IP. For example a copy function should be executed automatically when pushing the enter key.
Thanks a lot!
Clemens

Similar Messages

My email gives 2 sender addresses, it always automatically goes to the one i don't want as my email address, i try to remember to change it. how do i change it to automatically come up with the one I want

my icloud email gives 2 sender addresses, (icloud.com and me.com) it always automatically goes to the one i don't want (icloud.com) as my email address, i try to remember to change it to (me.com). how do i change it to automatically come up with the one I want (me.com)

On your iOS device, go to Settings > Mail, Contacts, Calendars > iCloud > Account. Tap Mail, tap Email, then tap the address you want to send from.

Run the data copy and comments copy with the same key

I want to Run the data copy and comments copy with the same key.
I tried to challenge in the following way, but it is an error.
1. Add the process in the process chain [/ CPMB / COPY] process in the process chain that could be new to copy the chain [/ CPMB / COPY_COMMENTS] (see capture)
2. Select the newly can process chain to add a package, make a change to the script as follows:
PROMPT(RADIOBUTTON,%TARGETMODE%,"Handling of records",0,{"Copy records with match key","Copy by replacing data in same data region of Entity, Category, Time and Audit ID"},{"0","2"})
PROMPT(RADIOBUTTON,%RUNLOGIC%,"Select whether to run default logic for stored values after copying",0,{"Yes","No"},{"1","0"})
PROMPT(RADIOBUTTON,%CHECKLCK%,"Select whether to check work status settings when importing data.",1,{"Yes, check for work status settings before importing","No, do not check work status settings"},{"1","0"})
PROMPT(COPYMOVEINPUT,%SELECTION%,%TOSELECTION%,"Select the members to COPY and where to",%DIMS%,0)
INFO(%TEMPNO1%,%INCREASENO%)
INFO(%ACTNO%,%INCREASENO%)
INFO(%SELECTION_KEYDATE%,)
TASK(/CPMB/COPY_COMMENTS,SELECTION,%SELECTION%)
TASK(/CPMB/COPY_COMMENTS,TOSELECTION,%TOSELECTION%)
TASK(/CPMB/COPY_COMMENTS,CHECKLCK,%CHECKLCK%)
TASK(/CPMB/CM_CONVERT,OUTPUTNO,%TEMPNO1%)
TASK(/CPMB/CM_CONVERT,ACT_FILE_NO,%ACTNO%)
TASK(/CPMB/CM_CONVERT,SAPPSET,%APPSET%)
TASK(/CPMB/CM_CONVERT,SAPP,%APP%)
TASK(/CPMB/CM_CONVERT,SELECTION,%SELECTION%)
TASK(/CPMB/CM_CONVERT,TOSELECTION,%TOSELECTION%)
TASK(/CPMB/CM_CONVERT,KEYDATE,%SELECTION_KEYDATE%)
TASK(/CPMB/CLEAR_SOURCE_CUBE,CHECKLCK,1)
TASK(/CPMB/CLEAR_SOURCE_CUBE,SELECTION,%TOSELECTION%)
TASK(/CPMB/CLEAR_SOURCE_CUBE,KEYDATE,%SELECTION_KEYDATE%)
TASK(/CPMB/CLEAR_SOURCE_CUBE,DUMPLOADMODE,3)
TASK(/CPMB/APPEND_LOAD,PREPROCESSMODE,0)
TASK(/CPMB/APPEND_LOAD,TARGETMODE,0)
TASK(/CPMB/APPEND_LOAD,INPUTNO,%TEMPNO1%)
TASK(/CPMB/APPEND_LOAD,ACT_FILE_NO,%ACTNO%)
TASK(/CPMB/APPEND_LOAD,RUNLOGIC,1)
TASK(/CPMB/APPEND_LOAD,CHECKLCK,1)
TASK(/CPMB/APPEND_LOAD,KEYDATE,%SELECTION_KEYDATE%)

We performed similar transfer of data from one planning model to another using DM package linked to BADI. In your scenario there is additional complexity of doing lookup from DSO and should be possible.
Also check these references for performing lookup in DSO.
abap code to populate data from DSO
something about SAP: How to look for DSO&#8217;s tables?

How to get Header data into multiple times along with the Line Items

Dear All,
I have problem while mapping the Header data and line item data to the flat file structure, Header data have to repeat along with the Line item data in the flatfile.
Details is below.
Example
Header record is one
E1EDK01
E1EDKA1
Line items are two
E1EDP01
E1EDP01
I want in the flat file two records having duplicate data in the fields which is belongs to header data
Like :
Record # partner data     Line item data
Record 1 : WE name1 city   00010 materialname1 156
Record 2 : WE name1 city   00020 materialname2 198
( WE name1 city - data is same in the record 1)
For this what I did is I mapped the node E1EDP01 to the flat file message type node then I got all the line item data and first record is with header data but not in the second record.
I tried all node functions but no result because Idoc itself header data exists one record, I am not able to copy.
If any one knows , please give solution.
It is great help to me.
Thanks in Advance.
Ramarao

Dear Ramarao,
This will help you,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f59730fa-0901-0010-df97-c12f071f7d3b
No Documentation for Mapping Function useOneAsMany (Mapping Problem)
/people/claus.wallacher/blog/2006/04/17/replication-of-nodes-using-the-graphical-mapping-tool
/people/narendra.jain/blog/2005/12/30/various-multi-mappings-and-optimizing-their-implementation-in-integration-processes-bpm-in-xi
/people/sravya.talanki2/blog/2005/12/08/message-mapping-simplified-150-part-ii
Thanks & Regards
Agasthuri Doss

How to save changed data from a input field to the source structure

Hi,
I have a small problem with the onChange event with HTML input fields.
When changing a value of a input field or by creating a new value for a field the OnChange event is called by moving away the mouse pointer....
get_form_field( 'field_name' ).
But is it possible to write back the new value in the source field ls_screenstructure_field1 without using the OnInputProcessing?
I ask because my application´s structures have a lot of fields that should be filled and changed by input fields.
It´s not comfortable to request every new value with .. = request->get_form_field(... .
Thanks for helping.
Cheers,
André

you wanted a onchange for a htmlb:inputfield which would also trigger server event. try the following code.
<htmlb:inputField id            = "test"
                            alignment     = "LEFT"
                            size          = "6"
                            required      = "TRUE"
                            doValidate    = "TRUE"
                            type          = "INTEGER"
                             />
<bsp:htmlbEvent id="myid" onClick="myonclick" name="ValueChanged" />
<script for="test" event=onchange type="text/javascript">
alert(this.value);
ValueChanged();
</SCRIPT>
if the value in the inputfield is changed it would trigger a alert at the client side and also trigger a server event. now you can caputre the value in oninputprocessing.
Hope this helps.
do let us know if you need help in how to capture this value in oninputprocessing.
Regards
Raja

How to refresh report data from bex query (BW) with parameters

Hello,
i hope someone can help me with my problem. I developed an desktop application, which loads (actual state) a report from the local file system. After setting the parameters, the report should be saved as a pdf file. Loading the report into the ReportDocument object and exporting the report to a pdf works fine. Setting parameters (without) a data source too. But now i can't refresh the data in the reports given by a parameter (e.g. time).
I know there are two methods to do this. Push and pull. I want to use the pull method, cause my program should exports different reports and i think it should be easier to handle this with this method.
On my development environment is installed:
Crystal Reports SP 4
MS Visual Studio 2010 (coding with C# .NET)
.NET Framework 4
SAP Integration Kit
Crystal Reports for Visual Studio 2010 SP1 - SDK libraries
Crystal Reports for Visual Studio 2010 SP1 - Runtime 32 bit
SAP GUI 7.20 (Compilation 3)
The bex query is enabled for external use from ole db for olap. Do i have forget something else?
Here is a part of my code:
        public ReportDocument doPullMethod(ReportDocument crReportDocument)
            TableLogOnInfo crTableLogOnInfo = crReportDocument.Database.Tables[0].LogOnInfo;
            ConnectionInfo crConnectionInfo = crTableLogOnInfo.ConnectionInfo;
            crConnectionInfo.Password = "*******";
            crReportDocument.SetDatabaseLogon(crConnectionInfo.UserID, crConnectionInfo.Password, crConnectionInfo.ServerName, crConnectionInfo.DatabaseName);
            MessageBox.Show(crConnectionInfo.UserID + " _ " + crConnectionInfo.Password + " _ " + crConnectionInfo.ServerName + " _ " + crConnectionInfo.DatabaseName);
            for (int i = 0; i < crReportDocument.Database.Tables.Count; i++)
            //    crReportDocument.Database.Tables<i>.ApplyLogOnInfo(crTableLogOnInfo);
                MessageBox.Show("TestConnectivity: " + crReportDocument.Database.Tables<i>.TestConnectivity());
            return crReportDocument;
Cause i'm using only one bex query, i know that the SetDatabaseLogon()-method should bring me the same result as the ApplyLogOnInfo()-method SAP Crystal Reports .NET API Guide
Exists an order which i have to follow? First setting parameter and then set the login informations or backwards? Cause i also get the "Failed to load database information" exception, when i set a parameter and TestConnectivity() returns false.
Do i have to activate the data refresh manually or will be the data refreshed automatically on export?
I searched in this forum (.NET - SAP Crystal Reports) and found only this thread which according to my problem:
[Re: Crystal report connects to BW RFC by .NET;
The question is assumed answered.

Hi Robin,
There is a SAP Integration Kit you need to allow CR to connect to SAP data sources. There isn't one for CR for VS 2010 and I don't believe there are the various extra options available in the SDK, no SDK access to the DB driver.
Possibly, Check the other post, download and run the app Ludek suggested, it will get the connection info for your report using RAS and then plug the output code into your code and see if that works. It should show the crdb_olap dll is the database driver, assuming that is the connection method you used when designing the report.
Pay attention to the database dll in the output from that app and verify it is on your PC in: C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86
If that doesn't work then.....
The problem is, CR for VS 2010 ( version 13 ) is the runtime for BOE 4.0 ( version 14 ) which includes the Integration kit drivers on install. There is no standalone install of the database drivers. They are installed with CR 2011, which doesn't have a SDK included, CR for VS 2010 is also the Developer version for CR 2011.
Because of the "custom" connection requirements there is no SDK or access to the BW datasource extra options....
Also note that CR 2008 is not supported in VS 2010, it should work though as long as you stick to 2.0 -> 3.5 framework, no 4.0 Framework support in CR 2008 or BOE 4.0
You may want to try the SAP Integration Kit forum to see if anyone has been able to make this work or contact your account manager to verify if there are any plans to do what you are doing....
Don

How to remove boot options while booting in mac with the options key

I've just installed windows trough bootcamp, but somethings went little bit wrong,
Everythings works fine, mac works and windows 7 works properly. But when i hold down the option key while booting i dont have the normal 3 options (Mac, Windows, Mac Restore). I now see these options (MAC, Windows, Windows, Windows efi, mac restore).
MAC -> works fine
1e windows -> (error no operating system installed)
2e windows -> works fine
3e Efi windows (boots into mac)
MAc restore -> works fine
So is there an way to clean up these options?
Thanks

You think someone will use Boot Camp Assistant?
EFI is / was always there. Sometimes it shows up (from using Disk Warrior).
Windows has its own 100MB system reserved as well that is the boot area.
I'd start with Lion Recovery, show hidden features and partitions, and check the health of all, and repair HFS volume.
Also try your Windows DVD and see if it sees a problem.

How can I use the enter key instead of tab to change field focus?

I am using Acrobat 9 Pro.
We have a fillable PDF where the users enter numbers into fields. They want to be able to use the <enter> key on the 10-key pad instead of the <tab> key on the keyboard to move the focus to the next data entry field.
How can I set my PDF so that it recognizes the <enter> key instead of the <tab> key for changing focus?
Thanks!

You can use a custom Keystroke script, something like:
// Custom Keystroke script for text field
if (event.willCommit && event.commitKey === 2) {
getField("Text2").setFocus();
Where "Text2" is the name of the next field. This doesn't disable the Tab key though. For more information, see: http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/JS_API_AcroJS.88.608.html

How to get changed data in ALV in Web Dynpro for ABAP

METHOD on_data_check .
DATA:
    node_spfli                          TYPE REF TO if_wd_context_node,
    node_sflight                        TYPE REF TO if_wd_context_node,
    itab_sflight2                        TYPE if_display_view=>elements_sflight.
node_spfli = wd_context->get_child_node( name = if_display_view=>wdctx_spfli ).
node_sflight = node_spfli->get_child_node( name = if_display_view=>wdctx_sflight ).
CALL METHOD node_sflight->get_static_attributes_table
    IMPORTING
      table = itab_sflight2.
this code is ..get all data(changed and not changed)
but i want get changed data only, not all data.
how to get changed data?
Edited by: Ki-Joon Seo on Dec 27, 2007 6:04 AM

Hi,
To get only the changed data in the ALV grid of a WD, you need to capture the "ON_DATA_CHECK" of the ALV grid.
To this please do the following in the ALV initialization of the ALV table settings :
    lr_table_settings->set_data_check(
            IF_SALV_WD_C_TABLE_SETTINGS=>DATA_CHECK_ON_CELL_EVENT ).
You may also do this:
    lr_table_settings->set_data_check(            IF_SALV_WD_C_TABLE_SETTINGS=>DATA_CHECK_ON_CHECK_EVENT)
The above two ways would depend on when do you need to check for the changed data. If you want to check the data as soon as it is entered, then use the first method. Else, use the second method.
You need to register an EVENT HANDLER for this event.(You may do this in your VIEW or Component Controller).
In this Event handler, you would find an importing parameter R_PARAM which is a ref type of      IF_SALV_WD_TABLE_DATA_CHECK.
The attribute T_MODIFIED_CELLS of this interface IF_SALV_WD_TABLE_DATA_CHECK will contain the modified cells of the ALV with the old & new values.

How to get change date in Production Order ?

Dear Friends,
I want to know it, how to get change date in Production Order "Administration-TAB".
F1-Help, It is displayed with "Change date for Order Master". and Structure table "CAUFVD".
But, CAUFVD is not Transp. Table.
Which table should I read ?
Thanks in advance
Yamazaki-H

Dear Friend
Thank you for an answer.
It was settled.
Best regards.

How can I change dates to the UK format, DD/MM/YY, in Mac Numbers?

How can I change dates in Mac Numbers to the UK format of DD/MM/YY? When I correct them individually they automatically return to the US format.

Open System Preferences, then click the "Languages & Region" pane in the first row.
Change the Region from "United States" to "United Kingdom"

How can you change data on a SQL 2012 application database that uses availability groups from BizTalk server?

If you use the WCF-SQL adapter it is recommend that you set UseAmbientTransaction to true if you are changing data. I think this requires MSDTC to be enabled on the SQL server that you are changing the data on. (http://msdn.microsoft.com/en-us/library/dd787981.aspx)
I think that Availability groups does not support MSDTC. (http://msdn.microsoft.com/en-us/library/ms366279.aspx).
How can you change data on a SQL 2012 application database that uses availability groups from BizTalk server?

Hi,
Yes, Availability groups doesn't support MSDTC. Please refer to the similar discusison which maybe helpfull:
http://dba.stackexchange.com/questions/47108/alwayson-ag-dtc-with-failover
http://stackoverflow.com/questions/17179221/msdtc-in-always-on-availability-groups

How can I change data carriers on my ipad?

How can I change data carriers on my ipad mini?

Get a plan from a different carrier and insert the sim they give you.

How do i change date in iphoto on an event?

how do i change date in iphoto on an event?

Change the dates on the photos. Then, to force iPhoto to revise the ctalogue, flag the photos and go: Events: New Event from Flagged Photos.
Regards
TD

Editable ALV, how to capture changed data

Hi All,
I have created an editable ALV. User can make some changes in the displayed record and press "Submit" button (custom button on application toolbar), the program should validate the data and write the file on application server if validations are successful otherwise controls stay on the same screen.
I am handling this validation and writing file part in PAI of the screen.
Problem: The program is capturing the data when user changes it for the first, but program is failing to capture the subsequent changes (user makes after the validation fails). Program processes always the first time changed data only. Please help me in getting this problem resolved.
Step1 : Program shows output.
Step2: User changes Company Code.
Step3: User clicks on Submit Button.
Step3.1: Program reads the new data and performs validation.
Step3.2: New Company code is not valid, error displayed.
Step4: User changes the company code again, presses submit button.
Goto step 3.1 -> Here program does not read the new data, rather first time changes company code is again read and validated, and program shows the same error again, which is not a desired result

Hi Ashish,
you need a method HANDLE_DATA_CHANGED as handler for grid event DATA_CHANGED.
Use
LOOP AT er_data_changed->mt_mod_cells ASSIGNING <mod>.
to check all changed data. In this event, add the error messages to ER_DATA_CHANGED object.
set all required handlers, i.e.
SET HANDLER:
      handle_data_changed          FOR ro_grid,
      handle_data_changed_finished FOR ro_grid,
      handle_toolbar_set           FOR ro_grid,
      handle_user_command          FOR ro_grid,
      handle_hotspot_click         FOR ro_grid,
      handle_f4                    FOR ro_grid,
      handle_f1                    FOR ro_grid.
   ro_grid->set_toolbar_interactive( ).
Register ENTER and MODIFIED events.
    ro_grid->register_edit_event( cl_gui_alv_grid=>mc_evt_enter ).
    ro_grid->register_edit_event( cl_gui_alv_grid=>mc_evt_modified ).
Regards,
Clemens

How to refresh changed data in a plannable template with the Enter Key

Similar Messages

Maybe you are looking for