How to Register as a Developer on SAP NetWeaver ABAP 7.02 Trial Version

Hi Everyone,
I was following a tutorial on ABAP and this centred on "Hello World" application. I got a message that I haven't been registered as a Developer on the system and that I need some code from OSS. I have tried checking here for any clues but it seemed none existed. Can't SAP be a bit more simplified like MS? It really requires lots of effort to get the right help and even at that, helps are not easily come by. I really which someone would point me in the right direction this time.
Thank you.

plz can u answer me to solve my problem... i download SAP Netweaver 7.02 and install it ...... when log on to SAP i can not make any think ..... SAP tell me You are not registered as a developer ... please register in the online service system (OSS). in the OSS you will receive an access key.
i log on by
DDIC and BCUSER
and i have the same problem
PLZ tell me how can registered my self as a developer on sap to get access key ..?

Similar Messages

  • Unable to renew the SAP NetWeaver ABAP 7.02 Trial Version license

    Greetings,
    My license for SAP NetWeaver  ABAP  7.02 Trial Version has expired and I was trying to renew the license the other day. I was able to install the new license but, unfortunately, I were not able to delete the old licence not activate the new one.
    I logged on with user: SAP* to install the new license and it was installed successfully. When I do try to delete the old one the system gives this error message: " Only the administrator is allowed to delete licenses. When the valid system license has expired, only the user SAP* can log on to the system. in this case, it would be dangerous to delete a license.
    This is why the user SAP* is never allowed to delete a license."
    Anybody can assist me with the license renewal please ?!
    TIA

    My problem is solved ,, thanx whoever looked at it :).
    the solution was that I downloaded and NSP license key but for an other version of the product.
    Thanx.

  • SAP NetWeaver ABAP 7.02 Trial Version - CPRXRPM

    Hello Experts,
    I have installed the "SAP NetWeaver ABAP 7.02 Trial Version" from SDN downloads and as you know it comes with SAP_ABA, SAP_Basis, PI_Basis, SAP_BW components.
    I still need CPRXRPM component. is it possible to add the CPRXRPM component to the above mentioned trail version?
    Please advice, also have any one done this before?
    Thanks in advance for your time,
    regards,
    K

    Hello Florian thanks for your quickest response. I would like to emphasize that I have installed the "SAP NetWeaver ABAP 7.02 Trial Version" from SDN downloads it comes with SAP_ABA, SAP_Basis, PI_Basis, SAP_BW components.
    I still need CPRXRPM component. is it possible to add the CPRXRPM component to the above mentioned trail version? Please confirm.
    Also have any one done this before?
    regards,
    K

  • Uanble to Download SAP NetWeaver ABAP 7.02 Trial Version

    I tried to download SAP NetWeaver ABAP 7.02 Trial Version but Iam getting a message
    "Unfortunately there was a technical issue completing your download request. Please try again later."
    I tried to download the same again after 8 hours but Iam receiving the same messge not only for ABAP 7.02 Trial Version but for all the SAP Main Releases.
    Please help me resolve the issue!!!

    Hello Florian thanks for your quickest response. I would like to emphasize that I have installed the "SAP NetWeaver ABAP 7.02 Trial Version" from SDN downloads it comes with SAP_ABA, SAP_Basis, PI_Basis, SAP_BW components.
    I still need CPRXRPM component. is it possible to add the CPRXRPM component to the above mentioned trail version? Please confirm.
    Also have any one done this before?
    regards,
    K

  • How can i add FICO module to the SAP Netweaver ABAP 7.02 trial version

    Dear Brothers
    I am a new learner of SAP and interested in learning FICO. As part of that I installed SAP Netweaver ABAP trial version and after the installation I had problem in Logging in but it was solved lately. Now I face an other challenge which I may share with u guys. After logging in I wanna start with a new company code creation for FICO but I cant find the Enterprise Structure for in SAP Reference IMG. Only I see the following structure
    SAP Customizing Implementation Guide
         Activate Business functions
         SAP Net weaver
         Cross-Application Components
         Financial Supply Chain Management
         Integration with Other my Sap.com components
    I expanded the tree structure but could not find the Enterprise Structure> Definition> Financial Accounting--> Define Company
    So is this because of missing FICO module if so how can I install that module for I can learn myself @ home. Kindly help me to fix this prob and hope to hear from the SAP experts around the world.
    W8ng for a reply have a gr8 day a head
    Thnx
    Cherian

    My problem is solved ,, thanx whoever looked at it :).
    the solution was that I downloaded and NSP license key but for an other version of the product.
    Thanx.

  • Steps to setting up BI in SAP Netweaver abap 7.0 trial version

    Hi all,
    I meet some difficulties to setting up BI in SAP Netweaver 7.0 trial version
    I do those steps:
    - loggin to client 000 with user DDIC pwd minisap
    - Change client active to 001 with transaction SE16
    - Enter table name RSADMINA
    - Enter BW in the CUSTOMZID field and click Execute (press F8)
    - Select the table row BW and click change (press F6)
    - Enter 1 for the BWMANDT and click save
    - Run SU01
    - create new user NWUSER
    - initial pwd for the NWUSER sap2009
    - create grant (SAP_ALL, SAP_NEW)
    - save
    - log off on the system
    - login to client 001 with new created user NWUSER
    - I can't loggin --> name or password is incorrect (repeat logon)
    Wich step i missed?
    Please help me, i need to pratice some tuto on BI platform
    Thanks and bests regards
    Souad

    Hi all,
    I arrived to active BI platform in sapnetweaver trial version 7.01, i follow this steps.
    1/You need to login to 001 client as SAP* password minisap
    2/Create your own user in SU01 transaction and log in with your own user.
    3/Then run Administration workbench of BW (RSA1) and create and assign of logical system to your client,
    4/replicate DataSources form its own BW system.
    It's easy and simple.
    Trial version had a limit, when i tried to create a transformation between a datasource an InfoObject i meet some trouble. Log message suggest to install frontend of sap netweaver to resolve this trouble.
    This topic is close
    Thanks Uday
    Kinds Regards.
    Souad

  • How to register as a developer in SAP

    hi
    how to register as a developer in SAP,
    i got to make soe chages to the extract structure for that i need the access key.
    any one can please give me the required information.
    regards
    sampath.

    Hi,
    you need to goto the service marketplace http://www.service.sap.com
    There you can register as a developer in your system (you need the installation no. of your system for that -->system->status) and you get access key for sap objects if necessary.
    kind regards
    Siggi

  • Where to get license key for SAP Netweaver ABAP 7.01 trail version?

    Hi All,
    I installed SAP Netweaver ABAP 7.01 trail version on my PC but I don't know where to get the license key and how to install it. Please guide me.

    Hi
    Refer the following link for installation of license key.
    https://cw.sdn.sap.com/cw/docs/DOC-111105
    /people/mario.herger/blog/2010/01/20/new-community-developer-license-is-available
    Regards
    Vinodh

  • SAP Mobile Engine with SAP NetWeaver 7.0 Java Trial Version ?

    Hi, I would like to know if I can use the SAP Mobile Engine on the SAP NetWeaver 7.0 Java Trial Version that you can download form SDN or in other words if I can configure a test system with the SAP NetWeaver 7.0 ABAP SP12 and SAP NetWeaver 7.0 Java Trial Version ?
    I figure out that I can Develop some BAPI Wrappers on the ABAP Trial Stack but I can't enter on the SAP Mobile Engine in the JAVA stack, so is there any way ?
    Thanks.
    Matias.

    Hi Sivakumar, first of all thanks for your help
    So I have all of these this Trx. on my Netweaver Middleware which is a Trial Abap Version: (MEREP_MON, MEREP_PD, MEREP_SBUILDER) .... And I followed some Tutorial and did some BAPI WRAPPERS, so you are telling me that I don't Need any JAVA STACK?, at least just to test?, Becasue I need  to syncronize the PDA with the ABAP Trial server which is my Middleware also, ??  I have to Develop a Webdynpor for JAVA Applicaction in order to use an applicaction on my PDA (I would like to work OFFLINE applicactions, so that way How I can Upload the webdynpor App. to the PDA  and Sync them ?
    Thanks.

  • What J2EE engine for SAP NetWeaver 7.0 (2004s) Trial Version - Full Java Ed

    Hi experts,
    I am installing SAP NetWeaver 7.0 (2004s) Trial Version - Full Java Edition. For that
    1.what J2EE engine sholud be installed?
    2.where is it available?
    3.give Installation procedure for this.
    They have given it as trial version will it expire soon.
    Regards,
    karthik.

    hi karthi,
    This Section provides information on how to prepare the standard installation of the SAP System.
    The below mentioned steps are to be done before going for a installation.
    1.     Check the Resolution of the Screen - Screen resolution to be set to 1024 X 768.
    2.     Check for Screen Saver Settings - Screensaver to be set to OFF
    3.     Check for Installed OS and Service Pack.
    4.     Check for all the Hardware related details – Installation of drivers
    5.      Check for Data Throughput for Network Adaptors.
    Right Click the “Local Area Connection” -> Select Properties -> Select “File & Printer Sharing for Microsoft Networks” and click on Properties -> Click radio button for “Maximize throughput for Network Connection”
    go to SAP market place web site u got more information about this
    Regards,
    P.Manivannan.

  • Unistall Manually: SAP NetWeaver 7.0 (2004s) Trial Version

    Hello, I want to uninstall SAP NetWeaver 7.0 (2004s) Trial Version, but I do not have the software installers, how can I manually remove all the SAP instance?

    Hi
    Do these steps:
    Stop the SAP system. Stop the SAP Services.
    Stop SAPOSCOL service.
    Disable the SAP Services including saposcol.
    Delete the SAP profiles.
    Delete all the SAP Instance directory.
    Delete the SAP Services using the command "sc delete <service name>"
    Stop the database.
    Stop the database services.
    Drop the database.
    Using the Uninstaller of Database, uninstall the software.
    Then remove all the folders remaining in database and SAP folders.
    Else, if you are having the installation manager CD, then you can uninstall the SAP and Database.
    There is an option there, just check. ( I am not sure about this option as I have not worked on this)

  • SAP NetWeaver 7.0 (2004s) Trial Version - Full Java Edition includes EP

    hi all,
    i have install SAP NetWeaver 7.0 (2004s) Trial Version - Full Java Edition successed.
    i can browser http://localhost:50000,it's ok.
    but i can't enter EP,i try http://localhost:50100/irj/portal or http://localhost:50000/irj/portal
    how can i enter EP.
    SAP NetWeaver 7.0 (2004s) Trial Version - Full Java Edition includs EP??
    thank you!

    thank you first.
    http://localhost:50000/irj/portal 404 page not found error occur.
    http:///sap/monitoring/ComponentInfo
    as follow:
    Software Components 
    Vendor  Name  Version  Provider  Location  Applied 
    sap.com  SAP-JEE  7.00 SP9 (1000.7.00.9.0.20060827014500)  SAP AG  SAP AG  20061124152145 
    sap.com  CAF  7.00 SP9 (1000.7.00.9.0.20060825071023)  SAP AG  MAIN_APL70VAL_C  20061124155418 
    sap.com  JLOGVIEW  7.00 SP9 (1000.7.00.9.0.20060827014700)  SAP AG  SAP AG  20061124152145 
    sap.com  SAP-JEECOR  7.00 SP9 (1000.7.00.9.1.20060913120000)  SAP AG  SAP AG  20061124152140 
    sap.com  BASETABLES  7.00 SP9 (1000.7.00.9.0.20060827014300)  SAP AG  SAP AG  20061124152143 
    sap.com  SAP_JTECHF  7.00 SP9 (1000.7.00.9.0.20060827014600)  SAP AG  SAP AG  20061124152141 
    sap.com  SAP_JTECHS  7.00 SP9 (1000.7.00.9.0.20060827014700)  SAP AG  SAP AG  20061124153118 
    sap.com  KM-KW_JIKS  7.00 SP9 (1000.7.00.9.0.20060827014900)  SAP AG  SAP AG  20061124155455 
    sap.com  CORE-TOOLS  7.00 SP9 (1000.7.00.9.0.20060827014400)  SAP AG  SAP AG  20061124152141 
    sap.com  UMEADMIN  7.00 SP9 (1000.7.00.9.0.20060811133141)  SAP AG  MAIN_APL70VAL_C  20061124155518 
    sap.com  JSPM  7.00 SP9 (1000.7.00.9.2.20061124144800)  SAP AG  SAP AG  20061124154811 
    sap.com  LM-TOOLS  7.00 SP9 (1000.7.00.9.3.20061016113408)  SAP AG  MAIN_APL70P09_C  20061124154038 
    sap.com  ADSSAP  7.00 SP9 (1000.7.00.9.0.20060827015200)  SAP AG  SAP AG  20061124155032 
    sap.com  BI_MMR  7.00 SP9 (1000.7.00.9.0.20060826182000)  SAP AG  SAP AG  20061124152531 
    sap.com  BI_UDI  7.00 SP9 (1000.7.00.9.0.20060826185800)  SAP AG  SAP AG  20061124153222 
    sap.com  CAF-UM  7.00 SP9 (1000.7.00.9.0.20060811133139)  SAP AG  MAIN_APL70VAL_C  20061124155442 
    sap.com  DI_CBS  7.00 SP9 (1000.7.00.9.0.20060807071030)  SAP AG  MAIN_APL70VAL_C  20080326203252 
    sap.com  DI_CMS  7.00 SP9 (1000.7.00.9.0.20060807071027)  SAP AG  MAIN_APL70VAL_C  20080326203348 
    sap.com  DI_DTR  7.00 SP9 (1000.7.00.9.0.20060807071031)  SAP AG  MAIN_APL70VAL_C  20080326203357

  • Not able to download SAP NetWeaver 7.0 (2004s) Trial Version - Full Java Ed

    Hello people, I have been trying to download the SAP NetWeaver 7.0 (2004s) Trial Version - Full Java Edition.
    There are two files to download,
    - Developer Workplace 7.0 SP14SR3 Java Server Evaluation (4.214.608.965 bytes)
    - Developer Studio 7.0 SP14SR3 Java Server Evaluation (542.784.960 bytes)
    The first one (https://www.sdn.sap.com/downloads/netweaver/java/NW_JAVA_700SP14_SR3.rar) is giving me trouble, when I choose to download it, the next error appears:
    In FIREFOX:
    An error occurred while processing your request.
    Reference #172.51da5ce.1208786684.40fd9fe
    In Internet Explorer:
    HTTP 403 - Forbidden
    and in a download manager it says:
    Access denied.
    Has anybody been able to download this file?
    Thanks
    Juan Gonzalo Duque

    Hello,
    I´m having the same problem!!
    Did you solve the problem?
    Thanks,
    Luiz Henrique Mansano

  • SAP NetWeaver 7.0 (2004s) Trial Version Java download issue

    The SAP NetWeaver 7.0 (2004s) Trial Version - Full Java Edition does not download even with using Internet Download Manager.
    I have also tried downloading using other download managers but no luck.
    Those who have downloaded previously please try downloading again to confirm it there indeed is a  problem with the download.

    Hi Peter,
    Does it contain the following -
    - SAP NetWeaver Development Infrastructure
    - SAP NetWeaver Developer Studio
    - SAP NetWeaver Portal with PDK
    - Web Dynpro
    - Visual Composer
    - Content Management and Collaboration
    - TREX
    - SAP NetWeaver Business Intelligence Java SDK
    - SAP Interactive Forms by Adobe
    - Composite Application Framework
    - SAP NetWeaver Knowledge Management
    These are the components of the current version mentioned on SDN on [https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0576c7e-e306-2a10-37b8-a25d82e6f9d8|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0576c7e-e306-2a10-37b8-a25d82e6f9d8]
    Regards,
    Varun

  • SAP NetWeaver 7.02 Java Trial version

    Dear all,
    where can i download the "SAP NetWeaver 7.02 Java Trial version "???
    Thanks and best regards..

    Hi Alarmattacke,
    Trian version for SAP NetWeaver 7.02 Java Trial version not available, you need to download from service market place.
    Login to service market place http://service.sap.com with download authorization and go to the below path
    Software Downloads > Software Download Center > Browse our Download Catalog > SAP NetWeaver and complementary products > SAP NETWEAVER > SAP EHP2 FOR SAP NETWEAVER 7.0 > Installation > Select the operating system and database which you want to install.
    Best Regards
    Arun Jaiswal

Maybe you are looking for