How to register transport requests which is created outside CHaRM

Hi Experts
I have completed the ChaRM configuration in Solution Manager.
Now I want to include the open transport requests (which I have created outside of ChaRM) in ChaRM. Could you please guide me how I can include these open transports in ChaRM.
Thanks in advance
Regards
Venkat

Hi Prakhar
Thanks for your reply, as per SAP Note 1150426 I have executed the task in the maintenance cycle "Register transport request in tasklist", but the transport request is not added to the Change request.
Then I have tried to execute through sa38 there it's saying "Unable to find the task list / status of task list is not active". we are in ST - SAPKITL434
Could you please check and help me to resolve the issue
Thanks & Regards
Venkat

Similar Messages

How to reverse Transport requests from sand box to development client

Dear all,
I am doing some testing on Sand box, I made some transport requests from development to sandbox, which effected some settings in sandbox.
Now I want to reverse those transport request from sand box to development, unfortunately I didn't make any note of transport requests which I transported from Development to Sandbox.
Please educate me how to reverse transport requests from sand box to development.
your suggestions are highly appreciated
thank you
Venu Gopal

There is no reverse, you have to create a new transport with the original settings.
Programs keep track of their versions and are easier to pull a previous version, configuration can be tougher, open all the folders in SE10 to see if you can determine the configuration changes.

Released the Transport Request which is in Local Change Request

Hi,
Actually without knowing I have released transport requests which are under Local Change Request.Due to this they are not available for importing in Quality system.My Package is also there in one of those Requests.Now please guide me how to recover these requests.
Regards
Karthik

Hello Karthik
The easiest way should be to copy the object list of your local request to a new (transportable) workbench request.
However, the system might tell you that your objects can only be put into a local request.
In this case you need to find out why your objects are not (yet) transportable.
Usually there are two reasons for local request:
1.) The request does not have a target system -> check the request header and enter the correct target system (if possible)
2.) Your package has an inappropriate transport layer assigned -> change the transport layer
Regards
Uwe

How delete the Transport request in Development system

Hi Guys,
I have created one Transport request and released (not moved to other system), now I don't want that request to transport to other systems.
I need to delete the Transport request, could you please suggest how to delete the Transport request.
Please provide the steps to delete the Transport request.
Thanks,
Gourisankar.

hi Gaurishanker
check this thread
How to delete transport request if child request was released
hope it helps you.
thanks
Sachin

How to change transport request

hi,
i have accidentally select the wrong transport request number when create a report at SE38, which i dont want and i would want to create a new request number .
but i were unable to do so. can any one help me on this? thanks

If you have assigned the report to a wrong request.
Go to SE10, open the request, then the task, place the cursor on the report name (the report which you do not wnt in that request) and press the delete button on the task bar. This will delete only the entry of the report name from the request. the remaining objects in the request remain the same.
Now open SE38, with the new report and press save, this will prompt for a transport request, create a new one and save it
Please do not open multiple threads for teh same query.
Regards
Gopi

Unable to delete Transport Request which contain locked objects

Hi all,
I need to delete some unusable transport requests but as they contain locked objects, it's not possible to delete them. Release operation is just allowed. After releasing these transport requests, I can not find them any more in queue. Please help to find these transport requests which are released and also provide a solution to delete instead of releasing them.
Thanks in advance,
Sanaz.

Hi,
Thank you for the reply.
1. What do you mean by transport request , Shipment Request, Shipment Order or Tour.
A. I mean requests which can be transported between SAP Systems using TMS (Transport Management System).
2. What are the objects which has been locked and due to that you are facing this problem.
A. There are diffrent object types. For examle some customizing have booen done or SAP Note correction has been implemented, ... Therefore some objects have been locked due to these operations
3. Let's say if it's an freight Unit, then Pls confirm that System dump / error is not the cause for this.
A. I have no idea about "Freight Unit".
Thanks,
Sanaz.

Remove unnecessary transport requests which are 7 days old

Hi All,
I would like to delete all the un-necessary transport requests which are displayed in STMS which are more than 7 days old.
But, the import log should be available whenever i need to verify.
Is there any script which can do this?
Thanks
Vijay

Hi,
I do have a similiar situation, I would like to write a script to remove transports that have successfully transported and are over 7 days old. In STMS currently we have a list of every transport that has ever been sent and there is no need. Note that via SE10 we still want to see transport history even for old transports just remove the old ones from STMS. Hopefully I feel some script does this job and no idea on this scripts.
Can someone throw light on this and help me out.
Thanks & Regards,
Bharadwaj.

Transport Request Not getting created automatically

Dear Sir,
We are facing a problem related to , Transport Request not getting created automatically during the SPRO change activities . We have to manually create the Transport Request and then changes need to be included in the request individually on the manual basis .
However earlier , we had no such problem and Transport Request were getting created perfactly .
We request you to kindly help us on this issue pl .
Rgds
Sonia Agarwal

Hi Sonia,
This is purely because of the client settings. Your client settings are in such a way that the cghanges are not getting captured. As mentioned by Naveed, check to see the client settings and change the settings if needed.
FYI: The SandBox clients will have the client settings as in ur system now.
Regards,
Varadharajan M

How to track Transport request released

hi Experts,
How to track Transport request released from one development system (D01)to another
development (D02).
is there any way we get know .
Amit

Hi,
       From SE09 & SE10 you track the transport requests, and even you can find the transport request details from the following database tables.
E070                             Change & Transport System: Header of Requests/Tasks
E070A                            Change & Transport System: Attributes of a Request
E070CREATE                       Change & Transport System: Creation Date of Request
E070DEP                          Change & Transport System: Dependencies of Requests
E071                             Change & Transport System: Object Entries of Requests/Tasks
E071C                            Change & Transport System: Client-Specific Lock Flag
E071E                            Lang. Transport: Positive List for Generic Object Selection
E071K                            Change & Transport System: Key Entries of Requests/Tasks
E071KC                           Change & Transport System: Key Entries of Requests/Tasks
E071KF                           Change & Transport System: Nametab Info. on (CHAR)Key Fields
E071KFINI                        Change & Transport System: Nametab Info. on (CHAR)Key Fields
E071K_30                         Change & Transport System: Key Entries of Requests/Tasks
E07T                             Change & Transport System: Short Texts for Requests/Tasks

How to find the transport request which was released to Quality

Hi Friends,
Could anyone please let me know, how to find the transport request that was already released from Development to Quality?
there was some change in customization took place. I could find the user (through change log) who made these changes, however I could not find the transport request number he has already released. I did give his user name in SE10 and checked the released checkbox and did click transports to see them, however I found nothing. A message got displayed on the screen: Cross-system information for user xxx. I can't ask the Basis people about it, as its not yet been trasnported to Productive.
Is this the correct way to see the transport request number? Is there any other way to find the number. I can give the tentative dates when the change was released.
This post might already posted before, I did some search, could not find the exact info what I am looking for. Would appreaciate if anyone could give the step by step method to find it.
Thanks in advance.
BR,
Sats.

Ram,
let me tell you the the situation in a better way.
When I see se10 with my user id I could see all the transport requests that I have released. However, now when I enter my colleague user id who did these changes (he is on vacation, otherwise I could simply ask him the transport number), nothing is shown on the page. in simple words the page is completely blank. Initially I thought it is because of some authorizations, but I can get the transport request numbers that are released by another user.
the info what I have right now are:
1. I knew the user name who did these chages
2. I knew the date when it was changed.
I just need the Transport Request number I mean which starts with DEVXXXXXXX.
As per your solution --> If you have any idea when the reques was relase you can select the request and click on goto-transport logs. This way you can find out the request. --> I knew the date when it was released, but didnt understand, the bold and underlined sentense in your answer.. select on which request? as I said, the page was blank after I enter his user id and activate it.. May be I did not understnd your solution properly. Could you please simplify it.
Thanks a bunch in advance
Sats.

How to assign transport request for Dynamic selection in SE36

Hi Friends,
Please guide me how to transport or assign a request for the changes made in BRF selecion view.
I have assigned and added BKPF-XREF1_HD field for FB03 transaction. Its working fine as per user requirement.
I am facing probelm to assing a transport request for that. I didn't find any transport menu in se36.
So please provide me how to assign a TR which need to import into Production client.
If I have to assign or create a program (standard), then please provide me the program name.
Please reply.
Thanks & Regards
Sankar.
Edited by: sankar babu on Jul 29, 2010 12:27 PM

Moderator message - Cross post locked
Total Questions: 283 (131 unresolved)
Please also close your old posts and assign po1nts to helpful answers.
Rob
Edited by: Rob Burbank on Jul 29, 2010 9:50 AM

Error within General Task: Register transport request in task list

Dear all,
I would like to register transports into a task list. When I try to do so I get the following error:
Error RFC destination SPROJECT_GET_SMI_DATA_R: Projekt: ZCHARM_DQ
Message no. /TMWFLOW/TASKLIST191
Some one got an idea where the problem might be?
Any help would be much appreciated.
Best regards
Daniel

Hi Daniel,
This error is reported in SDN blog /people/dolores.correa/blog/2009/07/22/change-request-management-scenario-usual-questions-and-known-errors
in point 21
21. Missing authorization for READ RFC connections
Our default authorizations for remote READ RFC users (created in SMSY) do not allow us to read transport requests information. But READ RFC users are used extensively in Charm to get those information. It is a bug in SMSY which has not been fixed by now. So currently for such kind of messages we have to ask our customer to manually add appropriate authorizations (e.g. profile S_TMW_CREATE) to those READ RFC users.
- Open transport requests are not marked as red when release them from task list.
Note 1279558 - Red Question Mark Icon Missing from Charm Transport Release
- "Error RFC destination SPROJECT_GET_SMI_DATA_R" when register outside transport requests into Charm.
Please assign enough authorizations to all those READ RFC users on their DEV system (including client 000).
- Cannot complete maintenance cycle due to "Error RFC destination /TMWFLOW/TL_COMPL_CHK_TR_WO_TL"
Please assign enough authorizations to all those READ RFC users on their DEV system (including client 000).
- Transport request information is missing in the result of Charm Reporting.
Please assign enough authorizations to all those READ RFC users on their DEV system (including client 000). And after that they should re-execute background job SM:TMWFLOW_CMSSYSCOL to update those information on Solution Manager system again.
Hope this helps,
Dolores

Want to crate a bc set with transport request,which has deleted records

Hi
I need a help in BC sets regarding records deletion.
I want to create a BC sets with the transport, which has one deleted records from the table
I have 30 records in table. I have deleted one record and created transport for the same.
When I try to create BC sets with the above transport. It is not showing records, which is in Transport request.
Could you please help me on this How can we create BC sets with deleted records.
Thanks and Regards,
Venkat

Hai,
Please check the following link.....
http://help.sap.com/saphelp_nw70/helpdata/en/a6/c3a768465411d395c600a0c930dcc1/frameset.htm
Regards,
Yoganand.V

How to release transport request

Hi,
Good Morning!!!!!!!!!!!!!!!
How to realease the transport request?,in that one rquest is header in that one one more task number is there.
can u help me,this is very urgent,
please send step by step procedure.
very urgent.please
Yours
srilatha

Hi,
1) first u r collected objects should be in transportable package(not in $TMP)
then u check in SE09 which are the objects u r collected those things are avilable in that request or not if not there once again u should collect before transport and check that request if any locks are there if there release in SE03
2) now in SE09 first u relase the task(subordinated one) then release the request.and u can see that request in imported server in tcode of STMS.
Thnaks & Regards
sathish

How to install transport request files into the SAP system

Hi Experts,
I want to install transport request files into my SAP source and target system . I am from BW/BI background so can anyone help me out with the step by step procedure for the above installation.
Thanks in advance
Regards
Shiva

Hi,
What I understand is, you want to transport request from one server to another.
for example, Development to Qualtiy or Quality to Production.
For this your transport system must be configured. Please search help.sap.com or google for "How to configure Transport System (STMS)".
If you want to copy transport request from one system to another system which is not in your landscape, you need to physically move/copy transport request (cofile and datafile) to the target system in /usr/sap/trans/cofiles and /usr/sap/trans/data
Then import that request using SCC1.
You can alos perform TEST import for result.
Regards.
Rajesh Narkhede

How to register transport requests which is created outside CHaRM

Similar Messages

Maybe you are looking for