How to relate IDOC generated in sap through ALE from legacy system
Hi all,
can any one tell me how can relate an idoc generated in SAP with the new idoc generated in a legacy system. I mean how could I identify, which idoc is generated for a particular idoc in legacy system and vice versa.
Thanks,
Nilanjana
Thanks Suhas but when i am getting error message related to partnr profile when pressing this 'TRACE IDOC' button even with idoc in status 53.
Edited by: nilanjana sinha on Nov 11, 2011 8:20 AM
Similar Messages
-
IDOC/BAPI for Production order creation from Legacy system
Hi all
We are using an interface to create Production orders from legacy to SAP. Would you recommend an IDOC or a BAPI to create Production orders. If IDOC or BAPI then could you please mention which one?
thanks a bunchHi John,
For your purposes, please use BAPI for production order creation from legacy system. There is no standard inbound IDoc available to use. SAP has an IDoc for outbound interface only (message type LOIPRO).
If there is an inbound IDoc available, I would recommend to use an IDoc.
IDoc technology has excellent error handling and will allow you to reprocess an error (if any).
BAPI is also good approach to use and fast in term of processing.
For BAPI approach, you can use BAPI BAPI_PRODORD_CREATE.
Hope this will help.
Regards,
Ferry Lianto -
Upload Opening balance of G/L accounts from legacy system to SAP, and also
Hi Gurus,
How to upload Opening balance of G/L accounts from legacy system to SAP, and also Vendor and Customer balance.
My Doubt is when you upload the customer balance and vendor balance will it effect the sundry debtor account and sundry creditor account if not the how will the sundry debtor account and sundry creditor account will be posted with the balance. Please send me the general entry passed for posting the same.
What I understood is that when we are uploading the customer and vendor balances through LSMW, no entry will be passed and it will update the customer and vendor sub ledger in FBL1N and FBL5N but it will not affect the sundry debtor account and sundry creditor account.
To give effect to sundry debtor account and sundry creditor account we need to manually pass a journal entry as follows.
1) Sundry debtors account A/c -
DR
TO clearing account A/c
2) clearing account A/c -
dr
Sundry creditor account A/c
Please let me know whether iam correct
Also please tell me what will be the scenario for uploading of the assets balances through LSMW.
THANKS AND REGARDS
MVHi,
When you uploading any data from legacy system to sap normally we will be using LSMW or BDC,thru this we will be uploading master data like G/L,vendor,Customer and asset master these are the some examples and we will upload transaction data also that is P&L Account and Balance sheet.When we do uploading data thru LSMW system will update all the values of vendor,customer and asset values as well as subsidary ledger also.No need to do manully.
Regards,
satya,
FICO -
Upload data from legacy system to SAP through ALE IDOC
Hello All,
I have a requirement where i need to upload the data from legacy system to SAP. So i am using ALE IDOC.
In my requirement i need to extend the Standard IDOC. I have extended the IDOC and even found the exit for the updation of the extended fields to SAP. My data would be be placed in the application server.
Can anybody tell me how to retrieve the data and update in the tables for the extended fields.
Could you please provide a sample program for retrieving data for IDOC.
ThanksHi,
You can find the sample code in the following link.
Re: calling idoc_input_creditor
Regards
Sajid -
How to UNLOCK queues when data is migrated from legacy system to SAP syste
Hi All,
I need some help regarding queues (SMQ2). XI is been used to migrate data from legacy system to SAP system. Sometimes the queue is getting locked. Once the queue is unlocked then the message is processed correctly. So, the incoming queues must be "unlocked" routinely so that they can process through the system. There is a standard report RSQIWKEX available that can be scheduled in SAP system to automatically unlock the queues. Before using the standard report RSDIWKEX, we made sure that we have added parameter MONITOR QRFC_RESTART_ALLOWED set to "1" in Integration Engine specific configuration (TCODE SXMB_ADM).We are unable to analyze the reason for locking of queues and how to avoid it. If the locking of the queues can not be avoided, is there any way to unlock the queues? We tried executing this report but were not successful in unlocking the queues. Please guide us in solving this issue. It would be really helpful if you can give us a direction in solving this problem.
Thanks in Advance,
Shwetha.Hi,
Just check if the Queues are registered in Transaction SMQR.
If its not, then register the Queue by pressing 'Register' Button
Sharif. -
Data Migration from Legacy system to ECC systems via ETL through SAP PI
Hi All,
I wanted to know if we can migrate the data from Legacy systems to ECC systems via PI.
What I understand is there is ETL tool is used to extract the data from legacy system, and what client is looking to load that data via PI?
Can we do that ? I am concerned because this will involve mass data?
If I have to use PI , I see option of PROXY / IDOC /FILE as receiver in ECC system (take the data from ETL)?
Can somebody has done this earlier , please share the approach.
Thanks,
Pushkar PatelHi ,
I require few details from you.
1. What ETL tool you are using, If Informatica, it already have PowerConnect to connect to SAP. So you can create source and Target Structure and also you can use RFC's to send data to R/3. Else, for other ETL tools, can you prepare RFC's or any other way to send data to R/3. let me know the tool.
2. Does R/3 contains the master data tables? If yes, then try to use LSMW for Mass upload of data to tables.
If your client don't want to use either of these options please elaborate, what is the case.
Regards
Aashish Sinha -
How to upload the data from legacy system database to SAP data base
Hi.
We are doing analysis of Legacy system and which needs to be converted to SAP system i.e. SAP implementation.
I just want to know , how we migrate the existing whole data( from legacy system) into SAP system.
and which method is the best method to use data migration from legacy to SAP system if data legacy data amount is huge.
Please suggest me.
Thanks.Hi
We can either use the BDC or BAPI or LSMW or Direct Input techiniques for the data transfers.
The combination of both Session and Call transaction can be used to achieve this that includes the error handling also. This invloves the screen interaction.
These days, BAPIs are used to overvome some upgrade problems. For easy upgradation, we cna go for BAPIs. Here ther is no screen intercation.
LSMW mainly used for master data transfers using some standrad programs.
As per your client or company desicions we can choose any of them.
Please refer to these links for more understanding -
BDC Vs LSMW -
BDC VS LSMW
BDC Vs BAPI -
BDC VS LSMW
Thanks & Regards,
Chandralekha. -
How to transfer Cats data from legacy system to SAP System
Hi,
I need to export data to CATS from Legacy system.What is the procedure for that?
How do I define field?
Please help it is urgent.
Thanks,
KavitaHi Kavita,
Check the link below.
http://sap-img.com/sap-data-migration.htm
Reward points if it helps.
Regards
Karan -
Migrate all Open Sales Orders From Legacy System (SAP) To SAP System using
Hi Experts,
I've to Migrate all Open Sales Orders From Legacy System (SAP) To SAP System using Business Objects with a new SALES ORDER DOCUMENT NUMBER referencing the older one.
I'll get all the required data with field in an excel file.
Does any standard transaction exist for it ? Or how to go ahead with it ?
Thanks and regards,
Jyoti ShankarHi
If you are checking for CREATE option then Sales Doc Type
For more Info goto SWO1 transaction -> BUS2032 --> DIsplay --> Execute --> There SELECT the method which you want to perform... There you can fine the MANDATORY parameters also....
Or in DISPLAY mode PLACE Cursor on the Required Method and CLick the PARAMETERS button on toolbar...
That will show the MANDATORY parameters...
Reward if helpful....
Message was edited by:
Enter the Dragon -
How to get Acknowledgement from legacy system in an Asynchronous scenario?
Hello Experts,
My current scenario is to send an invoice from ECC --> ABAP proxy --> PI --> webservice --> Legacy system & I need acknowledgement back to ECC system from legacy system. How SAP XI acknowledgements work in asynchronous scenarios?
Please guide.
Thanks & Regards,
Nidhi KukrejaHi nidhi,
please check following link
http://help.sap.com/saphelp_nw04/helpdata/EN/44/932e8896b610bbe10000000a422035/frameset.htm
Also check this one.
http://help.sap.com/saphelp_nw04/helpdata/EN/f4/8620c6b58c422c960c53f3ed71b432/frameset.htm
hope this helps..
- Deepak. -
Migrating Open Sales Order From Legacy System (SAP) To SAP System
Hi Experts,
I've to Migrate all Open Sales Orders From Legacy System (SAP) To SAP System using Business Objects with a new SALES ORDER DOCUMENT NUMBER referencing the older one.
I'll get all the required data with field in an excel file.
Does any standard transaction exist for it ? Or how to go ahead with it ?
Thanks and regards,
Jyoti Shankarhi jyothi ,
there are lot of ways of doing it depending on data upload volume it will be decided .
1) thru abap bdc program which directly uses XL sheet data and creates SO using bapi/FMs.
2) using scat.functional consultant should be good enough to use this.
3)lsmw-laborious procedure but achievable.
reward if helps !!!!! -
Transfer of GL a/cs manually from legacy system to SAP
How do you transfer GL a/cs manually from Legacy system to SAP, what offset a/c would you use. Also how would you open AR and AP transactions manually in SAP. Please help my email id is [email protected]
ThanksHi,
U can open one opening balance account.
Separate u r trial balance in following
gl account use key 40/5O GIVE NET EFECT TO OP BAL ACCT
Asset- use key 70 -75 GIVE NET EFECT TO OP BAL ACCT
Customer use key 01/11 GIVE NET EFECT TO OP BAL ACCT
Vendor use key 21/31 GIVE NET EFECT TO OP BAL ACCT
Material accts - this will be loaded thru mm and bal will go to initail entry acct revert one enrty from that to OP BAL ACCT
now u have uploaded all tb hence u r opening balance should be nil.
Warm Regards -
BO DI for extracting data from legacy system to SAP BW 7.0
Hi,
Has anyone worked on scenario where BO Data Integrator is being used as ETL tool for extracting data from legacy systems to SAP BW 7.0 ?
Please share your experience on such a landscpae or related documents any of you had come across.
Regards,
PriteshThere are couple of them - Lawson ERP, Kalido, AS/400. ECC 5.0 might be there as well.
Regards,
Pritesh.
Edited by: pritesh prakash on Jun 14, 2010 2:00 PM -
Uploading data from Legacy System to SAP (In PS Module)
While Implementing Project system Module, Whether LSMW is applicable for uploading data from Legacy sytem. If not, then what is the method used for uploading the data from Legacy sytsem to SAP
For creating/uploading the master data from legacy system to SAP we either use below options
1. BDC (recording)
2. BAPI
3. ALE iDoc.
I would sugguest you to use BAPI and there's already this post which explains few details about the BAPI:
Problems with BAPI_PROJECT_MAINTAIN
Regards
Sreenivas -
Loan upload from legacy system to SAP
Hi Experts,
I have a query regarding uploading Loan from legacy system to SAP.
We are implementing SAP HR for a client going live by 1st jun 2011. The scenario is the client has few employees who have taken loan for various reason, i have configured the same through SPRO....now my query is when i ask the client to provide me with loan data:
1. We are running payroll from 1st April 11, should i ask the client to give me the loan amount as the current standing loan amount
2. when i am uploading loan in 0045, should i put something in third tab payment
Thanks for your support.
Regards,
JyotiHi,
This third tab basically create a record for info type 0078(Loan Payments). If you don't have any records in 3rd tab/0078, system will not start loan recovery in payroll.
Find the response for 2 scenarios-
Scenario 1 & Scenario 2:
maintain these fields in the table control of 3rd tab-
Date(GT_PAYM-ZAHLD) - 01.04.2011....Basically payments and repayments starts date also used for interest calculation
PmntTyp(GT_PAYM-ZAHLA) - 100(Loan payment (external)) ....Contains information on the direction and method of payment. Also control wage type generation in loan PCR and Functions
Amount(GT_PAYM-BETRG) - Balance Amount ....The total of payment or repayment amounts which you enter here, may not exceed the amount that you have entered in the Approved loan amount field on the Basic data tab page ....For your both of the scenariof, this amount will be same.
Regards.
Suman
Edited by: suman poddar on May 22, 2011 10:28 AM
Maybe you are looking for
-
MacBook Pro refusing to startup no matter what I do
I have a MacBook Pro - as per specs below - and it has decided not to complete a startup. The way it happened was I restarted my computer to boot up into Windows then later on I used the Boot Camp system tray icon to restart into OS X, or at least th
-
Creating and verifying signature and certification
Hi experts, we are developing a PDF based supply chain process to collect some chemical data. Process description: - Company creates an interactive form - Company sends the form to the business partner - Business partner fills out the form - Business
-
Using the fireTableRowsDeleted Event
hii all , :( I had develope a small application where i am using the JTable and also sorter for filtering the content , In Jtable i am using the AbstractTableModel , and on a click of the checkbox in jTable i delete the row for which i had written th
-
Authentification with Active Directory
Hi all, i'm on a new project EP 6. My customer want to "integrate" EP 6 in his Intranet ; when the user clicks on a link located in the Intranet one must arrive in EP 6. The authentification must be transparent, my customer want to authenficate the u
-
Error while loading customer master data through Idoc (DEBMAS) from BODS
Hi All, I am trying to load customer master data from BODS to SAP ECC through IDOC(DEBMAS). The jobs run successfully but IDOC is not getting posted. Please find the error below. I checked in TSKD table the entry 0 is present. Please help me to resol