How to remove a name from the pop up screen when you type in a letter

I stopped in the apple store today and stumped the genius bar !!!!!!
I am so proud.
I want to know how to remove e-mail address's that pop up when you hit a alpha key.
These are address's that are NOT in my address book or anywhere on my computer.
They would be a one time e-mail that I sent over the last 3 years or so.
I do not retain old e-mails either which would trigger keeping the address alive.
Thanks,
Greg

In Mail, you can also select a popped-up name that you don't want to retain, click the triangle that appears when you move your cursor to the area just after your name, and select "Remove from Previous Recipients List" from the dropdown menu. This choice will not appear if the name is in your Address Book.

Similar Messages

  • How to remove character names from the drop down

    I was writing off screen dialogue. Normally I would write  FRED (O.S.) but when I did this, Story treats it as a new character - different dot in the outline.  In trying to correct it I now have four different instances of the FRED character that pop up in the character drop down list. How can I make the ones I don't want go away?  How do I indicate a character is off screen without creating a new character?

    I hadn't noticed this as I use a (VO) tag under the character name rather than (OS) but this is a good point.  I agree, simply ignoring anything in parantheticals is a good way to go on this one.  It all goes to the same name then.  Good ideas.
    Not sure about all the formal formatting issues as I'm really an experimental filmmaker so I don;t get that involved int he formaities but can't you also simply write these as follows:
                                            JUDGE LAWLESS
                                                      (VO)
                             Why did Jesse go and shoot that old goat anyway?
    To represent his voice being heard over the scene.  Or is this indicitave of the person being physically on camera for the scene but overheard as an inner dialogue?
    Sean

  • How do I delete names from the drop down list when I login to gmail and facebook?

    When I login to gmail and facebook several login names used in the past show up in a drop down list. I want to remove some of these names. How do I do that?

    On Mac you need to use Shift+Delete
    *http://kb.mozillazine.org/Deleting_autocomplete_entries
    *Click the (empty) input field on the web page to open the drop down list
    *Highlight an entry in the drop down list
    *Press the Delete key (on Mac: Shift+Delete) to remove it.
    *Firefox > Preferences > Security: Passwords: "Saved Passwords" > "Show Passwords"
    *https://support.mozilla.com/kb/make-firefox-remember-usernames-and-passwords

  • How to remove available downloads from the list

    how to remove available downloads from the list without it resuming when i open itunes or check for available downloads?

    There is not a way to remove them from the list.  Just let them download, and then delete them from your library when they are done.

  • How to remove SD Card from the Card Reader slot - Satellite A100?

    Hi,
    Is there anyone to help me? I inserted a 64 MB SD card in the card reader slot of my Toshiba A100 model. It's the first time i have inserted the card. The card is inside the slot. I can not take it out! I don't have any idea how to remove the card from the card reader slot. I can see the contents of my SD card, can open the files too. But how to remove it out from the slot. Please help me giving your idea to remove the card out from the slot.
    Arjun

    Hi
    In my knowledge the SD card slot doesnt has a any additional helps like the PCMCIA slot to remove the card.
    You have to remove it simply. Try to grab the card and move it out. You can try to use the pair of tweezers. Maybe it helps

  • How to remove unused objects from the webcatalog In OBIEE11g

    Hi,
    I want to delete unused objects from obiee11g catalog, i know in obiee10g it's working fine (i.e: we can do it via manage catalog then delete the unused objects) is there any way to do it automatically like RPD utility --->removing unused objects from Physical layer in RPD
    fyi: I don't want to delete manualy. i need somethink like button/link to find unused objects(report,filter,folder..etc) from my obiee11g catalog.
    Thanks
    Deva
    Edited by: Devarasu on Nov 29, 2011 12:06 PM
    Edited by: Devarasu on Nov 29, 2011 3:15 PM

    Hi,
    Checked with Oracle Support team and confirmed below points
    --> incorporated into the Current product and consider as BUG it may resolve future release
    --> Currently there isnt any automatic method to remove the unused objects like reports, filters,folder etc from catalog.
    Treated as Bug
    Bug 13440888 - AUTOMATICALLY REMOVE OF UNUSED CATALOG OBJECTS FROM WEBCATALOG
    FYI:
    SR 3-4984291131: How to remove unused objects from the webcatalog in obiee11g
    Thanks
    Deva

  • HT2500 Does anyone know how to remove a group from the address panel in mail?

    Does anyone know how to remove a group from the address panel in mail?

    I haven't seen too many questions like this on this forum.  Did you also try the photoshop forums?

  • Removing a user name from the Skype login screen o...

    Hi, I want to remove a username from the skype login screen on a Samsung Smart TV, but haven't found any way of doing it.  I managed to remove a username on a laptop PC by looking up the Skype help but that method doesn't seem to work on the Smart TV - anyone got any suggestions? Thanks

    Hi
    There is a way of doing this, but it involves resetting ALL of the smarthub back it's default state - which would mean that you would have re-install any other apps that you have downloaded. 
    To do this, go to the SMART HUB menu and press the TOOLS button on the remote. WHen the menu appears, select the SETTINGS option and then RESET. You'll need to enter your PIN (if set) before you can reset the SMART HUB back to its factory default state. When it's completed, Smart Hub will update itself next time you go back to it, and you'll notice that all of the Skype Names are now removed from the sign in screen. 

  • Siri says she can't read my email from the iphone5s lock screen when I'm using the standard headphones, but I could do that on 4s. How can I get my 5s to do that?

    Siri says she can't read my email from the iphone5s lock screen when I'm using the standard headphones, but I could do that on 4s. How can I get my 5s to do that?

    Hi Liz,
    Sorry to hear you are having a similar problem.  Last night I went to the tool bar at the top of iphoto, clicked on "File",  then clicked "Browse Backups" in the drop down menu.    I have an external hard drive that is set up to Time Machine.   The Browse Backups  opened the iphoto pages in the Time Machine.  I selected a date one day ahead of the day I performed the now infamous update, and it showed my iphoto library as it had existed that day.   I then clicked  "Restore Library" at the bottom right corner of the Time Machine screen.   Roughly 2 hours later my iphoto was back to normal.   When I opened iphoto there was a message saying I need to upgrade my program to be compatible with the new version of iphoto(version 9.2.1).  I clicked "Upgrade" and within seconds it had done whatever upgrading it needed to do. 
    The only glitch in the restoration was that it restored the library as it appeared last week, so I no longer had photos I had imported this past weekend.   I simply went back to the Browse Backups in the drop down menu,  when Time Machine opened I selected the page showing my pictures from this weekend and again said to Restore Library.   Roughly 45 minutes later the library was restored including the most recent photos.  
    I am now a happy camper. 
    I don't know if any of this will be of help to you because your email says you are having trouble with photos imported after the upgrade was performed.   Have you had any pop up notices when you first open iphoto,  that tell you you need an upgrade to be compatible with the new iphoto?     If so have you clicked "upgrade"? 
    Good luck Liz,  if you have Time Machine running as a back up to your library, maybe you wil be able to get help there, by following my instructions above.   Otherwise,   good luck with your investigations.   I'd be interested in hearing how you make out.
    Karen

  • TS2755 Is there a fix to deleting already deleted address book contact, from messages search? i.e. when you type in say letter c in messages search, all contact with a c, past already deleted and current all appear?  How do you make the old deleted ones a

    Is there a fix to deleting already deleted address book contact, from messages search? i.e. when you type in say letter c in messages search, all contact with a c, past already deleted and current all appear?  How do you make the old deleted ones appear?

    only way is to restore the phone as new.  OR wait until IOS 7 comes out in the fall.

  • Running iTunes 11.0.3 64bit Windows 7. The "join Tracks" line has disappeared from the box that opens when you click "options" after inserting a CD. Only 2 lines show up: "Get track names" and "Submit CD Track names". Where did "Join Tracks" go?

    Running iTunes 11.0.3 64bit Windows 7. The "join Tracks" line has disappeared from the box that opens when you click "options" after inserting a CD. Only 2 lines show up: "Get track names" and "Submit CD Track names". Where did "Join Tracks" go?

    i have the same problem no radio stations at all bit shabby hate technolgy now adays

  • How do you change the I'd on the log in screen when you want to update your apps and the I'd  is wrong

    How do you change the I'd on the log in screen when you want to update your apps and the I'd  is wrong and the password is also wrong. HELP

    Go to Settings>Store>Apple ID. Tap on the ID and sign out. Then tap on "sign in" and sign in with the correct account.

  • How to remove database name from SQL query

    We have an MS SQL server with several databases that are of the same schema but have different data.  We do this for testing different environments.  We are using Crystal reports for the first time and we are having trouble changing the database location in the designer.  If update the data source location to the same database server, but different database name, the data still comes from the original database used when creating the report.  We look at the SQL query and it contains the database name and does not change when updating the data source.  Therefore the data always comes from the database used when originally creating the report.
    How can I remove the database name from the SQL query so the proper database is used when testing the report?

    Hi C F
    Please ensure you have followed the procedure mentioned below:
    In Crystal Reports, there are two ways to set the location of the data source your report points to, depending on your connection type.
    For ODBC and Native Connections:
    1. On the 'Database' menu, click 'Set Datasource Location'.
    2. In the 'Current Data Source' section, click the data source to be changed. You must click each individual table in the data source one by one. If the data source is a stored procedure you will not see individual tables.
    NOTE     In Crystal Reports 10, XIR1, and XIR2, if you are mapping from a data source such as a stored procedure where the report designer can not determine which fields should be mapped automatically, you will see a 'Mapping' dialog box where you can manually map fields, as in the procedure cited above.
    3. In the 'Replace with' section, click the data source you want the report to use.
    4. Click 'Update'.
    5. Close the 'Set Datasource Location' window.
    The report now points to the new location.
    For Native Connections Only:
    1. On the 'Database' menu, click 'Set Datasource Location'.
    2. In the 'Current Data Source' section, click 'Properties' to expand it and right-click 'Database Name: <path to database>'.
    3. Click 'Edit' and then type the path to the
    new data source location.
    4. Close the 'Set Datasource Location' window.
    The report now points to the new location.
    Regards
    Girish

  • How to remove characters/lines from the beginning of an InputStream

    Hi,
    I have a program which receives several InputStreams. From each of these streams I have to remove 2 lines from the beginning. After the lines are removed, all the streams are combined to one with SequenceInputStream and read in one chunk. Is there an easy/simple way of doing this?
    One option I thought would be to read the char by char until 2 end of line chars have been detected and then read the rest of the data to a buffer. And the create a ByteArrayInputStream out of this buffer. Problem with this approach is, that the amount of data can be large, so putting all the data in to memory might cause problems.
    Another option is to use BufferredInputStream and use the readline() method twice to get rid of the lines that are not needed. After this I would write the data to some output stream, which is then converted back to input stream. Propably would work, but sound too much of work for a simple thing like this. There has to be better way.
    To make it simple, what I need is a method that looks like the following, or something similar
    *  Removes n number of lines from the beginning of a InputStream.
    *  @param is InputStream where the lines are removed
    *  @param numberOfLines int value to indicate how many lines whould be removed
    *  @return InputStream where lines have been removed.
    public InputStream removeLines(InputStream is, numberOfLines);Thanks.

    Here's the code, feel free to use it. Comments are also welcome.
    public InputStream removeLinesFromTheBeginning(InputStream is, int numberOfLines) throws IOException
              char c = 'c';
              int i = 0;
              for(int n = 0 ; n < numberOfLines ; n++)
                   do
                        c = (char)is.read();
                        System.out.print(c);
                        if(c == (char)-1)     // end of stream reached before any newline characters were found.
                             return null;
                        i++;
                   while(c != '\n');
                   System.out.println();
                   System.out.println("Characters removed:" + i);
                   System.out.println("n: " + n);
                   i = 0;
              return is;
         }Edited by: dave_spaghetti on Jun 16, 2009 5:42 AM
    Fixed a bug.

  • HT2905 How to remove duplicate songs from the iPhone when the duplicates are not listed in the iTunes library on the computer.

    How can I remove duplicate songs from the iPhone4. The duplicates are not listed in the computer iTunes library.

    The simplest thing may be to back-up and then restore the iPhone. If you don't fancy that then remove all media that is currently synced to it, then double check and manually remove any media that remains on the device, before reselecting your sync options.
    If you've been manually managing the device and your library doesn't contain copies of all your media then see Recover your iTunes library from your iPod or iOS device.
    tt2

Maybe you are looking for