How to remove a partition of my hard drive

I have an old 2007 HP Pavilian DV6000 series with Windows Vista. At some point, one of my husbands friends had the bright idea to partition the hard drive and put Linux (Ubuntu) operating system on my laptop. I haven't used this laptop in a few years now because once he did that the laptop has been screwy ever since. I want to remove that OS and remove that partition. I don't have a recovery disc to do a factory reset, I've tried that and I've tried restoring to early point and nothing is working. So how can I un partition that part of the hard drive and remove that horrible OS?? Vista is still on there and I can still access Windows, but I just want my computer back to how it should be. Thanks!

Hi
Welcome to the Forum please try these steps given below this might help you to fix your issue.
Disclaimer
You are using this guide at your own risk. I don't take any responsibility for any problems.
Important information
Please create a set of recovery discs, Windows Vista or Linux System Repair Disc and back up all important data before you will do anything.These steps will save you a lot of troubles if something will go wrong.
Table of Contents:
A How to use the guide
B Basic information which you need to know
C Our problem
D Possible solutions to the problem
E Pros and cons
F Convert the C partition
G Remove the HP_TOOLS partition
H Remove the RECOVERY partition
I Remove the SYSTEM partition
J FAQ
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Similar Messages

When trying to remove a partition on my hard drive I couldn't

when trying to remove a partition on my hard drive I got an error and the option was grayed out in boot camp assistant. error message: "The startup disk cannot be partitioned or restored to a single partition. startup disk must be formatted as a single Mac OS Extended (Journaled) volume or already partitioned by Boot Camp Assistant for installing Window".

I am going to revise my question to this. If I compress my itunes folder which would save me a considerable amount of space will this make the music and apps information stored in there unsyncable?

How do I remove the partition on my hard drive?

I've got 20 GB dedicated to Windows but want to remove the partition and make the hard drive 100% Mac-use only. Any ideas on how to do that?

Use the Boot Camp Assistant in the /Applications/Utilities/ folder to remove it. If you're running Mac OS X 10.4, also see this article.
(56735)

How to remove and destroy Mac Book hard drive

I have an old MacBook no longer working, won't even fire up. I wish to dispose of it but even though it is not working I would like to make sure everything on it is wiped. So I guess I need to remove the hard drive and smash it? How do I remove it?

I would remove the cover and find the drive..... I have not done that myself, so I have no detailed suggestion.
Barry

Hi, how do i remove a partition on my hard drive and on my time capsule

hi,
how do i import an aperture vault onto a new computer with aperture 3 installed

Use the Boot Camp Assistant in the /Applications/Utilities/ folder to remove it. If you're running Mac OS X 10.4, also see this article.
(56735)

How to remove the lower of 2 hard drives on 733 Digital Audio

I have an old 733 G4 that had a drive fail... I removed one to test it (the upper drive) which turned out to be the slave... So now I need to remove the master which is in the lower position.... However, there are no visible screws holding the lower drive in place. I used an alan wrench to access from the side panel, but there is some sort of tab holding the center in place (right under the apple logo on the side). It seems like if i force it it will break the side panel...
what it the trick to get the main drive out? its stuck in there, again, with no visible screws... am i missing something?

nevermind... found it.... darn small screw hidden under the jumpers.

How do I re-partition my iMac hard drive?

Originally partitioned my 1TB internal to 250GB/750GB. Now it seems I need more space for my boot partition. I've used Time Machine to BU. So do I have to completely erase, booted from my Snow Leopard install disks, partition like I want to, and then use my Time Machine BU to re-install all my stuff? Will it recognize my new partition and put each BU disk into its' proper place?
Thanks!!!

It depends on which partitions are where, and which ones you want to keep/move/change.
With Disk Utility, you can expand a partition without erasing it if it's not the last one on the drive.
So if the diagram shown by Disk Utility when you select the top line for the drive, then the Partition tab shows partition A on top and B on the bottom, you can delete B and expand A to fill the drive. Then click the plus sign at the bottom to split the expanded A, and set the sizes as needed. Then you'll only have to restore B.
It's not quite the same thing, but there are a couple of screen prints in #6 of Time Machine - Frequently Asked Questions (or use the link in *User Tips* at the top of this forum), that should give you the general idea.
But if the partitions are arranged the other way, yes, you must completely erase and repartition.
I'd strongly agree with Thomas that you should have a second backup before starting this, just in case something goes wrong. It's unlikely, but does happen on occasion.
I'd also agree that in most cases OSX works much better with OSX, apps, and data in a single partition; Apple's engineers spend lots of time optimizing it to do just that. There are exceptions, of course, but one big pot is usually better than two small ones.
To restore your boot partition, see #14 in the FAQ; to restore a data-only partition, see #15.

Create two partitions on one hard drive?

Hi
I have an external hard drive I want to use for both PC and Mac.
Can somebody please help me on how to create two partitions on the hard drive, one with Mac extended format and one with NTFS format.
Many thanks

pbmarcano wrote:
Alternatively (my usual approach): Format the Windows partition to FAT then when you bring it to a windows machine, format the partition to NTFS.
No need to format to NTFS, you can convert to NTFS with no destruction of data.
Just format to FAT in Disk Utility, then when accessing the FAT drive in WIndows:
*To convert a volume to NTFS from the command prompt*
http://technet.microsoft.com/en-us/library/bb456984.aspx
Open Command Prompt. Click Start, point to All Programs, point to Accessories, and then click Command Prompt.
*In the command prompt window, type: convert drive_letter: /fs:ntfs*
For example, typing convert D: /fs:ntfs would format drive D: with the ntfs format. You can convert FAT or FAT32 volumes to NTFS with this command.

How do I remove Apple Mail from my hard drive? Over 10,000 downloaded into my mail and continues to freeze up--- I just want to use my gmail account directly

How do I remove Apple Mail from my hard drive? Over 10,000 downloaded into my mail and continues to freeze up--- I just want to use my gmail account directly

I go to Gmail to do my email yes, in my browser, but ya know how sometimes you click on a website to email someone and it pulls up apple mail, and then tons of email dump into apple mail and it frequently causes my computer to lock up and have to shut down w/escape. I thought it would be better to take it off if I could

How to put a recovery partition on the hard drive

How can I create a recovery partition on the hard drive of my laptop. I had to reinstall the whole system, and tried to use the HP recovery software they sent me but it quit when it was about three quarters the way finished. I had to use a copy of windows 8 to put the system back on my laptop. After I got it all straighten out, I updated it to windows 8.1 and it seems like the computer runs a lot faster with windows 8.1 on it. Now I need to find away to install a recovery partition on my hard drive.
Thank You
Garry Crist

When requesting assistance, please provide the complete model name and/or product number of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue.
The above requested information can be found on the bottom of the computer or inside the battery compartment. Please do not include the serial number. Please enter the model/product information into HP's Online Consumer Support page and/or post it here for our review.
A Recover partition is something the factory places on the computer. It is an image of the factory installation and the software required to restore the computer to a factory like state using that image. You will not be able to create a Recovery partition on your computer unless you use the HP Recovery Discs to return the computer to a factory like state. Please note the HP Recovery Discs and the resulting HP Recovery partition will only contain an image of Windows 8 that cannot be updated to reflect the installation of Window 8.1.
My suggestion is to use the Windows "System Image Backup" utility to create an exact image of the Windows 8.1 partition as it currently is. If your computer developes an issue or you need to replace the hard drive, all you have to do is "restore" the image to the computer. You will need to use an external USB hard drive or other media to store the image. Please see Windows 8.1 Tip: Use System Image Backup for instructions on creating and storing a "Windows - System Image Backup."
If you have any further questions, please don't hesitate to ask.
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

How can I partition my external hard drive supporting mac OS in one partition and windows OS in another?

Hello everyone, how can I partition my external hard drive supporting mac OS in one partition and windows OS in another?

OK. Start with:
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to two (2). Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Click on the Erase tab in DU's main window. Select one of the two partitions, preferably the first one, change the Format type: to MSDOS then click on the Erase button.

How do I partition my external hard drive without losing data?

How do I partition my external hard drive without losing the data already on it? I've been using it with Time Machine on my old computer, but want to use it as a regular drag-and-drop type back up on my new computer. Is there any way to basically split the hard drive so I can still access the Time Machine backups on my old computer, but also be able to use it with my new mac? Thanks!

If you reformat the drive all data is lost.
The only way to save the data is to copy it somewhere else during the reformat.
Drag & drop will not backup things correctly.
I suggest you set up partition for each Mac and then point Time Machine to each of the partition for each of the Macs.

How can I partition an external hard drive with data in it? When I select the drive, the partition option is grayed out.

I am having a problem partitioning an external hard drive with data in it.
When I select the partition, everything is grayed out. I can't add a a partition for some reason. When I asked this question to other people, they told me to select my partition "io" to do it from there.
As you can see, I can't seem to partition it form there either. I ran the Verify Disk utility but the volume came out okay.
Any ideas as to what the problem would be?
Thanks!
Luis

Select the main hard drive entry (topmost one.) Click on the Partition tab. Shrink the existing partition by grabbing the sizing gadget in the bottom right corner and pushing up until you free up enough space for your second partition. Be sure you do not shrink to less than the space currently occupied by your files. Click on the Add[+] button to create a new partition in the free space. Click on the Apply button and wait until the partitioning is completed.

How to install and reconfigure a new hard drive?

How to install and reconfigure a new hard drive?
I installed a new hard drive from best buy for my "vintage" MacBook laptop. When I turned on the laptop and the flashing folder appeared, I need help?
I looked online for some clues. I put in the software disk I received when I bought the disk but I cannot select a destination volume to install the software. I tired to partition the drive within disk utility but there was an input/output error. Should I just plug in my external hard drive and hope everything reboots like magic ?
Thank you for any help you can give

How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the external drive then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your new hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer.

Hello, i am new to the mac and i need to learn how to re image using an external hard drive

Hello, i am new, like baby fresh new,...lol, to the mac and i need to learn how to re-image using an external hard drive.

How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the external drive then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your new hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer.

How to remove a partition of my hard drive

Similar Messages

Maybe you are looking for