How to remove letterbox from a 16:9 video in Premiere Elements

I imported widescreen DV video via FireWire into Adobe Premiere Elements 8, but it displays with letterboxing (black bars on top and bottom). How do I get rid of this? The frame size is not editable in Project Settings.

Unfortunately, PrE does not allow one to make changes to a Project, once it has been setup. You will need to setup the Project to match your source footage, your Assets, 100%. Otherwise, issues will ensue.
If needed, the free utility, G-Spot can be used to determine the attributes of the footage. Frame Size, Frame Rate and PAR is very, very important.
Good luck,
Hunt
PS - even PrPro has just added the ability to "change horses in mid-stream," because it uses Sequences, which are like mini-Projects within a master Project. Before CS4, even with the Sequences, one had to get the Project Preset correct, before starting. Now, one can just do a new Sequence with new Presets, and Copy/Paste the mis-matched footage into it.

Similar Messages

  • How do I burn a dual layer DVD video with Premiere Elements?

    I am trying to burn a video from Premiere Elements to a dual layer DVD.   I choose  "DVD" -- and it seems to recognize my disc -- then I "fit to disk" (the video is one hour  -- then I attempt to burn -- and nothing happens.  I have tried it on my internal DVD and on my external BluRay --neither seems to work

    rross43
    If you insert a DVD double layer single sided disc in the burner tray, Premiere Elements recognizes that as such with Publish+Share/Disc/DVD disc. If you insert a DVD standard in the burner tray, Premiere Elements recognizes that for what it is.
    The only time you see a distinction for double layer vs standard disc is in the burn to folder.
    Both DVD disc types use the same max bitrate 8.00 Mbps. But, the DVD standard capacity is 4.38 GB not really 4.7 GB, and the DVD double layer single sided is 7.95 GB not really 8.5 GB. That has to do with the disc capacity labeling and not Premiere Elements.
    Good job with the burn to folder. In a time crunch, you can take the VIDEO_TS Folder from the saved folder and take it to DVD-VIDEO on DVD double layer single sided disc using the ImgBurn program.
    But, back to burn to disc....the successful burn to folder is pointing to the burner or the disc itself. What brand disc are you using?
    What is the mode of failure for your burn to disc....you say nothing happens. Does that mean you hit the burner button and nothing happens?
    We could look at deleting the Adobe Premiere Elements Prefs file or do a program uninstall, free ccleaner run through, reinstall with antivirus and firewall(s) disabled. But, let us review the burner and discs situation first.
    Thanks.
    ATR

  • How to remove letterbox from 16:9 video for Web posting?

    What I'm trying to do is fairly simple, it would seem
    I have SD footage captured 16:9 anamorphic and I would like the final output of this quicktime file to have the letterbox removed, making the screen filled but retaining the 16:9 ratio.
    I found some useful pictures online for a visual aid to what i'm tryin to achieve if there is confusion
    http://forum.videohelp.com/images/guides/p1469520/lost122.png

    Question: I shot in HD downconverted from camera firewire into FCP as anamorphic 16:9 SD. I do see the letterboxing in the canvas. Is this wrong then? in SD you're saying I can see 16:9 anamorphic w/o letterboxing in the canvas??
    My ultimate goal is to put my 16:9 output video online like i've seen in before online, which had only content, and no letter boxing... Elaborate or reiterate please???
    Thanks a million.

  • HT1386 The first time I synced my iphone with my mac, I didn't realize that all of my photos from iphoto would transfer over to the phone.   Now, I need to remove some, as they are taking up too much space.  I cannot figure out how to remove them from the

    The first time I synced my iphone 4 with my mac, I didn't realize that all of my photos from the iphoto library would transfer over to the phone (more than 3,000).   Now, I need to remove some, as they are taking up too much space.  I cannot figure out how to remove them from the phone.  I tried to uncheck boxes and sync again, but I get a message that there is no room on the iphone.  I've read as many articles as I can find, but still cannot manage this.  Thanks for any help.

    Open itunes, connect iphone, select what you want, sync

  • How to remove pics from my 3GS...???

    How to remove pics from my 3GS..???

    Photos taken with the phone can be deleted by selecting them and hitting the little wastebasket icon in the right bottom corner.
    Photos you did sync to your phone, can only be removed by deselecting them in the photo pane in iTunes, the following sync will remove them from the phone.

  • Does anyone know how to remove images from google

    i had instagram and i didnt upload images of myself but i only used my own image in the display picture and some how it has gone on to the google image search yesterday i deleted my account but when i checked to see if my images do appear in the google images i had some really bad regrets !! i reallywant to know how i can remove pictures off the google image search  even doe this does not kind of relate thank you .

    Does anyone know how to remove vocals from an import from I tunes...a  polyphonic stereo mix ?
    If you are talking about some "Karaoke" method using Logic I'll try to offer one. Before that I must say that most of the Karaoke methods are based on reversing the Phase of one of the stereo channel and bussing or merging the stereo into Mono. The result is: killing all Pan Centered in the mix - like Main Vocal, Bass, Kick, SN ect.
    The artifacts of the Stereo FX of the main vocal will stay in the Karaoke, cause the FX is stereo etc.
    Here is the Logic Setup I can offer to try some Karaoke trick using Logic.
    1. Import a Stereo mix into a Logic Stereo track.
    2. Create another stereo track and duplicate (copy) the Original Mix region to the duplicated track.
    3. Hard Pan L/R both stereo tracks.
    4. Insert an EQ and Gainer plugins into the duplicated track (R).
    5. Set the Output select of the both tracks to a Bus and assign the new Aux Track Switch mode to "Mono".
    6. Open the Gainer plugin and thick the "Phase Invert" Right button.
    7. To keep the "lowend" instruments like the bass and kick, open the EQ plugin and enable the Low Cut filter and try some Hz settings 80-115, or different Q which will sounds better for your Karaoke.
    P.S Click the image below to show its real resolution!
    Regards,
    A.G
    ======================================
    www.audiogrocery.com
    Author of: Logic GUI Deluxe(Free), Vox De Bulgaria s.a.g.e vocal pack for RMX, Logic Snapshot Console, RMX Power CTRL - Logic Environment Midi editor for Stylus etc.
    ======================================

  • How to remove Unicode from XML file

    I get following error when unmarshal xml:
    [java] org.xml.sax.SAXParseException: An invalid XML character (Unicode: 0x15) was found in the element content of the document.
    Anyone know how to remove Unicode from xml file? Can I remove the unicode by rebuild the file?
    Thanks

    These sort of error usually occur when you're using a different character encoding to read the file than the one you wrote it with. Perhaps if you were to post the problem section of the file and/or the code that created it in the first place.

  • How to remove iPhone from a certain computer

    How to remove iPhone from a certain computer along with it's ID to allow another phone to use the comp soley.

    You do not need to do anything.
    Simply stop syncing the iphone to the computer and begin syncing the new iphone to the computer.

  • How to remove Seperator from check-in and profile check in pages

    How to remove Seperator from check-in and profile check in pages
    The seperator is included on the checkin pages, which is present in the std_page with name "std_namevalue_separator", this is called by td_document_checkin_fields and std_document_file_fields.
    Defination of include:
    <@dynamichtml std_namevalue_separator@>
    <$if not isUploadFieldScript$>
    <tr>
         <td width="<$captionFieldWidth$>"><hr /></td>
         <td width="<$captionEntryWidth$>"><hr /></td>
    </tr>
    <$endif$>
    <@end@>
    I have to remove the following include from some of the profile check in page.
    Please suggest if anyone have some idea, how to proceed.
    Thanks,
    Sumit

    791848 wrote:I have to remove the following include from some of the profile check in page.The key here is that you want to do this in some profiles, not all profiles or globally, if I'm reading this right.
    Without writing a component, you can put this code in the "side effects" box in the desired profile(s). This code removes the horizontal rule, and inserts a non breaking space in its place.
    <$setResourceInclude("std_namevalue_separator","<$if not isUploadFieldScript$>
    <tr>
    <td width=\"<$captionFieldWidth$>\"> </td>
    <td width=\"<$captionEntryWidth$>\"> </td>
    </tr>
    <$endif$>")$>YMMV. The non-breaking space may get stripped out in the forum.

  • How to remove text from .swf animation?

    how to remove text from .swf animation? Can no find this text
    in fla file. Flash 8.

    exactly what 'text' are you referring to? text that you typed
    on the Stage using the 'textTool'? simply select the text with the
    'arrowTool' and hit delete.
    If you are referring to a textField that you want to
    eliminate after a certain amount of time, within your animation
    sequence. first copy the text, create a new layer, paste the text
    in place, then where you want to have the text 'disappear' insert a
    'blank keyframe' at that point in the text layer.
    OR place the textfield within a MC and remove it with code.
    OR if the text is dynamic and you wish to use the position at a
    later time, pass a value of null or and empty string to the field
    at the point you wish. And there are other ways still. :) hope one
    of these works for you.

  • How to remove passcode from ipod touch 3g  if power botton is not working?

    how to remove passcode from ipod touch 3g  if power botton is not working?

    Use this program to place the iPod in recovery mode so that you then can restore the iPod via iTunes.
    RecBoot: Easy Way to Put iPhone into Recovery Mode

  • How to remove myself from/leave a team?

    Hi
    I'm using Visual Studio Online in my software development classes. The problem is that the "Accounts list" on my Visual Studio Online portal is crowded with projects from past years. A clean-up is needed.
    I found this solution (https://social.msdn.microsoft.com/Forums/vstudio/en-US/80057697-38d7-4161-8564-13c630943484/vs-tfs-online-how-to-remove-myself-from-a-team-?forum=TFService), but the problem in order to apply it is that I have no more contact with
    a lot of those students + most of their accounts are expired.
    How can I solve this?
    Thanks in advance!
    Evert
    PS: my apologies for any linguistic mistakes... English isn't my mother tongue.

    Hi Evert,
    Based on your description, seems you're the owner of the Visual Studio Online account. If you want to remove your account from the teams that expired, then you can delete the teams directly in team project administrative page of team web access.
    If you only want to remove your account from the teams, then you can click the team and remove your account in administrative page.
    Best regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • HT4859 kindle fire how to remove items from icloud

    kindle fire how to remove items from icloud

    Kindle Fire's don't work with iCloud, your question makes no sense.

  • How to remove items from iPad home screen?

    How to remove items from iPad home screen?

    Press and hold any of the apps and after a couple of seconds or so they should start to shake. Then press the 'x' in the left corner to delete the ones that you don't want, and when you've finished deleting press the home button so as to stop the shaking. If you don't get the 'x' on any of the apps that you've downloaded (you can't delete built-in apps) then check that Settings > General > Restrictions > Deleting Apps isn't set 'off'

  • How to remove items from my reading lists on my ipad?

    how to remove items from my reading lists on my ipad?

    Swipe across its name in the list and it should get a Delete button on it - tap that and it should be removed from the list

Maybe you are looking for