How to remove menu bar for a single tcode

Hi,
I created a Transaction iview with gui for html and now i want to deactive menu bar for a single tcode.
I'am able to remove menubar by passing parameter in Webgui but it will remove menu bar for all.
Can anybody provide me solution.
With regards,
Pradeep.B

Hi,
It's really possible. You can define an ITS service on your R/3 and apply parameter ~WEBGUI_SIMPLE_TOOLBAR. With this parameter you can hide all bars, using different values (3 bits). You can use, for example, value 132.
After that, you define an IAC iview on your portal with your ITS service.
Hope this helps,
Iván.

Similar Messages

How to enlarge Menu Bar for Mac Mini running on Hi Res displays

I'm running my Mac Mini on my Sony 32" hi def tv in 1080i mode. The picture is great, but the Menu Bar on the desktop of the Mac is so small its not readable. I"m able to increase the size of the desktop icons and their text, but can't change the size of the Menu Bar. Its okay in 780i, but I'd prefer to have it run in the higher resolution. Can this be done, and if so how?

Changing the size of the menubar is not a feature of the OS.

My safari menu bar is missing --the menu bar for desktop, HD, and apps appears, but when I click on Safari, it disappears, so I can no longer see my buttons for History, etc. I think my husband (pc user) clicked it away. Any ideas how to retrieve it?

My safari menu bar is missing. The menu bar for desktop, HD, and apps appears, but when I click on Safari, it disappears, so I can no longer see my buttons for History, etc. I think my husband (pc user) clicked it away when borrowing my computer. Any ideas how to retrieve it? Thanks.

I too was having the same problem However, I could access both the menu bar and the dock by hovering my mouse over them so it wasn't a huge problem but I prefered having it there anyway. I was not in full screen mode and I could still go into full screen mode if I wanted to. I found the easiest solution was to just quit safai and restart it, but it might not work for you considering you couldn't access you menu bar either way.
I found this article that allows you to hide/show the menu bar and the dock through TextEdit (didn't work for me) http://www.mactricksandtips.com/2009/07/hide-the-menubar-or-dock-in-specific-app s.html It is pretty old so it might not work for lion and a bit risky if you don't know what you're doing so I wouldn't really recommend doing it this way.
And KSheppard, I know it's not really any of my buisness, but the way to get answers to a question isn't by insulting others and being quick-tempered. Even if you feel like you were insulted first, don't try snapping at people who aren't obligated to help you. Honestly, it just makes everything easier if everybody is cooperative and polite.

After updating to Firefox 7.0.1, menu bar for Google,yahoo, Facebook (message,notification,profile,home) and others site are disabled. How can solve this problem?

after updating to Firefox 7.0.1, menu bar for Google(web ,image,video,map etc),yahoo, Facebook (message,notification,profile,home) and others site are disabled. even I cant log out from different sites cz the log out bar is completely disabled. I tried with Firefox 4;5 and 6, same problem exist . I tried by active all add ons for facebook, same problem exist. If I use internet explorer , I don't find such problem with it.
How can I solve this problem?

Thanks a lot for your swift response. And sorry if it was a bit too hectic to go through my detailed query (which I did because it was misunderstood when I asked previously). As I've mentioned above, I was informed that updating to 5.0.1 would '''require''' me to '''delete''' the current version and then install the new one. And doing so will involve losing all my bookmarks. I guess I should have been more specific and detailed there. By losing, I didn't mean losing them forever. I'm aware that they're secured in some place and deleting and installing the software doesn't harm its existence. What I meant that if I install the new version, I'd have to delete the old one. And after installing the new version, I'd have to transfer them (bookmarks) back from wherever they are. Get it? When it updated from 3.6.9 to 3.6.13, and from 3.6.13 to 3.6.18, I didn't need to follow that process. They were already present on their own.
BTW, I'm having no problems with 3.6.18 but after learning about the existence of version 5.0.1, I'm a bit too eager to lay my hands over it.
Thanks for your help; hope this wasn't extremely long.

Adobe premiere elements 12 - how to create menu bar action for my inserted image button

adobe premiere elements 12 - how to create menu bar action for my inserted image button without using their movie menu theme

forbemag
I do not think that I am completely focused into this completely, so let us see if the following is going to help.
You are going to need a base for your button. When you mention "image" button, I am assuming that you are using that term to differentiate between a text button and a thumbnail type button.
The menus (main and scene) take their origin in .psd files on the hard drive and strict nomenclature and structure for Layers Palatte. And, the buttons on the menus trace back to the menu markers on the Timeline, main menu marker and order of placement of scene markers. The scene thumbnail will only appear when there is a scene marker on the Timeline to which it.
In view of all that
Where have you already inserted this "image (button)"...into the Layers Palette of a Photoshop document or other? Is this "image (button)" in a structured Layer Group in the Layers Palette with sublayer groups, text layers, graphic/background layer"?
Let me give you an example
If you have a button (with thumbnail) on the main menu and you want that to open to a specific scene in your movie, then you use a main menu marker on the Timeline at the spot that you want that button to target.
If I am getting closer to what you seek, then please further clarify the DVD navigational envisioned scheme.
Thanks.
ATR
Add On...I did not see the exchanges between us and SG until after I had posted mine. I thought that your discussions were concluded. Please excuse the interruption.

HT4929 how do I get ICloud on my menu bar for email only?

how do I get ICloud on my menu bar for email only? I have snow leopard so I do not have all the requirements for I Cloud.

I have asked for your email address to be edited out. Posting your address in an open thread is a sure way to be bombarded by unwanted email, remember it will be here long after you have resolved your problem, for automated detection software to find.
If you want people to contact you, enable others to see your email address in your profile.

For GUI status in Transaction SE41 to remove menu bar.

Hi all,
I want to remove menu bar in se41 so that i can have a pop-up display with out menu bar. can anybody please suggest me ASAP.
Rewards to all.
Thanks,
Arthi.

Hi Arthi..
While creating a GUI Status in SE41
Select the Status type as : DIALOG BOX (instead of Normal Screen)This will Create the GUI status without Menu bar as per popup diaolgs.
Reward if Helpful.

Menu Bar for Struts application

Hi All,
We are developing the Struts based Web Application using Hibernate and for this we need the Menu Bar for all the pages in the application.But we are unable to write the code for the menu bar using java classes.
If possible please send the code for the issue.
Thanking you.
Ram

tsith wrote:
georgemc wrote:
ramachandrarao_bandaru009 wrote:
We are developing the Struts based Web Application using Hibernate and for this we need the Menu Bar for all the pages in the application.But we are unable to write the code for the menu bar using java classes.Then you probably shouldn't have applied for a job that required Struts experience
Right, I'm off to post in some Neurosurgery forum, see how far I can blag my way in that profession:
>
I am attempting to remove a cerebral tumour but I don't know one end of a gamma knife from the other. If anyone knows how to do this please detail the exact steps in laymans terms below
>1) open up head
2) locate tumor (note correct spelling ;-)
3) remove tumor - be careful not to remove good stuff
4) close head
5) ???
6) profitYou spelt tumour wrong :p

Remove menu bar from second monitor maverick

Hi, Can i Remove menu bar from second monitor maverick ?
Thanks

Apple has sort of screwed up the whole full-screen / multi-screen features of OSX. I get it's hard to achive it all in a "perfect way" for everyone but the so called "improved" multi-screen features of 10.9 add a number of issue on top of the "fixes".
1. Switching between apps with CMD + TAB is bugged with using 10.9 screen-setup. The OS doesn't understand what screen I'm using and the CMD + TAB feature shows up on screen 1 or screen 2. The only way I've found to controll this is by activating the DOCK on either screen which is a very bad solution.
2. Spotlight searching always follows the "active" screen. At least 10.9 understands what screen is my active one but in this case I never ever want screen 2 to have Spotlight on it. Very irriting.
3. Remembering application positions. If I open an app from the dock on screen 1, place it on screen 2 close it and again open it from the dock on screen 1 the app will open on screen 1 and not screen 2. Some apps will remember certain windows on the correct display. A solution is to open the app from the dock on the display you want it on. Very irritiating.
4. Swiching between apps is also bugged. Concider I have mail on screen 2 and a new mail window on screen 1. I CMD + TAB to Safari on screen 2 after starting to write the new mail on screen 1. No problems here. If I now howvever CMD + TAB back to mail, the last active window (new mail window on screen 1) won't be active. Very irritating.
As noted above, going back to what we had in 10.7 and 10.8 solves these issues but doesn't solve Apples horrible fullscreen app issues. I'd go as far as saying Apple hasn't really fixed anything in 10.9 - only cause more issues and confusing behavoir. Fullscreen apps are often very lacking in funktion, having safari or mail fullscreen renders them on a large screen very very limited compared to "maximized". It's also very confusion that you are required to travel between virtual desktops to use full-screen apps. I personally would prefer the option of "layered fullscreen apps". For example VLC allows me to work this way.

HOW TO FIND MENU PATH FOR A TCODE

PLZ TELL ME HOW TO FIND MENU PATH FOR A TCODE .
I HAVE MADE A MENU ENHANCEMENT WITH TCODE +DW2.
IT MENU PATH IS NOT TRACEABLE.

Hi Madan,
It is in the transaction code S001.
Check my previous post on this.
It is not listed on the SAP Menu. Thats why SEARCH_SAP_MENU returns nothing...
Go to the Initial Screen and then type /n in the TCODE.
From there now type S001 to go to transaction S001.
The other ways do not work. Like combining both in a single step : "/ns001".

How to set Compatibility Mode for a single site in ie10

This question was originally posted on the Answers forum -
http://answers.microsoft.com/en-us/ie/forum/ie10-windows_7/how-to-set-compatibility-mode-for-a-single-site-in/187152e3-142a-4d96-8d1b-af82ef571eec
I am having problem with getting ie10 to set ie9 compatibility for a single site (sharepoint.contoso.com).
When I add this website in Compatibility View Settings (Alt > Tools > Compatibility View Settings > 'Add this Website') it adds the domain 'contoso.com' and not the individual website (sharepoint.contoso.com).
This cause other sites (www.contoso.com) to be configured to use compatibility mode. Because this is a separate site (different web server) to the site sharepoint.contoso.com (sharepoint 2010 server) we need different compatibility settings.
Using a different example to explain the issue -
Microsoft has three websites that are different websites created by different developers written in different programming languages and they only work with certain browsers.
microsoft.com (Website1 created by Developer1) - compatible with ie8/ie9/ie10
msdn.microsoft.com (Website2 created by Developer2) - compatible with ie8/ie9
technet.microsoft.com (Website3 website created by Developer3) - compatible only with ie10
The only thing the three website share is the URL contains 'microsoft.com'.
Marking 'msdn.microsoft.com' to run in compatibility mode affects the other 2 websites - mainly technet.microsoft.com which will not work now since it only runs in pure ie10 mode.
Should you be able to add an individual site to the compatibility list instead of all sites that have .microsoft.com in the URL? Am I missing a simple setting in the ie10?
As a workaround I am using the F12 Developer Tools to set the Browser Mode which temporary sets the compatibility mode. However this is not a nice solution to the end users at our organisation.

problem is not solved for non corporate environments...
You could start your own thread. Then if you got that answer and it was marked Answered you would have the ability to unmark it. The OP of this one seems satisfied. Also note that this is TechNet. Consumers can get help on Answers
forums.
Robert Aldwinckle
Oh! I wrote it wrong: I should have said: This is not solved for NON-AD environments. No demands what so ever to use Window 7/8 professional in a small corporation or on a big corporation with Island of smaller departments for example offshore.
The problem is that the thread is not "Answered" by the OP, its is marked answered by a moderator (and same moderator that did the answer) so no way of telling if the OP is satisfied.
But you are right in the fact that I am almost kidnapping the thread. But a complete answer would benefit all in this case I would presume.
Regards
/Aldus

How to create a Platinum,Gold and Silver Customer and how to set different price for a single material based on customer?

Hi All,
How to create a Platinum,Gold and Silver Customer and how to set different price for a single material based on customer?
Assume Material is Pen.
While creating Sales Order in VA01 how to bring different price for the same material for Platinum,Gold and Silver Customers.
Kindly help me out.
Thanks,
Renjith Jose

A good place to start is http://www.javaworld.com/javaworld/javatips/jw-javatip34.html
Also, do a search in this forum on HttpURLConnection. That class allows you to use POST method to send form data to a web server.
"Hidden" variables are only hidden in HTML. The HTTP that gets POSTed to the web server doesn't distinguish between hidden and not hidden. That is, the content you would write to the HttpURLConnection.getOutputStream() would be something like:
hidden=1&submit=ok(Of course, the variable names would depend on what the web server was expecting from the form.)
Also, be sure to set the Content-Type request parameter to "application/x-www-form-urlencoded"

How to remove payment block for AP invoices which has been cleared

How to remove payment block for AP invoices which has been cleared
Thanks
Chiru

Hi,
Thanks for immediate response in fb02 is in deable mode
mrbr unable to change
please provide to to remove blocking code i will assign points
Thnaks
Chiru

Menu Bar for RTL Laguages

Hi,
I am new to flex, but excited.
I took some courses in Lynda.com, and the videos reffer to
LTR languges.
I wonder if it possible to make the Menu Bar for Right to
Left languages as well, which means the bars open from the right.
Thank you for your help

I think for this you need to create a custom component. Flex
3 has some support for rendering RTL languages, but I think text
input of these languages has some weaknesses. RTL language aware
controls are not yet in Flex. Maybe Flex 4, but I'm not sure. I
know some of the RTL language weaknesses will be addressed in Flex
4. Until, gotta do extra work.

How to remove leading zeros for an item number within quickviewer

how to remove leading zeros for an item number within quickviewer. Pls help

ask your abap guy to do it. not portal guys business.

How to remove menu bar for a single tcode

Similar Messages

Maybe you are looking for