How to remove old Class in Material master?

Hello SAP gurus,
A class has been assigned to one material and now my requirement is assign a new class to the material. Now the issue is after assign the new class while using the material in an order all the characteristic (from old and new class) is populating.
So is it possible to remove the old Class from that material?
Thanks
Sha

Hello Kalyan
I raised an OSS note for this and below is the reply from SAP. Thanks for your support.
Thank you for your query.
To delete the old class their are 2 options available to you .
1 )
To delete the old class you have to remove the assignments of where
it is used . Please access the old class in CL03 and then the menu
path "Environment - Where used list"
Once all assignments are removed you should be able to delete the class
2)
You could use a change number created in transaction CC01 to delete
the class from the classification view.
Please review note 166530 which explains about the deletion of
classification data.
Please refer to the online documentation at help.sap.com and the
Classification section where it states :
Once you have used engineering change management to process
characteristics, characteristics of a class, or classifications, you
must use engineering change management for all further changes.
I hope the information is of help , please test carefully on a Non
Productive system first
Enda Fennelly
Senior Support Consultant
AGS Primary Support
Global Support Center Ireland

Similar Messages

  • How to change Valuation class in material master(have stock)

    HI,
    I would like to change the valuation class in material master, How to change VC? is there any process before changing VC?
    I heared when Material have nil stock then only it's possible to change VC, Is it correct? which TC can I use for change VC?
    Regards,
    venki

    Dear venki,
    To change Valuation class you must have zero stock in the current period, and zero stock at the end of the last period, plus no open PO lines .  flag for deletion all open PO lines,
    Regards
    shankar

  • How to get Valuation class in Material master?

    Dear all,
                I want to have valuation class in my report and i want to take is as a material attribute.Actually i have check all the attribute of material master but valuation class is not there. i am having valuation class as a master data as individual . How can i get the valuation type in the Material master?I need it in Material master only.
    Regards,
    Macwan James

    Dear venki,
    To change Valuation class you must have zero stock in the current period, and zero stock at the end of the last period, plus no open PO lines .  flag for deletion all open PO lines,
    Regards
    shankar

  • How to remove any view from material master

    Hello guys,
       Actually we can attach the view to material master by MM01 and also by MM50.
       Now,consider this, in my company even we sale the semifinished material along with the finished material.So we have attached the sales view to semifinished material and finished material.Now my company has decided to not to sale the semifinished material.So there is no sense in keeping the sales view in material master of semifinished material.So we want to remove the sales view from the material master of semifinished material.
         So could you guys help me out to do this?

    Hi
    From the config for Material type attributes you can change the views relevant to Material type means you can unselect the sales views - that will definately take care of the new materials that will be created. But for the existing one's and the data is something you need to see and investigate
    I would advice you to check all the aspects in dev client and then take a decision.
    Thanks

  • How to Change Batch Classification of material master

    Hi,
    How to Change Batch Classification of material master  in a production system,Pl note that there is no stock and no open qty still system is not allowing me to delete the old Classification and add my new classification.
    Guys any solution for this.
    Thanks in advance
    rgds
    bijaya pradhan

    I believe there is a FM VB_CHANGE_BATCH for this, any body tried this FM?

  • Automatic batch determination without maintain the class in material master

    Hi,
           Is it possible that we can do automatic batch determination with-out maintaining the class in material master.
           My requirement is i want to do batch splitting at PGI level & user dont want to maintain class in material master only they will maintain VCH1.
           if i will maintain class then batch splitting happening at PGI but if i will remove the batch from material master as well as strategy group then splitting not happening.
    Regards
    Puneet

    Hi,
              if any one have solution then pls update
    Regards
    Puneet
    Edited by: puneet rhythm sharma on Dec 7, 2011 6:14 AM

  • How to upload PO text of material master ?

    dear gurus,
    how to upload PO text in material master in mass , can i use LSMW or BDC ? if yes then how?
    I have done the recording but LSMW is not working for PO text.
    Upesh khairnar.

    Hi!
    try using Purchasing Inforecord for this. in here you maintain master data linkage for Material Master and Vendor Master. You will just have to input the Material Number, the Vendor Account, and the Purchasing Org. In here you can maintain the PO text defaulted per Material Number. After the maintenance of Inforecord, the PO text will be reflected on the PO document.
    Here is the ff Transaction Code:
    - ME11 (Create Inforecord)
    - ME12 (Change Inforecord)
    - ME13 (Display Inforecord)
    Hope this helps, Thank you.
    Mik

  • How to remove leading zero from Material Number

    Hello Everyone,
    I need to figure it out how to remove leading zero from material number. Cureently extractor is sending material number as 100663. But when comes into BI i am getting as "000000000000100663" and similariy in report it is appearing as "000000000000100663". Now my client wants me to exclude preceeding zero for a material in all the reports.
    Is there any setting in query desinger to handle this issure or in the backend.
    Need your inputs.
    Thanks,
    Lasya.

    Hi
    you can use the function Module
    CONVERSION_EXIT_ALPHA_OUTPUT in the start routine
    to test this go to SE37  --- give the CONVERSION_EXIT_ALPHA_OUTPUT -
    >display -
    > F8
    in the input give 000000456
    and execute
    the out put will be 456
    for getting Zeros you can use
    CONVERSION_EXIT_ALPHA_INPUT--- to remove leading zeros
    Santosh
    Edited by: Santhosh Nagaraj on Oct 29, 2009 10:52 PM
    Edited by: Santhosh Nagaraj on Oct 29, 2009 10:54 PM

  • How to reset planned price in material master

    Hi Gurus,
    Can anyone tell me how to reset planned price in material master.
    my user has run ck40n with wrong values, but i am not able to reverse costing run by using ckr1 or ck44. what could be the reason behind this.
    even after executing tcode ckr1, i can still see the standard cost in material master.
    how to reverse the costing run.
    Thanks in advance
    Suresh

    Hi,
    If you want reset you can delete the cuurent planned price in the material master for the cuurent period,
    Use t.code CKR1,  you have to enter comapny code, plant,material
    In control parameters you have to choose radio button Current Standard Cost Estimates
    Current Standard Cost Estimates
    If you set this indicator, the system will select the current standard cost estimates for deletion.
    If you also set the Additive cost estimates indicator, then additive cost estimates will be selected for deletion.
    Regards,
    Rama Mohan Bangaru

  • How to remove old owner

    How to remove old owners name/apple Id out of my Iphone, because i cant upgrade ani Apps, because THE name/account of THE old owner is coming up olthe time, after THE upgrade to Io7
    I own à legal Iphone-4/16mb with à legal Apple Id.

    Only the old owner can remove their ID. This is Activation Lock, an antitheft protection system. Unless the previous owner releases the phone it cannot be used by anyone other than that owner. See: http://support.apple.com/kb/HT5661 for what the owner of an iPhone should do before selling or otherwise disposing of the phone.
    For more information on Activation Lock see: http://support.apple.com/kb/HT5818

  • Valuation class of material master to be changed

    Hello,
    My master data team has insereted a wrong valuation class in the material master record. Purchase order has been raised and a GR has been done for the same. SAP gives following steps to change the valuation class:
    The valuation class cannot be changed, choose 'Display error'
    Message no. M3368
    "Diagnosis
    You wanted to change the valuation class. However, this is not possible because one or more of the following already exist for the material:
    Valuated stocks in the current period or in the previous period
    Open purchase orders or delivery schedule lines
    Production orders for which a goods movement has already taken place
    System response
    Your change is reset by the system.
    Procedure
    If valuated stocks already exist, you can change the valuation class only as follows:
    a) Post the stocks of the material to an interim account.
    b) Change the valuation class in the material master record.
    c) Post the stocks of the material back to their original account.
    If open purchase orders already exist, you can only change the valuation class if you first flag the corresponding purchase order items for deletion.
    If production orders exist for which a goods movement has already taken place, you can only change the valuation class if you first set the status of the production orders to Deleted."
    My question is how do I post the stocks to an interim account since stock accounts are configured to post automatically?
    If anyone knows how to manage the posting, please let me know.
    Thanks
    Keyur

    Hi,
    Make the movement with a movement type in MIGO  that posts to the same account in FI for all Valuation classes.
    After changing the Val. CLass then reverse the above movement.
    Kind regards

  • Different GL Account for WRX - based on Valuation Class (No Material Master

    Hi Gurus,
    My scenario is as given below.
    1. We do not have any Material Master. We create short text PO's with account assignment category "P".
    2. We are also using Material Group in our PO. We have one Material Group for Domestic Purchases (say M1) and another Material Group (say M2) for Import Purchases.
    3. We have assigned valuation class say 3100 for Material Group M1 and valuation class 3101 for Material Group M2.
    4. Our plant is say RBUP and our valuation grouping code is say 0001 which is assigned to the same plant.
    Objective:
    While doing MIGO we want to have different GR/IR Account for domestic purchases say 108 and different GR/IR account for import purchases say 109.
    Issue:
    1. In OBYC setting GR/IR account is picked from transaction key WRX.
    2. Our entries in WRX are as given below for our Chart Of Accounts say DMN.
    Valuation Modifier Valuation Class GL Account
    0001 108
    0001 3100 108
    0001 3101 109
    3. But even when i am creating the PO with Material Group M2, it is not picking the GR/IR account 109, based on the valuation class i.e. 3101 which is assigned to the Material Group M2.
    Query:
    1. How can I achieve my objective of selecting GR/IR Account 109 for Import PO's and GR/IR Account 108 for Domestic PO's.
    Pl note we will not be maintain material master.
    Will give full 10 points if anyone can help me reslove this issue.
    Pl also do not waste any of your valuable time to address the account assignments for BSX or GBB-VBR. I am fully aware that in VBR this differentiation is possible.
    Rgds,
    Prasad.

    I suggest you to create a Dummy Materials. Lets say,
    material number: 1001
    enter material description as Domestic
    material number: 1002
    enter material description as Imports
    and in OBYC for GBB
    make the following settings:
    val grp      gen mod    val cla      gl a/c dr     gl a/c cr
    0001     VBR     4000     74180040     74180040
    0001     VBR     4001     78020091     78020091
    so that when u create PO u can get default GL (consumption GL )  for the material (u can use the same for material group also) and u can maintain WRX acc determination as follows ..
    val grp   val cla    gl a/c dr   gl a/c cr
    0001      4000     123456     123456
    0001      4001     456789     456789
    Thus u need to create 2 different valuation class for these material group specific and in PO while entering the text u can add the text which is displayed along with material description
    hope this helps

  • How to deactivate batch management at material master?

    Dear Sir/Madam,
    At the configuration,I have set "Batch Management" to be activated in plant level.  I have a problem which some of the plants do not use batch management.I understand that if you tick "Batch Management" field in material master, batch management is activated for the material in that plant.
    1. How do prevent user to tick "Batch Management" field in the material master which appears in the following views (depending on the material types):?
    - Sales: General/Plant
    - Purchasing
    - Plant data/Stor.1
    - Work Scheduling
    2. Is there any alternate way to prevent user to activate "Batch Management" in that material of their own plant despite it is activated at plant level in the configuration?
    Please advise.
    Thanks.
    Rgds,
    Esther Chong

    batch status management is just what its name says, you manage your batches with status (unreastricted use, restricted use).
    But his comes only into place after you have activated batch managment, it is not causing batch managment, it is only working with batch managment.
    Removing batch managment is almost impossible, you have to archive all batches first, to be able to archive the batches, you have to archive the production orders...creation of a new material is in most cases easier and quicker.
    Wit batch managment at plant level each plant can independently decide if a material is batch managed or not.
    if you want to restrict the entry of the batch management flag, then you have to customize your material master field selection at plant level.

  • How to remove old signed in devices from iCloud.

    How does one remove old signed apple devices from iCloud?  I erased devices, deleted backups, but they still show up.

    Hello Kalyan
    I raised an OSS note for this and below is the reply from SAP. Thanks for your support.
    Thank you for your query.
    To delete the old class their are 2 options available to you .
    1 )
    To delete the old class you have to remove the assignments of where
    it is used . Please access the old class in CL03 and then the menu
    path "Environment - Where used list"
    Once all assignments are removed you should be able to delete the class
    2)
    You could use a change number created in transaction CC01 to delete
    the class from the classification view.
    Please review note 166530 which explains about the deletion of
    classification data.
    Please refer to the online documentation at help.sap.com and the
    Classification section where it states :
    Once you have used engineering change management to process
    characteristics, characteristics of a class, or classifications, you
    must use engineering change management for all further changes.
    I hope the information is of help , please test carefully on a Non
    Productive system first
    Enda Fennelly
    Senior Support Consultant
    AGS Primary Support
    Global Support Center Ireland

  • How to remove old iPhone from iTunes account?

    Last I was on itunes it told me I had 4 out of 5 authorized devices on my account, how do I remove old devices?

    Follow the instructions here >  iTunes Store: About authorization and deauthorization

Maybe you are looking for

  • Can i inactivate a sub report?

    Hi, I'm using sub reports in a principal report. When the final user see's the report, he can clic on the sub report witch will show in a second page. I would like to disalbe this action, is it possible? If not do you know a trick to prevent it? For

  • Best way to delete a .plist item?

    Hi everyone! I have found similar topics on this...but maybe someone can clear it up for me? I want to delete an item within a .plist, specifically to remove an item from the Dock by scripting. (See com.apple.dock.plist) If I use System Events I can

  • Get programmatically all the portlets associated to a desktop

    Hi, I need to create a desktop programmatically and then change the value of a portlet preferences in every portlet of the desktop I just created. I create my desktop like this : DesktopDefinition def = desktopDefinitionControl.createDesktopFromPorta

  • Nokia Lumia 1020 - did not come with Windows 8 and app is not available on phone

    I was told to install Windows Phone Developer Registration Tool, but I get a Setup Blocked message - This product can only be installed on Windows 8 or later 64-bit Machine...the notebook that I am trying to install it on is Windows 8, etc. I want to

  • Converting Nikon raw file

    Hi Folk, Having converting Nikon raw files (NEF) I found that MB25 in NEF became MB 51 in DNG. Is it normal? Can I have more data than in the original? Thanks Shaul