How to remove the "table control" icon in ITS based ESS screen

Hi All,
I have upgraded my external ITS 620 to patch level 28. Earlier we were on patch 04.
Since then I am seeing the table control in my ESS screens (ITS Based),
In some thread i got to know that the table control is totally redefined / modified from patch 22 of ITS.
Is it possible that we can remove / hide the table control from the screens.
I dont want to let the users access the "Table Settings" screen at all....can u plz tell me how to do it
regards,
PK

we could not remove the table control...it seems like we can not remove it as the table control also appears in the r3 screens also..

Similar Messages

  • How to handle the table control in bapi?

    how to handle the table control in bapi? example va01.
    i pass multiple line item what is the procedure?
    header detail same .
    eample ship to party
           sale to party.
    line item mulptiple
    10 mat1
    2o mat2
    30 mat3.
    in bapi we can pass sinle line item.
    any way to handle multiple line item pass through the bapi.
    Message was edited by:
            Karthikeyan Pandurangan

    BAPI is not going through the screen flow logic so you need not to worry about the table control. Just check in the BAPi there must be one table parameter for line items just pass one int table with your data to that table parameter it will automatically update the tables.
    Regards
    shiba dutta

  • How to modify the table control?

    Hi all,
    How to modify the table control after setting the lines  = 1. ie tbl_ctr-lines = 1.(tbl_ctr is the table control).
    Can anyone explain this with an example?
    Thanks.

    hi
    http://help.sap.com/saphelp_nw04/helpdata/EN/9f/dbac5e35c111d1829f0000e829fbfe/content.htm
    Regards
    pavan

  • How to refresh the table control on some action

    Hi All,
         In a web Dynpro application, I am filling data to the Table control through Supply function. When  I do some action (like save new record )  i want to refresh the table control means add the newly added record.
       How to refresh the Table control.
    Thanks
    Hemalatha

    hi hema........
        if you are using a select query inside the supply function...
        then...
        you can just use node->invalidate(). method..
        it just invalidates the node that is bound to the table.
       so the supply function will be called again, which again uses the select query to fetch the values.. so that your table gets refreshed.
    ---regards,
       alex b justin

  • How to clear the table control content

    Hi All,
    I am doing BDC for cost estimate change. In this the transaction KKPB contains table control. So when ever i process with particular cost estimate, i need to fill the table control with the values. Here when i am doing the BDC for change, i need to clear all the contents of the table control then i need to fill with new entries.
    So my problems is how to clear the table control entriee?? please help me in this??
    Many Thanks,
    Raghu.

    Hi this might help u.
    Check the below link.
    http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
    THis is example to upload the Bank details of the Vendor which has the TC.
    REPORT zprataptable2
           NO STANDARD PAGE HEADING LINE-SIZE 255.
    DATA : BEGIN OF itab OCCURS 0,
            i1 TYPE i,
            lifnr LIKE   rf02k-lifnr,
            bukrs LIKE   rf02k-bukrs,
            ekorg LIKE   rf02k-ekorg,
            ktokk LIKE   rf02k-ktokk,
            anred LIKE lfa1-anred,
            name1 LIKE lfa1-name1,
            sortl LIKE lfa1-sortl,
            land1 LIKE lfa1-land1,
            akont LIKE lfb1-akont,
            fdgrv LIKE lfb1-fdgrv,
             waers LIKE lfm1-waers,
            END OF itab.
    DATA : BEGIN OF jtab OCCURS 0,
            j1 TYPE i,
            banks LIKE lfbk-banks,
            bankl LIKE lfbk-bankl,
            bankn LIKE lfbk-bankn,
             END OF jtab.
    DATA : cnt(4) TYPE n.
    DATA : fdt(20) TYPE c.
    DATA : c TYPE i.
    INCLUDE bdcrecx1.
    START-OF-SELECTION.
      CALL FUNCTION 'WS_UPLOAD'
        EXPORTING
          filename = 'C:\first1.txt'
          filetype = 'DAT'
        TABLES
          data_tab = itab.
      CALL FUNCTION 'WS_UPLOAD'
       EXPORTING
         filename                      = 'C:\second.txt'
         filetype                      = 'DAT'
        TABLES
          data_tab                      = jtab.
      LOOP AT itab.
        PERFORM bdc_dynpro      USING 'SAPMF02K' '0100'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'RF02K-KTOKK'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '/00'.
        PERFORM bdc_field       USING 'RF02K-LIFNR'
                                      itab-lifnr.
        PERFORM bdc_field       USING 'RF02K-BUKRS'
                                      itab-bukrs.
        PERFORM bdc_field       USING 'RF02K-EKORG'
                                       itab-ekorg.
        PERFORM bdc_field       USING 'RF02K-KTOKK'
                                       itab-ktokk.
        PERFORM bdc_dynpro      USING 'SAPMF02K' '0110'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'LFA1-LAND1'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '/00'.
        PERFORM bdc_field       USING 'LFA1-ANRED'
                                      itab-anred.
        PERFORM bdc_field       USING 'LFA1-NAME1'
                                      itab-name1.
        PERFORM bdc_field       USING 'LFA1-SORTL'
                                      itab-sortl.
        PERFORM bdc_field       USING 'LFA1-LAND1'
                                      itab-land1.
        PERFORM bdc_dynpro      USING 'SAPMF02K' '0120'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'LFA1-KUNNR'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '/00'.
        PERFORM bdc_dynpro      USING 'SAPMF02K' '0130'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'LFBK-BANKN(01)'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '=ENTR'.
        cnt = 0.
        LOOP AT jtab WHERE j1 = itab-i1.
          cnt = cnt + 1.
          CONCATENATE 'LFBK-BANKS(' cnt ')' INTO fdt.
          PERFORM bdc_field  USING fdt jtab-banks.
          CONCATENATE 'LFBK-BANKL(' cnt ')' INTO fdt.
          PERFORM bdc_field USING fdt jtab-bankl.
          CONCATENATE 'LFBK-BANKN(' cnt ')' INTO fdt.
          PERFORM bdc_field   USING fdt jtab-bankn.
          IF cnt = 5.
            cnt = 0.
            PERFORM bdc_dynpro      USING 'SAPMF02K' '0130'.
            PERFORM bdc_field       USING 'BDC_CURSOR'
                                          'LFBK-BANKS(01)'.
            PERFORM bdc_field       USING 'BDC_OKCODE'
                                          '=P+'.
            PERFORM bdc_dynpro      USING 'SAPMF02K' '0130'.
            PERFORM bdc_field       USING 'BDC_CURSOR'
                                          'LFBK-BANKN(02)'.
            PERFORM bdc_field       USING 'BDC_OKCODE'
                                          '=ENTR'.
          ENDIF.
        ENDLOOP.
        PERFORM bdc_dynpro      USING 'SAPMF02K' '0130'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'LFBK-BANKS(01)'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '=ENTR'.
        PERFORM bdc_dynpro      USING 'SAPMF02K' '0210'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'LFB1-FDGRV'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '/00'.
        PERFORM bdc_field       USING 'LFB1-AKONT'
                                      itab-akont.
        PERFORM bdc_field       USING 'LFB1-FDGRV'
                                      itab-fdgrv.
        PERFORM bdc_dynpro      USING 'SAPMF02K' '0215'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'LFB1-ZTERM'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '/00'.
        PERFORM bdc_dynpro      USING 'SAPMF02K' '0220'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'LFB5-MAHNA'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '/00'.
        PERFORM bdc_dynpro      USING 'SAPMF02K' '0310'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'LFM1-WAERS'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '/00'.
        PERFORM bdc_field       USING 'LFM1-WAERS'
                                      itab-waers.
        PERFORM bdc_dynpro      USING 'SAPMF02K' '0320'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'RF02K-LIFNR'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '=ENTR'.
        PERFORM bdc_dynpro      USING 'SAPLSPO1' '0300'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '=YES'.
        PERFORM bdc_transaction USING 'XK01'.
      ENDLOOP.
      PERFORM close_group.
    Header file:
    1     63190      0001     0001     0001     mr     bal188     b     in     31000     a1     inr
    2     63191      0001     0001     0001     mr     bal189     b     in     31000     a1     inr
    TC file:
    1     in     sb     11000
    1     in     sb     12000
    1     in     sb     13000
    1     in     sb     14000
    1     in     sb     15000
    1     in     sb     16000
    1     in     sb     17000
    1     in     sb     18000
    1     in     sb     19000
    1     in     sb     20000
    1     in     sb     21000
    1     in     sb     22000
    2     in     sb     21000
    2     in     sb     22000
    REPORT zmm_pr_upload_mat
           NO STANDARD PAGE HEADING
           LINE-SIZE 255.
    Standard Include for Selection Screen
    INCLUDE bdcrecx1.
    Internal Table for Upload Data
    DATA: BEGIN OF i_pr OCCURS 0,
    Header Screen
            sno(3),               " SNo
            bsart(004),           " PR Type
            epstp(001),           " Item Category
            knttp(001),           " Account Assignment
            eeind(010),           " Delivery Date
           lpein(001),          " Category of Del Date
            werks(004),           " Plant
            lgort(004),           " Storage Location
            ekgrp(003),           " Purchasing Group
            matkl(009),           " Material Group
            bednr(010),           " Tracking No
            afnam(012),            " Requisitioner
    Item Details
            matnr(018),           " Material No
            menge(017),           " Quantity
           badat(010),
           frgdt(010),
            preis(014),           " Valuation Price
           waers(005),           " Currency
           peinh(005),
           wepos(001),
           repos(001),
            sakto(010),           " GL Account
            kostl(010),           " Cost Center
           bnfpo(005),
          END OF i_pr.
    Internal Table for header Data
    DATA: BEGIN OF it_header OCCURS 0,
            sno(3),               " SNo
            bsart(004),           " PR Type
            epstp(001),           " Item Category
            knttp(001),           " Account Assignment
            eeind(010),           " Delivery Date
            werks(004),           " Plant
            lgort(004),           " Storage Location
            ekgrp(003),           " Purchasing Group
            matkl(009),           " Material Group
            bednr(010),           " Tracking No
            afnam(012),            " Requisitioner
          END OF it_header.
    Internal Table for Item Data
    DATA: BEGIN OF it_item OCCURS 0,
            sno(3),               " SNo
            matnr(018),           " Material No
            menge(017),           " Quantity
            preis(014),           " Valuation Price
            sakto(010),           " GL Account
            kostl(010),           " Cost Center
          END OF it_item.
    Data Variables & Constants
    CONSTANTS : c_x             VALUE 'X'.  " Flag
    DATA : v_l(2),                          " Counter
           v_rowno(5),                      " Row No
           v_2(2),                          " Counter
           v_rows LIKE sy-srows,            " Rows in TC
           v_field(45).                     " String
    Parameters
    PARAMETERS: p_file LIKE ibipparms-path.  " Filename
    At selection-screen on Value Request for file Name
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
    Get the F4 Values for the File
      CALL FUNCTION 'F4_FILENAME'
        EXPORTING
          program_name  = syst-cprog
          dynpro_number = syst-dynnr
        IMPORTING
          file_name     = p_file.
    Start of Selection
    START-OF-SELECTION.
    Open the BDC Session
      PERFORM open_group.
    Upload the File into internal Table
      CALL FUNCTION 'UPLOAD'
        EXPORTING
          filename                = p_file
          filetype                = 'DAT'
        TABLES
          data_tab                = i_pr
        EXCEPTIONS
          conversion_error        = 1
          invalid_table_width     = 2
          invalid_type            = 3
          no_batch                = 4
          unknown_error           = 5
          gui_refuse_filetransfer = 6
          OTHERS                  = 7.
      IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      SORT i_pr BY sno.
      LOOP AT i_pr.
        MOVE-CORRESPONDING i_pr TO it_item.
        APPEND it_item.
        CLEAR it_item.
        AT END OF sno.
          READ TABLE i_pr INDEX sy-tabix.
          MOVE-CORRESPONDING i_pr TO it_header.
          APPEND it_header.
          CLEAR it_header.
        ENDAT.
      ENDLOOP.
      SORT it_header BY sno.
      SORT it_item BY sno.
      v_rows = sy-srows - 6.
    Upload the Data from Internal Table
      LOOP AT it_header.
    Header Data
        PERFORM bdc_dynpro      USING 'SAPMM06B' '0100'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'EBAN-BEDNR'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '/00'.
        PERFORM bdc_field       USING 'EBAN-BSART'
                                      it_header-bsart.
        PERFORM bdc_field       USING 'RM06B-EPSTP'
                                      it_header-epstp.
        PERFORM bdc_field       USING 'EBAN-KNTTP'
                                      it_header-knttp.
        PERFORM bdc_field       USING 'RM06B-EEIND'
                                      it_header-eeind.
       PERFORM bdc_field       USING 'RM06B-LPEIN'
                                     it_header-lpein.
        PERFORM bdc_field       USING 'EBAN-WERKS'
                                      it_header-werks.
        PERFORM bdc_field       USING 'EBAN-LGORT'
                                      it_header-lgort.
        PERFORM bdc_field       USING 'EBAN-EKGRP'
                                      it_header-ekgrp.
        PERFORM bdc_field       USING 'EBAN-MATKL'
                                      it_header-matkl.
        PERFORM bdc_field       USING 'EBAN-BEDNR'
                                      it_header-bednr.
        PERFORM bdc_field       USING 'EBAN-AFNAM'
                                      it_header-afnam.
    Item Details
        v_l = 0.
    To add no. of rows
        v_2 = 0 .
    As the screen is showing 13 rows defaulted to 130
        v_rowno = 130 .
        LOOP AT it_item WHERE sno = it_header-sno.
          v_l = v_l + 1.
          IF v_l = 14 .
            IF v_2 = 12 .
              v_2 = 12 .
              v_l = 2 .
    From second time onwards it is displaying 12 rows only
              v_rowno = v_rowno + 120 .
              PERFORM bdc_dynpro      USING 'SAPMM06B' '0106'.
              PERFORM bdc_field       USING 'BDC_CURSOR'
                                            'RM06B-BNFPO'.
              PERFORM bdc_field       USING 'RM06B-BNFPO'
                                            v_rowno.
              PERFORM bdc_field       USING 'BDC_OKCODE'
                                            '/00'.
              PERFORM bdc_field       USING 'BDC_OKCODE'
                                                '/00'.
            ELSE.
    V_2 initialized to 12 for second screen purpose
              v_2 = 12 .
              v_l = 2 .
              PERFORM bdc_dynpro      USING 'SAPMM06B' '0106'.
              PERFORM bdc_field       USING 'BDC_CURSOR'
                                            'RM06B-BNFPO'.
              PERFORM bdc_field       USING 'RM06B-BNFPO'
                                            v_rowno .
              PERFORM bdc_field       USING 'BDC_OKCODE'
                                            '/00'.
              PERFORM bdc_field       USING 'BDC_OKCODE'
                                                '/00'.
            ENDIF.
          ENDIF.
          PERFORM bdc_dynpro      USING 'SAPMM06B' '0106'.
          PERFORM bdc_field       USING 'BDC_OKCODE'
                                        '/00'.
          CLEAR v_field.
          CONCATENATE 'EBAN-MATNR(' v_l ')' INTO v_field.
          PERFORM bdc_field   USING v_field it_item-matnr.
          CLEAR v_field.
          CONCATENATE 'EBAN-MENGE(' v_l ')' INTO v_field.
          PERFORM bdc_field   USING v_field it_item-menge.
          PERFORM bdc_dynpro      USING 'SAPMM06B' '0102'.
          PERFORM bdc_field       USING 'BDC_CURSOR'
                                        'EBAN-PREIS'.
          PERFORM bdc_field       USING 'BDC_OKCODE'
                                        '/00'.
          PERFORM bdc_field       USING 'EBAN-PREIS'
                                      it_item-preis.
          PERFORM bdc_dynpro      USING 'SAPMM06B' '0505'.
          PERFORM bdc_field       USING 'BDC_CURSOR'
                                        'EBKN-SAKTO'.
          PERFORM bdc_field       USING 'BDC_OKCODE'
                                        '=ENTE'.
          PERFORM bdc_field       USING 'EBKN-SAKTO'
                                      it_item-sakto.
    Cost Center
          PERFORM bdc_dynpro      USING 'SAPLKACB' '0002'.
          PERFORM bdc_field       USING 'BDC_CURSOR'
                                        'COBL-KOSTL'.
          PERFORM bdc_field       USING 'BDC_OKCODE'
                                        '=ENTE'.
          PERFORM bdc_field       USING 'COBL-KOSTL'
                                        it_item-kostl.
          PERFORM bdc_field       USING 'BDC_OKCODE'
                                        '=ENTE'.
        ENDLOOP.
        PERFORM bdc_dynpro      USING 'SAPMM06B' '0106'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'RM06B-BNFPO'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '=BU'.
    Call The Transaction
        PERFORM bdc_transaction USING 'ME51'.
      ENDLOOP.
    Close the BDC Session
      PERFORM close_group.
    with regards,
    Hema Sundara.

  • How to fetch the Table Control data to Customer Table(Z-Table) ?

    How to fetch the Table Control data to Customer Table(Z-Table) ?

    Hi Krishna,
    Check this sample programs
    http://www.planetsap.com/online_pgm_main_page.htm
    http://sap.niraj.tripod.com/id29.html
    http://www.sapdevelopment.co.uk/dialog/tabcontrol/tc_basic.htm
    Have a look at below links. It will help you.
    http://help.sap.com/saphelp_nw04/helpdata/en/9f/dbac5135c111d1829f0000e829fbfe/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/9f/dbac1d35c111d1829f0000e829fbfe/content.htm
    Thanks,
    Reward If helpful.

  • How to referesh the table control?

    Hi all,
    How to refresh the table control in dialog programming with the command REFRESG CONTROL provided already ?
    Rgds,
    Madhuri

    Code  like
    Refresh Control 'TC_name' From Screen 'ur_screen_no'.
    Regards,
    Alpesh

  • How to handle the table control While working with LSMW?

    How to handle the table control While working with LSMW?

    its possible in lsmw,
    Hi,
    LSMW will have a Indicator for headr and itam, i do not remember the correct field, but it will have an indicator, check the fields, there will be a single charecter lenght field, that should be the indicator, and using that we can write the logic.
    check that single charecter field, it that is X that means the header record is processed, and do the items.
    and, this is another way, try this out also
    YOu can do this in "Define Source Structures" step,
    the HEADER is defined first,
    then the DETAIL below the HEADER.
    add the fields to the structures.
    Both should have some common key field
    Please take care that the name of the common field is the same.
    Once you do this it is linked. The you have a header and item corresponding to that header. then run the LSMW as you would.
    Thanks

  • How to clear the table control?

    Hi experts,
      I have a table control in the selection screen of my program.When i enter some input values in the selection screen and execute it some process is done in the background and get a status message on the selection screen itself that the process is finished.Once this is done i want to clear all the lines entered in table control in the selection screen.Can anyone please tell me how to do this?
    Thanks.
    dp.

    Hi,
    If the table control is created using internal table , then in PBO just clear and refresh that table
    PROCESS BEFORE OUTPUT
    CLEAR itab.
    REFRESH ITAB.
    The <internal table> here should be the internal table that u use to diaply in the table control
    Regards,
    Priyanka.

  • How to refresh the table control

    hi experts,
    i used bapi to update the changes made in data of table control in modulepool.
    like i <b>changed serial number and short text of equipment</b> . <b>now when
    i simultaneously go for transaction ie02  i,e equipment change in another session with table control open in other session , and now i changed data of particular equipment number in ie02 , now when i use refresh button in table control that change should be affected.  how would be the logic for the refresh button</b>
    <b>when i use the refresh button in the table control , screen should be refreshed or filled with updated data. so what is the flow and logic for that.</b>

    example
    REPORT demo_dynpro_tabcont_loop.
    CONTROLS flights TYPE TABLEVIEW USING SCREEN 100.
    DATA: ok_code TYPE sy-ucomm,
    save_ok TYPE sy-ucomm.
    DATA: itab TYPE TABLE OF demo_conn,
    fill TYPE i.
    TABLES demo_conn.
    DATA: lines TYPE i,
    limit TYPE i.
    SELECT * FROM spfli INTO CORRESPONDING FIELDS OF TABLE itab.
    CALL SCREEN 100.
    MODULE status_0100 OUTPUT.
    SET PF-STATUS 'SCREEN_100'.
    DESCRIBE TABLE itab LINES fill.
    flights-lines = fill.
    ENDMODULE.
    MODULE fill_table_control OUTPUT.
    READ TABLE itab INTO demo_conn INDEX flights-current_line.
    ENDMODULE.
    MODULE cancel INPUT.
    LEAVE PROGRAM.
    ENDMODULE.
    MODULE read_table_control INPUT.
    lines = sy-loopc.
    MODIFY itab FROM demo_conn INDEX flights-current_line.
    ENDMODULE.
    MODULE user_command_0100 INPUT.
    save_ok = ok_code.
    CLEAR ok_code.
    CASE save_ok.
    WHEN 'REFRESH'.
    refresh : itab.
    WHEN 'NEXT_LINE'.
    flights-top_line = flights-top_line + 1.
    limit = fill - lines + 1.
    IF flights-top_line > limit.
    flights-top_line = limit.
    ENDIF.
    WHEN 'PREV_LINE'.
    flights-top_line = flights-top_line - 1.
    IF flights-top_line < 0.
    flights-top_line = 0.
    ENDIF.
    WHEN 'NEXT_PAGE'.
    flights-top_line = flights-top_line + lines.
    limit = fill - lines + 1.
    IF flights-top_line > limit.
    flights-top_line = limit.
    ENDIF.
    WHEN 'PREV_PAGE'.
    flights-top_line = flights-top_line - lines.
    IF flights-top_line < 0.
    flights-top_line = 0.
    ENDIF.
    WHEN 'LAST_PAGE'.
    flights-top_line = fill - lines + 1.
    WHEN 'FIRST_PAGE'.
    flights-top_line = 0.
    ENDCASE.
    ENDMODULE.
    PROCESS BEFORE OUTPUT.
    MODULE status_0100.
    LOOP WITH CONTROL flights.
    MODULE fill_table_control.
    ENDLOOP.
    In the screen
    PROCESS AFTER INPUT.
    MODULE cancel AT EXIT-COMMAND.
    LOOP WITH CONTROL flights.
    MODULE read_table_control.
    ENDLOOP.
    MODULE user_command_0100.
    <b>rewards point for helpful answer</b>

  • How to hide the table control column in module pool

    Dear Experts,
    Please help me on this
    I have 2 screens 9000 and 9001 . In screen 9000 I have 2 radio buttons if I select the 2nd radiobutton then the screen  9001 should display inthat some column has to be hide inthe table control. I have used this code but still it is not hiding please help me on that
    I used this code in PBO of 9001 screen
    LOOP AT SCREEN.
        IF wopr = 'X'.
          IF screen-group2 = 'ABC'.
            IF screen-name = 'ZMMT_EKKO-MATNR' or screen-name = 'ZMMT_EKKO-BANFN'.
            screen-active = ''.
              screen-invisible = '1'.
              screen-input = ''.
              MODIFY SCREEN.
            ENDIF.
          ENDIF.
        ENDIF.
      ENDLOOP.
    Even I tried this code also in the same screen 9001
    loop at tbl_rfq-cols into cols.
    IF wopr = 'X'.
    IF screen-group2 = 'ABC'.
    IF cols-screen-name = 'ZMMT_EKKO-MATNR' or cols-screen-name = 'ZMMT_EKKO-BANFN'.
    cols-screen-input = '0'.
    cols-invisible = '1'.
    endif.
    MODIFY tbl_rfq-cols FROM cols INDEX sy-tabix.
    endif.
    endif.
    endloop.

    Hi Balaji,
    To hide a column in a table control on screen.
    In the PBO of the screen, inside
    loop with control <tab_ctrl_name>.
    module modify_tab.
    endloop.
    Say for a column, you take group1 as 'ABC'.
    In this module you can use the group for the input/output fields and the display/hide them as per your requirements.
    if <condition>.
    loop at screen.
      if screen-group1 = 'ABC'. "say textbox (column for a table) has group1 as ABC
       screen-invisible = 'X'. "hide a column
       screen-active = ' '.
      endif.
      modify screen.
    elseif <condition>.
    loop at screen.
      if screen-group1 = 'ABC'. "say textbox (column for a table) has group1 as ABC
       screen-invisible = ' '. "display a column
       screen-active = 'X'.
      endif.
      modify screen.
    endif.
    Similarly, you can use this code for other columns also.
    Hope this solves your problem.
    Thanks & Regards,
    Tarun Gambhir

  • How to extend the table control of ME22N ?

    Can somebody tell how to add a field to the tablecontrol of ME22N ? I think that it is not possible to do it via classic enhancements (ME22N). I suppose the wright way is via an BADI. But how, which one, adding the field via an ci-include via customizing or how ? How of you has experience with this issue and will help me by replaying.
    Thanx in advance folks.

    Hi,
    User-exits are not the best solutions for the Enjoy transaction.
    You have to look for BADIs instead of exits.
    To search BADi go to customizing (SPRO transaction) - Material Management - Purchasing - Business Add In for purchasing - Enjoy...
    Here click on the documentation icon.
    Use the following transaction to hadle BADi-s: SE19
    Use the following transaction to handle classes: SE24
    You have to create an instance. Always copy the instance from the original and add a "Z" letter befor it.
    You have to copy all relevant objects from its original (FM-s, etc) and write the modifications into it.
    This is very "deep water" will took a long time until you will be finished
    Regards
    Sudheer

  • Regarding the table control in bdc

    Hi Abap Gurus,
    my requirement is how to extend the table control in bdc? i have searched in the sdn but not found the proper code.
    i think we have to use the =P+ code .  if possible post the sample code.

    Use the search tool, or go to [How to scroll a table control?|http://wiki.sdn.sap.com/wiki/display/ABAP/BatchInputFAQ#BatchInputFAQ-Howtoscrollatablecontrol%3F] in [Batch Input FAQ |http://wiki.sdn.sap.com/wiki/display/ABAP/BatchInputFAQ] (not every transaction uses the same code)
    Regards,
    Raymond

  • How to Bring IT0008 table control in HCM P&F

    Hi :
    I have a requirement of adding IT0008 table control in my HCM form which will contain the following fields:
    I0008_LIN_ANZHL
    I0008_LIN_BETRG
    I0008_LIN_EINHT
    I0008_LIN_EITXT
    I0008_LIN_INDBW
    I0008_LIN_LGART
    I0008_LIN_LGTXT
    I0008_LIN_OPKEN
    I0008_LIN_PERNR
    I0008_LIN_WAERS
    I am using structure HCMT_BSP_PA_XX_R0008_LIN_A ,
    but my question is how to create the table control in form? How to add multiple rows and How to default wagetypes in the form?
    Pls advise
    Sinchan

    we have discussed the same scenario in the note 1043692
    PLease go through the steps it should help you

  • Disable the table control

    Hi all,
    How to disable the table control. User cant enter anything to the table control. Code pls
    thks

    hi,
    in screen flow logic make new module disable....
    PROCESS BEFORE OUTPUT.
    *&SPWIZARD: PBO FLOW LOGIC FOR TABLECONTROL 'TAB1'
      MODULE tab1_change_tc_attr.
    *&SPWIZARD: MODULE TAB1_CHANGE_COL_ATTR.
      LOOP AT   itab
           INTO itab
           WITH CONTROL tab1
           CURSOR tab1-current_line.
        MODULE tab1_get_lines.
        MODULE disable.
    *&SPWIZARD:   MODULE TAB1_CHANGE_FIELD_ATTR
      ENDLOOP.
      MODULE status_1000.

Maybe you are looking for