How to renumber the position-No of a quotation

Hi,
i have create a quotation (VA21) with two position (10, 20).
Next i change the quotation (VA22) with a new position (15). I take 15 because i will get it
between 10 an 20. Than i save it.
Is it possible to renumber the position to 10, 20, 30 (old 10, 15, 20).
Thanks.
Regards, Dieter

Dieter Gröhn wrote:
> Now they want to renumber 10, 15, 20 25, 27, 30 to 10, 20, 30, 40, 50 because this looks better
> in the sapsciptformular.
Dieter, if this is the only reason, then this can be done in the formular itself. Instead of printing POSNR directly, just create an internal variable, calculate the "pretty" position number and print it instead. Or, if you want to take it a step further, you can even read the configuration (in case it's changed in the future), so that you won't have to hardcode 10+10. It is very easy to do (for an ABAPer, anyway).
If you're using a standard formular, you'll need to create your own copy, but it's much simpler anyway than trying to bend the system. And I'd switch to the Smart Form actually, given the opportunity.

Similar Messages

  • HELP!! How to get the position of active windows in the desktop

    How to get the position of active windows in the desktop

    You mean, active windows other than the program you're running, or windows the program puts there? And a real desktop (like where MyComputer is), or a desktop pane?

  • How to change the position of a window created in the script?

    Hello to all
    A window called from another window are the same size. How can change the position of the window relative to the caller call window?

    That is worked, but for abs.coord. How make releative coord.?
    When I include that in my script, window show without elements ! See attachments №2

  • How to copy the  positions and their relationships of one org.unit to other

    f there about 20 organization units among which 6 org.units have same positions and same relationships ,i know that we can create one org.units and their relationships among 6 similar org.units and then copy the same position and relationships to other 5 org.units as well instead of individually creating positions and assigning relationships to them  which results in wasting a quality time.but i dont know how to copy it? so please help me by informing me in details how to copy the positions n their relationships to other org units.

    Hi.
    This may sound like a bit of a pain in the *** but why not save the channel strip settings into your own folder then that way you can open them up in other songs and you have some channel strips to try out when you cant find anything else to fit. Plus its fun to open up lots of different audio onto the tracks and see what the effects sound like, Brian Eno style.....
    Hope this helps

  • How to fix the position of table columns.

    Hay all,
    Can anybody tell me that how to fix the position of columns in a table.By default the columns can be moved to any position in the table.
    Regards,
    Sharad Agarwal

    table.getTableHeader().setReorderingAllowed(false);this will do...
    Regards,
    Byju

  • How to fix the position of different component?

    Hay all,
    Can anybody tell how to fix the position of any component so that they cant be moved from there initial positiion
    Regards,
    Sharad Agarwal

    Set layout to null and set bounds of the component to whatever you like.

  • How to Change the position of Column in ALV report

    Hi Follks,
        Is is possible to change the position of column in ALV report?.If yes then how?
        Basically my requirement is, that user want afacility where , he should be able to change the position
        of column aftre he runs the report.
        Eg: After running the report , user felt that column 5 should be at position 2 , in that case he should   
               be able to drag column 5 at position 2 and vice versa.
        Please help me, how to solve this issue.
        Note : I am using NW 7.0 SP 9
        Regards
        PG
    Edited by: PG on Apr 13, 2009 11:10 AM

    HI PG,
    do below whie filling the filed catlog
    wa_fieldcat-fieldname        = 'Field1".
    wa_fieldcat-COL_POS = '1',
    append wa_fieldcat to it_fieldcat.
    wa_fieldcat-fieldname         = 'Field2".
    wa_fieldcat-COL_POS = '2',
    wa_fieldcat-fieldname         = 'Field3".
    wa_fieldcat-COL_POS = '3',
    Thanks!

  • How to set the position in SAP Script

    Hi Professionals,
    Can anyone tell me that How can I set the position of an bitmap Image (after inserting) in SAP Script ?
    by default position is in Left, I need to align it in center or somewhere else.
    Anybody knows, kindly reply!
    Thanks
    Devinder

    Hi,
    But Can we assign a window under another window. Because I want to insert a bmp picture on particular position.
    example:- there is a digital signature and wanted to insert upon a name.
    So, there is a text (which is customer name) and digital signature (in bmp picture format) upon it.
    Thanks
    Devinder

  • How to get the position of a selected cell in a table ?

    Hi,
    How can I get the position of a selected cell in a table or in a list multicolumn cmd ?
    Thanks.

    Invoke node >>> point to Row Column
    Ben
    Message Edited by Ben on 07-19-2007 03:14 PM
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction
    Attachments:
    Point_To_Row_Column.PNG ‏22 KB

  • How to get the position of a selected cell in a table without using the mouse event?

    Dear All,
        I have a question about table:After clicking the cell of a table, the cell is into the edit status. How to know the row number and column number of the cell, when I click a button?
       The link below is using the mouse down event:
       http://forums.ni.com/ni/board/message?board.id=170&message.id=260102&query.id=55917#M260102
       Is there any other way to do it? Having tried to using the "edit position"  property, but it seems not working well.
       Thanks for any suggestion.
    Hugo 
    Attachments:
    table.vi ‏17 KB

    It works well with the "edit position" property.
    See attached
    Attachments:
    table.vi ‏12 KB

  • How to adjust the position of an image in a full screen slideshow

    Hi I'am using a full screen slideshow composition on my page and muse is not letting me adjust the position of the image to the top, middle or bottom of the frame under the fill option when the image is selected in the slideshow.
    I also find it very buggy when previewing the page in a browser, some time it re-sizes the image only larger but never scales down proportionately, only on rare occasions. Why does this happen? 
    Can someone please help ASAP I need to get this site done by tomorrow.
    Thanks,
    Gary

    Welcome to Apple Support Communities.
    The effect you're looking for is 'Scale'
    In Keynote '09, 5.1.1 select the graphic.
    Click Inspector in the tool bar, Build Inspector (3rd icon from the left), (Build In and Build Out are both set to None for this step) Effect, Action, and then Scale.
    It rescales ('zooms') the selected item (image) up or down from 0% to 200%
    Clicking on the More Options button at the bottom opens a drawer to the left, and gives you more control over how the build occurs, whether they happen automatically, timed, or when you click, and re-order build steps.
    At 200%, double the original size, resolution could be a problem. There is a workaround, because it also scales smaller, down to 0%. So I would scale the graphic down 'small' as the first step to fit at the bottom, (even hide it behind a background-colored box) as you scale it down, and then at the end, scale up to full size to fill the screen at 'normal' resolution.
    In the attached example, I use a 'scale' up to go from 100% to 130% on a map, and use arrows and a flashing line to point out the road where a specific business is located with 12 steps. Some elements in my slides have been intentionally obscured. For simplicity, I've eliminated showing any steps but the initial title and the scale.

  • How to get the position of the stem in control valve using slider control in the front panel

    I have created a calibration program for a control valve. Signal (4-20mA) is generated from labview using slider contorl which is given to the valve via DAQ(module 9265) and again the feedback signal from the valve is acquired using DAQ(module 9203).. . There is an input ISO/ISC(Increasing signal to open/ Increasing signal to close) in the front panel.
    ISO would set the output to increase from (4-20)mA further opening the valve
    ISC would set the output to increase from (4-20)mA further closing the valve
    I have doubt, how can i get the position of a stem

    Ravens Fan wrote:
    If the position of the stem is being sent to the PC through a 4-20 mA signal into your DAQ 9203 module, then you just need to do an analog input read in order to get the signal.
    When reading this post, that is what came to mind...  So let's see if both RavensFan & I are trying to understand the same thing...  Are you saying that the position of the stem is linear (or scaled) to the amount of current sent to it?  Meaning a 4mA signal would move it a certain distance, and 10mA would move another given / known distance?  Or are you saying that it is calibrated so that a 20mA signal for a certain duration (ms) would move it a given distance? So the scale would be time and not current unless a lookup table is used to adjust the time duration based on the current being drawn...
    It's just that I am not familiar with solenoid / drive devices that related to current..  To voltage, yes.  To time, yes..  To current, I'm simply saying that I am not familiar with that.  Can you tell us more about this stem (mfg / model designation)?

  • How to lock the position of text in XML RTF

    Hi Experts,
    I am working in XML Publisher reports. I am working on invoice report, i have following issue.
    RTF:
    <?for-each:headergroup?> --header
    <?header-data1?> <?header-data2?>
    --inside table
    <?for-each:linegroup?> --lines
    <?line-data1?> <?line_data2?>
    <?end for-each?> --lines
    --end of table
    <?Total?>
    <?end for-each?> --header
    **My requirement is, if i get more line data, it will push the <?Total?> to next page, but i want to fix the position of <?Total?> at same place. if line data is more, just lines should go to next page,but <?Total?> should be in the same position.**
    Kindly help.
    Thanks in advance.

    Hi,
    Thanks for your reply. Actually my requirement is, i have 2 page template.
    RTF:
    page1
    <?for-each:headergroup?> --header
    <?header-data1?> <?header-data2?>
    --inside table
    <?for-each:linegroup?> --lines
    <?line-data1?> <?line_data2?>
    <?end for-each?> --lines
    --end of table
    <?Total?>
    <?end for-each?> --header
    page2
    SOME DESCRIPTION IS THERE RECORDING INVOICE
    Output Using above RTF:
    Page1:
    header-data1 header-data2
    line-data1 line-data2
    Total
    Page2:
    Description.
    page 3
    header-data1 header-data2
    line-data1 line-data2
    Total
    page 4:
    Description.
    After each header and line info, it will print Description.
    Till now it's perfect.
    Requirement: In first page, i need to have a footer, no footer in second page.
    For this, i put a section break in page1, now there is no footer in page2.
    But the output is coming like below.
    page1:
    header-data1 header-data2
    line-data1 line-data2
    Total
    page2
    header-data1 header-data2
    line-data1 line-data2
    Total
    page3
    header-data1 header-data2
    line-data1 line-data2
    Total
    page4
    Description.
    After keeping section break, it's not printing the DESCRIPTION after header and line info page.
    Could somebody help me, how to achieve the DESCRIPTION after header and line info with no footer on second page.
    Kindly help.
    Thanks in advance.

  • How to renumber the pages in pdf

    I've created a 380-page combined pdf document - how can I renumber the pages from 1 to 380?

    Hello,
    Please refer to following link:
    Acrobat Help | Rotate, move, delete, and renumber PDF pages
    Regards,
    Anoop

  • How to  Change the position of Roles

    Dear Experts,
    I have a requirement in which I have to change the position of the roles.
    How to achieve it, Please Suggest.
    Warm Regards,
    Upendra Agrawal

    HI Upendra,
    Follow the below process to re-arrange the roles as per your requirement:
    1. From the Portal Catalog, right-click a role or workset and choose Open ® Object. The role or workset is loaded into the appropriate editor.
           2.      In the displayed editor, select either:
       The root node of the role or workset hierarchy
      A workset or folder within the role or workset hierarchy
      A folder within a workset of the role or workset hierarchy
           3.      In the Role/Workset Editor, click Properties to display in the Property Editor the properties of the object that you selected.
           4.      From the Property Category dropdown list, choose Navigation.
           5.      In the property list, scroll to the Sort Priority property and enter a numeric value.
           6.      Click Save.
    In the same way, assign values to all of the navigation nodes that you want at specific locations in the portal navigation hierarchy.
    Hope it helps.
    Regards,
    Gourav.

Maybe you are looking for

  • ECC & PI on same Server

    Hi All,      Hardware Server u2013 4 x 4 cores RAM u2013 64 GB HDD u2013 6 TB OS u2013 Win 2K8 R2 DB u2013 SQL Server 2K8 R2    System Landscape SAP SRM 7.0 SAP ECC IDES 6.04 SAP MDM 7.1 SAP CE 7.2 SAP NW EP 7.01 SAP NW PI 7.1 EHP1 Now we are facing

  • Can someone explain this !!

    Really it's amazing ! When I bought my E71 about 4 months ths ago ,and as I was upgrading from S40 series ,I found it a little bit slow , of couse compared to other N series like N73 it was much faster. For some issues , I decided to hard reset the d

  • ATI Catalyst Control Center is not loading with the latest drivers. Help!!!

    I have installed latest ATI drivers from Lenovo 8.712. After that ATI Catalyst Control Center is not loading. The icon is present, when I click display properties. But when I click it, nothing happens. How can I downgrade to the previous version? And

  • Compiling symbols as library

    I would like to compile an swf/library with multiple MovieClips/Sprites that I could then use from another swf by just passing references. It seems that this is not possible with Flash 8 because you cannot reinstantiate movieclips in other .swfs to d

  • Usage dependency - context

    Hi, in my current project I need to distribute CRM businesspartner information using XI. The business partner data in CRM has been enhanced with customer specific fields which obviously also need to be sent. I'm planning on creating my own SWCV which