How to replace the virtual system as the real system in the TMS?

Hi,
I have a standard 3 systems TMS, which is 1 development system (real system, transport domain) and 2 virtual system(QAS and PRD).
And now, I will install the QAS system and replace the virtual system as the real one, How can I do in TMS?
I should delete the old TMS and rebuild the TMS with 1 DEV, 1 QAS and 1 virtual PRD? or just replace the QAS as the real one? What the operation should I do in t-code:STMS?
Many thanks.
BR,
Randy

Hi,
Do it as follows.
1. Remove transport routes (i think it is not mandatory)
2. Remove your Virtual system that you want to replace with physical system
3. Include the Physical system into Domain and accept it from Domain Controller
4. Configure the transport routes.You can see all the transports that were in the import queue of virtual system are now in the import queue of the Physical system that you added.
Only condition is, both Virtual System and Physical System should have same SID.
All the above will be done through STMS
Thanks,
Giri

Similar Messages

I added Maukie the virtual cat now everytime i open up the browser it keeps downloading so took the add on off but now its still downloading 40 times in all

I would like to know how i can get it out of my downloads folder. I have deleted from my folders over and over again but is still downloading each time i open up my browser. I have even thought of uninstalling Firefox and then re-installing but would that get rid of it.
Please help

See these articles for some suggestions:
* https://support.mozilla.com/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
* https://support.mozilla.com/kb/How+to+set+the+home+page - Firefox supports multiple home pages separated by '|' symbols
* http://kb.mozillazine.org/Preferences_not_saved
You can also check the download manager for unfinished files.
* Firefox Downloads or Tools > Downloads
It is possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
Delete the files sessionstore.js [2] and sessionstore.bak in the Firefox Profile Folder.
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
* http://kb.mozillazine.org/Profile_folder_-_Firefox
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.
Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost, so you will have to create them again (make a note or bookmark them).
See also:
* [1] http://kb.mozillazine.org/Session_Restore
* [2] http://kb.mozillazine.org/sessionstore.js

How do I get in touch with a real person on the phone?

I need to talk to someone at ADOBE on the phone.
I can't open a downloaded ebook in digital editions. It is in my "download" folder as an acsm file but when I go to open it digital editions says "cannot connect to the fulfillment server".
I have tried "unblocking" the file, turning my antivirus and firewall off, I can't control, shift + U to change or reset authentication.
I would very much like to talk to someone.

There is no phone support for itunes.
"Real" people answer the e-mail and express lane inquiries.
Click Support , then click Contact Us.

Virtual Machine could not be started because the hypervisor is not running

Hi
I have installed Windows Server 2012 Standard Edition with a GUI. Default configuration, nothing special.
Whenever I want to turn on any machine inside of Hyper-V, the following error message appears:
"Virtual Machine could not be started because the hypervisor is not running"
Whenever this happens, I run the following command:
bcdedit /set hypervisorlaunchtype Auto
and reboot the Server. After a reboot, all Virtual Machines can be started without Problems. However, as soon as I shut down the Server instead of rebooting it, the Problem happens again and I need to enter the command again and reboot.
Now my question is how to solve this Problem. I never had this Issue with Windows Server 2008 R2, maybe there are some differences regarding the Hypervisor in Server 2012. How can I make sure the Hypervisor is always on, even after a Shutdown? Thanks in
Advance

Hi,
Please check whether you have event log with ID 3112.
Hyper-V requires hardware support, including: an x64 CPU; VT (Intel) or AMD-V (AMD) hardware extensions; No eXecute (NX)/eXecute Disable (XD) and full BIOS support for hardware virtualization.
Check if the computer meets the hardware requirements, use the appropriate utility for your CPU manufacturer.
If the computer meets the requirements for Microsoft virtualization software, see the video titled
Hypervisor is not running error: How to fix
, which demonstrates how to change the system BIOS on a computer to enable support for virtualization. Make sure DEP and CPU virtualization is enabled in BIOS. (http://go.microsoft.com/fwlink/?LinkId=163578
Also, check that
Boot Configuration Data (BCD) store is set to start the hypervisor, and then restart your physical computer.
The BCD store contains boot configuration parameters and controls how the operating system is started in Windows Vista and Windows Server 2008 operating systems. These parameters were previously in the Boot.ini file (in BIOS-based operating
systems) or in the nonvolatile RAM (NVRAM) entries (in Extensible Firmware Interface-based operating systems).
You can use the Bcdedit.exe command-line tool to update BCD store with the correct launch options as referenced in the error, and then restart the server. Bcdedit.exe is located in the \Windows\System32 directory by default.
For more information please refer to following MS articles:
Event ID 3112 — Hypervisor Operation
http://technet.microsoft.com/en-us/library/dd581879(v=ws.10).aspx
You receive the error message "virtual machine could not start because the hypervisor is not running" in Windows Server 2008 or Windows Server 2008 R2
http://support.microsoft.com/kb/2490458
Troubleshooting Event ID 3112 "The virtual machine could not be started because the hypervisor is not running."
http://social.technet.microsoft.com/wiki/contents/articles/194.hyper-v-troubleshooting-event-id-3112-the-virtual-machine-could-not-be-started-because-the-hypervisor-is-not-running.aspx
Lawrence
TechNet Community Support

Connecting external computer to the virtual environment

Hi,
I am using Windows Server 2012 - Hyper-V Host with 2 virtual instances inside, VM1 and VM2. The VM1 role is RRAS server and VM2 is a Database server. The remote users connect to RRAS server (through PPTP VPN) to be able to access the Database server.
I wanted to add a physical server (Linux) and configure and connect it in same segment as the VM2 or Database Server.
My question is how will I connect the Physical Server to the virtual network so that users will use the same RRAS server to access the Linux Box.
Appreciate your help.

Hi Sharon,
As you mentioned , remote users can connect to VM1 (RRAS) to be able to access VM2 (Database server) .
I assue that VM1 has Two virtual NICs , first one for "remote connection" and the second one for connecting to VM2 .
If you want the remote users to access a physical server to replace VM2 , you may try to connect the second virtual NIC of VM1 to an external virtual switch that connecting to your physical LAN .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Console shows web application deployed to server but not to the virtual host yet things still work, huh?

I finally figured out how to get the virtual hosting piece to work in
wls811. Now I have a question about the console presenting me with some web
app information. The Web Application Modules node and the Deploy tab shows
me the application is deployed to the server and it's Active, however the
console indicates the web app is not deployed to the virtual host and is
inactive. But the server is resonding to requests for each of my Virtual
Host Names, so they must be deployed to the virtual hosts as well.
Anyone with some ideas? Thanks.

do you see any deployment exception in the server.log ? if nothing please post the web.xml and sun-web.xml

SCVMM Virtual Switch Provisioning ignores "Inherit settings from the physical management adapter" setting

When provisioning a new Hyper-V hosting into SCVMM I have a situation occur that causes loss of management to the server, which really should not be happening. When I add a new host, I set the 'Virtual Switch' adding a new 'Logical Switch' as well as a 'Virtual
Network Adapter' for the management OS traffic.
The first NIC in the team is active and configured with correct static IP information, which is allowing VMM access to the server to perform these steps. The 'Virtual Network Adapter' has a checkbox in the 'This virtual network adapter inherits settings
from the physical management adapter.' option box.
From my understanding what should happen is when the virtual adapter is created on the host the IP information should move to the virtual adapter from the physical adapter that is now part of the NIC Team. What is actually happening is the NIC Team seems
to create OK, but it picks up a DHCP IP address instead of assuming the first physical NIC's IP information. I tried this with only one NIC as well as both NICs in the team to see what happens. Either case the same problem presents.
To get around this, what I did was sit on the console after I started the provisioning process. As soon as I saw Teamed NIC create I applied the static IP address via PowerShell manually to that Teamed NIC virtual adapter and then VMM just continued along
normally. It then moving the IP from the NIC Team adapter to the Hyper-V virtual adapter properly. I did get a warning back from the creation (below) which hints me to the problem.
The Error code details as 2147942465 which is a "Network Access Denied" code followed by "Error while applying physical adapter network settings to teamed adapter". So, this is telling me there was a permission issue of some sort during
the step of adding the original physical NIC IP settings to the virtual NIC.
The VMM Run As user 'HVAdmin' is a Local Administrator on the Hyper-V host, this has been verified. It has also been temporarily granted Administrator access on the domain to see if it helps. No go.
Searching around the net has now revealed this problem so far, has anyone else seen this? It makes provisioning a bit of a chore because I have to be at the Hyper-V console and on VMM at the exact same time to add a new host.

It's a workaround but this works best.
When initially configuring the host use a dedicated Nic.
Configure the new team with a management Vnic and assign the Vnic an IP.
Now disable the dedicated nic and you can start working the the team and the Vnic.
Gil Gross | Technical Lead | G-Net Network Solutions | www.g-net.co.il | plz visit my blog - gilgrossblog.wordpress.com

SCVMM R2 Hangs on removing vmguest.iso from the virtual DVD drive

In addition to dealing with the "INCOMPLETE VM CONFIGURATION" (bug) in SCVMM R2 (which is cleared only with a complete reinstall of the software and database), I have come across a new problem.
1. Find a machine with vmguest.iso in the virtual dvd drive.
2. Change the drive to "No Media"
3. Click "OK"
SCVMM HANGS.

Hi Sir,
Sorry for the delay .
"SCVMM Hangs " happens on all VMs ?
Any operation of VM performed in VMM will case this issue ?
Did you install newest update rollup for VMM server ?
As for this issue , you may try to remove that hyper-v host then re-add it into VMM to check the result .
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Windows 8 Hyper-V - Virtual Machine Management Service failed to start the virtual machine

I have Hyper-v running on Dell Precision T3600 with Windows 8 OS. I am trying to start a VM (called Windows8VM) to install Windows 8 in the hyper-v virtual machine, but I keep getting the following message:
"Windows8VM" failed to start.
Failed to start the virtual machine "Windows8VM" because one of the Hyper-V components is not running.
"Windows8VM" failed to start. (Virtual machine ID D670D3BB-9AE2-0453D-9191-EA6EFC242A9C)
The Virtual Machine Management Services failed to start the virtual machine "Windows8VM" because one of the Hyper-V components is not running.
I have turned the hyper-v feature on in the "Turn Windows feature on or off. The BIOS has virtualization enable. Help!!! driving me nuts for a week now.
Nick :(

Okay, I turned off hyper-v, went to bios and enabled Intel TXT(LT-SX) Configuration. Made sure that both Virtualization and VT for Direct I/0 are on. Next, I turned on Hyper-V and I create a brand new Virtual Machine call Windows8 and had
the DVD point to Windows8 ISO file on hard drive. When I clicked on start, it stayed in the Starting status mode for about 5 minutes. Then of course it failed. I looked at the Hyper-V-VMMS log and here is what it output:
Log Name: Microsoft-Windows-Hyper-V-VMMS/Admin
1) Error: The virtualization infrastructure driver (VID) is not running.
2) Info: Found a certificate for server authentication. Remote access to virtual machines is now possible.
3) Info: Successfully started the Virtual Machine migration connection manager.
4) Info: Virtual Machine Management service is started successfully.
5) Info: The WMI provider 'VmmsWmiInstanceAndMethodProvider' has started.
6) Info: The WMI provider 'VmmsWmiEventProvider' has started.
7) Info: The WMI provider 'VmmsWmiInstanceAndMethodProvider' has started.
8) Info: The WMI provider 'VmmsWmiEventProvider' has started.
9) Info: The Integration Services Setup Disk image was successfully updated.
10) Error: The virtual machine bus is not running.
11) Error: 'Virtual Machine Bus' driver required by the Virtual Machine Management service is not installed or is disabled. Check your settings or try reinstalling the Hyper-V role.
12) Error: 'Storage Virtualization Service Provider' driver required by the Virtual Machine Management service is not installed or is disabled. Check your settings or try reinstalling the Hyper-V role.
13) Error: The Virtual Machine Management Service failed to start the virtual machine 'Window8' because one of the Hyper-V components is not running (Virtual machine ID 2B393AF4-7B7E-4243-805B-23C09D20F4FB).
14) Error: 'Window8' failed to start. (Virtual machine ID 2B393AF4-7B7E-4243-805B-23C09D20F4FB)
Nick

STMS Configuration - Change Virtual System with Real System

Dear all,
My system, if I go in the transaction STMS in DEV system, was configureted in the following way:
DEV => QA => PROD (Virtual System)
Now, I want to change the PROD Virtual System in PROD Real System.
How Can procede?
Can you explain step-by-step the process?
Because the system was configureted from other people, and I'm new to using the STMS.
Thanks in advanced for your help.
Best Regards,
Giulio

Hi,
After the planned system is physically installed it is time to replace the Virtual System with the realized system.
The procedure for the same is as under:
1) Delete the Virtual System from the transport domain
. Login into Transport Domain system client 000
· Using STMS got to Overview=> Systems
· Chose SAP Virtual System=> Delete (confirm)
· Distribute configuration change.
As soon as the configuration change is distributed, the virtual system is deleted. The import queue for this system in TMS disappears but it is available as import buffer at the operating systems level.
Now add the new (physical system) to the transport domain:
If STMS is configured as standalone system then first delete STMS configuration on PRD system
login into PRD system client 000. (delete STMS configuration if present.)
run stms -> it's ask for set up STMS -> click on other configurition (F6)
Target Host -> host name of domain controller ( host name of transport domain system)
System number -> Instance number of domain controller ( instance number of transport domain system)
Now,
Go to the Transport Domain Controller and accept the system. (As the import buffer is available at the operating system level, no change requests will be lost)
Distribute the configuration changes.
regards,
kaushal

How to add an virtual disk device

I remember i have seen one doc describe how to add an virtual disk device in solaris system, but I forget it now, can somebody help me?

not sure what you are trying to achieve...
However you should not be referring to Luns via their logical device i.e. c0t0d0, but using the unique did device or the /global device. refer to scdidam -L which will list all the did devices across all nodes and map them to the logical device path.

LIVE Video Tutorial! How to Replace and Configure a Video Card - HP Expert Day "How-To" Video Series – Today at 1:00pm PST

Join us at 1:00pm Pacific time for a LIVE video tutorial of how to replace a video card and configure video settings! The video features HP experts who work with the products every day!
I am an HP employee.

#test

Deleted the public/private keys installed by iPCU & untrusted the certs

Hi;
it's early in the morning and i couldn't quite figure what was going on
when:
- new public and private keys "appeared" in keychain
- a certificate was installed almost as soon as a plugged
an iphone in while running iPhone Config Util (iPCU i now
realize)
From the console:
Tue Jun 30 02:39:45 unknown mcmobiletunnel[363] <Warning>: added object <NSCFType: 0x1073d0> to keychain as iPCUHost-D3FA2B23-E0D0-4C42-A48B-DFXXXXXXXX-HostCert success 1 error 0
What it looks like is on connecting the iPhone "phoned home" and snagged a certificate and public and private keys to install on my MacBook Pro.
I deleted these not realizing who iPCUHost was (an earlier cert was marked as untrusted on a pass trhough my certs earlier).
OK: so *how* do i recreate the public/private keys? the Certificates in Keychain?
Tried: downloading and re-installing iPCU
Tried: Time Machine to earlier version if iPCU & using Software update to Update.
This is where things look unhappy in the iPCU console:
Tue Jun 30 03:42:36 unknown mcmobiletunnel[432] <Warning>: received request 4: (\n RequestType\n), keys {\n RequestType = GetProfileList;\n}
Tue Jun 30 03:42:36 unknown mcmobiletunnel[432] <Warning>: processing request 4: ((\n RequestType\n))
Tue Jun 30 03:42:36 unknown mcmobiletunnel[432] <Warning>: sending reply {\n OrderedIdentifiers = (\n );\n ProfileManifest = {\n };\n ProfileMetadata = {\n };\n Status = Acknowledged;\n}
Tue Jun 30 03:42:36 unknown mcmobiletunnel[432] <Error>: receive_message: Could not receive size of message: 0 Operation not permitted
Tue Jun 30 03:42:36 unknown mcmobiletunnel[432] <Warning>: received request 4: (null), keys (null)
Tue Jun 30 03:42:36 unknown mcmobiletunnel[432] <Error>: main: Could not receive request from host.
Tue Jun 30 03:48:21 unknown /usr/libexec/notification_proxy[426] <Error>: Could not receive size of message
Tue Jun 30 03:48:21 unknown /usr/libexec/notification_proxy[426] <Error>: Could not receive message
Tue Jun 30 03:51:02 unknown mcmobiletunnel[446] <Warning>: received request 4: (\n RequestType\n), keys {\n RequestType = GetProfileList;\n}
Tue Jun 30 03:51:02 unknown mcmobiletunnel[446] <Warning>: processing request 4: ((\n RequestType\n))
Tue Jun 30 03:51:02 unknown mcmobiletunnel[446] <Warning>: sending reply {\n OrderedIdentifiers = (\n );\n ProfileManifest = {\n };\n ProfileMetadata = {\n };\n Status = Acknowledged;\n}
Tue Jun 30 03:51:02 unknown mcmobiletunnel[446] <Error>: receive_message: Could not receive size of message: 0 Operation not permitted
Tue Jun 30 03:51:02 unknown mcmobiletunnel[446] <Warning>: received request 4: (null), keys (null)
Tue Jun 30 03:51:02 unknown mcmobiletunnel[446] <Error>: main: Could not receive request from host.
Thx
Jim

I'm in the same situation here. While trying out the iPCU, I noticed my test devices were showing up with a certificate of "iPCUHost...". I was hoping to replace this default cert with one from our own CA, and in the process of messing around I tried deleting all of those certs from my Keychain. They deleted just fine, and after a sync the cert also disappeared from the connected iPhone. Unfortunately, there is no obvious way to replace that cert and as of now, I cannot install any profile to the device that has had the cert removed. If I select the device and click "Install" on a profile, nothing happens... no errors, no console messages, it just does nothing.
I'm not quite sure how to replace the missing cert, and in particular how to replace it with one of our own rather than the default. Surely we don't have to actually develop a web service just to install certs... (see page 21 of the Enterprise Deployment Guide)
-mike

Mac App Store needs real System Requirements for Games

After reading about the 2011 Apple Design Awards I decided to download Anomaly: Warzone Earth from the Mac App Store. The system requirements listed are "Mac OS X 10.6 or later".
My 2006 MacBook Pro runs 10.6.7 fine, so I thought I would be able to play, but my 2 GHz Intel Core Duo, 2 GB ram, and ATI X1600 graphics card are apparently nowhere near fast enough to actually play the game. Sure, the app launches, but the menu interface is jerky and the actual gameplay is completely unplayable. Instead of even laggy lo-res graphics, the screen is just a blank grey field with no visuals.
If the App Store told me more specifically that a faster graphics card, more video memory, or a faster processor were required to play, I would have not bought the game (or at least waited until I upgraded my computer).
I was tempted to try the game on my Windows 7 partition via Bootcamp (since Windows seems to have better graphics drivers and can often run the same games faster) but I don't feel like shelling out more money for another version that likely won't run.
TL;DR
I wish the Mac App Store listed real system requirements, instead of just assuming that nobody would keep using the same computer for five years.

You can provide feedback to Apple.
http://www.apple.com/feedback/macosx.html
When you have problems with an app, contact the developer.
http://forum.anomalythegame.com/faq.php?sid=277ee1b7adde841196aef0556bcc0461

HT201250 I had to replace the hard drive in my old MacBook. I replaced it. Installed OSX10.6. Then using the system software I reinstalled data from my Time Machine backup. On completion it asked for my password. It is not accepted. I am locked out how I

I had to replace the hard drive in my old MacBook. I replaced it. Installed OSX10.6. Then using the system software I reinstalled data from my Time Machine backup. On completion it asked for my password. It is not accepted. I am locked out how I overcome this?
I was already using 10.7. But only had the disc for 10.6.

Sorry I am new to this. Am I in the right area? I am using my iPhone to make contact. I am worried.

How to replace the virtual system as the real system in the TMS?

Similar Messages

Maybe you are looking for