How to request acknowledgments for Enterprise services

Hi Experts,
We are using enterprise services for our outbound interfaces in retail system, how do we request acknowledgements for these messages, is there any setting we need to make???
we are not using any custom proxy programs, these are SAP standard programs, if anyone done before please let me know

Hi,
At this moment I don't think you can do that. I think that the philosophy is that once the service call was succesfull you shoul safely assume it went ok. you could probably create a scenario that once the receiver system generates an ack it is routed back somehow.
if you want it for an inbound interface (sending towards ecc) I think you need some custom code

Similar Messages

How do i configure REGISTRY for enterprise services

Hi,
Please let me know how to Configure Registry for enterprise services in SAP Discover system V2.
Regards,
Naveen

I'm afraid it's a bit more complicated than adding a server into the list in Step 3 :)
When a DirectAccess client is connecting into a corporate network that is IPv4 (I assume yours is, most are), it can reach into your IPv4 servers because the DA server is doing NAT64/DNS64 translations, turning all of your DirectAccess IPv6 packets into
IPv4 packets before they head inside the network. But even though this happens in the background without you really knowing about it, the key thing there is that all DirectAccess traffic is IPv6. This means the clients can only be contacted via IPv6. If you
have IPv6 inside your network, then you can route outbound fairly easily to your DA client computers. If you are all IPv4 inside as most companies are, then you have to either roll IPv6 out inside your network, at least partially, or you have to utilize ISATAP
inside your network in order to create a sort of "virtual IPv6 cloud" that runs on top of your IPv4 internal network. This enables your internal management systems (like the BMC servers and helpdesk computers for RDP access outbound) to have a connection
into the IPv6 world, which then enables them some routing capability to get out to the IPv6-connected DA clients. In addition to this IPv6 or ISATAP setup, you also need to configure WFAS rules on the DA clients so that they will allow this traffic.
There is some info on setting up ISATAP here: http://blogs.technet.com/b/jasonjones/archive/2013/04/19/limiting-isatap-services-to-directaccess-manage-out-clients.aspx
Otherwise one of the chapters in this book is also dedicated to the setup of a selective ISATAP environment, to be used for the purposes of DirectAccess outward management: https://www.packtpub.com/virtualization-and-cloud/microsoft-directaccess-best-practices-and-troubleshooting

Developement XI-Content for Enterprise Services

Hi,
What is XI-Content? And what must be defined in XI-Content for Enterprise Service Enabling?
We have defined some services as provider, these services are goint to be in XI-Content. But we are also requesting some infromation to business partner, these inforamtion could be services or messages in case our partner does not have services.
So my feeling is: in XI-Content we need to define:
Interfaces for the services which we provide;
Interfaces which we as consumer request?
Interfaces which from partner as provider?
Interfaces for the messages which are sending from partner?
Mapping between the service interfaces (provider <->consumer)
Mapping between the messages and the services?
I am sorry, but this is really confusing when we plan the development of XI-content.
Could you give me a clear picture or guideline according to your experience?
Thank you very much.
Jing

This XI content is nothing but most commonly used integration scenarios for address specific business process requirements for a particular landscape.For Ex:Interface for Creating PO ,Sales Order etc.
I have read many articles which say that XI Integration Repository will be re-named as Enterprise Service Repository which will enable the customers to kick-start with Enterprise Services.SAP sets the ball rolling by providing 500 Enterprise Services.
As far as I understand these services are nothing but commonly used re-usable integration scenarios which are powered by Webservices.Enterprise Service Granularity depends on how you define your "Service".
You have an awesome article on ESA which explains in an excellent way.
Search the sdn for Enterprise Service Design Guide which can be an answer all your questions.

Understand the technical base for Enterprise Services?

Hi all,
I am trying to understand what is the technical base for enterprise services and the restrictions when activating them. The best documents I have found are:
Note 1566412 u2013 Enhancement package 6 for SAP ERP 6.0.
Note 1359215 u2013 Technical prerequisites for using enterprise services
sdn blog u201CDetermin the SOA readiness of your System with the ES Workplace (Part 1 and 2)
EHP Master Guide - https://websmp107.sap-ag.de/~sapidb/011000358700001183052011E
The documents are quite informative, however there are still questions. Maybe someone can shed some light of these:
1.) Is my understanding correct that Enterprise services can have three different base u201Cmodulesu201D?:
a. An EHP (with relation to a business function).
b. The swc u201CESA ECC-SE 60xu201D (without relation to a business function). E.G. ES Bundle "Bank Communication Management".
c. The SWC u201CSAP APPLu201D (without relation to a business function). E.G. u201CBusinessPartnerERPUpdateRequestConfirmation_Inu201D
2.) Is it possible to activate enterprise services (bundles) that rely on business functions after a EHP installation or ONLY during the EHP installation?
3.) Is it possible to activate enterprise services with base u201CESA ECC-SE 60xu201D after a EHP installation or ONLY during the EHP installation?
4.) Is SWC u201CESA ECC-SE 60xu201D a u201Ctechnicalu201D business function, whose activation cannot be reverted either? If yes what effect has the activation von u201CESA ECC-SE 60xu201D on the current ERP customizing?
5.) How do the Enterprise Services relate with Service Interface definitions from SAP Process Integration (XI Content)?
Do I need the XI Content with the service interfaces in ES Repository (and SPROXY) only if the communication is B2B (with PI) or also if the communication is Point-2-Point (without PI)?
Thanks for your feedback!
Chris

Hi Chris,
I'll try and provide answers where I can...
1.) Is my understanding correct that Enterprise services can have three different base u201Cmodulesu201D?:
I personally don't agree with this understanding. Enterprise Services would always relate to some or other business function, unless we have a different understanding of what "Business Function" means . What changes is how the Enterprise Services (or versions of them) are delivered.
SAP APPL for example would be relevant to most of the enterprise services shipped with a standard ECC EHP*. So it will relate to the business functionality for the applications that are shipped with an ECC installation.
2.) Is it possible to activate enterprise services (bundles) that rely on business functions after a EHP installation or ONLY during the EHP installation?
I don't understand this question but I'll try and offer a generic answer. You can activate/use Enterprise Services whenever you want to as long as they are already available in your current installation. If they are only available in an EHP that you don't have yet then you will need to upgrade (but I also seem to recall some workarounds - SAP notes - as an alternative to upgrading).
3.) Is it possible to activate enterprise services with base u201CESA ECC-SE 60xu201D after a EHP installation or ONLY during the EHP installation?
You decide when you would like to activate it, it's generally after. SAP will ship them anyway.
4.) Is SWC u201CESA ECC-SE 60xu201D a u201Ctechnicalu201D business function, whose activation cannot be reverted either? If yes what effect has the activation von u201CESA ECC-SE 60xu201D on the current ERP customizing?
There is a tool call Impact Analyzer, read up a little on it. It allows you to do an impact analysis before activating. It might also help posting a separate thread on of the ECC functional forums here on SCN for more impact analysis. I'm not sure if the activation can be reverted.
5.) How do the Enterprise Services relate with Service Interface definitions from SAP Process Integration (XI Content)?
The XI Content is the design equivalent of the Enterprise Services as you see them in SPROXY. It's only relevant in certain cases, examples:
- If you want to enhance standard SAP Enterprise Services
- If you want to do additional transformation/s & routing.
If you are planning P2P type communication, then the XI content is not relevant. One thing to be aware of though is if you have your backend ECC system connected to your PI ESR, the view that you get in SPROXY will reflect the SWC view of the ESR. So you might want to download the XI Content & import it into your PI ESR anyway.
Regards, Trevor

How to activate trace for web services

Hi Experts,
How to activate trace for web services in SOAMANAGER.
We are not able to view the Payload trace of the error logs.
Can anyone please let me know how to go about this???
Regards,
Ashwini

Hi Ashwini,
The thread below might be useful to you:
[SOAMANAGER - Get the XML generated;
Regards, Trevor

Logical Destination/Service Group for Enterprise Services

Hi,
we have a Discovery System V3 and published the Services into the Services Registry of a seperate CE 7.1 installation. Now when I create a NetWeaver BPM process that calls an Enterprise Service from the discovery system I have to specify either a logical destination or a service group.
I know that they are used to configure Web Services (authentication, etc.), but do I have to use them for Enterprise Services delivered by SAP? I thought they are ready-to-run???
Thanks,
Manfred

Yes, we have to use either logical destination or service group. This complies with the new configuration approach of SAP ESOA which is described here: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40dabb46-dd66-2b10-1a9a-81aa620098b3.

Examples for Enterprise Service

Hi All
Anyone can you give some examples of Enterprise serivices.
and
Difference Between ES and Functional Module.
Regards,
Raj

Hi,
you can create "normal" web service out of function modules.
Enterprise Services are first modelled in the ESR and then implemented in the NWDS or the ERP.
You can browse for Enterprise Services.. https://www.sdn.sap.com/irj/sdn/explore-es
SAP provides an environment where you can test the enterprise services...
regards

How does creative cloud for Enterprises licensing works?

how does creative cloud for Enterprises licensing works? witch is the method of verification of keys?
how does it works with active directory?

There is no difference please be aware that each login is provided with two activations however. If you wish to have a computer at both work and home activated though that is perfectly fine as long as your employer is ok with using company software at home.

How to generate client for GetFile service of Webcenter Content Management.

How to generate client for GetFile service of Webcenter Content Management.
Downloaded file : GetFile.wsdl
<?xml version="1.0" encoding="utf-8" ?>
- <definitions xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:s0="http://www.stellent.com/GetFile/" targetNamespace="http://www.stellent.com/GetFile/" xmlns="http://schemas.xmlsoap.org/wsdl/">
- <types>
- <s:schema elementFormDefault="qualified" targetNamespace="http://www.stellent.com/GetFile/">
- <s:element name="GetFileByID">
- <s:complexType>
- <s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="dID" type="s:int" />
<s:element minOccurs="0" maxOccurs="1" name="rendition" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="extraProps" type="s0:IdcPropertyList" />
</s:sequence>
</s:complexType>
</s:element>
- <s:element name="GetFileByIDResponse">
- <s:complexType>
- <s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="GetFileByIDResult" type="s0:GetFileByIDResult" />
</s:sequence>
</s:complexType>
</s:element>
- <s:complexType name="GetFileByIDResult">
- <s:sequence>
<s:element minOccurs="0" maxOccurs="unbounded" name="FileInfo" type="s0:FileInfo" />
<s:element minOccurs="0" maxOccurs="1" name="downloadFile" type="s0:IdcFile" />
<s:element minOccurs="0" maxOccurs="1" name="StatusInfo" type="s0:StatusInfo" />
</s:sequence>
</s:complexType>
- <s:element name="GetFileByName">
- <s:complexType>
- <s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="dDocName" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="revisionSelectionMethod" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="rendition" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="extraProps" type="s0:IdcPropertyList" />
</s:sequence>
</s:complexType>
</s:element>
- <s:element name="GetFileByNameResponse">
- <s:complexType>
- <s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="GetFileByNameResult" type="s0:GetFileByNameResult" />
</s:sequence>
</s:complexType>
</s:element>
- <s:complexType name="GetFileByNameResult">
- <s:sequence>
<s:element minOccurs="0" maxOccurs="unbounded" name="FileInfo" type="s0:FileInfo" />
<s:element minOccurs="0" maxOccurs="1" name="downloadFile" type="s0:IdcFile" />
<s:element minOccurs="0" maxOccurs="1" name="StatusInfo" type="s0:StatusInfo" />
</s:sequence>
</s:complexType>
- <s:complexType name="FileInfo">
- <s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="dDocName" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dDocTitle" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dDocType" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dDocAuthor" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dSecurityGroup" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dDocAccount" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dID" type="s:int" />
<s:element minOccurs="0" maxOccurs="1" name="dRevClassID" type="s:int" />
<s:element minOccurs="0" maxOccurs="1" name="dRevisionID" type="s:int" />
<s:element minOccurs="0" maxOccurs="1" name="dRevLabel" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dIsCheckedOut" type="s:boolean" />
<s:element minOccurs="0" maxOccurs="1" name="dCheckoutUser" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dCreateDate" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dInDate" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dOutDate" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dStatus" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dReleaseState" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dFlag1" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dWebExtension" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dProcessingState" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dMessage" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dReleaseDate" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dRendition1" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dRendition2" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dIndexerState" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dPublishType" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dPublishState" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dDocID" type="s:int" />
<s:element minOccurs="0" maxOccurs="1" name="dIsPrimary" type="s:boolean" />
<s:element minOccurs="0" maxOccurs="1" name="dIsWebFormat" type="s:boolean" />
<s:element minOccurs="0" maxOccurs="1" name="dLocation" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dOriginalName" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dFormat" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dExtension" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dFileSize" type="s:int" />
<s:element minOccurs="0" maxOccurs="1" name="CustomDocMetaData" type="s0:IdcPropertyList" />
</s:sequence>
</s:complexType>
- <s:complexType name="StatusInfo">
- <s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="statusCode" type="s:int" />
<s:element minOccurs="0" maxOccurs="1" name="statusMessage" type="s:string" />
</s:sequence>
</s:complexType>
- <s:complexType name="IdcPropertyList">
- <s:sequence>
<s:element minOccurs="0" maxOccurs="unbounded" name="property" type="s0:IdcProperty" />
</s:sequence>
</s:complexType>
- <s:complexType name="IdcProperty">
- <s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="name" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="value" type="s:string" />
</s:sequence>
</s:complexType>
- <s:complexType name="IdcFile">
- <s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="fileName" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="fileContent" type="s:base64Binary" />
</s:sequence>
</s:complexType>
</s:schema>
</types>
- <message name="GetFileByIDSoapIn">
<part name="parameters" element="s0:GetFileByID" />
</message>
- <message name="GetFileByIDSoapOut">
<part name="parameters" element="s0:GetFileByIDResponse" />
</message>
- <message name="GetFileByNameSoapIn">
<part name="parameters" element="s0:GetFileByName" />
</message>
- <message name="GetFileByNameSoapOut">
<part name="parameters" element="s0:GetFileByNameResponse" />
</message>
- <portType name="GetFileSoap">
- <operation name="GetFileByID">
<input message="s0:GetFileByIDSoapIn" />
<output message="s0:GetFileByIDSoapOut" />
</operation>
- <operation name="GetFileByName">
<input message="s0:GetFileByNameSoapIn" />
<output message="s0:GetFileByNameSoapOut" />
</operation>
</portType>
- <binding name="GetFileSoap" type="s0:GetFileSoap">
<soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document" />
- <operation name="GetFileByID">
<soap:operation soapAction="http://www.stellent.com/GetFile/" style="document" />
- <input>
<soap:body use="literal" />
</input>
- <output>
<soap:body use="literal" />
</output>
</operation>
- <operation name="GetFileByName">
<soap:operation soapAction="http://www.stellent.com/GetFile/" style="document" />
- <input>
<soap:body use="literal" />
</input>
- <output>
<soap:body use="literal" />
</output>
</operation>
</binding>
- <service name="GetFile">
- <port name="GetFileSoap" binding="s0:GetFileSoap">
<soap:address location="http://localhost:7101/_dav/cs/idcplg" />
</port>
</service>
</definitions>

Hi,
I would suggest you to check the time recording functionality, see
details in:
http://help.sap.com/saphelp_sm70ehp1_sp26/helpdata/en/d5/299631364d4e959
c6609ca3bc24740/content.htm
Another possibility is configuring the Service Level Agreement, see
details in SDN blog:
Service Desk: SLA configuration hints
https://weblogs.sdn.sap.com/pub/wlg/24813
or
http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/24813
Thanks
Regards,
Vikram

How to activate Business Add-In (BAdI) for Enterprise Service

Hi,
I have connected enterprise service
Find Production Order by Work Centre
external/technical Name: ProductionOrderSimpleByWorkCentreQueryResponse_In
Namespace: http://sap.com/xi/APPL/SE/Global
SAP Software Component Version: ESA ECC-SE 605
Internal Name: ECC_PRODUCTIONORDERSWQR
SAP Library - Enterprise Services for SAP ERP
http://es-workplace.sap.com/socoview(bD1lbiZjPTAwMSZkPW1pbg==)/render.asp?packageid=DE0426DD9B0249F19515001A64D3F462&id=…
from our ECC system to our PI 7.1 and did first tests.
I'm getting response to my requests from the ECC system.
But in the response, there are only the production order IDs for the requested work centre.
I suppose that the BAdI PORD_SE_PRODUCTIONORDERSWQR, mentioned in service description, has to be activated for the service in the ECC system, to get all the other optional production order elements, defined in the service response message type.
Am I right?
Which steps in the ECC backend are neccessary to activate a BAdI for an enterprise service?
Regards
Roland

Salegram,
BADi is not provide us functionality for data upload for Annual PF / Pension Report.
BADi is using for some add in our business transaction.
just explore tx se18 ans se19.
Amit.

Oracle Service Bus 10.3 - split join how to set header for invoked service

In Oracle Service Bus 10.3 how can I set the header for the service being invoked. We make parallel calls to 2 different business services. One of the invoked service requires header to be set and I am unable to figure out how it can be done. Below are snippet of the code and WSDL.
--- Login Operation start ---
<operation name="login">
<wsdlsoap:operation soapAction="blah"/>
<input name="loginRequest">
<wsdlsoap:body use="literal"/>
<wsdlsoap:header message="passport:loginHeader" part="hppwsHeaderElement" use="literal"/>
</input>
<output name="loginResponse">
<wsdlsoap:body use="literal"/>
</output>
<fault name="genericFaultException">
<wsdlsoap:fault name="genericFaultException" use="literal"/>
</fault>
</operation>
--- Login Operation end ---
--- hppwsHeader Element --
<complexType name="hppwsHeaderElement">
<sequence>
<element maxOccurs="1" minOccurs="0" name="version" type="tns1:version"/>
<element maxOccurs="1" minOccurs="0" name="tx-id" type="tns1:tx-id"/>
<element maxOccurs="1" minOccurs="1" name="systemLangCode" type="xsd:string"/>
</sequence>
</complexType>
--- LoginRequest Element ---
<xs:element name="loginRequestElement" type="s0:loginRequestType"/>
<xs:complexType name="loginRequestType">
<xs:sequence>
<xs:element name="userId" minOccurs="1" maxOccurs="1" type="xs:string"/>
<xs:element name="password" minOccurs="1" maxOccurs="1" type="xs:string"/>
</xs:sequence>
</xs:complexType>
--- LoginResponse Element ---
<xs:element name="loginResponseElement" type="s0:loginResultType"/>
<xs:complexType name="loginResultType">
<xs:sequence>
<xs:element name="sessionToken" minOccurs="1" maxOccurs="1" type="xs:string"/>
</xs:sequence>
</xs:complexType>
In Oracle Workshop for WebLogic when I create a split-join .flow file while adding the invoke service call to login operation I am prompted to create the loginRequest and loginResponse variables. I can assign the appropriate expression to loginRequest.loginRequestElement prior to making the invoke call but then the backend business call fails because "systemLangCode" is not defined and set. Actual fault is
<ns1:genericFault xmlns:ns1="http://hppcbl.globalops.company.com/webservice">
<systemLangCode>en</systemLangCode>
<fault>
<ruleNumber>589</ruleNumber>
<fieldName>systemLangCode</fieldName>
<code>field.empty</code>
<desc>System language code is required.</desc>
<ftype>2</ftype>
</fault>
</ns1:genericFault>
I would really appreciate if someone could guide me on how to resolve this
Regards,
-Nilay

There is this $header variable which you should populate before calling the BS. What is the type of BS? If it is WSDL BS , Any Soap BS then above solution will work. I assume that yours is WSDL based BS and setting $header should resolve this issue.
AnyXML and Messaging type BS services requires that you create proper pay load (setting $header will not work).
There is also other actions Set Transport Headers {outbound request/inbound response} which can be used to set transport related headers but not soap headers.
Manoj

Abap Class for Enterprise Service

Hi guys.
I've published as webservice in SAP ECC as enterprise service get it in Enterprise Service Workplace.
I have two questions:
1- How can I know the abap class associated to this enterprise service.
2- Could I extend the functionality of this enterprise service? For instance I'd like to response with one more field. Is that possible or I have to create a new one?
Thaks a lot.
Regards.
Edited by: Christian Abad Chico on Feb 20, 2012 4:03 PM

Hi
May be the below link helps you,
[http://wiki.sdn.sap.com/wiki/display/EmTech/PublishWeberviceinABAP,ConsumeWebserviceinABAPandAdobeFlex.]
Regards,
Vijay V

How to start developing an Enterprise Service

Hi everybody.
I'm a student who writes his diploma thesis at the moment.
My aim is to identify different serivce candidates with the aid of a roadmap methodology in my company. After doing a business process analysis and identifying all the IT systems and interfaces to external systems I want to develop a enterprise (web) service (with ABAP/Java) offering some type of masterdata from SAP HCM and deploy it to the Exchagne Infrastructure of my company.
But I don't know how to start. There is too much (poor) information. Until know I did not find concrete howto-guides with examples for "developing a service" (both ABAP and Java), "deploying and testing a service with XI". Could somebody give me some hints?
I have access to the ABAP workbench, XI and the NWDS and have read all the theoretical stuff about SOA and SAP ESOA.
Thanks in advance,
Stefan

Hi Stefan,
I might not be bang on target but nevertheless try going through the below links:
[How to Build an Enterprise Service using SAP NetWeaver Process Integration|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c05b36f9-e7d4-2910-4488-a46be7ba2906]
[Enterprise Services Design Guide|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40c05360-0501-0010-63bd-aedd415b6e05]
[Enterprise Services Discovery and Design Guide|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4c1ab044-0401-0010-7aae-b6578bb18b85]
[Enterprise Services Design Guide|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/943e83e5-0601-0010-acb5-b16258f5f20a]
[Creating a Purchase Order Store Record Web Service|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/80fa3dff-ce76-2a10-3f94-f3df8f2db5a2]
Also see my article which explains the creation of a Web Service using EJB (so basically a java web service):
[How to Create a Web Service using Enterprise JavaBeans|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b00917dc-ead4-2910-3ebb-b0a63e49ef10]
Bye
Ankur

ESW: How can I use an enterprise service from ES Workplace?

Hi All,
i would have to use the enterprise service "SupplierERPCreateRequest_In" I found in the SAP ES Workplace. But how can I now use the service? I don´t find the Service in SOAMANAGER.
The corresponding package is installed and in SE80 in Enterprise Service Browser I see the "Service" or Proxy. But in the Enterprise Service Browser appears "Local Objects only (No Connection to ESR)"! Must be activated here anything?
Has anyone any idea what the problem might be or how should I proceed?
Regards,
Bastian

Hi Gourav,
thanks for your answer.
I have looked at the blog, but it´s about XI. From step 2 in the blog, the description is no longer true in my system. The system that I use and where I need the service is SAP ERP ECC 6.0 EHP4, so the latest release.
Do you have another idea?
Thanks and Regards,
Bastian

How to see all the enterprise services in a Discovery system

Hi,
Please let me know how to see all the enterprise sevices in a discovery system.
Please let me know how to load the enterprise services into webdynpro from discovry system
Thanks and Regards,
Naveen N M

Hello all,
I can't figurate how to list all the root directories
(C:/> , D:/>, E:/> etc.) in a system.
I know how to recursively check the content of a
directory and all its subdirectories when a
predefined path is defined. However what I' d like to
do is actually give the option to pick one of the
root directories to start the iteration. I have been
looking around but I can' really find anything
helpful.
If any of you has any idea on how to achieve the
above objective some clarification would be really
appreciated.
Thanks in advance for your help!How to installing the Javax.comm package

How to request acknowledgments for Enterprise services

Similar Messages

Maybe you are looking for