How to reset all ldap users locale in ep7

Hi all:
We have ep7. Our ep7 ume is connected to Windows Active Directory. However, all users's locale is empty. Can I reset all these user's locale to en, is there any place for configure the default locale in UME LDAP ?

Hi
Please check SAP Note Number: 684741.
Cheers.
Please award points for helpful answers.

Similar Messages

How to Reset Password of User while not connected to Domain using Local Admin Account

How to Reset Password of User while not connected to the Domain using Local Admin Account
(I have the use of a local admin account), and I want to help a user reset their password who has logged in the PC and had their credentials cached, but forgot this password.
In Local Admin Account :
When I go to Control Panel, users, users, manager user ; I cannot see any users in this window except the local admin account, and, so I cannot reset a user password this way.
When I go to lusrmgr.msc, then users ; the local admin account will display only.
If I go to command prompt and type "net user", this will not display any users who have logged in to the computer, and so I cannot use "net user" to reset a password.
I don't want to use any disks, 3rd party programs, or create a VPN connection to the domain. I just want to help a user who calls in and forgets their password.

Hello Keith,
I know this is an old thread but I'm trying to better understand how I could change the domain password while not on the network. What I'm getting from your post is that you:
1. Create a local user account (not a domain user)
2. Login with that local user account
3. Connect to the VPN while logged in as a local user
4. Log out of the local account and login with the domain credentials
Now, my question is based on the assumption that the password created on the local account is the same password that one will use to login to the domain account? Also, is the local user account the same as the domain account?
Thanking you in advance!

How to reset All users and delete their table?

Hi,
i want to know How to reset All users and delete their tables with username- system and password-manager.
thanks

Hi
Here delete means truncate or drop?????
If drop use the following statement to generate the script:
select 'drop table ' || Owner || '.' || Table_Name || ';' from Dba_tables
where owner in (<All_the_users_you_want_to_reset>);
But before firing the above statement extract the DDL's to create all the users and put it in a file and just run that file to re-create the users.
if its truncate then:
select 'truncate table ' || Owner || '.' || Table_Name || ';' from Dba_tables
where owner in (<All_the_users_you_want_to_reset>);
Hope this Helps
Regards

TS3988 How do reset my iCloud user id. My new email changed on everything else, but won't change on iCloud.

How do reset my iCloud user id. My new email changed on everything else, but won't change on iCloud.

If you still have access to your old email address, do the following:
Go to https//appleid.apple.com, click Manage my Apple ID and sign in with your iCloud ID. Tap edit next to the pimary email account, tap Edit, change it back to your old email account and verify it. Then edit the name of the account to change it back to your old email address. You should then be able to turn off Find My iPhone with your password. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back and change your primary email address and iCloud ID back to the way it was. You will then be able to go to Settings>iCloud and sign in with your current ID and password to reconnect to your iCloud account.
If you don't have access to your old email address, you will have to contact Apple to get them to reset the password for it so you can disable Find My iPhone and sign into your iCloud account. You will have to prove your identity to them in order to do so. You can either contact iTunes support for assistance with this (https://ssl.apple.com/emea/support/itunes/contact.html), or contact Apple Support (http://www.apple.com/support/icloud/contact/).

How to view all the users existing in a Client

Hi
Can any one help me, How to view all the users existing in a Client (Other than SM04 and AL08).
I want to view not only the active users, but all existing users.
Thanks in Advance
Chandra

Hi,
Check table devaccess. to get all developers list
Reward points if helpful.
Regards,
Mukul
Edited by: Mukul Sharma on Jun 2, 2008 12:10 PM

How to reset all the entries wo exiting the program

Hi How to reset all the entries from the third and last wrong entry and back to first entry wo closing program. It works with the first and second wrong entry, not for third wrong entry.
Attachments:
access.vi ‏59 KB

The reset button does not work because when anything is entered in the operator field, and you press "reset", two events occur (1) a change is detected in the operator field and (2), a change in the reset is detected. Event (1) occurs first stopping the loop. The reset case is thus never reached.
One solution would be to sense the reset state in the "operator" event. You need to keep the loop running if reset is pressed. (See attached modification.)
Some other suggestions: Notice that I also made a data dependency between the case structure and the while loop. Without this, there is no guarantee that the case structure executes before the while loop and you might generate a race condition with unexpected results. I also re
moved the timeout event, it doesn't seem to do anything. The three text fields should be set to "limit to single line" in this application so fields can be finished by hitting the enter key).
LabVIEW Champion . Do more with less code and in less time .
Attachments:
accessMOD.vi ‏65 KB

How to reset password for user sap*

Hi friends,
How to reset password for user sap* if any solution please mail me.
Thanks,
Yogesh

Hi,
<b><u>Steps for Reset SAP* Password</u></b>
If you forgot or lock "Administrator or J2EE_ADMIN" password just follow below steps:
STEP-1: Enable "SAP*"
1.Start the Config Tool C:\usr\sap\<SID>\<engine-instance>\j2ee\configtool\configtool.bat
Ex: D:\usr\sap\F02\JC00\j2ee\configtool --> configtool.bat
2.Goto cluster-data --> Global server configuration --> services --> com.sap.security.core.ume.service
3.Double-click on the property "ume.superadmin.activated = TRUE"
4.Double-click on the property "ume.superadmin.password=<Enter any password ex: abc123>"
5.Save.
6.Restart the engine.
STEP-2: Login with "SAP*" into portal
1. http://<host>:<Port>/useradmin/index.jsp
2. Enter userid / password as" SAP* / <password ex: abc123>"
3. Search for "Administrator" user
4. Reset or change password for "Administrtor"
STEP-3: Disable "SAP*"
1.Start the Config Tool C:\usr\sap\<SID>\<engine-instance>\j2ee\configtool\configtool.bat
Ex: D:\usr\sap\F02\JC00\j2ee\configtool --> configtool.bat
2.Goto cluster-data --> Global server configuration --> services --> com.sap.security.core.ume.service
3.Double-click on the property "ume.superadmin.activated = FALSE"
4.Save.
5. Restart the engine.
STEP-4: Login with "Administrator"
1. http://<host>:<Port>/useradmin/index.jsp
2. Enter userid / Password as "Administrator / <password>
3. it will ask change password just change it.
Please follow steps one by one. it should resolve your issue.
Thanks,
Nagaraju Parlapalli

How do reset the password in Local NetwearAdministartor (NWA)

Hi
I have to logon local NetwearAdministartor , password is Locked
Please , How do reset the password in Local NetwearAdministarator(NWA)
Thanks
Srini

Hello Srini,
Please have a look at this wiki page that should give you the steps http://wiki.sdn.sap.com/wiki/display/EP/ToResetAdministratorPasswordthroughConfigTool
Regards
Mark

How to retrieve all the users along with their password from LDAP

Hello,
Can anyone let me know how to retrieve and list all the user along with their password from LDAP.
Thanks

Hi Prashant,
I have limited experience with Synchronization, but I agree with you - if you need to synchronize Passwords, you need to have the Password in clear Text.
If you trying to build your own Synchronization Solution using any of the avaliable LDAP APIs, I don't think you can ever retrieve a user's Password in clear text.
However, I did come across an interesting article & I hope you find it useful :-
http://www.oracle.com/technology/obe/obe_as_10g/im/configssl/configssl.htm
I am not sure if SSL is necessary - If you have a look at Metalink Note 277382.1 ( How to Configure OID External Authentication Plug-In for Authentication Via Microsoft Active Directory (MS AD) ), teh question asked by oidspadi.sh for the same is asnwered as "N".
Regards,
Sandeep

How to reset all Internet Explorer 8 settings for a different user profile?

Sometimes users on locked down PCs that need their IE settings reset to resolved issues such as improper/old cached credentials stored in the browser after a password change etc. These issues can be resolved by opening
Internet Options, Advanced tab, Reset, Delete All, Reset.
The users cannot do this because the Advanced Tab is hidden by policy. If an administrator logs in with a different account, of course, anything they change is in their profile and not the user's profile.
Is there some way for an administrator user to log in and access Internet Control Panel settings for a different user's Internet Options so they can reset the browser for a limited user?
We need a more streamlined way to do this instead of needing to either blow away the user's entire Windows profile or else go through the convoluted process of getting the GPO admins to undo the group policy for one user to unhide the tab, have the help
desk reset the browser for the user and then have the GPO admins reapply the original policy.

You can try the following script
Reset Internet Explorer all Setting to default using PowerShell Script
http://gallery.technet.microsoft.com/scriptcenter/Reset-Internet-Explorer-20f838e7
but this script still launches an interactive interface, you can ask in this form to improve the script to achieve an totally unattended process.
The Official Scripting Guys Forum!
http://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?forum=ITCG
You can create a task schedule to trigger the process. When computer starts or
IE open , the script launches itself automatically.
Schedule a task
http://windows.microsoft.com/en-au/windows/schedule-task#1TC=windows-7
Regards
Yolanda
TechNet Community Support

How create LOV(select List) with all LDAP users

Hello,
I am trying to create a selected list with all the users in my LDAP, note my LDAP is synchronized with my OID.
Any suggestions, I'm searching the the pl/sql statment?
Thanks
Hussam

Hi Hussam,
Take a look at my comments in the following two threads -
Re: LDAP
Re: Cookie And LDAP
The two different threads discuss the methods I use to do what you want to do (so you really need to 'combine' the two different threads).
Hope this helps

How to reset windows 2008 R2 Local Administrator password

Hi Team,
I have forget windows 2008 R2 local admin password, the server is not in domain , is it any way to reset local administrator password.
Regards,
Triyambak
Regards, Triyambak

When your Windows Server 2008 R2 computer is still accessible, you can reset or change your administrator password with ease by the following steps.
Step 1: Log in your Windows Server 2008 R2 computer through the administrator account.
Step 2: Click on “Start” on the lower left corner of your screen, and hit “Control Panel”, and then doubt-click on "User Account".
Step 3: Choose “Make changes to your user account”, and then click on “Change your password”.
Step 4: Now you will be asked to enter your current password, type in it.
Step 5: Enter your new password and retype it to confirm your new password. You are optional to type in a word or phrase as the hint of the new password. It is highly recommended.
Another tip, Using a password recovery tool to recover WIndows server 2008 administrator password
This is a universal WIndows password recovery method which can fix any Windows system password issue.
1. Get Windows Password Rescuer and install it on another computer.
2. Burn password reset disk into USB or CD/DVD device with Windows password recovery.
3. Boot Windows server from password reset USB or CD disk
4. Reset forgotten Windows server 2008 local or domain admin password without data loss.
Detailed steps: http://www.wimware.com/how-to/reset-windows-server-2008-password.html
I also have seen a way that users can use a Windows server 2008 install CD to reset the administrator password, you could search and have a try.

How to list all OID Users

Hello,
I have Oracle OID synchronized with my LDAP directory, i need a pl/sql statement that returns all the users in LDAP directory.
Any Ideas ?
Regards,
Hussam

Hi Paul
Well although writing a simple Portal Application is quite a straight forward method of approaching it, but I think you could also retrieve the mapping data using a AppIntegtrator iView.
Please have a look at this thread , where there is a link to Will Carltons paper, which explains on how to do that.
How to access user id and password via UserMapping ?
Give it a shot!
Cheers.
Award points for helpful answers.

How to authenticate AD LDAP user in Oracle ADF login?

Hi All,
I have some requirement in ADF web-application.here one simple adf application they want to authenticate with AD LDAP user, and they want to see logged user details from LDAP.
for example after user logged in from adf login page, in next page he can able to see his details like first name,last-name,email,group,role, working phone like some details in next page.
let me know possibles, to active this requirements.give me some solution to make this simple.
Thanks,
Siva

thanks for quick reply!
yeah just now i went through the same blow.so i decided to follow java base integration.here we need to pass username and password from UI right,while i am trying the something. I had some here with rich text binding.
I am unable to set the username and password dynamic if I use Richtext type input text in ADF login page.
I am newable to this integration.can you please point to some example to LDAP integration with adf using java. or if not complex can you please send me LDAP integration example which u executed(to my mail) u can get from my profile.
thanks & Regards
Siva

How to show all the user entry variables in a workbook.

Hi,
My user need to see in the workbook all variables he had entered in the variable entry popup at the openning of the workbook.
I know how to show all the variables, included the hardcoded variable in the query (with a text element, select the checkbox "Display All Statics Filters"), but I need only the user entry variables.
There is a way to print only these variables?
Thank you

Thanks, but the problem is that this workbook is my Global default workbook used for all the queries. So I only want the user entry variables visible automaticly.
There is a way to do that ?
For information, i'm using Netweaver 7.
Thank you

How to reset all ldap users locale in ep7

Similar Messages

Maybe you are looking for