How to reset numbers in real time display in Cisco Supervisor Desktop?

Hi all,
I wonder about numbers in real time display in Cisco Supervisor Desktop. There are many statistic number for example : Call Handled, Max Talking, Avg Talking, Max Ready, Total Ready, Call abandoned, etc. Is there any way to reset those numbers back to zero? Please let me know.
Thank you.

Joe,
I haven't tried that, but I'm very skeptical. The CAD Agent gets stats from two places - CTIOS and RASS. RASS keeps the call log information in a SQL Desktop Engine database.
Stats derived from CTIOS reset at midnight. Obviously, restarting the RASS service has no effect on those. Call log information is being kept in a database so it seems to me that a restart of RASS should also have no effect.
I guess I will have to try for myself.
Regards,
Geoff

Similar Messages

Agent real time display not ready time is inaccurate

Agent Not Ready Detail in Webview-Agent Realtime Reports in CAD.
I am looking at the agent: Agent Not Ready Detail Report in Webview and comparing this to the Agent Real Rime Display in CAD. If I manually add the Not Ready times (state durations) from the agent ACD state log, they equate to the Cisco Web View agent report. However, the Total Not Ready column from the Agent Detail Display report in CAD does not sync up with either Webview or CAD. Its more than an hour off.
The Eastern managers are looking closely at these numbers now and one of the agents questioned the report in CAD today and brought this to a manager's attention. It is more than an hour off which is a big difference.
It was comparing the state duration for not ready from the ACD State Log Display (for example the 5 seconds at 10:15:04 in screen shot 1) to the total not ready time from the Agent Real Time Display Displays report (3:48:59 in screen shot 2). The total individual state durations of unavailable time from report #1 does not equal report #2 and I would think it should. If not explain why?
From CAD client > Real Time Displays > Agent ACD State Log Display. If you add up all the Not Ready times and compare with webview, it matches. No problem here.
From CAD client > Real Time Displays > Agent Detail Display (this doesnt match up with webview report or the total Not Ready times in Agent ACD State Log Display).
We're looking to know either
1. How exactly the not ready state time is calculated
OR
2. Where to find the information on how this is deteremined.
I appreaciate any response. Thank you.

Is it all agents or only one/some?
What does CSD show? Can you post a screenshot of the CSD main screen for a team?
Also, please post the traces from Desktop Recording and Statistics Server.

How to change the default Real-Time Collaboration page?

Who can tell me how to change the default Real-Time Collaboration page?
If I want to add my corporation logo in the top of the default page.How to do?
Thanks!

Thanks for your help.
"Click the Sites tab to display all sites and their IDs for your system." But I clicked the sites tab ,it showed "http://hostname:7777/imtapp/app/home.uix". I could not find the siteID parameter from it. Why?
How to get it from command?

UCCX 8 - CSD Real Time Display "N/A"

Hello,
We are facing an issue with Cisco Supervisor Desktop real time display "Agent Logs - call" and "Agent Logs - state". These two real time displays show "n/a" while select specific agents (some agents it show data as normal). For the agents who display "n/a" in CSD, in CAD the real time data display as normal.
For example: When supervisor monitor Agent_A in CSD "Agent Logs - call" show "N/A" (the same to Agent Logs -state). But in CAD, Agent_A can see real time display "Agent Call Log Display" as normal (the same to "Agent ACD State Log Display").
Does anyone experience this issue?
It seem that the real time display data in CAD and CSD are getting from the same source. How come the CSD show "n/a" when the data is available in CAD? Any idea, please help.
Many thanks,

Hi Anuj,
Thanks for your response. We are currently running on UCCX SU2. We used to reinstalled CSD/CAD already after we upgrade the UCCX to SU2. Our issue is now fixed by delete the user id of inactive agent from resource page and resync the directory services.
Just a note for anyone who might face similar issue, the recommendation is to first check the version of CAD/CSD running on the client PC (as Anuj suggest) and also comparing the user ID with the UCCX resource page. Be aware that user ID is case sensitive. Check the inactive agent list in the resource page. Delete the user id if you see it there. Then go to Desktop Administrator to resync the directory servcies.
Thanks!

How to create idoc in real time

hi guru
how to create idoc in real time
thanks
subhasis

Hi sahoo,
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30 )
Create Message Type ( WE81 )
Assign Idoc Type to Message Type ( WE82 )
Creating a SegmentGo to transaction code WE31Enter the name for your segment type and click on the Create iconType the short textEnter the variable names and data elementsSave it and go backGo to Edit -> Set ReleaseFollow steps to create more number of segments
Create IDOC TypeGo to transaction code WE30Enter the Object Name, select Basic type and click Create iconSelect the create new option and enter a description for your basic IDOC type and press enterSelect the IDOC Name and click Create iconThe system prompts us to enter a segment type and its attributes
Choose the appropriate values and press EnterThe system transfers the name of the segment type to the IDOC editor.Follow these steps to add more number of segments to Parent or as Parent-child relationSave it and go backGo to Edit -> Set release
Create Message TypeGo to transaction code WE81Change the details from Display mode to Change modeAfter selection, the system will give this message The table is cross-client (see Help for further info). Press EnterClick New Entries to create new Message TypeFill detailsSave it and go back
Assign Message Type to IDoc TypeGo to transaction code WE82Change the details from Display mode to Change modeAfter selection, the system will give this message The table is cross-client (see Help for further info). Press Enter.Click New Entries to create new Message Type.Fill detailsSave it and go back.
Reward points if helpful.
Thanks
Naveen khan

Is it possible to disable some popups from FEP Client on the desktop. But how to disable popups from real time protection

Is it possible to disable some popups from FEP Client on the desktop. But how to disable popups from real time protection. This is so that end users who are non technical are not disturbed and only the I.T is aware of the viruses in teh environment.Shahid Roofi

You could set policies which when a malware detected an action perform automatically without user interaction but there is no GPO which stop the notification, one reason could be that when notification keep appearing, then user will know something is wrong
otherwise why FEP should display any warning.

How do i set up a second display for my iMac desktop? I want to use both displays at the same time.

how do i set up a second display for my iMac desktop? I want to use both displays at the same time. My iMac is the 24" Late 2006 model. I recall that there is a cord for plugging in a second monitor, but I want to make sure that i can use both monitors side-by-side at the same time. thank you.

If the Display supports DVI, then you will need a > Mini-DVI to DVI Adapter and a DVI cable.
If the Display only supports VGA, then you wiil need a > Mini DVI to VGA Adapter and a VGA cable.
Noting that the (digital) DVI is far better than the (analog) VGA connection.
Also see > Using Dual Displays on Mac OS X: The Experience

How can I implement a real time datawarehouse

Hi, I'm a little lost here but I want to know how can I implement a real time datawarehouse in sql server, I don't know if it is only to make the extraction process the shortest time possible.
Thank you

Hi Mega15,
I agree with everything Seif and Louw said, but I'd like to add that if you are using SQL Server 2012 or 2014 and you want to use DirectQuery or ROLAP mode (depending on what SSAS mode are you using, tabular or multidimensional) you may be interested on
using columnar indexes on your base tables.
Analytical and aggregated queries will take GREAT advantage from these indexes, they will perform much better than with traditional B-Tree indexes in most of your scenarios.
Regards.
Pau.

Agent Real Time Displays 1 hour ahead

Greetings all,
Agent Real time display are showing 1 ahead hour of clock system.
Anyone have a suggestion if this is a bug or configuration issue ??
I have attached a screenshot to simplify
UCCX: 7.0

Hello Leonardo,
Could you please check if the time display by the Real Time Reports is the same time of the server??
Also I would like to know if the server and the agents are configure to use the same time zone??

What is ods concept in BW ?how it is used in real time?

what is ods concept in BW ?how it is used in real time?

Hi,
Please go through the following links:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/eb8f1895-0501-0010-73ad-e0bef4a2000a
http://help.sap.com/saphelp_nw2004s/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
you can find more links in SDN.
Regards,
Chandan

How do I monitor in real time my teen's text messages?

How do I monitor in real time my teen's text messages?

I have just started using TeenSafe.com. I like that it monitors even deleted messages but it only updates while phone is being recharged. And I haven't figured out yet if it picks up iMessages. I can get location in real time which is helpful.

CAD agent detail real-time display

UCCE with CAD:
When agents show their statistics in the CAD window, and select Agent Detail Real-Time Display - the Avg Talking field is showing the same number for ALL agents. For example, each agent shows a value of 2:26 for Avg Talking. It would seem to me that this field should be specific to each individual agent, and not an average of all agents in the skill group. The Cisco CAD User Manual shows Avg Talking to be "The total time on calls (all talk time + all hold time) divided by the number of calls"
The other fields, i.e. calls presented, calls handled, etc, are specific to the individual agent and show different values as I would expect.
Am I mis-reading the documentation (which is entirely possible)? Has anyone else seen this?
Thanks,
Robb

Hi Robb,
Found my old TAC Case. It was for an upgrade from 7.2.5 to 7.5.6 so you might be hitting a similar issue. This is the email of the escalation from Cisco to Calabrio for the issue I had if it helps when you talk to TAC:
Problem Description:
Detailed Description
Upgraded ICM from 7.2.5 to 7.5.8 (CAD 7.5.6), after upgrade, CAD realtime
display report "Agent ACD State Log Display" start time shows a start time of 00:00:03
against every state change
Business Impact
medium:Could not see the Agent login time correctly
Troubleshooting Performed
Similar case:
http://wwwin-tools.cisco.com/casekwery/getServiceRequest.do?id=613948701#not
e48
However, the fix is
actually to go into the LDAP utility and do a hack to a certain key
within the database. Unfortunately the previous case doesn't tell which
key to edit and what to change it to. I'm presuming it had something to
do with the time zone from a mention earlier on within that case, but
not sure.
No bugs found related to the issue.
Specific Assistance Required
Need assistance to fix the issue with ACD State Log Display
Cheers,
Nathan

An agent be able to see his real time performance statistics on his desktop

HI,
In Cisco UCCE how can an agent be able to see his/her real time performance statistics on his desktop?
Please suggest.
Thanks,
Manish

Nope. An agent has a limited real-time view of the skill groups they belong to. They can see the number of calls in queue and how long the longest one has been waiting. They also see the number of calls they have received so far today and the average talk time.
What do you want to see?
Regards,
Geoff

How can I generate a real-time highchart from my database data?

I have looked several links; however, I couldn't find a working demo showing how to implement a highchart using data from a database.
Objective: I want to generate a real time highchart line graph getting data from my database. What I want is very similar to the
HighChart Demo which provides a real-time highchart with randomly generated values. It is also similar by X-axis and Y-axis, for I want my x-axis to be "Time" (I have a DateTime column in my database) and y-axis to be an integer (I have
a variable for that as well in my database).
Please I need help in sending the model data to my razor view.
Note that I am already using SignalR to display a realtime table. I also want to know if it can be used to automatically update the highchart as well.
Below is the code snippet of my script in the view. I have used the code provided in
HighChart Demo link for generating the highchart. Please tell me where should I apply the changes on my code.
@section Scripts{
<script src="~/Scripts/jquery.signalR-2.2.0.js"></script>

<script src="~/SignalR/Hubs"></script>
<script type="text/javascript">
$(document).ready(function () {
// Declare a proxy to reference the hub.
var notifications = $.connection.dataHub;
//debugger;
// Create a function that the hub can call to broadcast messages.
notifications.client.updateMessages = function () {
getAllMessages()
// Start the connection.
$.connection.hub.start().done(function () {
alert("connection started")
getAllMessages();
}).fail(function (e) {
alert(e);
//Highchart
Highcharts.setOptions({
global: {
useUTC: false
//Fill chart
$('#container').highcharts({
chart: {
type: 'spline',
animation: Highcharts.svg, // don't animate in old IE
marginRight: 10,
events: {
load: function () {
// set up the updating of the chart each second
var series = this.series[0];
setInterval(function () {
var x = (new Date()).getTime(), // current time
y = Math.random();
series.addPoint([x, y], true, true);
}, 1000);//300000
title: {
text: 'Live random data'
xAxis: {
type: 'datetime',
tickPixelInterval: 150
yAxis: {
title: {
text: 'Value'
plotLines: [{
value: 0,
width: 1,
color: '#808080'
tooltip: {
formatter: function () {
return '<b>' + this.series.name + '</b><br/>' +
Highcharts.dateFormat('%Y-%m-%d %H:%M:%S', this.x) + '<br/>' +
Highcharts.numberFormat(this.y, 2);
legend: {
enabled: false
exporting: {
enabled: false
series: [{
name: 'Random data',
data: (function () {
// generate an array of random data
var data = [],
time = (new Date()).getTime(),
i;
for (i = -19; i <= 0; i += 1) {
data.push({
x: time + i * 1000,
y: Math.random()
return data;
function getAllMessages() {
var tbl = $('#messagesTable');
var data = @Html.Raw(JsonConvert.SerializeObject(this.Model))
$.ajax({
url: '/nurse/GetMessages',
data: {
id: data.id,
contentType: 'application/html ; charset:utf-8',
type: 'GET',
dataType: 'html'
}).success(function (result) {
tbl.empty().append(result);
$("#g_table").dataTable();
}).error(function (e) {
alert(e);
</script>

Hi Sihem,
Thank you for contacting National Instruments. Using the LabVIEW Real-Time module, you can do development without actually having a target. While viewing the project explorer window, you can do the following steps:
Right click on the project
Select New >> Targets and Devices
Select the "New Target or Device" radio button
Select the target you would like to develop on.Information about the LabVIEW Real-Time Module can be found here.
Regards,
Kevin H
National Instruments
WSN/Wireless DAQ Product Support Engineer

How can 2 users collaborate real time on a Pages document?

I have two computers at home: an iMac and a macbook pro. We have no problem sharing document via the wireless Timecapsule network. Recently, as we have been deep in editing documents using Pages, we were trying to find out how to configure pages so that we can both edit the same document at the same time (collaboratively) and see each other's edits in real time as we progress. Google docs has this option but it's rather slow.
Is there an option to do this in Pages on a local network?
If no, do you know of any other Apple programs that let you collaborate on text document in real time?
Thank you.

Welcome to the forums!
Pages cannot do what you want. Most word processors can't. However, there are a few solution that can. SubEthaEdit is a collaborative text editor for the Mac, so it can handle this kind of task. It has received pretty positive reviews. You might also check out Collaborate, UNA (although this is more intended for software development), and Gobby.

How to reset numbers in real time display in Cisco Supervisor Desktop?

Similar Messages

Maybe you are looking for