How to reset password of weblogic sip server 3.1

Hi ,
Can anybody help me in resetting the username/password of weblogic sip server 3.1
Thanks a lot
Regards
Saurabh

Hi,
If we have only one admin account available, I am afraid there is no means to reset the password other than reinstalling Windows. See this article as a reference:
What to do if you forget your Windows password
Besides, we may try to create the Windows 8.1 install media with the following article:
Create installation media for
Windows 8.1
How to perform a clean installation of Windows
And please note, if we do a clean install, we need to activate Windows again.
If Windows 8 came preinstalled on your computer, your product key should be on a sticker on your computer or with your documentation. Or we may contact the manufacturer for further help.
Best regards
Michael Shao
TechNet Community Support

Similar Messages

Weblogic SIP server 3.1

how to use weblogic SIP server with X-lite?
because the x-lite's message "network not ready"
where the false?

I found answer to my question.
Yes it is available.
It is now “Oracle Communications Converged Application Server”

How can reset password of bulk users in one time through AD or script?

how can reset password of bulk users in one time through AD or script?

Hello Mr. Lovely,
Do you have ActiveDirectory Module which shipped with Windows Server 2008 R2? If you have it, you can complete this task very easily.
#First, you need to import ActiveDirectory Module
Import-Module ActiveDirectory
#Second, generate a SecureString which contains the password.
$securePwd = ConvertTo-SecureString -String "P@ssw0rd!" -Force -AsPlainText
#Third, find the Active Directory users ,and use Set-ADAccountPassword for resetng the password.
Get-ADUser -Filter {Name -like "Test*"} | Set-ADAccountPassword -NewPassword $securePwd
Also, you can review following link for more details about the Active Directory cmdlets.
Active Directory Cmdlets in Windows PowerShell
http://technet.microsoft.com/en-us/library/ee617195.aspx
Best Regards,
Greg Gu
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

How to reset password for user sap*

Hi friends,
How to reset password for user sap* if any solution please mail me.
Thanks,
Yogesh

Hi,
Steps for Reset SAP* Password
If you forgot or lock "Administrator or J2EE_ADMIN" password just follow below steps:
STEP-1: Enable "SAP*"
1.Start the Config Tool C:\usr\sap\<SID>\<engine-instance>\j2ee\configtool\configtool.bat
Ex: D:\usr\sap\F02\JC00\j2ee\configtool --> configtool.bat
2.Goto cluster-data --> Global server configuration --> services --> com.sap.security.core.ume.service
3.Double-click on the property "ume.superadmin.activated = TRUE"
4.Double-click on the property "ume.superadmin.password=<Enter any password ex: abc123>"
5.Save.
6.Restart the engine.
STEP-2: Login with "SAP*" into portal
1. http://<host>:<Port>/useradmin/index.jsp
2. Enter userid / password as" SAP* / <password ex: abc123>"
3. Search for "Administrator" user
4. Reset or change password for "Administrtor"
STEP-3: Disable "SAP*"
1.Start the Config Tool C:\usr\sap\<SID>\<engine-instance>\j2ee\configtool\configtool.bat
Ex: D:\usr\sap\F02\JC00\j2ee\configtool --> configtool.bat
2.Goto cluster-data --> Global server configuration --> services --> com.sap.security.core.ume.service
3.Double-click on the property "ume.superadmin.activated = FALSE"
4.Save.
5. Restart the engine.
STEP-4: Login with "Administrator"
1. http://<host>:<Port>/useradmin/index.jsp
2. Enter userid / Password as "Administrator / <password>
3. it will ask change password just change it.
Please follow steps one by one. it should resolve your issue.
Thanks,
Nagaraju Parlapalli

How to Reset Password of Client 800 in SQL server2005 of IDES Ecc6.0

Dear All,
how to Reset Password in SQL server of Client 800 IDES Ecc6.0.
& what will be its password.
with best regards.
Ishtiaq

Hi
Simple logic we have sap* and ddic as default users if you are unable to login to client 800 with any of the user then you need to delete the user sap* from database level so that it will be recreated again and you can login as sap* and password as pass here is the procedure
login to ora<sid>
execute the sql statement
delete from usr02.sapr3 where bname = 'SAP*' and mandt = '800';
commit;
sapr3 is your schema id
You also need to check parameter login/no_automatic_user_sapstar is set to 0 so you can logon as SAP* password pass
If the parameter doesn't exist then maintain in instance profile
/usr/sap/SID/SYS/profiles/SID_DVEBMGS00_Host
Unfortunately you'll need a system restart to enable and disable the parameter
You can also refer to below links
http://www.sap-img.com/basis/changing-the-default-password-for-sap-user.htm
http://www.sap-basis-abap.com/bc/forgot-password-for-user-id-sap-in-client-000.htm
Let me know if you need more help
Regards
Uday

Deploying war file in weblogic SIP server 2.2

Hi,
I trying to deploy a "sar" file in weblogic SIP server,but it is not allowing me to do that.So one of my collegue told me to change the "sar" to "war" and try to deploy.
When i am trying to deploy that it is saying that unable to find deployment descripter WEB-INF/web.xml in the war file.Actually it is there.But i don't know why it is giving that error.
Actually i need to deploy "sar" file and i changed that file into "war" file
What are all the trail and error to solve this problem
(1)I made the "war" file from file folders.
suppose my application directory name is "myapp"
then i am going into the "myapp" folder and from there i am trying to make war file and it is having all the related class files , sip.xml file , web.xml file.
Then i tryed to deploy that file from weblogic SIP server 2.2.console.
(2) Next I included the weblogic.xml file also into the war file.
(3)The "sar" file working fine in SDS 3.1,but not in we blogic SIP server.
(4)The SDS3.1 is working with JRE 5 so i changed that JRE from 1.5 to jre 1.4. and again prepared the sar file and changed that SAR file to WAR file.
I created a domain in SIP server which was created in "user_projects."
For e.g., the domain name is "mydomain" and
the directory structure is
mydomain
|
|
|----------applications(dir)
|
|----------myserver(dir)
|
|----------rmfilestore(dir)
|
|----------sipserver(dir)
|
|-----------boot (file)
|
|-----------config.xml
|
|-----------startWeblogic
|
|-----------stopWebLogic
|
|----------upload-------xxxxmanager----META-INF---WEB-INF----log4j.properties
--------------sip.xml
-----------------web.xml
-------------weblogic.xml
web.xml, sip.xml,log4j.properties are under WEB-INF folder
Do i need to change any path setting in startWebLogic.cmd file.I didn't change any thing in the startWeblogic.cmd.
Since my war file is having all the related files like all the related "jar" files in that.
Any body's help will be appriciated.
Thanks
vish

Can any body please reply for above question.
Hi BEA support please flash some light on my above question
vkviswanadh

How to Reset Password of User while not connected to Domain using Local Admin Account

How to Reset Password of User while not connected to the Domain using Local Admin Account
(I have the use of a local admin account), and I want to help a user reset their password who has logged in the PC and had their credentials cached, but forgot this password.
In Local Admin Account :
When I go to Control Panel, users, users, manager user ; I cannot see any users in this window except the local admin account, and, so I cannot reset a user password this way.
When I go to lusrmgr.msc, then users ; the local admin account will display only.
If I go to command prompt and type "net user", this will not display any users who have logged in to the computer, and so I cannot use "net user" to reset a password.
I don't want to use any disks, 3rd party programs, or create a VPN connection to the domain. I just want to help a user who calls in and forgets their password.

Hello Keith,
I know this is an old thread but I'm trying to better understand how I could change the domain password while not on the network. What I'm getting from your post is that you:
1. Create a local user account (not a domain user)
2. Login with that local user account
3. Connect to the VPN while logged in as a local user
4. Log out of the local account and login with the domain credentials
Now, my question is based on the assumption that the password created on the local account is the same password that one will use to login to the domain account? Also, is the local user account the same as the domain account?
Thanking you in advance!

Sh Application to test weblogic sip server 3.1

Is there any Sh application available to test weblogic sip server diameter domain?
I set up a diameter domain with hssclient only. The interface works fine. but I cannot find sh application to deploy.
just wondering where to get sh application example?
or is the application at diameter manageable? I meant that can I configure public id, HSS server and so on at admin console.
Thanks.

Hello,
You will need to test and recompile the application referencing the new Web Services .dlls for the BusinessObjects Enterprise version you plan to use.
There are some changes for example BusinessObjects Enterprise XI R3.1 uses Axis 2:
' Web Services URLs
Private WS_BASE_URL As String = "http://localhost:8080/dswsbobje/services/"
'NOTE: The following variables are case sensitive
'       Upper case for Axis 2.0 (BOE XI R3.1)
Private WS_URL_SESSION As String = WS_BASE_URL + "Session"
Private WS_URL_REPORTENGINE As String = WS_BASE_URL + "ReportEngine"
Private WS_URL_BIPLATFORM As String = WS_BASE_URL + "BIPlatform"
'       Lower case for Axis 1.1 (BOE XI R2)
'Private WS_URL_SESSION As String = WS_BASE_URL + "session"
'Private WS_URL_REPORTENGINE As String = WS_BASE_URL + "reportengine"
'Private WS_URL_BIPLATFORM As String = WS_BASE_URL + "biplatform"
Then deploy the application with the appropriate version of the Web Service .dlls.
The new documentation can be found at:
http://help.sap.com/businessobject/product_guides/boexir31/en/wssdk_dg_12_en.zip
and
http://help.sap.com/businessobject/product_guides/boexir31/en/wssdk_net_apiRef_12_en.chm
Elaine

"Server Header" with Weblogic SIP Server 2.2

Hi All,
I'm using Weblogic SIP Server 2.2, based on Weblogic Server 8.1 SP5, and I want to desactivate the "Send Server Header" option.
I try to do it by using the console like describe in http://e-docs.bea.com/wls/docs81/ConsoleHelp/domain_server_protocols_http.html page. The config.xml file is modified ( <WebServer Name="myserver" SendServerHeaderEnabled="false"/>), but all response messages still contain the server header.
This header adds information about the version of WebLogic Server that is running. Which is a security leak.
It seem's that this problem is solved since Weblogic Server 8.1 SP4. But I don't succeed in turning the option off.
Any idea about this issue?
Thanks,
Karine.

Hi,
This problem is resolved by installing the new version of WebLogic SIP server (3.0 prÃ©views).
Thanks,
Karine.

HT1212 how to reset password on an ipad?

how to reset password on an ipad?

Hi,
Which password do you want to reset?
Apple ID: go to http://appleid.apple.com
Passcode Lock: go to Settings > General > Passcode Lock > enter yours > Change Passcode
HTH

How to reset password for a web user via GUI?

Hi,
How to reset password for a web user ID via GUI? is it possible?
Thanks.

Hi,
You can reset the pwd for the user through trascn SU01.
BR,
Disha.
*Pls reward points for useful answers.*

How to reset password for iomega storecentre ix2

hi! how to reset password for iomega ix2?

There is a pin hole reset button on the back. This will reset user and network settings. Here is a link to the directions.
https://lenovo-eu-en.custhelp.com/app/answers/detail/a_id/32232/kw/reset

How to reset password on HP Photosmart C4780 printer?

new internet service requires re-installation of printer.
Model=HP Photosmart C4780
installation prompt requests password.
password forgotten.
how to reset password?

Hello,
The HP software shouldn't ask you for a password unless you have permission issues on the PC, and it's asking for the admin password.
Try installing the full feature drivers from here.

HT5262 How to reset password after ipod says ipod disabled

How to reset password after ipod says disabled?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If you previously synced to the computer then you may be able to recovery use of the iPod without erasing the iPod by following the instructions here:
Disabled Recovery-must use syncing computer.

How to reset password if i forgot my current password

how to reset password if i forgot my current password

If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password. In OS X 10.10 and later, this option also works with FileVault, but only if you enabled it when you activated FileVault. It's not retroactive. Otherwise, see below.
Note: If you've activated FileVault, this procedure doesn't apply. Follow instead these instructions.
Start up in Recovery mode. When the OS X Utilities window appears, select
Utilities ▹ Terminal
from the menu bar at the top of the screen—not from any of the items in the OS X Utilities window.
In the window that opens, type this:
resetp
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window opens. Close the Terminal window to get it out of the way.
Select the startup volume ("Macintosh HD," unless you gave it a different name) if not already selected. You won't be able to do this if FileVault is active.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select
 ▹ Restart
from the menu bar.
You should now be able to log in with the new password, but the Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as the login password), there's no way to recover it.

How to reset password of weblogic sip server 3.1

Similar Messages

Maybe you are looking for