HOW to reset the windows system on my macbook?

I WANNA TO KNOW HOW TO RESET THE WINDOWS SYSTEM ON MY MACBOOK.
IT'S DUAL SYSTEM.  WINDOWS AND MAC.
MUST I HAVE TO UNINSTALL THE WINDOWS SYSTEM FIRST.THEN RESET?
BUT HOW TO UNINSTALL IT?
BY USING THE INSTALL DVD OR ANYTHING ELSE?
HAVE I NEED TO BACKUP FIRST?
AND HOW TO BACKUP THE FILES IN THE WINDOWS?

While we all have MacBooks in this forum not all of us use BootCamp. There's a BootCamp Support Community where everybody uses BootCamp. You should also post this question there to increase your chances of getting an answer.
https://discussions.apple.com/community/windows_software/boot_camp

Similar Messages

  • How to Reset the EIM \ CIM System "sa" Password Procedure

    All.
    I have posted a document, "How to Reset the EIM \ CIM System "sa" Password Procedure" on this CSC site to assist you w\ the EIM "sa"user password reset procedure.
    I am also posting the procedure and word document attachment here.
    Let me know how helpful the procedure is.
    Bernard
    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Table Normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-parent:"";
    mso-padding-alt:0in 5.4pt 0in 5.4pt;
    mso-para-margin:0in;
    mso-para-margin-bottom:.0001pt;
    mso-pagination:widow-orphan;
    font-size:10.0pt;
    font-family:"Times New Roman";
    mso-ansi-language:#0400;
    mso-fareast-language:#0400;
    mso-bidi-language:#0400;}
    Resetting The CIM \ EIM System “sa” Password Procedure
    Key: ‘ ‘ = Two single quotes.
    The following contain the query for blanking out the SA password for Partition 0 thru the backend.
    1. Go to SQL Server Management Studio and change the database to master database. USE “eGMasterDB”
    2. a. To verify user_name, and select user_id“save the results for backup.
        b. “SELECT user_id, user_name, password, case_insensitive_password FROM egpl_user WHERE user_id = 1”.
    Note: Be sure to save query and results, so that it can be provided for troubleshooting, if there is a problem.
    3. a. For Blanking out the SA password. UPDATE egpl_user WITH (ROWLOCK) SET password = ‘ ‘, case_insensitive_password = ‘ ‘ WHERE user_id = 1
    4. Verify the PW columns are now clear, by re-running the select cmd. “SELECT user_id, user_name, password, case_insensitive_password FROM egpl_user WHERE user_id = 1”.
    Then to successfully access and change CIM \ EIM “sa” User Account. (Partition 0)
    4. Go to login.  //<EIM server ip address>/system/
    5. Login with “sa” as the user name, no password.
    6. Navigate to Administration > Partition: System > Users, and highlight sa user under “List: Users”.
    7. Highlight the “Password” row, on the “General” tab, under “Properties: sa”.
    8. Select the box to the right of row and it will ask if you want to change the password.
    9. Select yes, enter new password.
    10. Save.

    It's great to have these types of procedures published on CSC!  Thanks, Bernard!
    -Paulo

  • How to reset the default window size

    Hi!
    I played around with the different layouts of Adobe Connect Pro and somehow got a real chaos of window sizes and window positions when changing the resolution as well. How can I reset the layout to the default layout settings (window size, window position, which window should appear)? At this moment I cannot move a windows because it's too big to move or resize it.
    Is there a possibility to undo these changes?
    Thank you!
    Best regards,
    Thomas

    Does anyone know how to reset the meeting layout during a running meeting?

  • HT1414 I just tried to reset my iPad...then couldn't reset it.  I don't know how to install the operating system on it again

    I just tried to reset my iPad...then couldn't reset it.  I don't know how to install the operating system on it again

    Is this how you reset?
    1. Hold the Sleep and Home button down (together)
    2. For about 10 seconds
    3. Until you see the Apple logo (very important)
    4. Ignore the red slider

  • How Can I Minimize a VI to an Icon on the Windows System Tray?

    How Can I Minimize a VI to an Icon on the Windows System Tray?

    There are some examples available online, using both ActiveX and .NET. Try searching for "tray icon".
    It's been a while since I looked at it, but if memory serves, the structures needed to load an icon through the Win32 API are actually quite complicated and not as simple as that article makes them out to be.
    Try to take over the world!

  • I forgot my logon passcode, how to reset the or get the new password.

    I forgot my logon passcode, how to reset the or get the new password.

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • Does anyone know how to reset the fan on a MacBook Pro 13-inch (Late 2011) to it's factory setting speed (Maybe Terminal may help?)

    I have a late-2011 13-inch MacBook Pro running OS X Yosemite. (Standard configuration).
    My problem is that I downloaded a fan control application and it worked perfectly, but it started to get annoying so I deleted it.
    Does anyone know how to reset the fan speed back to factory settings (Maybe a command in terminal?)

    Hello damo1177,
    It should help to reset your system's SMC and NVRAM.
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/HT3964
    About NVRAM and PRAM
    http://support.apple.com/kb/HT1379
    Cheers,
    Allen

  • How to reset the password in macbook Pro? This is not related to apple id

    Hi,
    I gave my macbook pro for service. Initially there was no password set up in the system. However the service guys have put some password to install the applications. (This is not related to apple id and apple store apps). Can you please help how to reset the password?
    Regards,
    Arjun K M

    Welcome to Apple Support Communities
    As you have OS X Mountain Lion, try resetting the password from Recovery > http://discussions.apple.com/docs/DOC-4101
    It looks like OS X was reinstalled. After resetting the password, you will be able to log in and use your MacBook Pro

  • How to get the Windows Vista Driver for ATI Radeon 7500 card?

    How to get the Windows Vista Driver for ATI Radeon 7500 card?
    I am using a IBM Thinkpad T42 with a 32Mb ATI Radeon 7500 graphic card AGP.
    Is there any Vista 32-bit driver to update my card so that this system support Aero effect?
    Thank you.
    regards,
    W. Thong

    wthong wrote:
    How to get the Windows Vista Driver for ATI Radeon 7500 card?
    The Radeon 9000 driver works for the Radeon 7500 card.  I have successfully used it on a T43 with Vista Ultimate x86
    wthong wrote:
    Is there any Vista 32-bit driver to update my card so that this system support Aero effect?
    Unfortunately no.  The Radeon 9000 driver should bring your graphics score up to close to 2, but it will not get it high enough to enable Aero support.
    Cheers,
    Bill
    I don't work for Lenovo

  • Where to download and how to install X Window System for Oracle Linux 5 ?

    Folks,
    Hello. I am using Oracle Linux 5 and Oracle Database 11g for PIA.
    Before install Oracle DB 11g into Oracle Linux 5, we need to install X Window System according to the document page 2 http://download.oracle.com/docs/cd/B28359_01/install.111/b32285.pdf
    But I don't know where to download and how to install X Window System for Oracle Linux 5.
    Can any folk provide a link to download X Window System and tutorial to install it for Oracle Linux 5 ?

    You can address the problem in a number of different ways.
    You can install X-windows from the installation DVD or setup access to the Oracle public software repository as described in http://public-yum.oracle.com. In which case, the command to install X-windows is: yum groupinstall "X Window System"
    Or, you login remotely and and use SSH with X-forwarding, in which case the software on the server will use the X-Windows server on your client system. This is probably the preferred way since you do not have X-windows installed on the server. For more details about SSH forwarding and howto, please see Install Oracle 11gR2 on Ubuntu Linux 11.04 (64-bit) Howto part 2 Oracle Universal Installer.

  • How to reset the response status and response header

    Dear Masters
    Actually we are using NTLM Authentication process to get the system login id for our web application. The problem which I am getting is after running the NTLM Authentication Code I am not able to call the action class. It is telling 400 Server error bad request. I am using Struts Dispatch Action Class. In Dispatch Action I will be passing a name (eg. method) as a parameter in struts-config.xml file and using that parameter I will be calling the respective method in the Action class. The problem which I am facing is after running the authentication code I am not able to fire the action class. It is telling the error in the console as "parameter named method is not found". Actually in NTLM Authentication code they are setiing the response status to www-authenticate,NTLM. If I reset the response status back to the normal form I think i will be able to fire the action class. Please give me a suggestion on how to reset the response status and response header back to the normal form. Any solution to this is appreciated. Please respond your reply as soon as possible. Thanks in advance.
    Regards
    Ramesh

    Hi,
    I think, a servlet filter is what you need. Please check the following URLs on how to go about creating a filter.
    http://dev2dev.bea.com/pub/a/2005/05/decorators.html
    http://www.onjava.com/pub/a/onjava/2003/11/19/filters.html
    http://www.onjava.com/pub/a/onjava/2004/03/03/filters.html?page=1
    Cheers,
    vidyut

  • Java daemon on boot: "This user is not allowed access to the window system right now."

    The daemon is located in /Library/LaunchDaemons/ and launches successfully on most occasions. However, it sometimes fails to start with this error:
    Nov 17 20:36:24 server.local java[28972]: This user is not allowed access to the window system right now.
    Nov 17 20:36:24 server com.apple.launchd[1] (net.java.server): Throttling respawn: Will start in 10 seconds
    I have the server command running as a background daemon using its "nogui" option (the developers claim to have written it to not display a gui). However, it seems that somewhere along the line, Java is trying to display something. As the daemon is running before users log in, it gives this error. Once a user is logged in to the system, it runs fine; however, logging in a user to run the server is not an option. It needs to run on boot.
    Any ideas for how to solve this? I'm going to contact the developers to see if it may be something they can fix, but I want to be able to force the issue in case the problem ever occurs in the future.

    Irrespective of any claims by the developer, this certainly appears to be a test case that shows that the tool is not working as expected, and that the application has a bug.  This test case would be better if there was some evidence around why only some of the startups fail, but in general this will involve what's been suggested earlier:  "Contact the application developer."  
    As some general background on what's involved, see daemons and agents and related; processes that are not allowed to connect to the GUI for reasons of security.
    I'd also suggest testing your DNS, as seeing "server.local" can imply local DNS configuration errors.   Launch Terminal.app  from Applications > Utilities and issue the following harmless diagnostic command and see if it reports no changes, or if it detects network or DNS errors:
    sudo changeip -checkhostname
    If this is OS X Server and a NAT'd network, you do not want to reference any DNS servers located off of your NAT'd network.
    Why DNS?  Because DNS errors can cause only some operations to fail, particularly if there's more than one DNS server selected (and where some subset of the DNS servers are malfunctioning or misconfigured).

  • How to reset the military usage value in GTS Business partner

    Hello Experts,
    Does anyone know how to reset the Military usage value='2' to blank on the Business partner within GTS?
    I tried putting a blank there, clicking on the accept entries button followed by  saving the Business partner.
    It does not seem to work this way.
    Does anyone know if it's SAP bug for not having blank as one of the allowable values for the usage except when it's that way while newly created?
    The GTS implementation details are as follows:
    Any help with regard to this will be much appreciated......
    Thanks,
    Prashant.

    Prashant,
    As I already informed you, it is not possible to re-set the indicator to <blank>.
    From the program code, I can see that the usage indicator is only transferred from the feeder system during the creation of a customer partner.  The value in GTS is set either to '1' or '2' during creation, and cannot be changed by any subsequent data transfer from the feeder system.
    I think that logic is related to the fact that usage records may be created for multiple Legal Regulations, and those records may then be changed individually by the user in GTS.  On that basis, it would not be reasonable to over-write the values by re-transferring the customer from the feeder system.
    Regards,
    Dave

  • I can't see my Canon MG5220 printer... Initially I was getting "there is a communication error" so I rebooted everything, reset the printing system, reinstalled the driver and still NO luck! It seems to see the scanner, but never the printer. HELP!

    I can't see my Canon MG5220 printer... Initially I was getting "there is a communication error" so I rebooted everything, reset the printing system, reinstalled the driver and still NO luck! I see no printers available in the Print & Scan area. If I click "+" it seems to see the scanner, but never the printer. HELP!

    The printer component uses a different protocol to advertise itself on the network compared to the scanner component and it can take several seconds longer to appear after the scanner has.
    That said, with the introduction of AirPrint, the MG should be seen as Bonjour Multifunction in the Add Printer window, as shown below.
    Selecting this Bonjour Multifunction entry will create a printer using AirPrint and a scanner using the iCA driver.
    So do you see the MG5220 as Bonjour Multifunction or just Bonjour?

  • How to Change the Windows Title in EP7.0

    Hi
    Can anyone provide some pointers on how to change the windows title bar in EP 6.0
    We would like to remove the words "SAP Netweaver Portal" from the title.
    I have found OSS note  695903 however this refers to EP6.0
    Thanks in advance.
    Ian

    Hi,
    For people who have no access to the note, here are the steps involved. The same steps are listed in the note :
    1) Logon to your portal with your user who has super_admin role.
    2) Go to the System Administration tab -> System Configuration tab.
    3) Go to the Service Configuration -> Central Configuration.
    4) Change the portal.html.head.title part. Do no forget to save the changes you made.
    5) Restart the j2ee server to be able to see the changes on the portal
    Cheers,
    Sunil

Maybe you are looking for