How to restore a filtered wave ?

I collect a vibration signal from a rotor,then will calculate the relative phase to a benchmark.
first I use the "windowed FIR Filter" to filter the signal to except the signal above work frequency
the use the filtered signal to calculate ,but the
filtered signal's wave is poor,I don't know hoe to
restore it in order to get the valid wave to crosscorelation.I post my VI.
Attachments:
指点请.vi ‏124 KB

Greetings:
Indeed, windowed functions are NOT fully recoverable...it's analogous to using a lossy compression code. If you've tried using all the inverse functions, and it still doesn't work, you might try capturing the data without a window, and using a frequency domain filter before any FFT conversions. YOur results won't have the "Brick Wall" that a window does, but still might be usable.
Just a suggestion
ERic
Eric P. Nichols
P.O. Box 56235
North Pole, AK 99705

Similar Messages

How to restore an overwritten wav file?

I was recently working on a project and i accidently unplugged my hard drive from my pc, when i came back to work on my project again my recorded audio was playing in skips, i then soon realized my hard drive was unplugged, but when i went to plug it back in, it didnt fix the problem, so i decided to close audition, but when it asked my if i wanted to save the project i clicked on yes, which was my BIGGEST mistake, because it saved my audio file also, not my project, so now my audio file is playing in skips, so i was wondering if anyone could help me find a way to restore my audio file back to its original format!!? i tried finding the temp file but i didnt have any!!
please someone help me, i need my audio file back!!

If it is playing in skips then there must be must be some remnants of the file somewhere for Audition to attempt to play it.. Where does Audition think it is playing it from? If it is playing back audio with the hard drive unplugged the file must have been stored somewhere else. Where did the original audio file come from?
But the file on the removable drive could very well have been damaged by unplugging the hard drive before it was closed. In which case there is virtually no hope of retrieving the complete audio file from there.

How to restore old prefs, etc after clean reinstall of 10.3.9?

Due to a fiasco with Drive Genius I was forced to reformat and reinstall 10.3.9. Luckly, I was bright enough to manually copy over the entire contents of the drive to a firewire drive before I started the drive genius project.
I was able to find directions on how to restore my users which worked perfectly.
I've copied all the apps back. But all the apps were in the main drive rather than in users, so the prefs, registrations etc are, I assume, stored in the old library.
Is there a way to replace the new library with the original to avoid several days work digging out the original packaging to get the serial numbers for re-entering so I can get back to work right away?

The serial #s, etc were in fact in the original main library. I was able to restore the use of all the programs by manually replacing the missing items in each folder in the library. It took over an hour, but I got it all back and saved me from having to rummage through storage boxes for the original documentation to retrieve and re-enter all the info.

N8: How to restore music store widget after hard r...

Hi
I lost all nokia N8 widgets including Music store after I hard reset my N8.
I have really been searching but have been unable to find a work around for this. I am unable to play any OVI music on my phone as it searched for a license and ends up saying that this is not my registered device.
I really need some help.
Nokia care has failed to solve my problewm so far.
HELP!
MODERATOR'S NOTE: We have edited your post. Please refrain from posting irrelevant characters. Posting with a brief and concise concern would be enough to gather solution.

I have been able to restore everything....except the Ovi Music Widget after a hardreset.
This might help -
http://www.nokian8blog.info/2011/06/how-to-restore-ovi-music-unlimited.html

Dissapeared footer (where is written what page is loading and so on) how to restore it?

Dissapeared footer (where is written what page is loading and so on) how to restore it?
there is the screenshot ( http://j.imagehost.org/0213/Clipboard03.jpg )

View > Statusbar = click it

How to restore my ipad?My ipad say on screen CONNECT TO ITUNE.How can i do when i connect with computer.It is need itune new version.Can you sent me.I will be waiting your answer.Please help me sir.

How to restore my ipad?My ipad say on screen CONNECT TO ITUNE.How can i do when i connect with computer.It is need itune new version.Can you sent me.I will be waiting your answer.Please help me sir.

Check for Updates.
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%208/78d42b19fa42e8d83b5 5a65e1333373f_zpsf58bbe10.jpg

My macbook pro's screen display has suddenly gone into a strange colour setting where everything appears in a kind of infrared colour palette an I can;t seem to change it back. It's the same for all icon and websites, does anyone know how to restore?

My macbook pro's screen display has suddenly gone into a strange colour setting where everything appears in a kind of infrared colour palette an I can;t seem to change it back. It's the same for all icon and websites, does anyone know how to restore?

Wow! I think I had this same issue just last night.
I was cleaning my macbook pro retina on the outside. Then I opened it up and was wiping dust off the monitor and I can't pinpoint exactly when, but the colors changed suddenly. It looked super strange, it was like green halo's and it looked worse when looking at it at an angle. Of course I took no pictures!!! I was freaking out that my 2 grand laptop was busted and I somehow removed a protective film or something.
But I digress... The image looked very green and spacey, it was almost a neat effect. After about 5 minutes it started to look a little more digital though. There were straight lines of this halo effect on the edges and top. After about 10 minutes it turned into a predominate issue with the blacks on screen. I could open a web browser and it was unnoticable on a white background. After about 15 minutes, you could only barely see the green cloud effect if you looked at the monitor from an extreme angle. After about 20 minutes, it was completely back to normal, I almost feel paranoid like I see a halo or something strange. But I believe that might be all in my head now.
So yerp, lemme know what you guys figure out.

My old phone broke and I am having trouble figuring out how to restore my contacts on my "new" phone (LG ENV2 Black)...

My old phone broke and I am having trouble figuring out how to restore my contacts on my "new" phone (LG ENV2 Black). Apparently the phone is so old that I am unable to install Backup Assistant on it, which sucks. I have all my old contacts saved on my computer as a CSV and also another copy on a micro SD as VCF. I have tried moving the CSV from my computer to my ENV2 via both Bluetooth and USB cable, but had no luck with either of those. I also tried to pop the micro SD into the ENV2, and although I can load all my old pictures/videos/etc. from the micro SD, I do not seem to be able to restore the contacts from card. I know there has to be some way to manually transfer these files; the contacts are still on my old phone as well; but I was unable to use the transfer wizard for that because my old phonedoesn't seem to be supported by that (Pantech Jester 2)

Google a program called bitpim, that might do what you want. Never used it but it's been talked about on the forums. Other than that you might have to input them manually. Mary

Any ideas about how to restore old appearance on my iPhone? I just updated to IOS7 and really dislike the new appearance. I have to log on to see percentage of power used since I can't see it on my opening screen. I also want the gray folders back.

I just updated to ios7 and do not like the redesign. I want the old design back. Has anyone found out how to restore the old appearance. I do not understand why the change. I now have to unlock my phone to be able to check my battery level because my screensaver has a light color in the upper corner and I can't read the text. I want the gray panel back.

See Recover your iTunes library from your iPod or iOS device.
tt2

HT4623 my iphone has been erased and i do not know how to restore it?

my iphone has been erased and i do not know how to restore it help please?

Connect it to the computer that it normally syncs with and select restore in iTunes.
This is also covered in the Users guide if you want/need specific details. Try reading the users guide before asking more basic functionality questions.

How to do sorting/filtering on custom java data source implementation

Hi,
I have an entity driven view object whose data should be retrieved and populated using custom java data source implementation. I've done the same as said in document. I understand that Query mode should be the default one (i.e. database tables) and createRowFromResultSet will be called as many times as it needs based on the no. of data retrieved from service, provided we should write the logic for hasNextForCollection(). Implementation sample code is given below.
protected void executeQueryForCollection(Object qc, Object[] params, int noUserParams) {
Iterator datumItr = retrieveDataFromService(qc, params);
setUserDataForCollection(qc, datumItr);
hasNextForCollection(qc);
super.executeQueryForCollection(qc, params, noUserParams);
protected boolean hasNextForCollection(Object qc) {
Iterator datumItr = (Iterator) getUserDataForCollection(qc);
if (datumItr != null && datumItr.hasNext()){
return true;
setCallService(false);
setFetchCompleteForCollection(qc, true);
return false;
protected ViewRowImpl createRowFromResultSet(Object qc, ResultSet resultSet) {
Iterator datumItr = (Iterator) getUserDataForCollection(qc);
Object datumObj = datumItr.next();
ViewRowImpl r = createNewRowForCollection(qc);
return r;
Everything is working fine include table sorting/filtering. Then i noticed that everytime when user perform sorting/filtering, executeQueryForCollection is called, which in turn calls my service. It is a performance issue. I want to avoid. So i did some modification in the implementation in such a way that, service call will happen only if the callService flag is set to true, followed by executeQuery(). Code is given below.
private boolean callService = false;
public void setCallService(boolean callService){
this.callService = callService;
public boolean isCallService(){
return callService;
protected void executeQueryForCollection(Object qc, Object[] params, int noUserParams){
if (callService)
Iterator datumItr = retrieveDataFromService(qc, params);
setUserDataForCollection(qc, datumItr);
hasNextForCollection(qc);
super.executeQueryForCollection(qc, params, noUserParams);
Issue i have:
When user attempts to use table sort/filter, since i skipped the service call and set null as userDataCollection, createRowFromResultSet is not called and data which i retrieved and populated to view object is totally got vanished!!. I've already retrived data and created row from result set. Why it should get vanished? Don't know why.
Tried solution:
I came to know that query mode should be set to Scan_Entity_Cache for filtering and Scan_View_Rows for sorting. I din't disturb the implementation (i.e. skipping service call) but overrided the executeQuery and did like the following code.
@Override
public void executeQuery(){
setQueryMode(callService ? ViewObject.QUERY_MODE_SCAN_DATABASE_TABLES : ViewObject.QUERY_MODE_SCAN_ENTITY_ROWS);
super.executeQuery();
By doing this, i could able to do table filtering but when i try to use table sorting or programmatic sorting, sorting is not at all applied.
I changed the code like beolw*
@Override
public void executeQuery(){
setQueryMode(callService ? ViewObject.QUERY_MODE_SCAN_DATABASE_TABLES : ViewObject.QUERY_MODE_SCAN_VIEW_ROWS);
super.executeQuery();
Now sorting is working fine but filtering is not working in an expected way because Scan_View_rows will do further filtering of view rows.
Question:
I don't know how to achieve both filtering and sorting as well as skipping of service call too.
Can anyone help on this?? Thanks in advance.
Raguraman

Hi,
I have an entity driven view object whose data should be retrieved and populated using custom java data source implementation. I've done the same as said in document. I understand that Query mode should be the default one (i.e. database tables) and createRowFromResultSet will be called as many times as it needs based on the no. of data retrieved from service, provided we should write the logic for hasNextForCollection(). Implementation sample code is given below.
protected void executeQueryForCollection(Object qc, Object[] params, int noUserParams) {
Iterator datumItr = retrieveDataFromService(qc, params);
setUserDataForCollection(qc, datumItr);
hasNextForCollection(qc);
super.executeQueryForCollection(qc, params, noUserParams);
protected boolean hasNextForCollection(Object qc) {
Iterator datumItr = (Iterator) getUserDataForCollection(qc);
if (datumItr != null && datumItr.hasNext()){
    return true;
setFetchCompleteForCollection(qc, true);
return false;
protected ViewRowImpl createRowFromResultSet(Object qc, ResultSet resultSet) {
Iterator datumItr = (Iterator) getUserDataForCollection(qc);
Object datumObj = datumItr.next();
ViewRowImpl r = createNewRowForCollection(qc);
return r;
}Everything is working fine include table sorting/filtering. Then i noticed that everytime when user perform sorting/filtering, executeQueryForCollection is called, which in turn calls my service. It is a performance issue. I want to avoid. So i did some modification in the implementation in such a way that, service call will happen only if the callService flag is set to true, followed by executeQuery(). Code is given below.
private boolean callService = false;
public void setCallService(boolean callService){
this.callService = callService;
public boolean isCallService(){
return callService;
protected void executeQueryForCollection(Object qc, Object[] params, int noUserParams){
if (callService) {
    Iterator datumItr = retrieveDataFromService(qc, params);
    setUserDataForCollection(qc, datumItr);
hasNextForCollection(qc);
super.executeQueryForCollection(qc, params, noUserParams);
}Issue i have:
When user attempts to use table sort/filter, since i skipped the service call and storing of userDataCollection, createRowFromResultSet is not called and data which i retrieved and populated to view object is totally got vanished!!. I've already retrived data and created row from result set. Why it should get vanished? Don't know why.
Tried solution:
I came to know that query mode should be set to Scan_Entity_Cache for filtering and Scan_View_Rows for sorting. I din't disturb the implementation (i.e. skipping service call) but overrided the executeQuery and did like the following code.
@Override
public void executeQuery(){
setQueryMode(callService ? ViewObject.QUERY_MODE_SCAN_DATABASE_TABLES : ViewObject.QUERY_MODE_SCAN_ENTITY_ROWS);
super.executeQuery();
}By doing this, i could able to do table filtering but when i try to use table sorting or programmatic sorting, sorting is not at all getting applied.
I changed the code like below one (i.e. changed to ViewObject.QUERY_MODE_SCAN_VIEW_ROWS instead of ViewObject.QUERY_MODE_SCAN_ENTITY_ROWS)
@Override
public void executeQuery(){
setQueryMode(callService ? ViewObject.QUERY_MODE_SCAN_DATABASE_TABLES : ViewObject.QUERY_MODE_SCAN_VIEW_ROWS);
super.executeQuery();
}Now sorting is working fine but filtering is not working in an expected way because Scan_View_rows will do further filtering of view rows.
If i OR'ed the Query Mode as given below, i am getting duplicate rows. (vewObject.QUERY_MODE_SCAN_ENTITY_ROWS | ViewObject.QUERY_MODE_SCAN_VIEW_ROWS) Question:
I don't know how to achieve both filtering and sorting as well as skipping of service call too.
Can anyone help on this?? Thanks in advance.
Raguraman
Edited by: Raguraman on Apr 12, 2011 6:53 AM

Hi All, I am using iphone in UAE and ipad in India usinging same apple id. Earlier I could do imessage to my Ipad with different name but with software update,I am unable to do, as signing id for the iphone and ipad is same.How to restore back

Hi All, I am using iphone in UAE and ipad in India usinging same apple id. Earlier I could do imessage to my Ipad with different name but with software update,I am unable to do, as signing id for the iphone and ipad is same.How to restore back

I believe because you migrated from a Nokia to an iPhone you need to register the Bn phone number with your Apple ID so it can be used for iMessage. The Pn number seems to be the only one registered
Go here > https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
Manage your Apple ID and see if that does the trick
Hope that helps

How to restore my iPhone , no internet , I cloud setting on and forgot passcode

I Have an iPhone 4
I can't remember my passcode so My phones disabled
i have my iCloud setting on but not internet so I can't restore via find my laptop or find my iPhone
Please can someone tell me how to restore my phone or atleast get into it
MANY THANKS SHANNON

shannonMer wrote:
I Have an iPhone 4
I can't remember my passcode so My phones disabled
i have my iCloud setting on but not internet so I can't restore via find my laptop or find my iPhone
Please can someone tell me how to restore my phone or atleast get into it
MANY THANKS SHANNON
Take your laptop to somewhere that has wifi so you can restore your phone using iTunes.
Nothing else you can do if you forgot your passcode and don't have internet.
Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
How are you able to post on this forum if you have no internet?

How to restore my Macbook Pro

Does anyone knows how to restore a Macbook Pro?

If you mean erase the drive and reinstall the Mac OS X read here > Mac OS X 10.6 Help: Reinstalling Mac OS X

How can I find my password for iTunes? Forgot it and can't see how to restore or change

How can I find my password for iTunes? Forgot it and can't see how to restore or change it. It is not the same as the apple id password - or so my iPhone iTunes says - Help

I don't want to reset my apple ID password. I know it's right. It doesn't work on Itunes to restore my phone. All the passwords I know are not working. I want to know why.

How to restore a filtered wave ?

Similar Messages

Maybe you are looking for