How to restore after crash

I had imported hundreds of loops into my version of soundtrack (the ancient 1.2) and painstakingly labeled them by genre and descriptors.
I had a computer crash (but have an exact clone of the crashed hard drive)
although all of the loops are back in my documents - none of them show up in ST.
Is there a document or preferences I can import into the new hard drive to regain all of that info?

I am the original poster with a clarification. In soundtrack loop utility I can open any of the loops I had previously imported - but are now not recognized by ST.
And all of the descriptors are there.
But the <save> option is grayed out - so for some reason it is not letting me re-import them.

Similar Messages

  • How to restore after disk replacement?

    l just had my iMac hard disk replaced due a recall.  Before taking it in I made a disk image with disk Utility and securely erased the disk.  I also have Time Machine back-ups going back several months.  On getting the machine back, since it contains sensitive data securely erased the new hard disk and started up with the Snow Leopard boot disk.  When I tried to scan the disk for reinstall I get an error "Unable to scan 'image name' (internal error)".  I tried several times with the same result.  I then tried to restore from Time Machine and got a message that No Mac OS X backups were found."
    I installed Snow Leopard and again tried both approaches with the same result.  I can see to Time Machine backups on the disk but when I restore it simply copies the files into "/Volumes.  Anyone have ideas on how to restore the system?

    Rodocki wrote:
    The disk image did not.  Not sure what's wrong with the disk image burn and restore process but it is clearly not dependable.
    Unless you tested and restored it after making it, it's a poor choice, since it requires three volumes: the boot volume, source volume, and a destination volume. A bootable backup/clone made with Carbon Copy Cloner or SuperDuper! is a much better choice. BTW, it's also significantly faster to restore one of these than it is to restore a disk image.

  • Trying to restore after crash and rebuild but Time Machine isn't seeing my NAS drive.

    My MacBook Pro had it's first crash in 6 years or daily use and abuse. Came home from work and had the "You need to restart your mac, hold down the power button" screen in 10 languages. After a heart attack, a visit the the neighborhood bar for a couple shots, I came home and spent most of the night troubleshooting:
    wouldn't boot in safe mode (holding down shift...just sat there with the grey apple and spinning icon for hours)
    booted off OS disc and ran Disc Utility (it said everything was fine)
    booted with hardware test off install disc and ran extended test (said everything was fine)
    Still wouldn't boot off hardrive, so I gave up and said "hey, this is why I spent hundreds on the backup drive and have been running Time Machine for a month, so I'll just wipe it clean and restore." Well...here's where the fun begins:
    Erased the disc and reloaded Snow Leopard. All seems to be working fine. Mac sees the Buffalo Linkstation Duo drive just fine, can copy info back and forth...all's good. I reboot using the Snow Leopard disk and go to Utilities/Restore ... and the drive isn't there to restore from. The drive is obviously operating fine...this is an issue with Time Machine (likely one of Apple's 'If you don't buy our product we're going to make it really hard for you" type of things).
    Any Ideas on how to get it to show up?
    Thanks

    Thanks baltwo
    I saw Pondini's comments on several posts that were related but either not quite the same issue, or noone had figured out the solution yet. I think I may have it solved though.
    I found a couple posts elsewhere that laid out some clear solutions. I tried them and they appear to have worked...it's working on a restore now, it says two hours left so I'll know soon.
    The big part I was missing was how to mount the drive from Terminal when working off the OS disc. After booting regularly off the harddrive, I was able to connect to the NAS using terminal with SMB://ipaddress ... and it would even stay connected after regular reboot...however after rebooting using the CD is no longer saw the NAS, not in Time Machine or Disk Utility or System Profile. I tried smb again using the Terminal in the Utilities menu but it wouldn't accept it.
    I found this info on how to mount and it worked like a charm...http://hints.macworld.com/article.php?story=2009103103534090  .... then TimeMachine saw the drive and everything so far has gone smoothly.
    I did bookmark Pondini's site for forther reading later, seemed to have some good info there.

  • Any Other Dinosaurs Out There?  Need PhotoDeluxe Business Edition 1.0 Help (Restore after Crash)

    I'm still using BE 1.0 and very happy with it, but in rare instances it crashes. It leaves behind a file named ~PDTnnnn.tmp in my "...\Local Settings\Temp" folder. Is it possible to restore the session from this file?

    Bob,
    I have no idea how this topic was revived - that is, procedurally. In the course of answering many posts, I started an e-mail correspondence with a guy who still uses PBE 1.0. I e-mailed him a message on a new glitch in PBE (leaving artifacts when moving text or cutting and pasting selections within an image). I haven't heard from him since I did so. Perhaps, somehow, my message to him became a new post. How that would occur is beyond me, but I've been in the computer business long enough that nothing much surprises me anymore.
    I believed your assertion ("No. Trash the file. Bob") from the moment I read it because, operating in a Windows world, I knew that not many utilities are built to recover from fatal errors. I prefer the UNIX/Linux world where that's usually one of the initial design considerations.
    I also prefer UNIX/Linux because things tend to work as advertised more often, and often more quickly. In the process of creating a flyer for a new restaurant in my area, I started out using PBE under WinXP Pro SP2, but it left the artifacts I mentioned above when I moved text. I switched to GIMP and, after much delay in learning it, finally produced a flyer that looked great on "print preview".
    However, on printing, I got only a tiny upper-left corner, much magnified, of the flyer. I checked every setting that might even remotely affect the pixels-per-inch ratio. Tinkering with them made no difference. I salvaged the project by writing the GIMP image as a PNG file, then opening it in PBE and printing it.
    When the flyer was successfully used, the restaurant owner wanted a slight modification to change it from special- to general-purpose. I booted Ubuntu Linux, ran GIMP there, opened the special-purpose PNG file, completed the edits in mere minutes, and printed in the desired "zoom" on letter-size paper using the same GIMP settings that, in the Windows version, would have produced an impressive stand-up cardboard flyer for a movie-theater lobby. (Whew! I haven't written a sentence that long since my undergraduate sixth-semester English Literature midterm paper.)
    All this verbage is a way of saying that you put the original question to bed long ago in your original post. I'm learning a great deal about image processing in both the WinXP and the Ubuntu worlds, which is intellectually satisfying since I once worked two consecutive jobs where I manipulated images, both with software I wrote to convert between image formats and with a custom-written binary-file editor to convert a scanned image file to one which could be inserted into any stream to any printer.
    However, I can't afford to spend that this much time on image editing because my real strength and my employment objective lies in creating special-purpose software in the UNIX-flavored world somewhere in the Florida Panhandle, near but not home (I'm the bayou variety).
    Thanks for keeping an eye on posts, and for your definitive help at the outset.
    - 'Gator sends

  • DC on VM Restored after crash - Does Not allow PCs to Join Domain, or Domain Users to Log in

    We currently had a RAID array crash and rebuilt our main server which housed VMs for our Web and DC.
    The main server was restored from a bare-metal backup from 6 months prior to the latest backup of the VMs (not sure if pertinent)
    Since the Restore, Domain computers cannot access file shares on the main server or VMs - "unspecified network error
    0x80004005
    Removed the main server from the Domain to re-join it due to some issues with logging in (even with a Domain Admin account) - Found that any PC removed from the domain was no longer able
    to rejoin - Receive (Network path was not found error)
    Domain Users cannot log in to their computers - Error reads "The trust relationship between this computer and the domain has been lost" - Domain Admin accounts can log in without
    problem.
    Have been working on it for two weeks and tried most of the things that I have found in others questions for related 
    DCDIAG results (run on DC VM) - More errors appear if run on the Server (Locator DcGetDcName(GC_Server_Required) call failed, error 1722 (same for PDC, TIME, GOOD_TIME, and KDC)
    Directory Server Diagnosis
    Performing initial setup:
       Trying to find home server...
       Home Server = DC1
       * Identified AD Forest. 
       Done gathering initial info.
    Doing initial required tests
       Testing server: Default-First-Site-Name\DC1
          Starting test: Connectivity
             ......................... DC1 passed test Connectivity
    Doing primary tests
       Testing server: Default-First-Site-Name\DC1
          Starting test: Advertising
             ......................... DC1 passed test Advertising
          Starting test: FrsEvent
             There are warning or error events within the last 24 hours after the
             SYSVOL has been shared.  Failing SYSVOL replication problems may cause
             Group Policy problems. 
             ......................... DC1 failed test FrsEvent
          Starting test: DFSREvent
             ......................... DC1 passed test DFSREvent
          Starting test: SysVolCheck
             ......................... DC1 passed test SysVolCheck
          Starting test: KccEvent
             ......................... DC1 passed test KccEvent
          Starting test: KnowsOfRoleHolders
             ......................... DC1 passed test KnowsOfRoleHolders
          Starting test: MachineAccount
             ......................... DC1 passed test MachineAccount
          Starting test: NCSecDesc
             ......................... DC1 passed test NCSecDesc
          Starting test: NetLogons
             ......................... DC1 passed test NetLogons
          Starting test: ObjectsReplicated
             ......................... DC1 passed test ObjectsReplicated
          Starting test: Replications
             ......................... DC1 passed test Replications
          Starting test: RidManager
             ......................... DC1 passed test RidManager
          Starting test: Services
             ......................... DC1 passed test Services
          Starting test: SystemLog
             A warning event occurred.  EventID: 0x80040022
                Time Generated: 01/15/2015   19:32:28
                Event String:
                The driver disabled the write cache on device \Device\Harddisk0\DR0.
             A warning event occurred.  EventID: 0x80040022
                Time Generated: 01/15/2015   19:32:28
                Event String:
                The driver disabled the write cache on device \Device\Harddisk0\DR0.
             A warning event occurred.  EventID: 0x80040022
                Time Generated: 01/15/2015   19:32:28
                Event String:
                The driver disabled the write cache on device \Device\Harddisk0\DR0.
             A warning event occurred.  EventID: 0x000003F6
                Time Generated: 01/15/2015   19:32:52
                Event String:
                Name resolution for the name DC1.Home.xxx.com timed out after none of the configured DNS servers responded.
             An error event occurred.  EventID: 0xC00038D6
                Time Generated: 01/15/2015   19:33:25
                Event String:
                The DFS Namespace service could not initialize cross forest trust information on this domain controller, but it will periodically retry the operation. The return code is in the record data.
             A warning event occurred.  EventID: 0x00000420
                Time Generated: 01/15/2015   19:33:29
                Event String:
                The DHCP service has detected that it is running on a DC and has no credentials configured for use with Dynamic DNS registrations initiated by the DHCP service.   This is not a recommended security configuration.
     Credentials for Dynamic DNS registrations may be configured using the command line "netsh dhcp server set dnscredentials" or via the DHCP Administrative tool.
             A warning event occurred.  EventID: 0x00002724
                Time Generated: 01/15/2015   19:33:33
                Event String:
                This computer has at least one dynamically assigned IPv6 address.For reliable DHCPv6 server operation, you should use only static IPv6 addresses.
             A warning event occurred.  EventID: 0x000727AA
                Time Generated: 01/15/2015   19:36:34
                Event String:
                The WinRM service failed to create the following SPNs: WSMAN/DC1.Home.xxx.com; WSMAN/DC1. 
             A warning event occurred.  EventID: 0x00001695
                Time Generated: 01/15/2015   19:59:52
                Event String:
                Dynamic registration or deletion of one or more DNS records associated with DNS domain 'Home.xxx.com.' failed.  These records are used by other computers to locate this server as a domain controller (if the specified
    domain is an Active Directory domain) or as an LDAP server (if the specified domain is an application partition).  
             A warning event occurred.  EventID: 0x00001695
                Time Generated: 01/15/2015   19:59:52
                Event String:
                Dynamic registration or deletion of one or more DNS records associated with DNS domain 'DomainDnsZones.Home.xxx.com.' failed.  These records are used by other computers to locate this server as a domain controller
    (if the specified domain is an Active Directory domain) or as an LDAP server (if the specified domain is an application partition).  
             A warning event occurred.  EventID: 0x00001695
                Time Generated: 01/15/2015   19:59:52
                Event String:
                Dynamic registration or deletion of one or more DNS records associated with DNS domain 'ForestDnsZones.Home.xxx.com.' failed.  These records are used by other computers to locate this server as a domain controller
    (if the specified domain is an Active Directory domain) or as an LDAP server (if the specified domain is an application partition).  
             A warning event occurred.  EventID: 0x00000420
                Time Generated: 01/15/2015   20:20:21
                Event String:
                The DHCP service has detected that it is running on a DC and has no credentials configured for use with Dynamic DNS registrations initiated by the DHCP service.   This is not a recommended security configuration.
     Credentials for Dynamic DNS registrations may be configured using the command line "netsh dhcp server set dnscredentials" or via the DHCP Administrative tool.
             A warning event occurred.  EventID: 0x00002724
                Time Generated: 01/15/2015   20:20:25
                Event String:
                This computer has at least one dynamically assigned IPv6 address.For reliable DHCPv6 server operation, you should use only static IPv6 addresses.
             ......................... DC1 failed test SystemLog
          Starting test: VerifyReferences
             ......................... DC1 passed test VerifyReferences
       Running partition tests on : ForestDnsZones
          Starting test: CheckSDRefDom
             ......................... ForestDnsZones passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... ForestDnsZones passed test
             CrossRefValidation
       Running partition tests on : DomainDnsZones
          Starting test: CheckSDRefDom
             ......................... DomainDnsZones passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... DomainDnsZones passed test
             CrossRefValidation
       Running partition tests on : Schema
          Starting test: CheckSDRefDom
             ......................... Schema passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... Schema passed test CrossRefValidation
       Running partition tests on : Configuration
          Starting test: CheckSDRefDom
             ......................... Configuration passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... Configuration passed test CrossRefValidation
       Running partition tests on : Home
          Starting test: CheckSDRefDom
             ......................... Home passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... Home passed test CrossRefValidation
       Running enterprise tests on : Home.xxx.com
          Starting test: LocatorCheck
             ......................... Home.xxx.com passed test LocatorCheck
          Starting test: Intersite
             ......................... Home.xxx.com passed test Intersite
    All PCs can ping the DC, and get name resolution.  Checked IPs, DNS on both WS and DC (DC points to its own IP address with no other DNS), Forwarders for DNS appear to be working,
    as normal DNS name resolution and internet access works on all PCs.  Have tried disabling NIC card and installing another NIC.  All searches keep pointing back at the same things that I have tried.  I feel like I am missing something stupid.
     Please help

    The backup you used is too old. That is why your clients are experiencing trust relationship failures: the computer passwords are no longer matching so they are failing to connect to AD. You need to disjoin and join them again.
    I understand that this is the only DC you have so please make sure that the DC is not multihomed, that it points to its private IP address as primary DNS server and 127.0.0.1 as secondary one. Also, you might need to rebuild your SYSVOL folder if you keep
    getting the SYSVOL errors: https://support.microsoft.com/kb/315457?wa=wsignin1.0
    This posting is provided AS IS with no warranties or guarantees , and confers no rights.
    Ahmed MALEK
    My Website Link
    My Linkedin Profile
    My MVP Profile

  • How to restore after clean install(manually)?

    Hi everyone,
    I had done a clean install from 10.8.5 to 10.9.3, but I do't want using migration assistant to help restore, I just want to restore some data and my account & ID I had typed in the setup screen by myself
    HERE IS WHAT I WANT TO RESTORE:
    Garage band all audio&loop(I don't want download from internet again, my internet is slow..), because last time I restore the app but it showed that i need to download a 1.6gb file for the audio&loop file
    game save
    iTunes song
    Reminder & Note file, I forgot to export the reminder's list, but I don't want to restore the reminder & note app from Time Machine , but just the user file
    AND ALSO:
    How to export and import back iMovie project?- Last time, I just copy the iMovie Project and event folder to my external HDD, but now i put back to movie it say file is missing! And is there any way not to create project and event in my mac's internal hard drive but create everything in external HDD so everything about my video editing will not fill my internal HDD?
    RAM fast to fill up after upgrade to maverick from the trusty mountain lion, is this normal(4gb ram 1600 MHz), some time even some small app(iWork, small game, etc), i using memory clean.
    I forget to download a other copy of mountain lion when my mac was 10.8.5, now i don't see any of it in app store purchase page, but I have a backup in time machine but soon will gone if it fill up, how to download a other copy again? Or how to take out the 10.8.5 in my time machine to become a OS not just a back up of system? If I never click the mountain lion in mac app store, does this mean I never purchase a 10.8 system even my mac early is come with mountain lion?

    Try using the Time Machine application for your selective restore.
    1. You should be able to store all your iMovie projects on the external.
    2. Mavericks normally uses all the RAM to operate faster. Don't use Memory Clean. The OS will release RAM as required.
    3. If your Mac came with Mountain Lion pre-installed, it won't show as a Purchase from the App Store.

  • Can't get icloud to restore after crash from ios 8.1 update, says server not avaible, any suggestions?

    Had ipad2 crash during ios 8.1 update, tried different things to make it work, ended up booting as new.  Tried on a couple different days to restore from clould and it says server  not avaible, would love to get the info back, any suggestions?

    Can someone tell me the implications of using the command RESET DATABASE on my system days after I did the open reset logs? I opened the database with the ALTER DATABASE OPEN RESETLOGS in SQL not RMAN and I see the below note.....
    Re: Can't get dataguard to recover after SAN crash.
    To reset the incarnation of the target database in the RMAN repository, which means to do either of the following actions:
    •Inform RMAN that the SQL statement ALTER DATABASE OPEN RESETLOGS has been executed and that a new incarnation of the target database has been created. Note that if you run the RMAN command ALTER DATABASE OPEN RESETLOGS (not the SQL statement with the same keywords), then RMAN resets the target database automatically so that you do not have to run RESET DATABASE. By resetting the database, RMAN considers the new incarnation as the current incarnation of the database.

  • MCNB / RMCBINIT-BW how to restart after crash ?

    Hello Gurus all,
    I have run RMCBINIT-BW to initialise stocks on ECC6 for 2LIS_03_BX.
    Unfortunately the programme crashed after ten minutes due to a system error (not enough memory).
    QUESTIONS :
    How should  I  restart the program again using  the same selections ? - Should I activate the NEW RUN checkbox or not ?
    How can I be sure I wil not get something left over from the crashed run ? -Is it possible to purge a run individually from the setup tables ?
    Thanks
    James

    Hi
    MC03BX0SETUP is  completeley empty ( since LBWG) so all is OK.
    One last thing : So maybe I don't need to select  the 'NEW.. ' checkbox when I run it again ?
    What is the fuction of the checkbox ? does it delete the run from MC03BX0SETUP  or does it append, or what ?
    thanks again
    James

  • HT4859 How to Restore after phone update

    How do I access and restore my phone after this update.

    It is the same process like under iOS 5. Restore and then choose the backup during the set up process.

  • Time machine restore after crashed internal drive

    The internal drive on my daughter's MacBook crashed. She had been using Time Machine during the school year, so we have backups that are a little over a month old. I am a bit confused by the different Time Machine restore methods. When I originally set up Time Machine, I first set up 2 partitions on the external drive. The first was an image of the system at that date created by Restore. The second partition was used by Time Machine. I installed a new hard drive in the MacBook. I then did a Restore from the external drive of the System Image. What is the best way to restore to her last Time Machine backup? I want to make sure she has all of her class notes and papers in the restored system. It appears from reading some of the discussions, I could have just done an installation from the install DVD and then used the Migration Assistant to restore from time Machine. Is this preferred. As her system was originally a Tiger that we upgraded to Leopard. I have been considering doing a clean install of Leopard and then a restore from Migration Assistant. If I do that, is it better to do the clean install of Leopard, then Migration Assistant, and then install Ilife 08? Will that bring over the programs she has downloaded? Is there software or anything we would loose from the by doing a clean install from Leopard and iLife08 that is bundled only in the factory install disks? I would like to do this the best way possible and am looking for suggestions.

    moretoexplore wrote:
    I'm getting ready to install a new 1TB internal drive for my iMac and trying to determine the best way to do my system restore. I have two questions...
    Question #1: Should I use Time Machine to restore my data, etc, to my new internal hard drive? Is this the best way to accomplish this or should I start fresh and restore everything manually?
    that's up to you. the easiest is to restore from TM. if you are having problems with your current system you can do a manual restore but it's a lot more work.
    Question #2: I have two external drives. One is used only for iMovie Events (1TB) and the other is used for Time Machine backups (2TB). I use Time Machine to back up both the internal drive (soon to be 1TB) and the 1TB external drive (once again, my iMovie Events). If I use Time Machine to restore, can I restore only those files that were associated with the internal drive?
    yes. the easiest option is to do a full system restore which will restore your system drive. to do that boot from the leopard install DVD and choose 'restore system from backup" from the Utilities menu at the top. you don't need to install leopard on the new drive first. the drive can be blank.

  • How to restore illustrator file after crash?

    how to restore adobe illustrator files after crash OS win 8, and I could backup

    To enable us to help you better, you need to provide as many details as you can about the problem you are experiencing.
    If you design your question effectively, you can get good information from people who are knowledgeable about the topic and who are happy to help you.
    Prepare your question. Think it through. Hasty-sounding questions get hasty answers, or none at all.
    What troubleshooting have you done so far?
    Asking an effective question will get you help faster read how here
    Suggestions for asking for help on a site.
    http://www.catb.org/~esr/faqs/smart-questions.html
    Wanikiya and Dyami--Team Zigzag

  • How to restore iTunes library after operating system changed?

    How to restore iTune library after operating system changed on the laptop? The syn is not working because it doesn't recognize the computer.

    Recovering your iTunes library from your iPod or iOS device: Apple Support Communities
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
    Sync Your iOS Device with a New Computer Without Losing Data - How-To Geek

  • HT1414 my i phone 3g seems to of crashed when i tried to reset it. it jus shows an apple i con in middle of screen and it wont turn off but it flicks off itself but returns to same apple icon. anyone know whats up with it or how to restor it please?

    my i phone 3gs seems to of crashed when i tried to restart it. the screen jus displays an apple i con in the middle of the screen and wont turn on or off. anyone know whats wrong with it or how to restore it?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • N8: How to restore music store widget after hard r...

    Hi
    I lost all  nokia N8 widgets including Music store after I hard reset my N8.
    I have really been searching but have been unable to find a work around for this. I am unable to play any OVI music on my phone as it searched for a license and ends up saying that this is not my registered device.
    I really need some help.
    Nokia care has failed to solve my problewm so far.
    HELP!
    MODERATOR'S NOTE:  We have edited your post. Please refrain from posting irrelevant characters. Posting with a brief and concise concern would be enough to gather solution.

    I have been able to restore everything....except the Ovi Music Widget after a hardreset.
    This might help - 
    http://www.nokian8blog.info/2011/06/how-to-restore-ovi-music-unlimited.html

  • TS4036 How do I restore after 5.1 os upgrade

    I upgraded my software and lost al my apps

    fdonnelly wrote:
    How do I restore after I have already setup a new device? ...
    ...to restore from an iCloud backup, erase your device (by going to Settings > General > Reset > Erase All Content and Settings). When prompted to set up as new or to restore from previous backup, select Restore from iCloud Backup. Enter your AppleID and password when prompted.
    See  How to Restore from a Backup   Here...
    http://support.apple.com/kb/ht1766

Maybe you are looking for

  • Doubt on Dates

    Hi exports, I want to create executable program which is having date field in selection screen. date is select-options field. now my problem is i want to select the data from ztable. the table contains many filed in that one field is from_date and an

  • MacBook Pro Retina Early 2013 ME665xx/A same body like MacBook Retina Mid 2012 MC976xx/A ?

    Hello, I have a MacBook Pro Retina Early 2013 ME665xx/A. Does it have the same body like the MacBook Retina of Mid 2012 MC976xx/A so that a case for a MacBook Pro Mid 2012 fits on my Early 2013? Much thanks

  • Can I get 3g ipad service that would work in both UK and France?

    I have a 3G iPad 2.  I just returned from Canada, where I was able to buy a microSIM from a local Bell store, put it into the iPad, and then purchase a month's worth of 3G service.  It worked great, and was MUCH cheaper than using the AT&T internatio

  • Popularity Rating using Bar Graphs on Itunes?   What does it mean?

    When I log onto Itunes, and I look at a particular band, like the band, "Without A Face," I see the "popularity rating," beside each individual song. What does the popularity rating bar graph indicate? Does it represent the number of sales, of each i

  • Firefox error help me

    https://docs.google.com/file/d/0B-djiX1nuEspOGlGdXlfNWxmTzg/edit you can see my piture, it's error. Help me.