How to restore my icloud backup and where can I find the setup assisant in my new ipad
Dear Sir
Can you help my on how to restore my icloud backup and where can I find the setup assisant in my new ipad?
Thanks and Regards,
Clare
iPhone User Guide (For iOS 6.1 Software)
Similar Messages
-
How do I backup my iphone to a computer when every time I plug it into the computer, it starts syncing it to itunes or trying to download itunes? How do I back it up and where do I find the backup?
The backup does not include any itunes content. NO apps, music,etc
You can transfer itunes purchases from iphone to computer: File>Transfer Purchases
You need to copy everything from your backup copy of your old computer to your new computer. -
Is there a way to get a search protocol of the "Find my iPhone" search app and icloud ? And where can i find a protocol of the chat with a apple support worker
Thanks for the reply however this does not help. When I check the cloud it shows that I have only 20 photos. In reality I had a lot more than that. All the photos on the cloud are those that I have taken since I was at the Apple store. When I check cloud storage usage on my phone it says that I have 5.1 GB of photos. This is a lot more than the 20 that I can see. I am not sure what the Apple employee did to my phone.
Still looking for answers. It is really too bad that I can not talk to an Apple person to get help since they messed up my phone. -
I sent e-mail photos from iPhoto using my @me account but I do not find the history of sent e-mails in my new iCloud account. Where can I find the history of sent e-mails?
Using iPhoto as the email client in iPhoto does not creatge a sent copy. iPhoto indicates in the Info drawer if a photo was emailed by iPhoto (under the Sharing section):
There's no easy way to search for photos that have been emailed. Each photo has to be inspected via the Info tray.
One could add a keyword to emailed photos which would let a smart album keep track of those photos.
A better solution, IMO, is to set Mail as the email client (in iPhoto's General preference pane) and use it. That will give you an sent copy, better access to your contacts and, if you want a theme, numerous photo themes under the Stationary section of Mail.
OT -
How to enable telemetry logs and where can i find the command line for sun
Hi i tried creating the telemetry logs directory but the logs are not being populated. i created the following directory:-
/opt/SUNWmsgsr/data/telemetry/imap/usersns1
where usersns1 is the userid.
Also pl. tell me where can i get the command list for sun one messaging server to use the command line utility to list, delete mailboxes. also can i search for all the mailboxes under one domain name. if yes then which command i have to use.
thanks in advance.Hi,
Hi i tried creating the telemetry logs directory but
the logs are not being populated. i created the
following directory:-
/opt/SUNWmsgsr/data/telemetry/imap/usersns1
where usersns1 is the userid.Make sure the permissions (ownership) on the user directory and the sub directory match those that messaging server uses - by default mailsrv:mail. This is the most common cause of the telemetry data not being created. The other thing to verify is that the user's account isn't stored as user@domain, otherwise you may need to create the directory as the entire user@domain (try both just to be sure).
Also pl. tell me where can i get the command list
for sun one messaging server to use the command line
utility to list, delete mailboxes. also can i search
for all the mailboxes under one domain name. if yes
then which command i have to use.The Messaging Server reference guide is a good place to start (lists all the command-line utilities/flags and what-not):
http://docs.sun.com/app/docs/doc/819-4429?l=en
The mboxutil command is used to list/create/delete mailboxes and you can use a pattern to only list those mailboxes in a specific domain.
Regards,
Shane.
thanks in advance. -
How do I format links? And where can I find easy help info?
How do I override the blue color added when I add a hyperlink? (I found the modify page properties/links drop-down to remove the underline, but I can't figure out how to default to the original text color and only show link during rollover, or add my own formatting (e.g. strong) to show the link.
Also - can anyone tell me where to find the most comprehensive help section for Dreamweaver CS5, where I can find answers to questions like this link question? I've tried search, reference, help features within Dreamweaver, tutorials/faqs/forums on the adobe.com site (and I've been using Lynda.com tutorials which are great). But I can't find basic answers to items like reformatting links. Help!!! ThanksHow to style your links is not so much a Dreamweaver issue, I guess it is probably your knowledge of CSS that is running short here.
There is plenty of info on the web, just google for "styling links CSS" and you'll find lots of how-to's
Your best option to find help might be to buy a good book. I learned a lot from Dreamweaver CS5: The Missing Manual, First Edition by David Sawyer McFarland
I found CSS: The Missing Manual, 2nd Edition by the same author maybe even more useful, since it focuses solely on CSS instead of on the Dreamweaver program details. So check that out too, or buy them both, like I did. Both are excellent books, which will surely answer your questions and learn you how to do things right from the start. -
How to install my onboard Networkcard and where do i find the drivers?
I have updated my computer with some hardware and i now need to install the sound and network drivers again. I think i found the sound drivers but i cant find the network driver. Anyone got a link for me? And how do you install these drivers? Just run the installfile and everything goes automatic or is it more complicated?
Btw: I have Windows XP on a 40gb harddisk and a maxtor 300gb harddisk on secondary master. But in windows xp it only show 127gb (i think i was). Why?
Thanks for all the help.
BTW: If anyone got any other nice pages to get my mainboard up to speed, bring it:)Quote from: needahand on 06-October-05, 22:39:40
But in windows xp it only show 127gb (i think i was).
Windows needs SP1 or greater to recognize drives larger than 137GB. Install SP1 or SP2 and partition the remaining space via disk management.
And we can't give you any info on the network card without knowing what motherboard it is.
Good Luck
Jeremy -
What ist the "architecture" of a laptop and where can I find the right one
I have an older Satellite laptop (1800-750) and I am trying to install Linux on it. The problem is that their are different downloads depending from the "architecture" of my computer . Sparc, PowerPc, Intel what ever...
Can somebody explain me what it is and how I can find out which "architecture" my laptop has???
Link:[http://www.debian.org/releases/stable/installmanual]
Thanks in advance,
AmarabaySome architectures are not known to me like Alpha, SPARC,
But for your Satellite 1800-750 you need the Intel x86 version. This version is for all PCs with 32bit CPU.
The AMD64 is for notebook and PCs with AMD64 CPU and as far as I know the Intel IA-64 for new Intel CPUs with 64bit support.
All other version are not known to me but the Intel x86 version should work on your laptop. -
Where can i replace the broken screen on my new ipad?
I was recent vcitim to a strong armed robbery. A thief tried to snatch the ipad away from me. His attempt fail. However, my ipad was dropped and the screen now has afew cracks on it. I would like to know if apple have a service to replace a new screen on my ipad or i would have to go to a third party.
You can bring in your iPad to an Apple Store or AASP, and have it evaluated for the cost of repair. Virtually all of the iPad parts are available online. Too, there are third-party repair services that are online. If you decide to DIY, there are several teardown videos online.
-
I have rented a movie but I do not see it in my account.
Okay.
Perhaps see the second paragraph of King_Penguin's post here:
HT1657 Re: How do i get the video app to watch the vidoe i've rented?
Could there be a similar age restriction thing going on for you? -
I REALLY NEED A DESCENT BROWSER FOR MY OLDER IMAC WITH LIMITED HARDRIVE SPACE. CAN ANYBODY HELP ME AS MY NETSCAPE BROWSER(1.7.13) IS STARTING TO MESS UP A BIT. THANX!!
Firefox 1.0.8 was the last version of Firefox for Mac OSX 10.1 versions. It is not supported by Mozilla since April 2006.
ftp://ftp.mozilla.org/pub/mozilla.org/firefox/releases/1.0.8/mac/en-US/
You should also look at Classilla. <br />
http://www.floodgap.com/software/classilla/ <br />
Looks like is still being maintained. <br />
http://code.google.com/p/classilla/wiki/Roadmap -
Where can I find the file where the static mapping allocations of the DHCP server are stored?
In our company we are using DHCP to assign static ip addresses to our clients.
Now we are forced to change the ip address range. To prevent changing each allocation
of mac-address to ip-address manually with the admin tool i would like to change the allocation
in the file where the allocations are saved. The reason ist that i just have to use copy & paste for all
the allocations.
So how is the file named and where can I find the file where
the static mapping allocations of the DHCP server are stored? Is it just an ASCII file?
Must i note anything when i change the file manually?From man bootpd:
BOOTP/DHCP STATIC BINDINGS
Static IP address to ethernet address bindings are stored in the /etc/bootptab file and in Open Directory. Bindings specified in the /etc/bootptab file take precedence over those in Open Directory.
See bootptab(5) for more information about the /etc/bootptab file.
For Open Directory, bootpd looks at the /Computers records for the following properties:
/etc/bootptab is a standard text file, while the records in Open Directory can be manipulated either through the command line, or via Workgroup Manager. -
HT1766 Where do I find the Setup Assistant so I can restore a backup on icloud?
I have a backup from yesterday that i want to restore, however, I can't find the Setup Assistant in Settings? Help please.
Your post sounds very familiar to me,
The setup assistant appears on the iPad screen after you erase it in Settings>General>Reset>Erase all content and settings, after you have wiped the iPad, then the setup assistant guides you through the iPad setup.
But you must erase the device first.
These should be helpful.
http://www.imore.com/2012/03/15/setup-ipad/
http://www.cultofmac.com/153433/how-to-get-started-with-your-new-ipad-the-right- way-setup-guide/
http://gigaom.com/apple/ios-101-set-up-and-restore-from-icloud-backup/
I think that I did refer you to one of these .... -
I have problem with Itunes losing where podcasts and some purchased music is located. Don't know how Itunes losing the locations of the files and I can't find the files on my hard drive. What can I do to stop Itunes losing location and restore my files?
Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.
-
I am still on Snow Leopard 10.6.8 and do not have iCloud in my System Preferences. I have registered with iCloud online and backed up my iphone5 last night to my iMac. Where can I find the backup on my iMac?
Below is what comes up when I sign into iCloud - where are all the other applications that I need to backup?
Appreciate any answers to this query?
RachelYour question is unclear. If you're backing up to your iMac, (via iTunes, with cable or WiFi), this has nothing to do with iCloud and the backup is stored on your iMac here:
: ~/Library/Application Support/MobileSync/Backup/
Maybe you are looking for
-
I'm trying to install Guide Guide for Photoshop CS 2014 using the Adobe Extension Manager CC but when clicking on the 3.1.2-guideguide.zxp I recieve the following error, "This extension cannot be installed, since it conflicts with a existing one. To
-
System is not starting (MS-7058)
Hi All, I need some help from you. I am using P4 3GHz LGA775 socket CPU with MSI motherboard MS-7058(915-G Combo) since last 2 years. Last Week all of sudden, the CPU fan speed increased after 20 minutes of operation(which was not heavy resour
-
What would cause this document to suddenly not convert to PDF?
-
Video bit rate after conversion
Hello everyone, Im wondering, if i have a file of x format, with 50Mb video bitrate, and I convert it using compresor 4 to ProRess 422, the result will give me a video with .mov extentin with video bitrate around 120 Mb, if I convert it to Proress (L
-
Obsolete X509Anchors warning.
Since installing Leopard, I have been getting frequent console messages on my MacBook Pro that various programs are "Accessing obsolete X509Anchors." I originally performed an upgrade install but have since performed a clean install with migration an