How to restrict material master by material type  t-code MM01

Hi,
how to restrict Materilal master by Material type in t-code MM01
I do restrict by M_MATE_MAR authorization object . After i see there not restrict.
Amit

>
sapvinithbasis wrote:
> hi
> plz help me out in solving this issue
> regards vinith
Vinith,
I have explained in great detail exactly what you need to do at every stage.  The steps I have outlined are the same that I follow every time that I want to apply material type restrictions. 
I strongly recommend that you contact your security admin to help with this, alternatively engage the services of a trained/experienced security admin who can come on site and go through this with you. 
If you have done the following then it will work:
1. Assign auth group to material type via OMS2
2. Verified that check for M_MATE_MAR is active
3. Ensured that M_MATE_MAR does not contain the auth group/s which you assigned via OMS2 (that includes *)
This is the last comment I will make on this topic.
Cheers
Alex

Similar Messages

  • Mandatory in material master with material type wise

    Dear all
    Is it possible to make a field mandatory in material master with material type wise?
    kindly help

    Hi
    See the below config
    Check in OMS2 for your material type for "field reference". then
    Spro>logistics general>Material master-->field selection.
    Here you need to group required fields under one field selection group. then in Maintain field slection for data screen, you can make Field group madatory for the field reference (material type)
    If required take help from MM consultant
    Regards
    Antony

  • Invoice (MIRO or FB60) with reference Material Master or Material Group

    Hi Gurus,
    I want to post invoice with reference to material master or material group.
    There is never purchase order, but i want to manages expenses on material categories,
    eventually have automatically the GL account after fullfilling material or material group.
    Thanks for your help,
    Denis

    Thanks,
    But when i post a material, i've an error message about the GL account. Have you used this process entirely ?
    Denis

  • Difference between Material Master and Material ledger

    Can anyone tell me the difference if any between Material Master and Material ledger and its usage and interlink with SAP modules.
    Thanks for your time
    suresh arya

    Hi Suresh,
    The application component Actual Costing/Material Ledger fulfills two basic objectives: The ability to carry material prices in multiple currencies/valuations, and actual costing.
    The material master records are all information your company needs to manage a material is stored in a data record in the material aster, sorted by various different criteria.
    For more information regarding the functionality, you can see in path below, help SAP...
    Material Master data:
    http://help.sap.com/saphelp_47x200/helpdata/en/03/abb8f85fbe11d396a600a0c930e0da/frameset.htm....
    Material ledger:
    http://help.sap.com/saphelp_47x200/helpdata/en/a2/5cd63835e211d38a710000e83234f3/frameset.htm..
    Regards,
    Paulo

  • Change documents of material master classification class type 001 and 300

    Dear guru ,
    I want to see the history of change documents of material master classification using MM02.
    The system allow to see the history only for class type 023.
    For class type 001 or 300 the change document isnu2019t available.
    I must do some settings or the function for these class type arenu2019t available ?
    Thanks.

    Dear ,
    changes in values for a characteristic can be monitored in CL20N but as for MM02/MM03 transaction only for class type 023.
    For class type 001 or 300 the change document isnu2019t available.
    Thanks.

  • How to restrict the Master data in HR reports .???

    Dear SAP-ABAP Experts .
    I am facing a problem regarding HR reports which is appearing from HR Master Data .
    we want to restrict that a employee whose payroll area is AB (say) can only able to access the out of reoprt for payroll area AB only He/She not allowed to access the data for anyother payroll area .
    What help is required from Basis side , regarding Role / Profile etc .?
    How do we restrict this thing .
    PLease help me out .
    Kind regards : rajneesh

    Hi ,
    i think u are using LDB's in ur Reports , so LDB will take care of Authorizations.
    Regards
    prabhu

  • How to restrict the Master data access for HR reports .???

    Dear SAP-HR Experts .
    I am facing a problem regarding HR reports which is appearing from HR Master Data .
    we want to restrict that a employee whose payroll area is AB (say) can only able to access the out of reoprt for payroll area AB only He/She not allowed to access the data for anyother payroll area .
    What help is required from Basis side , regarding Role / Profile etc .?
    How do we restrict this thing .
    PLease help me out .
    Kind regards : rajneesh
    Edited by: rajneesh mittal on Jul 31, 2008 1:14 PM

    Hi rajneesh,
    In the IT0001 there is a field called organizational key.
    If you're not using it for any other purpose, make it filled with "payroll area" value through customization.
    Then through PFCG -> Change authorizations, you can limit the access authorizations of roles based on payroll area (using P_ORGIN Authorization object).
    If you have further questions pls feel free to ask.
    Regards,
    Dilek

  • How to restrict uploading files by mime type?

    Hi,
    I have been searching the forum (and Google) looking for tips on how to ensure users can only upload files of specific formats (Word, PDF, etc) for specific document types as defined within the application (e.g. Curriculum Vitae (Word), Copy of Transcripts (PDF)).
    While I have used this research to start work on a server-side solution, I would like to know if there is an apex-friendly way to "validate" a file-browse item based on mime-type.
    Has anyone else had to address this?
    Ted

    Hi,
    I would like to know if there is an apex-friendly way to "validate" a file-browse item based on mime-typeHow about, you create a check constraint on your MIMETYPE column. something similar to this:
    alter table "MY_TABLE" add constraint
    "MY_TABLE_CON" check ( "MIMETYPE" = 'application/pdf' or "MIMETYPE" = ......)Or you can use this plugin, provided using browsers supporting HTML 5:
    http://www.theapexfreelancer.com/apex/f?p=APEXFREELANCER:FILE_UPLOAD:0
    For friendly,
    Please check error handling :
    http://www.inside-oracle-apex.com/apex-4-1-error-handling-improvements-part-1/
    Best Regards,
    Fateh

  • Material master ( check after every view of MM01)

    Hi friends ..
    i have to maintain the sequence of view in MM01 according to the data filled in last view . Is there any exit which triggered after every view..
    Any type of idea Welcome.
    Regards.
    Message was edited by:
            Madan Gopal Sharma

    Industry
    i tried it.. but it is triggering at time of saving only ..i want triggering point after each view
    Message was edited by:
            Madan Gopal Sharma

  • How to restrict a user from using the transaction code SU01?

    How can I grant a profile to a user with the profile SAP_ALL except running the transaction code SU01?
    I know how to lock the transaction code using SM01 but is there any other way to do it.

    Go to S_TCODE
    Double click on it and give the combinations like        A*  -   X*
                                                                                 SU00
                                                                                 SU02 - Z*
                         Try this one definately it will work.

  • How to Restrict Material Type in MM01 ?

    *Hi experts,*
    *How to restrict material type ? i wanted to restrict the end-user not to access any other material types than Raw material,Semi-finished goods. it means when end user trying to create material then if he enters other than these two material types then he should get error saying that "your not authorized to select that xyz material type".*
    *I have tried to restrict the object M_MATE_MAR(Material Master : Material type) but am unable to do so. is there any other object which take care of Material types ? did i selected correct object or not??*
    *can anyone help out.*

    Hi,
    You have to make few configuration settings before you actually restrict at the object level. The solution is clearly discussed in the below thread:
    how to restrict material master by material type  t-code MM01
    Hope this helps!!
    Regards,
    Raghu

  • How to restrict Material Class in Sales Contract Doc

    Hi,
    I need to restrict Material Class in Sales order based on Item catagory, Material group4 and Sales contract Document type.
    If the above 3 fields having a particular value then the system should restrict all the other classes of that material and display only a particular class and it's related characteristics.
    If any one come across such a senario then pklease let me know.
    Regards
    Ajay

    Hi,
    You have to make few configuration settings before you actually restrict at the object level. The solution is clearly discussed in the below thread:
    how to restrict material master by material type  t-code MM01
    Hope this helps!!
    Regards,
    Raghu

  • Authorisation to create material master based on material type

    Hello MM Gurus,
            How to create user authorisation to create material master on the basis
    of material type i.e. some are authorised to create material master with
    material type ROH only and some are authorised to create material master with
    material type HALB.
    Regards
    Yoga

    Hi,
    Please proceed as follows.
    - Insert the Authorisation Object M_MATE_MAR in your master role.
    - Maintain multiple derived roles with specific values of material type against the inserted authorisation object.
    Hope this clarifies your doubt.
    Please award points if you find this info useful.
    Regards,
    Priyadarshi.

  • Material master/Output type IDOC /MATMAS

    Hello ,
    I want to generate Idoc(MATMAS) whenever a material is created or changed. I could do the same for ME21N/ME22N for PO with PO idoc. Would like to know whether there is output types for material master or anything else so that i can generate Idoc for my senario.
    Thanks for ur time.
    Jeeva.

    Hi,
    the configurations which we do for material master is below...we don't give any output for material master,becoz its a master data not transactional data..
            For distributing master data like material master, vendor master, customer master we have standard transaction codes that are provided by sap.
    Bd10(send material master)
    Bd12(send customer master)
    Bd14(send vendor master)
    Bd30(bom’s)
    The order of Tcodes are:
               Bd54 (creating logical systems)
               Scc4 (assigning logical systems )
               Sm59 (rfc destination)
               We81 ( message type)                      
               We30 ( idoc type)
               We31 ( segment type)
               We82 (linking message type and idoc type)
               We21 (creating port)
               We20 (partner profiles)
               Bd64 (Distribution model)
               Bd10 (material master)
    Ex: material master.
         Message type: matmas.
         Idoc type: matmas05.
    Rewrad if helpful.
    Regards,
    Nagaraj

  • Material Master Field Change

    Hi Experts
    I have a Field in MRP2 View MARC -> Field LGPRO (Issue Storage Location).
    I am using MRP2 view, only for this field.
    1) Is it possible I can move this Field to Plant/Storage location view ??
    2) How to restrict this setting only for particular material types.
    Regard

    You need to move the entire sub screen. If you go to SPRO->logistics General> material master>configuring material master--> define structure of data screens for each screen sequence. Say select 21 that is std ind ( short) tab pages and make a copy of that say Z1. In that if you go to MRP2 view the sub screen containing storagelocation field is with screen number 2484.
    Now if you go to Plant storage data view 1 and select dialog structure subscreens; here the screen with 0001 can be changed to 2484. However since this is related to MRP view the maintainance status needs to be changed to D from L else you will not be able to see the fields. But if you change the status to D the orginal sub screens of Plant data/storage1 will not appear.
    You will have to check  that these subscreens can be moved to Gen plant data/storage2.
    Finally you need to assing this Z1 under same node but assign screen sequences to user/material type/transaction/industry sector under that
    SREf Trans      Sref user    Sref Matl type                      Sref : industry     Ssq
    01                      *                relevant material type          *                        z1 ( the one which was created as above)
    However  material master being very critical it is advised not to make such changes and if any changes are made it has to be thoroughly tested for the impact.
    Regards
    Sangeeta

Maybe you are looking for

  • How to restrict the material for speific storage type

    Dear all, i am maintained  the X - material to 001 warehouse and 001 rack storage type when i try to create TO for putaway process it will allow me some  other storage type like open,shelf....as per my client requirement it should not be ..... i am u

  • Rosetta Stone not working?

    Hello I just downloaded Rosetta Stone and installed it. However, whenever I open it up it asks me to update it and I do. It then says it will restart itself but it only shuts down and does not reopen. If I click it to reopen it manually it just asks

  • Design decision: good to use delete cascade in database?

    Hello, Suppose there are two tables: customer and address. These two tables are linked as one (customer) to many (address), and delete cascade. Every time when the application deletes a customer record, the linked address(es) will be deleted as well.

  • BoM for 5508 HA WLAN Solution

    Greetings, i'm looking to deploy two Cisco 5508 WLC's in a HA pair and license them to support 150 2600e AP's. Would the BoM below be sufficient? As i understand the HA controller doesnt need licensing as in the event of the primary controller failin

  • Where can I find the Product Code for Windows Office Home Edition after a recovery? Without disk.

    I had to conduct a Factory Recovery on my notebook.  Everything loaded correctly.  When I opened Windows Office Home Edition it asked for a product code.  I don't know where that is located, it came already installed on the computer.  I looked throug