How to restrict number of row/lines in a table in RTF

Hi,
Im working on PO report. It has header information in the header part of RTF. But coming to the lines , I put that under a different group in the table in the body part of the RTF. I did a FOR loop for printing PO Lines because it does have multiple line information. But now i have to restrict the number of rows in that table per page irrespective of number of PO Lines. After printing 20 rows in the table, it should go to the next page. Im going through the other threads for the solution.
Thanks,
venkat

There are so many thread regarding this ,
pls go thru them patiently...
logic is something like....
use if condition and position() and say page-break..
use for-each@section instead of for-each..so that the headed info is maintained with regards to PO lines
happy searching...
if you cant get still, last option send me mail with details

Similar Messages

  • How to restrict number of rows display using ig:gridView

    Hi
    All
    How to restrict number of rows display using <ig:gridView datasource="{mybean.mylist}">
    i am getting 10 rows using data_row . i wanna show only first 5 rows .
    pageSize ="5" will be ok . but it displays remaining rows in next page. but i want to display only first 5 rows . is there any attribute to restrict number of rows.
    thanks
    rambhapuri

    I have no idea which component you're talking about. If want to discuss here about a non-Sun JSF component, then please mention about the name, version and build in detail. You can also consider posting this question at the website/forum/mailinglist of the component manfacturer rather than here. At least I can tell you that the Sun JSF h:dataTable has the 'rows' attribute for that. I can also suggest you to just take a look in the TLD documentation of the component in question. There should be all possible attributes listed with a detailed explanation about the behaviour.

  • How To Restrict Number Of Rows For Multiple Group In Report Output

    Hi ,
    I have a requirement to restrict number of rows in report output.I have three different group , if i use same no of rows to restrict then output is as expected but if i want Deduction group should have 7 rows , earning should have 5 rows and Tax group have 3 rows in report output then XML tag is not working.
    Below is the XML tag i am using -
    First i have declare the variable to restrict the rows -
    <xsl:variable name="lpp" select="number(7)"/>
    <xsl:variable name="lpp1" select="number(5)"/>
    <xsl:variable name="lpp2" select="number(3)"/>
    For Each -
    <?for-each:PAYSLIP?>
    <xsl:variable xdofo:ctx="incontext" name="DedLines" select=".//AC_DEDUCTIONS"/>
    <xsl:variable xdofo:ctx="incontext" name="EarLines" select=".//AC_EARNINGS[ELEMENT_CLASSIFICATION!='Taxable Benefits']"/>
    <xsl:variable xdofo:ctx="incontext" name="EarTaxLines" select=".//AC_EARNINGS[ELEMENT_CLASSIFICATION='Taxable Benefits']>
    <?for-each:$DedLines?><?if:(position()-1) mod $lpp=0?> <xsl:variable name="start" xdofo:ctx="incontext" select="position()"/>
    <?if:(position()-1) mod $lpp1=0?><xsl:variable name="start1" xdofo:ctx="incontext" select="position()"/
    <?if:(position()-1) mod $lpp2=0?><xsl:variable name="start2" xdofo:ctx="incontext" select="position()"/>
    Report output is tabular form (one page has two column - Earning and Deduction ) . Tax group comes below earning group.
    Deduction Group -
    <?for-each-group:$DedLines;./REPORTING_NAME?><?if:position()>=$start and position()<$start+$lpp?>
    <?REPORTING_NAME?>
    <?end if?><?end for-each-group?>
    Earning Group -
    <?for-each-group:$EarLines;./REPORTING_NAME?><?if:position()>=$start1 and position()<$start1+$lpp1?>
    <?REPORTING_NAME?>
    <?end if?><?end for-each-group?>
    Tax Group -
    <?for-each-group:$EarTaxLines;./REPORTING_NAME?><?if:position()>=$start2 and position()<$start2+$lpp2?>
    <?REPORTING_NAME?>
    <?end if?><?end for-each-group?>
    Please let me know in case additional detail is require.
    Thanks in Advance.
    Thanks,
    Harsh
    Edited by: Harsh.rkg on Jan 14, 2013 9:43 PM

    variable lpp2 is declare to restrict EarTaxLines -
    <xsl:variable name="lpp2" select="number(2)"/>
    This will help to restrict the no of rows on one page , if we have more then two tax benefits line then layout will roll over to continuation page.
    As part of report output my expectation is if i restrict Earning , Deduction and Tax benefits to same no of line for example - variable lpp ,lpp1 and lpp2 have same value "number(2)" , we can see the layout is continue on next page (restrict every group can have max two lines) .This is the reason we have 4 header grid , deduction and Tax Benefit lines are rolled over to continuation page .But if we restrict different value for each variable then continuation page layout is missing .
    When we tried for <xsl:variable name="lpp2" select="number(3)"/> value continuation page layout is not getting generate for both employee number .

  • How to restrict number of rows returned in a query

    Hi frnds,
    I'd like to restrict number of rows returned by my query to some 10 rows. how to do that.When I try doing with the rownum<10 its giving results for a particular dept and that too some 6 rows only...btw I'm grouping my table and includes joins from many a table and am ordering the table results by a column.. How to do this..

    776317 wrote:
    Hi frnds,
    I'd like to restrict number of rows returned by my query to some 10 rows. how to do that.When I try doing with the rownum<10 its giving results for a particular dept and that too some 6 rows only...btw I'm grouping my table and includes joins from many a table and am ordering the table results by a column.. How to do this..
    TELL ME HOW MANY ROWS YOU HAVE IN TABLE?
    Because you have only *6 rows* in you column, if you less than 10 rows then it displays only containied/exist rows. nothing much
    select ename,empno from emp where rownum < 10;Thanks

  • How to restrict number of rows returned in BIP

    Hi Friends..
    How to restrict no of rows displayed by the report to some 10 rows for example.. in BIP

    If its in RTF you can use position to restrict.
    <?for-each:ROW[position()<11]?>
    You can also restrict it in your sql query using ROWNUM.

  • How To Restrict Number of Rows in BI Report

    Hi Experts
    I am on the way to generate a report which will be used to print the Levels.
    For this report i have the strict requirements of having size of each level. For example, In my query i have 3o rows which need to be printed as levels. As per the size i want to restrict the report to print 5 row in each page. so that in 6th row it will be moved to next page and so on.
    Can you please let me know how can i handle this in RTF. As restricting the same through SQL is not possible.
    Awaiting for your response.
    Srikant

    Hi ,
    Please check the following link that may helpful for u
    http://bipublisher.blogspot.com/2009/06/bi-publisher-conditionally-limiting.html
    Thanks,
    Ananth

  • PRINTER_FRIENDLY View and how to restrict number of rows

    Dear apex community,
    I am on the APEX 4.2 and OracleXE11g.
    I have created a page with the classic SQL report based on the table. The pagination style is "Row Ranges 1-15 16-30 (with set pagination)". Enable Partial Page Refresh: Yes.
    The table contains more than 1000 rows and the user can see on one report page only 30 and can navigate with pagination links.
    I have created for the user the PRINTER_FRIENDLY view of this page with "YES on the ninth place of the apex url. But now I have the following problem:
    - user navigates with pagination buttons and is actually on the page "31-60". The report shows him only 30 records.
    - user clicks on the link "PRINT" to call the printer friendly view of the page but the printer friendly page shows him not 30 records, but ALL (more than 1000) rows from the table.
    Is there any way to show on the printer friendly page only the records from the report?
    Best regards.

    S-Max wrote:
    @fac586,
    "+CSS print media style sheet on the standard page+". What is it???A print media style sheet is used to suppress unwanted page elements (tabs etc) from the printed output and optimize the formatting for print (e.g. smaller font sizes, including full URLs instead of links, page breaks etc).
    Simple example of suppressing unwanted APEX page elements using media style sheet: +{message:id=2475831}+

  • How to restrict number of Rows in page?

    Hi Experts,
    I have scenario when i convert the Report in to PDF i have to display 10 Rows per page. \
    Any ideas !!!
    Thanks
    -B-

    Hi,
    I have tried this method at my end and its working perfectly fine.
    1. I created a variable at report level as:
    v Test = Floor(RowIndex()/10)
    2. Added this variable in the Block as a new column.
    3. Select the v Test column, Right Click and set as section.
    4. Go to structure mode select section and go to properties tab and select the property "Start on new page" under Relative Position.
    After following these steps, if you are not able to get the result then can you provide details of the failure or what results did you get and so on.
    Regards,
    Rohit

  • Restricting number of rows in a Pivot report

    Hi All,
    How to restrict number of rows per page in a Pivot layout.
    My report has 1000 rows and all are shown at once instead of having a next page button after every 25-50 rows as it is the case in tabular report.
    Pls Help!
    Thanks,
    Adi

    Thank you all for the help!
    --Adi                                                                                                                                                                                                                           

  • How to restrict number of received e-mails

    how to restrict number of received e-mails at iOS 7 ( at previous iOS there were options to receive last 50 or 100 or 200 messages ) ??

    I have no idea which component you're talking about. If want to discuss here about a non-Sun JSF component, then please mention about the name, version and build in detail. You can also consider posting this question at the website/forum/mailinglist of the component manfacturer rather than here. At least I can tell you that the Sun JSF h:dataTable has the 'rows' attribute for that. I can also suggest you to just take a look in the TLD documentation of the component in question. There should be all possible attributes listed with a detailed explanation about the behaviour.

  • Please let me know how to Count Number of completed line items in past 6 mo

    How to Count Number of completed line items in past 6 months / 12 months ?
    Hi,
    I am trying to count "Number of Completed Line Items in Purchase Order Document" for my Key Figure ZPO_CNT.
    Purchase Order document = ZEBELN
    Line Item = ZEBELP.
    I need to find and count if the Line Item has been received in the past 6 months from today and similarly in the past 12 months.
    I have "Delivery Completed" field, ELIKZ.
    So, based on this would I be able to calculate it in Query Designer?
    If so, Please let me know how
    Krishna

    Hi Experts,
    I dont have a defined Restricted key figure yet.
    I have populated 0COMPL_DEL(Delivery Completed Indicator)  and 0EBELN (Purchasing Document Number) and 0EBELP (Line Item Number in Purchasing Document) .
    This is what I think how I need to calculate:
    Number of completed line items in past 6 months:
    If  Delilvery Completed Indicator (0COMPL_DEL) = x, calculate No. of Line Items (ZPO_CNT) from 0CALDAY to 6 months
    and
    Number of completed line items in past 12 months:
    If  Delilvery Completed Indicator (0COMPL_DEL) = x, calculate No. of Line Items (ZPO_CNT) from 0CALDAY to 12 months
    Please let me know if the logic is correct. If so, how I can create this in report

  • How to increase number of rows display in ESS

    Hi All,
    how to increase number of rows display in ESS applications especially in Time approval inbox from standard display of 5 rows to say like 20 rows? is there a quick way to do it?
    Thanks all
    Murty

    Kalpesh,
    it is actually in web dynpro view, I have seen this setting and it doesnt give option for increasing default number of rows in web dynpro application. Table is dynamically constructed in web dynpro implementation and I have the hard time finding out., Any help is appreciated in these lines,
    Thanks
    Murty

  • How to get number of rows return in SELECT query

    i'm very new in java, i have a question:
    - How to get number of rows return in SELECT query?
    (i use SQL Server 2000 Driver for JDBC and everything are done, i only want to know problems above)
    Thanks.

    make the result set scroll insensitve, do rs.last(), get the row num, and call rs.beforeFirst(), then you can process the result set like you currently do.
             String sql = "select * from testing";
             PreparedStatement ps =
              con.prepareStatement(sql,ResultSet.TYPE_SCROLL_INSENSITIVE,ResultSet.CONCUR_READ_ONLY);
             ResultSet rs = ps.executeQuery();
             rs.last();
             System.out.println("Row count = " + rs.getRow());
             rs.beforeFirst();~Tim
    NOTE: Ugly, but does the trick.

  • How to calculate number of rows for perticular characterstic in SAP BI Bex

    Hi experts,
    Please let me know how to calculate  ' number of rows  ' for perticular characterstic in Bex query. 
    Thanks & Regards,
    Babu..

    Hello,
    You can try this
    Create a CKF and assign the vale 1 to it. Open the query and select Character where you want to display ' number of rows ', go to properties windows, select 'display', in the results row drop down box, select  'always display'.
    Thanks.
    With regards,
    Anand Kumar

  • How to Count Number of completed line items in past 6 months / 12 months ?

    How to Count Number of completed line items in past 6 months / 12 months ?
    Hi,
    I am trying to count "Number of Completed Line Items in Purchase Order Document" for my Key Figure ZPO_CNT.
    Purchase Order document = ZEBELN
    Line Item = ZEBELP.
    I need to find and count if the Line Item has been received in the past 6 months from today and similarly in the past 12 months.
    I have "Delivery Completed" field, ELIKZ.
    So, based on this would I be able to calculate it in Query Designer?
    If so, Please let me know how

    Hello Deva
    If youe want to calculate the completed line item for last 6 or 12 month then i think u will be displaying the query data for these montrhs...create a customer exit to give you date range and restric it in filter area....
    Now Choose any of the below option
    1. I would suggest to implement an additional key figure "counter" in cube and fill values with one for which delivery is completed.
    Now use calculated key figure in Query Designer based on logic
    IF counter = 1 THEN counter ELSE 0
    OR
    2. create a formula variable based on ELIKZ and use replacement path variable, it will display you no. of docs for which delivery is completed....
    Award points if it solves your problem
    Revert back in case of further assistance...
    Thanks
    Tripple k

Maybe you are looking for