How to restrict some values in the final report output.

Hi Experts,
I have scenario where I dont want to include the values in the output of report.
If you observe above there are some un assigned cost elements and its the report output. I dont want these to be in the report.
Please suggest me.
Thanks,
Ravi

Hi Friends,
Thank you for the reply.
I tried to exclude the values, but i dont find any chance to exclude them
If i try the same from characteristic restriction, its allowing me to exclude.
Is there any other possibility to restrict these? Please suggest

Similar Messages

How to select multiple values from the Parameters in the concurrent program

How to select multiple values from the Parameters defined in the concurrent program...and i believe multiple selection is not a direct feature of EBS, but is there any workaround solution to acheive mulitple selection?

I think there's no way to do that using standard feature.
Some workaround I use :
1. If the number of selections are fixed, you could use multiple parameters for the same valueset. For example :
Selection1 : <choose first selection>
Selection2: <choose 2nd selection>
..etc.
If you don't use it then leave it empty.
2. Use text varchar valueset and enter it manually and separate by comma (or other value) , eg : selection1,selection2,selection3....etc.

How to display(binding) values in the table from more than one node?

Hi,
I have two nodes (TRIPS & AMOUNTS)in the context. How to bind these values into the table control?
When i bind second one, first one is getting replaced.

Hi Mog,
Of course it is possible to create a table from attributes of more than one node, and in some cases this is still necessary, but you have to do this the hard (manual) way.
If you have a table control, have a look at the properties and the elements belonging to it.
First of all, there is the property "dataSource", which binds to a multiple node (let's name it TableRootNode). This means that for each element of THIS node, one row is created. In each row the data of exactly one element of this TableRootNode is displayed.
Then you have columns in this table. Inside of the columns there is a header and an editor. The editor is the interesting part.
Normally the primary property of this editor is bound to an attribute of the TableRootNode. Then everything works as expected. If it binds to an attribute of a subnode (SUB) of TableRootNode, then in row i the data of the subnode of the i-th element of TableRootNode is displayed. There is no need for SUB to be a multiple node, but it must not be a singleton.
If you bind a property of the editor to an attribute, which does not lie in the subtree of TableRootNode, then you will see the same value in each row.
Now it depends on the structure of your context. Take the node, which is relevant for the change in each row (I assume it is TRIPS) and bind the table to the node as you are used to. Then for each additional column, you have to create a new column in the tree, create a new header element with a title and a new editor (e.g. textview or inputfield) and then bind the right property of the editor to the corresponding attribute in node AMOUNTS).
If these 2 nodes do not have parent-child-relationship, the tip to create a new node, which consists of the attributes of both nodes is the only solution.
Ciao, Regina

How to restrict Option values for a particular metadata in profile checkin

How to restrict Option values (drop down) for a particular metadata in profile checkin-
Metadata field Color is having options dropdown values (stored in table/views)-
Display name - Blue, Value=1
Display name - Red, Value=2
Display name - Yellow, Value=3
Display name - Green, Value=4
Display name - Black, Value=5
For a particular profile checkin form, for the metadata field Color I want the dropdown value consist of only top three options
Display name - Blue, Value=1
Display name - Red, Value=2
Display name - Yellow, Value=3
But this should be done on profile level only, should not impact the standrad checkin form and other profile checkin forms.
Please help me if any one having any suggestion to implement the above secnario
Thanks,
Sumit

Hi,
Into the rule containing the Color metadata, you can restrict the values of the list.
In "Has restricted list and pane", list the values 1, 2 and 3 (new line for each value) :
1
2
3
Romain.

How to show colmn value in the legend in ssrs Chart?

How to display Legend values in my ssrs Report like below
I want the values like below.
SuccesCount-2000
FailCount-100
No status-150
Can U pls help me for this
ThanX!

I will found the soluction for this ,
Go to Chart Area ->Series Properties->Left Side you have noticed Legend->There you need to add expression in the
fx
i.e ="SuccessCount" & " "& Fields!SuccessCount.value
so you finally get the out put like below
o/p :SuccessCount 2000

(Administration - Marketing - Import), you can set a parameter value "Import mode" for what to do in case of duplication as "update existing records", "Import new records". The final report of this import is presented as a text file that can be viewed in

Administration - Marketing -> Import, you can set a parameter value "Import mode" for what to do in case of duplication as "update existing records", "Import new records". The final report of this import is presented as a text file that can be viewed in Business Administration - Marketing -> Import -> Exceptions. Whatever the exception, including duplication import occurs during import and recorded in a text file. What are the fields that determine the duplicity? How I can I can change those?

You will be returned anything that is in the option's value parameter. What is displayed in the dropdown and what is put in the value attribute do NOT need to be the same, so maybe you should start there.

How to add field value to the standard table

Hi,
How to add field value to the standard table?
for example:
when we go to TCODE SE16-> VBAK table -> on the selection screen if we press F4 against VBTYP we get all the available values for that field. How to add a new document Category value to this field so that it shows up in F4 help for that field.

Hi Asif,
I don't think it is possible and feasible for adding new field value to the field VBTYP because it is not possible through SPRO.
If u see the domain of this field VBTYP we have fixed values provided by SAP. There is no value table for this. If u have value table then it will be updated through SPRO. But still if u really want to add some value u can do that by getting access key and add the value in the fixed values of the domain. But of no use other than simply displaying in F4. Because for what ever value u created here there will be no documents in VBAK or any table using this domain.
Hope this is clear for u.
Thanks,
Vinod.

How to get maximal value from the data/class for show in Map legend

I make WAD report that using Map Web Item.
I devide to four (4) classes for legend (Generate_Breaks).
I want to change default value for the class by javascript and for this,
I need to get maximal value from the class.
How to get maximal value from the data/class.
please give me solution for my problem.
Many Thx
Eddy Utomo

use this to get the following End_date
<?following-sibling::../END_DATE?>
Try this
<?for-each:/ROOT/ROW?>
==================
Current StartDate <?START_DATE?>
Current End Date <?END_DATE?>
Next Start Date <?following-sibling::ROW/END_DATE?>
Previous End Date <?preceding-sibling::ROW[1]/END_DATE?>
================
<?end for-each?>
o/p
==================
Current StartDate 01-01-1980
Current End Date 01-01-1988
Next Start Date 01-01-1990
Previous End Date
================
==================
Current StartDate 01-01-1988
Current End Date 01-01-1990
Next Start Date 01-01-2005
Previous End Date 01-01-1988
================
==================
Current StartDate 01-01-2000
Current End Date 01-01-2005
Next Start Date
Previous End Date 01

How to select multiple values from the parameters in BI Publisher report

How to select multiple values from the parameter drop down in BI Publisher, and how to handle this mulitple values from the report sql...

Hi kishore,
I have used all the steps as you mentioned in your previous reply....including checking Mulitple Selection Check Box..
Iam able to get the results when I am selecting one value..
and also I am able to handle multiple values the in the query by using IN :Parameter, but seems when we select more than one value from the parameter drop down i think the Bi Publisher is sending the values in concatenated form something ilke
ex: "'ACCOUNT','HR','SALES'" ,and when trying to display the parameters values in the output, its throwing the error as 'missing right paranthesis' ....on the whole do you have any solution which would handle
1.Single selection.
2.Multiple selection.
3.'ALL' Values.
4.Separating the concatenated string into individual strings and dispaly them on the output of the report..etc..in case of Mulitple selection.
Ex:
Concatenated String from BI Publisher:"'ACCOUNT','HR','SALES'"
Expected Output on the report:ACCOUNT,HR,SALES
reply to this would be much appreciated....
thanks,
manoj

How to Show total value in the header 2nd page but based on 1st page footer

How to show total value in header in report builder but i have the total have related with the total in footer.
Example
===============================================
Page 1
Empno Ename Sal
1 Scott 1000
2 ALlen 2000
3 Susi 1000
Total Sal Page 1: 4000
===============================================
Page 2
Total Sal Page 1: 4000 --> How to get it?????
Empno Ename Sal
4 Budi 1000
5 Roger 200
6 George 2000
Total Sal Page 2: 3200
Please Help..
Thanks

hmm .. what i would do is
- create a placeholder column
- create a field in the header and one in the footer
- have the footer field reference the summary column
- have the header field reference the placeholder column
- create a fromat trigger on the footer field to
store the value of the footer into the placeholder column
so when the report is executed and the footer field is formatted, the format trigger stores the current value of the summary in the placeholder. then the pagebreak occures and the header field is formatted .. printing the value.
there might actually be an easier way, just reference the two fields to the same summary column and in theory, since there is nothing happening between the time when the footer is formatted and the header is formatted, the values should be the same .. however this is a theory and i have not actually tested this. since reports does all kinds of fancy optimization this might have unexpected results, but it's worth a try.
thanks,
ph.

How can i transfer a field value in the main report to its sub-report?

How can i transfer a field value in the main report to its sub-report?Please eloberate with example if possible!Thanks... 

You can do a couple of things - one would be to pass the information using the data linking expert. Right click on the subreport, choose 'Change Subreport Links' and select the field(s) you are wanting to pass to the subreport. CRW will build parameters and a record selection formula for you in the subreport, and if that's what you want, then great. But you can also remove the selection formula from the subreport and work with the parameter fields in the subreport however you would like.Alternatively, you can look to passing Shared variables back and forth from the main and subreport. this link talks about the method to do this: http://diamond.businessobjects.com/node/251

How to export some data from the tables of an owner with integrity?

Hi to all,
How to export some data from the tables of an owner with integrity?
I want to bring some data from all tables in a single owner of the production database for development environment.
My initial requirements are: seeking information on company code (emp), contract status (status) and / or effective date of contract settlement (dt_liq_efetiva) - a small amount of data to developers.
These three fields are present in the main system table (the table of contracts). Then I thought about ...
- create a temporary table from the query results table to contract;
- and then use this temporary table as a reference to fetch the data in other tables of the owner while maintaining integrity. But how? I have not found the answer, because: what to do when not there is the possibility of a join between the contract and any other table?
I am considering the possibility of consulting the names of tables, foreign keys and columns above, and create dynamic SQL. Conceptually, something like:
select r.constraint_name "FK name",
r.table_name "FK table",
r.column_name "FK column",
up.constraint_name "Referencing name",
up.table_name "Referencing table",
up.column_name "Referencing column"
from all_cons_columns up
join all_cons_columns r
using (owner, position), (select r.owner,
r.constraint_name fk,
r.table_name table_fk,
r.r_constraint_name r,
up.table_name table_r
from all_constraints up, all_constraints r
where r.r_owner = up.owner
and r.r_constraint_name = up.constraint_name
and up.constraint_type in ('P', 'U')
and r.constraint_type = 'R'
and r.owner = 'OWNERNAME') aux
where r.constraint_name = aux.fk
and r.table_name = aux.table_fk
and up.constraint_name = aux.r
and up.table_name = aux.table_r;
-- + Dynamic SQL
If anyone has any suggestions and / or reuse code to me thank you very much!
After resolving this standoff intend to mount the inserts in utl_file by a table and create another program to read and play in the development environment.
Thinking...
Let's Share!
My thanks in advance,
Philips

Thanks, Peter.
Well, I am working with release 9.2.0.8.0. But the planning is migrate to 10g this year. So my questions are:
With Data Pump can export data just from tables owned for me (SCHEMAS = MYOWNER) parameterizing the volume of data (SAMPLE) and filters to table (QUERY), right? But parameterizing a contract table QUERY = "WHERE status NOT IN (2,6) ORDER BY contract ":
1º- the Data Pump automatically searches for related data in other tables in the owner? ex. parcel table has X records related (fk) with Y contracts not in (2,6): X * SAMPLE records will be randomly exported?
2º- for the tables without relation (fk) and which are within the owner (MYOWNER) the data is exported only based on the parameter SAMPLE?
Once again, thank you,
Philips
Reading Oracle Docs...

How to add some days to the current system date

can anyone help how to add some days to the current date i.e if today is 3-12-2007 and if v add 15 more days then the output should be 18-12-2007

RajeshChandan wrote:
First of all thanks a lot ,and coming to the question i dont mean to change the sysdate instead i want to write a prg. where after entering the current date it should effect with the no.of days that i have given but not the system date .if u can answer please reply for thisAh, I see. In that case, you can use an instance of GregorianCalendar and use it's add(...) method to add days, months, years etc. to it.
http://java.sun.com/javase/6/docs/api/java/util/GregorianCalendar.html
Good luck.

How to assign a value of the bean to a js variable.

Hi,
Im getting some values from the DB which is stored in a list , Now the list is sent across to the jsp through the bean.
I need to get the length of the list
I tried something like this.
<script>
var size = <% rmaLicenseTransferForm.slfextUiElements.size(); %>
</script>rmaLicenseTransferForm is the name of the formBean and slfextUiElements is the name of the list.
I guess this wont work....by the way i using struts framework.....
Thanks

Use the JSTL fn:length tag.

How to hide some functions in the menu bar of flash paper

Do anyone know how to hide some functions in the menu bar of
flash paper? As I want to show a swf file(converted from pdf) on
the website without printing function. How can I do it?
Also, if possible, can anyone know how to hide all functions
on the menu bar except the logo of flash paper?
Thank you very much, it is very urgent.

Here is an article about how to integrate flashPaper into
Director. It has most of the functions that can be executed on
flashPaper. Maybe it will help?
http://www.adobe.com/devnet/director/articles/flashpaper_in_director.html
and here is all his code
http://www.mediamacros.com/item/item-1006687373/
Note: it is for 1.01, but works with 2.0

How to restrict some values in the final report output.

Similar Messages

Maybe you are looking for